Document number:  PL22.16/10-0076 = WG21 N3086
Date:  2010-03-29
Reply to:  William M. Miller
 Edison Design Group, Inc.
 wmm@edg.com

 Beman Dawes
 bdawes@acm.org









C++ CD1 Comment Status

Rev. 7

This document is the final summary of the work of WG21 in addressing National Body comments on Committee Draft document N2800. This material is contained in official form (with adjustments for terminology and procedures outside of WG21) in the Record of Response document, N3075. In case of discrepancy between this document and N3075, the latter is definitive.

In total, 591 comments were received. To date, 276 have been accepted as proposed, 170 have been accepted with modifications, 136 have been rejected, and 0 remain to be addressed. The detailed breakdown:

This document consists of three tables. The first is a table of contents, listing each issue by National Body and comment number and giving its current status. The second is a list of all as-yet unresolved comments, sorted by the responsible party. The third is a comprehensive listing of all the comments received in the same order and with roughly the same organization as in document N2837; the “Disposition” field gives the response, as well as any explanatory comments provided by the responsible party.


SORTED LISTING OF COMMENTS:

In the following table, the “Date” field represents the date on which the Committee affirmed the listed disposition.

ID Responsible Disposition Date Issue Document
CA 1 CWG accepted       
CA 2 LWG accepted    N/A   
CH 1 CWG rejected    794   
CH 2 CWG accepted       
DE 1 CWG accepted       
DE 2 LWG rejected    1153   
DE 3 CWG accepted  2009-10-24  735   
DE 4 CWG accepted  2009-10-24  693   
DE 5 CWG accepted  2009-10-24  731   
DE 6 CWG modified  2009-03-06    N2845 
DE 7 editor rejected       
DE 8 CWG accepted  2009-03-06    N2841 
DE 9 CWG accepted  2009-07-18  720  N2927 
DE 10 CWG accepted  2009-10-24  731   
DE 11 CWG accepted  2009-03-06    N2841 
DE 12 CWG accepted  2009-10-12  731   
DE 13 CWG accepted  2009-07-18  732  N2927 
DE 14 CWG accepted  2009-10-24  730   
DE 15 CWG accepted  2009-07-18     
DE 16 LWG modified    902   
DE 17 LWG modified    1078   
DE 18 LWG modified    1097,1098    
DE 20 editor accepted       
DE 21 LWG modified    817   
DE 22 LWG accepted    1023   
DE 23 CWG accepted  2009-10-24  699   
DE 24 LWG modified    922   
DE 25 CWG modified  2009-10-24  831   
FI 1 CWG accepted  2009-07-18  939  N2928 
FI 2 CWG rejected       
FI 3 CWG rejected       
FI 4 editor accepted       
FI 5 editor accepted       
FI 6 LWG rejected       
FI 7 editor accepted       
FR 1 CWG rejected       
FR 2 LWG rejected    1156   
FR 3 editor accepted       
FR 4 editor rejected       
FR 5 CWG accepted  2010-03-13  690  N3055 
FR 6 editor accepted       
FR 7 editor rejected       
FR 8 editor rejected       
FR 9 editor accepted       
FR 10 CWG accepted  2010-03-13  788   
FR 11 editor accepted       
FR 12 CWG accepted    957   
FR 13 editor modified       
FR 14 editor accepted       
FR 15 editor accepted       
FR 16 CWG accepted  2009-10-24  481   
FR 17 CWG modified  2009-07-18  791   
FR 18 editor accepted       
FR 19 CWG rejected       
FR 20 CWG rejected       
FR 21 CWG rejected       
FR 22 CWG rejected       
FR 23 CWG accepted      N3078 
FR 24 CWG rejected       
FR 25 CWG modified       
FR 26 CWG rejected       
FR 27 CWG rejected       
FR 28 CWG accepted  2009-03-06    N2841 
FR 29 CWG modified  2010-03-13  823   
FR 30 CWG rejected       
FR 31 CWG modified  2009-07-18     
FR 32 LWG modified    902   
FR 33 editor accepted       
FR 34 editor accepted       
FR 35 LWG rejected    1154   
FR 36 editor accepted       
FR 37 editor accepted       
FR 38 LWG accepted    1155   
FR 39 editor rejected       
JP 1 editor accepted       
JP 2 editor accepted       
JP 3 editor accepted       
JP 4 editor accepted       
JP 5 CWG accepted  2009-10-24  790   
JP 6 editor accepted       
JP 7 editor accepted       
JP 8 CWG accepted  2010-03-13  743  N3049 
JP 9 CWG rejected       
JP 10 CWG rejected       
JP 11 CWG rejected       
JP 12 CWG accepted  2009-10-24  699   
JP 13 editor accepted       
JP 14 CWG accepted  2010-03-13  812   
JP 15 editor rejected       
JP 16 editor accepted       
JP 17 CWG rejected       
JP 18 CWG rejected       
JP 19 editor accepted       
JP 20 CWG modified  2009-07-18  825   
JP 21 LWG rejected       
JP 22 editor rejected       
JP 23 LWG modified    1003   
JP 24 editor accepted       
JP 25 editor accepted       
JP 26 LWG modified    1005   
JP 27 LWG accepted    1066   
JP 28 LWG rejected       
JP 29 LWG modified    1007   
JP 30 LWG rejected    1132   
JP 31 LWG rejected    1008   
JP 32 LWG rejected       
JP 33 LWG modified    1016   
JP 34 editor accepted       
JP 35 editor accepted       
JP 36 editor accepted       
JP 37 editor accepted       
JP 38 LWG modified    817   
JP 39 LWG modified    1024   
JP 40 editor accepted       
JP 41 LWG rejected       
JP 42 editor accepted       
JP 43 editor accepted       
JP 44 LWG modified    1030   
JP 45 LWG modified    1032   
JP 46 LWG modified    1081   
JP 47 editor accepted       
JP 48 LWG modified    1081   
JP 49 LWG modified    1082   
JP 50 LWG accepted    991   
JP 51 editor accepted       
JP 52 LWG modified    1083   
JP 53 LWG modified    1083   
JP 54 editor accepted       
JP 55 editor accepted       
JP 56 editor accepted       
JP 57 editor accepted       
JP 58 editor accepted       
JP 59 editor accepted       
JP 60 LWG rejected       
JP 61 editor accepted       
JP 62 LWG rejected       
JP 63 LWG accepted  2009-03-06  874  N2836 
JP 64 LWG rejected    1243   
JP 65 LWG modified    1094   
JP 66 LWG modified    1094   
JP 67 LWG modified    1141   
JP 68 LWG modified    1141   
JP 69 LWG modified    1141   
JP 71 editor accepted       
JP 72 LWG modified    1141   
JP 73 LWG rejected    1150   
JP 74 LWG accepted    1014   
JP 75 LWG rejected       
JP 76 LWG modified    1089   
JP 77 LWG modified    1139   
JP 78 editor accepted       
JP 79 LWG modified    1139   
JP 80 editor accepted       
JP 81 LWG modified    1139   
UK 1 editor rejected       
UK 2 editor rejected       
UK 3 CWG rejected    783   
UK 4 CWG rejected       
UK 5 editor accepted       
UK 6 CWG rejected    784   
UK 7 CWG accepted  2009-10-24  785   
UK 8 CWG accepted  2009-10-24  785   
UK 9 CWG modified  2010-03-13  787   
UK 10 CWG accepted  2009-03-06    N2841 
UK 11 CWG modified  2010-03-13  789  N3077 
UK 12 CWG modified  2010-03-13  787   
UK 13 CWG accepted  2009-10-24  832   
UK 14 editor accepted       
UK 15 CWG rejected       
UK 16 editor accepted       
UK 17 CWG rejected       
UK 18 CWG rejected       
UK 19 CWG accepted  2009-10-24     
UK 20 editor modified       
UK 21 editor modified       
UK 22 CWG accepted  2010-03-13  633  N2993 
UK 23 CWG rejected    758   
UK 24 CWG rejected       
UK 25 CWG accepted  2009-03-06    N2841 
UK 26 CWG accepted  2010-03-13  570  N2993 
UK 27 CWG accepted  2009-03-06    N2841 
UK 28 CWG accepted  2009-03-06    N2841 
UK 29 CWG rejected       
UK 30 CWG modified  2009-07-18  791   
UK 31 CWG accepted  2009-03-06    N2841 
UK 32 CWG accepted  2009-03-06    N2841 
UK 33 CWG accepted  2009-03-06    N2841 
UK 34 editor accepted       
UK 35 editor accepted       
UK 36 CWG accepted  2009-03-06    N2841 
UK 37 CWG rejected       
UK 38 CWG rejected       
UK 39 CWG accepted  2009-07-18  759  N2927 
UK 40 CWG accepted  2009-07-18  796  N2927 
UK 41 CWG modified  2009-03-06    N2845 
UK 42 CWG accepted  2010-03-13  797  N3052 
UK 43 CWG modified  2009-03-06    N2845 
UK 44 CWG rejected       
UK 45 CWG rejected  2009-07-18  795   
UK 46 CWG modified  2009-03-06    N2845 
UK 47 CWG accepted  2009-03-06    N2841 
UK 48 editor accepted       
UK 49 CWG accepted  2009-10-24  699   
UK 50 CWG accepted  2009-10-24  806   
UK 51 CWG rejected    807   
UK 52 editor modified       
UK 53 CWG rejected    798   
UK 54 CWG accepted  2009-03-06    N2841 
UK 55 CWG accepted  2009-03-06  799  N2841 
UK 56 CWG modified  2009-03-06    N2841 
UK 57 CWG rejected    800   
UK 58 CWG accepted  2009-10-24  801   
UK 59 CWG accepted  2009-03-06    N2841 
UK 60 editor accepted       
UK 61 editor accepted       
UK 62 CWG accepted  2009-03-06    N2841 
UK 63 editor accepted       
UK 64 editor accepted       
UK 65 CWG modified  2009-03-06    N2841 
UK 66 CWG accepted  2009-03-06    N2841 
UK 67 CWG accepted  2009-03-06    N2841 
UK 68 CWG accepted  2009-03-06    N2841 
UK 69 CWG modified  2009-07-18  802   
UK 70 CWG accepted  2009-10-24  803   
UK 71 CWG accepted  2009-10-24  804   
UK 72 CWG accepted  2009-07-18  805  N2932 
UK 73 CWG rejected       
UK 74 CWG rejected       
UK 75 editor accepted       
UK 76 CWG rejected       
UK 77 editor accepted       
UK 78 LWG modified  2009-07-18  1001  N2930 
UK 79 CWG modified  2009-07-18    N2930 
UK 80 editor modified       
UK 81 CWG rejected       
UK 82 CWG rejected       
UK 83 CWG accepted  2010-03-13  808   
UK 84 CWG accepted  2009-03-06    N2841 
UK 85 CWG accepted  2009-10-24  940   
UK 86 CWG accepted  2009-10-24  809   
UK 87 CWG accepted  2010-03-13  810   
UK 89 CWG accepted  2010-03-13  811   
UK 90 editor accepted       
UK 91 CWG modified  2009-03-06    N2841 
UK 92 editor accepted       
UK 93 editor accepted       
UK 94 editor accepted       
UK 95 CWG accepted  2009-07-18  746   
UK 96 CWG accepted  2009-03-06  628   
UK 97 editor accepted       
UK 98 LWG modified    1055   
UK 99 CWG rejected       
UK 100 CWG rejected       
UK 101 CWG rejected    813   
UK 102 editor modified       
UK 103 CWG accepted  2009-07-18  815  N2933 
UK 104 editor rejected       
UK 105 CWG rejected       
UK 106 editor accepted       
UK 107 editor accepted       
UK 108 CWG accepted  2009-07-18  816   
UK 109 editor accepted       
UK 110 CWG accepted  2009-03-06    N2841 
UK 111 editor accepted       
UK 112 editor modified       
UK 113 editor accepted       
UK 114 CWG modified       
UK 115 CWG modified  2010-03-13  820  N3065 
UK 116 CWG modified  2009-07-18  821   
UK 117 CWG rejected    822   
UK 118 editor accepted       
UK 119 CWG modified  2009-07-18  791   
UK 120 editor accepted       
UK 121 editor accepted       
UK 122 CWG modified  2009-07-18     
UK 123 CWG modified  2009-07-18     
UK 124 editor accepted       
UK 125 CWG modified  2009-07-18     
UK 126 editor accepted       
UK 127 editor modified       
UK 128 editor accepted       
UK 129 CWG modified  2009-07-18  826   
UK 130 CWG accepted  2010-03-13  828   
UK 131 CWG accepted  2009-03-06    N2844 
UK 132 CWG accepted  2009-03-06    N2841 
UK 133 CWG accepted  2009-03-06    N2841 
UK 134 editor accepted       
UK 135 CWG rejected    829   
UK 136 CWG accepted  2010-03-13  830  N3051 
UK 137 editor accepted       
UK 138 editor rejected       
UK 139 CWG accepted  2009-03-06    N2841 
UK 140 editor accepted       
UK 141 editor accepted       
UK 142 editor accepted       
UK 143 editor accepted       
UK 144 editor accepted       
UK 145 editor accepted       
UK 146 editor accepted       
UK 147 editor accepted       
UK 148 editor accepted       
UK 149 editor modified       
UK 150 LWG rejected       
UK 151 editor modified       
UK 152 LWG rejected    1064   
UK 153 editor accepted       
UK 154 editor rejected       
UK 155 editor accepted       
UK 156 editor accepted       
UK 157 editor m,odified       
UK 158 editor accepted       
UK 159 editor accepted       
UK 160 editor rejected       
UK 161 editor rejected       
UK 162 editor accepted       
UK 163 LWG accepted    997   
UK 164 editor modified       
UK 165 LWG rejected    1156   
UK 166 editor accepted       
UK 167 editor accepted       
UK 168 LWG modified    1065   
UK 169 LWG rejected    992   
UK 170 LWG rejected    1002   
UK 171 editor accepted       
UK 172 LWG modified    1264   
UK 173 LWG accepted    Doc   
UK 174 editor accepted       
UK 175 LWG modified    1157   
UK 176 editor modified       
UK 177 editor accepted       
UK 178 editor rejected       
UK 179 LWG modified    1004   
UK 180 LWG rejected       
UK 181 editor accepted       
UK 182 LWG rejected       
UK 184 editor rejected       
UK 185 editor accepted       
UK 186 editor accepted       
UK 187 LWG modified    1144   
UK 188 LWG accepted    993   
UK 189 LWG modified    1066   
UK 190 LWG accepted    1006   
UK 191 editor modified       
UK 192 CWG accepted  2009-07-18  805  N2932 
UK 193 LWG modified    994   
UK 194 LWG accepted    Doc   
UK 195 LWG modified    Doc   
UK 196 LWG modified    Doc   
UK 197 LWG rejected       
UK 198 editor accepted       
UK 199 LWG modified    1015   
UK 200 LWG rejected       
UK 201 LWG rejected       
UK 202 editor accepted       
UK 203 editor accepted       
UK 204 LWG rejected    1020   
UK 205 LWG accepted    1019   
UK 206 LWG modified    975   
UK 207 editor accepted       
UK 208 LWG modified    978   
UK 209 LWG modified    1026   
UK 210 LWG modified    1029   
UK 211 LWG accepted    1021   
UK 212 editor modified       
UK 213 LWG modified    1027   
UK 214 LWG modified    1028   
UK 215 editor accepted       
UK 216 LWG modified    1081   
UK 217 editor accepted       
UK 218 LWG modified    1170   
UK 219 editor accepted       
UK 220 LWG modified    825   
UK 221 editor accepted       
UK 222 LWG modified    1034   
UK 223 LWG modified  2009-03-06  Doc  N2840 
UK 224 LWG modified  2009-03-06  Doc  N2840 
UK 225 editor accepted       
UK 226 LWG rejected    1035   
UK 227 editor accepted       
UK 228 editor accepted       
UK 229 editor accepted       
UK 230 LWG rejected       
UK 231 LWG modified    1036   
UK 232 LWG accepted    1037   
UK 233 LWG accepted    1038   
UK 234 LWG accepted    1039   
UK 235 editor accepted       
UK 236 editor modified       
UK 237 editor accepted       
UK 238 LWG modified    1040   
UK 239 LWG rejected    1041   
UK 240 LWG modified       
UK 241 LWG duplicate      N2840 
UK 242 editor accepted       
UK 243 LWG rejected       
UK 244 LWG rejected    1042   
UK 245 LWG rejected       
UK 246 LWG modified    1091   
UK 247 LWG rejected       
UK 248 editor accepted       
UK 249 LWG rejected       
UK 250 LWG modified    1084   
UK 251 LWG rejected    1009   
UK 252 editor accepted       
UK 253 editor accepted       
UK 254 LWG modified       
UK 255 LWG modified       
UK 256 LWG modified       
UK 257 LWG rejected       
UK 258 LWG modified    1085   
UK 259 LWG rejected       
UK 260 LWG modified       
UK 261 LWG rejected       
UK 262 LWG modifed       
UK 263 LWG modified    1010   
UK 264 LWG modifed       
UK 265 LWG modified    1079   
UK 266 LWG modifed       
UK 267 LWG modified       
UK 268 editor accepted       
UK 269 editor accepted       
UK 270 LWG modified    940   
UK 271 LWG modified    1011   
UK 272 LWG rejected       
UK 274 editor accepted       
UK 275 LWG rejected       
UK 276 LWG rejected       
UK 277 LWG modified    1012   
UK 278 LWG rejected       
UK 279 LWG rejected    1051   
UK 280 editor accepted       
UK 281 LWG rejected    1052   
UK 282 LWG modified    901   
UK 283 LWG rejected       
UK 284 LWG modified    1086   
UK 285 editor accepted       
UK 286 editor rejected       
UK 287 LWG modified    788   
UK 288 editor rejected       
UK 289 editor rejected       
UK 290 editor accepted       
UK 291 LWG rejected       
UK 292 editor rejected       
UK 293 editor accepted       
UK 294 LWG rejected       
UK 295 LWG rejected    1053   
UK 296 LWG rejected       
UK 297 editor rejected       
UK 298 editor accepted       
UK 299 editor modified       
UK 300 LWG accepted       
UK 301 LWG modified    1087   
UK 302 editor rejected       
UK 303 editor rejected       
UK 304 editor rejected       
UK 305 LWG accepted    1013   
UK 306 LWG accepted  2009-03-06  N/A  N2836 
UK 307 editor accepted       
UK 308 LWG modified    1141   
UK 309 LWG modified    1142   
UK 310 LWG modified    1142   
UK 311 LWG modified    1143   
UK 312 LWG modified    1145   
UK 313 LWG modified    926   
UK 314 LWG rejected    1263   
UK 315 editor accepted       
UK 316 LWG modified    723   
UK 317 LWG modifed    1014   
UK 318 editor accepted       
UK 319 LWG accepted    909   
UK 320 LWG modified    1139   
UK 321 editor modified       
UK 322 LWG modified    1158   
UK 323 LWG modified    929   
UK 324 LWG modified    1182   
UK 325 LWG accepted    1044   
UK 326 LWG accepted    1045   
UK 327 LWG modified    1159   
UK 328 LWG modified    1159   
UK 329 LWG modified    1046   
UK 330 editor accepted       
UK 331 LWG modified    1160   
UK 332 editor accepted       
UK 333 LWG modified    1139   
UK 334 LWG accepted    1047   
UK 335 LWG modified    1048   
UK 336 LWG modified    1161   
UK 337 LWG modified    1162   
UK 338 LWG modified    1163   
UK 339 LWG accepted    1049   
UK 340 LWG accepted    1050   
UK 341 LWG rejected    1164   
UK 342 LWG modified    1088   
UK 343 LWG modified    1165   
UK 344 CWG rejected       
US 1 CWG accepted       
US 2 LWG accepted    N/A   
US 3 editor modified       
US 4 editor accepted       
US 5 editor accepted       
US 6 CWG rejected       
US 7 editor accepted       
US 8 editor modified       
US 9 editor accepted       
US 10 editor accepted       
US 11 editor accepted       
US 12 CWG modified  2009-03-06    N2841 
US 13 CWG rejected       
US 14 CWG accepted  2009-03-06    N2841 
US 15 CWG rejected       
US 16 CWG accepted  2009-10-24  785   
US 17 CWG accepted  2009-10-24  786   
US 18 editor accepted       
US 19 editor accepted       
US 20 CWG rejected       
US 21 editor rejected       
US 22 editor accepted       
US 23 editor accepted       
US 24 CWG accepted  2009-10-24  792   
US 25 editor rejected       
US 26 CWG accepted  2010-03-13  793   
US 27 editor accepted       
US 28 editor accepted       
US 29 CWG accepted  2009-07-18  762  N2927 
US 30 CWG accepted  2009-07-18  762  N2927 
US 31 CWG accepted  2009-07-18  752  N2927 
US 32 editor accepted       
US 33 CWG modified  2009-07-18  680  N2927 
US 34 editor accepted       
US 35 editor accepted       
US 36 CWG accepted  2009-10-24  717   
US 37 editor accepted       
US 38 editor rejected       
US 39 CWG rejected       
US 40 CWG modified  2020-03-13  814  N3050 
US 41 CWG accepted  2009-07-18  939  N2928 
US 42 CWG accepted  2010-03-13  817   
US 43 CWG rejected       
US 44 editor accepted       
US 45 CWG accepted  2010-03-13  818  N3079 
US 46 CWG accepted  2009-03-06    N2844 
US 49 editor accepted       
US 50 CWG rejected    819   
US 51 editor accepted       
US 52 editor accepted       
US 53 CWG modified  2009-07-18  824   
US 54 CWG accepted  2009-07-18     
US 55 editor accepted       
US 56 editor rejected       
US 57 editor rejected       
US 58 editor modified       
US 59 CWG accepted  2009-07-18     
US 60 CWG modified  2009-07-18  827   
US 61 LWG duplicate    N/A   
US 62 LWG duplicate    N/A   
US 63 LWG modified    1151   
US 64 editor accepted       
US 65 LWG modified    1075   
US 66 LWG modified    1017   
US 67 editor modified       
US 68 editor accepted       
US 69 editor modified       
US 70 LWG modified    1018   
US 71 editor modified       
US 72 LWG modified    817   
US 73 CWG accepted  2009-03-06  750  N2845 
US 74.1 LWG modified  2009-03-06  1075   
US 74.2 editor modified       
US 75 LWG modified  2009-03-06  Doc  N2840 
US 77 LWG modified    1166   
US 78 LWG rejected    1031   
US 79 LWG modified    932   
US 80 editor modified       
US 81 LWG accepted    934   
US 82 editor accepted       
US 83 editor accepted       
US 84 LWG modified    1140   
US 85 LWG modified    1141   
US 86 LWG modified    1142   
US 87 LWG modified    1143   
US 88 LWG modified    1146   
US 89 editor accepted       
US 90 LWG modified    908, 1147   
US 91 LWG modified    1043  N2925 
US 92 LWG rejected       
US 93 LWG modified    1139   
US 94 editor accepted       
US 95 LWG rejected       
US 96 LWG rejected       
US 97 LWG modified  2009-03-06  Doc  N2802 
US 98 LWG duplicate       

UNRESOLVED COMMENTS:

The following table lists the comments for which no resolution has yet been proposed.

ID Responsible Issue

ALL COMMENTS

ID Ref Comment Proposed Resolution Owner Issue Disposition
FR 1 General Comment   Interactions between several new features appear obscure, and very few examples are offered to guide understanding of the formal text on interaction between these new additions. We worry about the complexity of the programming model so created.     CWG    REJECTED

Need more information from NB, including a suggested resolution, in order to respond effectively to this comment.  
US 1 1-16   The active issues identified in WG21 N2803, C++ Standard Core Language Active Issues, must be addressed and appropriate action taken.
http://www.open-std.org/jtc1/sc22/wg21/docs/cwg_active.html  
Appropriate action would include making changes to the CD, identifying an issue as not requiring a change to the CD, or deferring the issue to a later point in time.   CWG    ACCEPTED  
CA 1   There are quite a number of defects for the current CD recorded in SC22/WG21-N2803 and N2806   Consider these comments and update ISO/IEC CD 14882 accordingly   CWG    ACCEPTED  
DE 1 1 through 16   DE-1 Consider addressing a significant part of the unresolved core language issues presented in WG21 document N2791 "C++ Standard Core Language Active Issues, Revision 59", available at http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2791.html .     CWG    ACCEPTED  
CH 2 all   The issues on the issues lists shall be addressed before the standard becomes final.     CWG    ACCEPTED  
US 3 all   Latin abbreviations are presented incorrectly.   Italicize all Latin abbreviations, append commas after each occurrence of i.e. and e.g., and remove extraneous space after each such abbreviation.   editor    ACCEPTED with MODIFICATIONS

The "Chicago Manual of Style" says that i.e. and e.g. are never italicized and always followed by a comma, so that's how they now appear.  
FR 3 1 [intro.scope] ¶ 2   C++ is split at the end of line.     editor    ACCEPTED  
US 4 1.1 ¶ 2   There is a bad line break in "C++".     editor    ACCEPTED  
UK 1
[214]
1.1 ¶ 2   List of additional facilities over C has been extended with this standard, so should be mentioned in the introductory material.   Add the following to the list in 1.1p2: atomic operations concurrency alignment control user-defined literals attributes   editor    REJECTED

This list is highlights, not all differences. Okay as is.  
FR 4 1.2 [intro.refs] ¶ 1   Is the lack of reference to ISO/CEI 9899/AC3:2007 voluntary?     editor    REJECTED

We are unaware of this document.  
UK 2
[215]
1.2 ¶ 1   We recommend taking the latest update to each listed standard, yet the C standard is quite deliberately held back to the 1990 version without comment.+   ... not sure ...   editor    REJECTED

1.2 (Normative references) cites 9899:1999, 9899:1999/Corl.1:2001, and 9899:1999/Cor.2:2004, which collectively constitute C99.  
UK 3
[217]
1.3.1   The definition of an argument does not seem to cover many assumed use cases, and we believe that is not intentional.   Revise the definition of argument to answer question such as: Are lambda-captures arguments? Are type names in a throw-spec arguments? 'Argument' to casts, typeid, alignof, alignas, decltype and sizeof? why in x[arg] : arg is not an agrument, but the value forwarded to operator[]() is ? Does not apply to operators as call-points not bounded by parenthises ? Similar for copy initialization and conversion? what are Deduced template 'arguments'? what are 'default arguments'? can attributes have arguments? what about concepts, requires clauses and concept_map instantiations? What about user-defined literals where parens are not used?   CWG  783  REJECTED

An issue has been opened for consideration in a future revision of the Standard.  
UK 4
[216]
1.3.3   This definition is essentially worthless, as it says nothing about what distinguished a diagnostic message from other output messages provided by the implementation   ... add something about the diagnostic message being a message issues by the implementation when translating a program that violates the rules of the standard. ...   CWG    REJECTED

Characterizing the output of a translator is essentially a quality-of-implementation issue and beyond the scope of the Standard.  
FR 5 1.3.4 [defns. dynamic.type]   "The dynamic type of an rvalue expression is its static type." Is this true with rvalue references?     CWG  690  ACCEPTED

See paper N3055 
US 5 1.3.5   The wording is unclear as to whether it is the input or the implementation "that is not a well-formed program".   Reword to clarify that it is the input that is here considered not well-formed.   editor    ACCEPTED  
FR 6 1.3.6 [defns. impl.defined]   There is a page break between the title and the paragraph.     editor    ACCEPTED  
FR 7 1.3.13 [defns. undefined]   [intro.execution]/5 explicitly allows non causal undefined behaviour,   Adding it to the note outlying possible undefined behaviours.   editor    REJECTED

This is covered by the first alternative in the note, "ignoring the situation completely with unpredictable results".  
US 6 1.3.14   Unspecified behavior does not clearly state whether or not undefined behavior is permitted. (The standard says that "usually, the range of possible behaviors is delineated", but what happens if the range is not delineated? Is a crash, or worse, allowed?)   Clearly state whether or not Unspecified behavior includes undefined behavior.   CWG    REJECTED

The cited text is in a note and thus non-normative. The acceptable range for unspecified behavior is a quality-of-implementation issue.  
FR 8 1.4 [intro. compliance] ¶ 8   The paragraph as its stands seems to require that violations of the ODR (which make a program ill-formed) are required to be diagnosed if the program also uses an extension which defines some cases of ODR.     editor    REJECTED

Yes, that seems to be the intention. That's the mechanism for extensions: issue a diagnostic and then do the extension.  
UK 5
[1]
1.5   Missing checklist of implementation defined behaviour (see ISO/IEC TR 10176, 4.1.1p6)   Provide a new annex with the missing checklist   editor    ACCEPTED  
UK 6
[2]
1.5   Missing annex describing potential incompatibility to previous edition of the standard (see ISO/IEC TR 10176, 4.1.1p9)   Provide a new annex with the missing documentation. See n2733(08-0243) for a starting point   CWG  784  REJECTED

An issue has been opened for consideration in a future revision of the Standard.  
US 7 1.5 ¶ 2   There is no mention of Clause 17.   Include Clause 17 among the list of Clauses that specify the Standard Library.   editor    ACCEPTED  
US 8 1.5 ¶ 2   The paragraph omits to mention concepts and concept maps among its list of entities defined in the Standard Library.   Mention concepts and concept maps among the list of entities.   editor    ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
US 9 1.6 ¶ 1   The syntax description does not account for lines that wrap.     editor    ACCEPTED  
US 10 1.7 ¶ 3   The term thread is used before defined.   Reference 1.10 [intro.multithread].   editor    ACCEPTED  
US 11 1.7 ¶ ¶ 3 last sent.   The phrase “threads of execution” should be accompanied by a reference to [intro.multithread].   Insert the recommended reference.   editor    ACCEPTED  
US 12 1.7 ¶ ¶ 3 first sent.   A memory location is not an object as the sentence claims.   Clarify that a memory location “holds” an object rather than that it “is” an object.   CWG    ACCEPTED with MODIFICATIONS

This is the definition of the term “memory location” for reference in the following text. The current wording is appropriate for that usage; the formatting will be changed to indicate that the term is being defined.

See paper N2841 
US 13 1.7 ¶ ¶ 3 last sent.   It is unclear what is meant by memory locations that are "separate": are they distinct? non-overlapping? how much "separation" is needed?   Provide either a better definition of “separate” or reword (this and subsequent paragraphs) to avoid this term.   CWG    REJECTED

The current text is clear enough: “separate” in the sense of “distinct” is common usage elsewhere in the Standard.  
US 14 1.7 ¶ ¶ 4   The phrase "no matter what the sizes of the intervening bit-fields happen to be" contradicts the claim of separation "by a zero-length bit-field declaration".   Delete the “no matter…” phrase, or resolve the contradiction in a different way.   CWG    ACCEPTED

See paper N2841 
US 15 1.7 ¶ ¶ 5   A struct does not “contain” memory locations.   Reword so that a struct is “held in” one or more memory locations.   CWG    REJECTED

The phrasing is consistent with the definition of “memory location” given in paragraph 3.  
US 16 1.9   The discussion of observable behavior in 1.9 is not consistent with the addition of threads to the language. Volatile reads and writes and other observable actions no longer occur in a single "sequence”.   Remove/replace various occurrences of "sequence" in 1.9.   CWG  785  ACCEPTED  
UK 8
[222]
1.9 ¶ 5   With parallel execution there is no longer the idea of a single execution sequence for a program. Instead, a program may be considered a set of exectution sequences.   Update first sentance as: A conforming implementation executing a well-formed program shall produce the same observable behavior as one of the possible SETS OF execution sequences of the corresponding instance of the abstract machine CONFORMING TO THE MEMORY MODEL (1.10) with the same program and the same input.   CWG  785  ACCEPTED  
UK 7
[218]
1.9 ¶ 6   Does the term 'sequence' imply all reads/writes through volatile memory much be serialized, and cannot occur in parallel on truly parallel hardware? Allow for multiple concurrent sequences where each sequence is constrained by this observable behaviour rule, and multiple sequences are constrained by the memory model and happens-before relationships defined in 1.10   Replace 'sequence' with 'sequences'.   CWG  785  ACCEPTED  
FR 9 1.9 [intro.execution] ¶ 16   This example use int *v while the other examples seems to use notation like int* v.     editor    ACCEPTED  
US 17 1.10 ¶ 1   This definition of “thread” is poor, and assumes the user already knows what multi-threaded means (probably true!). In particular, it does not deal adequately with the concept that all threads share the same address space.   Replace first sentence of para 1 as follows:
Under a hosted implementation, a C++ program can have more than one thread of execution (a.k.a. thread) running concurrently. Each thread is a single flow of control within a program. Anything whose address may be determined by a thread, including but not limited to static objects, storage obtained via new or by any dynamic allocator, directly addressable storage obtained through implementation-defined functions, and automatic variables, are accessible to all threads in the same program.
 
CWG  786  ACCEPTED  
UK 9
[133]
2.1 ¶ 2, 4   Undefined behaviour is a drastic way to silently ignore minor issues. The cases in this paragraph could be easily defined. In this case opt for conditionally supported behaviour, which mandates a diagnostic if the compiler is not prepared to handle the syntax consistently.   Replace undefined behaviour with conditionally supported behavior. Conditional behaviour may be implementation defined, although suggest there is a reasonable default in each case. For creating a universal-character name, splice text to create a universal-character. In the case of a file ending without a newline, treat as if the newline was implictly added, with an empty line to follow if the last character was a back-slash.   CWG  787  ACCEPTED with MODIFICATIONS

The undefined behavior with respect to creation of universal character names is intended to facilitate a variety of implementation techniques for supporting extended characters by making it impossible in a well-defined program to determine which technique was actually used. There was no consensus to change that approach at this time. The remaining issues have been addressed.  
UK 10
[134]
2.1 ¶ 3   Implementation defined seems unnecessarily burdensome for negligible gain. I am yet to see code that depended on whether non-empty sequences of whitespace were concatenated. Better left unspecified.   How the compiler treats non-empty sequences of whitespace should be left unspecified, rather than implementation-defined.   CWG    ACCEPTED

See paper N2841 
FR 10 2.1 [lex.phases]/5 and 2.2 [lex.charset]/3   [defns.multibyte] "the extended character set."

[lex.charset]/3 cited below implies that there is an extended character set per locale.

[lex.phases]/5 "Each [...] universal-character-name [...] is converted to the corresponding member of the execution character set"

[lex.charset]/3 "The values of the members of the execution character sets are implementation defined, and any additional members are locale-specific."

Together they seem to imply that what is locale-specific is if a value is valid or not for the current locale, not the representation of a given universal character.

This is not the behaviour of at least some compilers I've access to which are allowing different codes for the same abstract character in different locale. During phase 5, they are using an implementation defined char set.  
  CWG  788  ACCEPTED  
UK 11
[135]
2.3   Trigraphs are a complicated solution to an old problem, that cause more problems than they solve in the modern environment. Unexpected trigraphs in string literals and occasionally in comments can be very confusing for the non-expert.   Deprecate the whole of 2.3 and move it to appendix D.   CWG  789  ACCEPTED with MODIFICATIONS

Trigraphs are in active use in some user communities, so we have decided not to deprecate them. The resolution adopted prevents recognition of trigraphs appearing inside raw strings.

See paper N3077 
UK 12
[137]
2.4, 2.8 ¶ 2   This undefined behaviour in token concatenation is worrying and we believe hard to justify. An implementation should either support this in a defined way, or issue a diagnosic. Documenting existing practice should not break existing implementations, although unconditionally requiring a diagnostic would lead to more portable programs.   Replace undefined behaviour with conditionally supported behaviour with implementation defined semantics.   CWG  787  ACCEPTED with MODIFICATIONS

The undefined behavior with respect to creation of universal character names is intended to facilitate a variety of implementation techniques for supporting extended characters by making it impossible in a well-defined program to determine which technique was actually used. There was no consensus to change that approach at this time. The remaining issues have been addressed.  
US 18 2.4 ¶ ¶ 2   The paragraph begins with an empty line.   Delete the empty line.   editor    ACCEPTED  
FR 11 2.4 [lex.pptokens] ¶ 3   There are spurious empty lines.     editor    ACCEPTED  
FR 12 2.5 [lex.digraph] and 2.11 [lex.key]/2   The alternative representations are reserved as such even in attribute. Is that what is wanted?     CWG  957  ACCEPTED  
FI 2 2.5 ¶ Table 2   Add eq, for spelling out == in order to distinguish it from the assignment operator.   See eq-keyword.doc, eq-keyword.ppt   CWG    REJECTED

Adding a new keyword would break existing code that uses eq as an identifier.  
UK 13
[138]
2.9 ¶ 2   This text is confusing in isolation, as it implies pp-numbers do not have a value in translation phase 4 when evaluating #if preprocessor expressions.   Add a note with a cross-refernce to 16.1 that a pp-number may briefly acquire a value during translation phase 4 while evaluating #if expressions.   CWG  832  ACCEPTED  
UK 14
[395]
2.11 ¶ table 3   The table is nearly sorted, but not quite. It was sorted in previous versions of the standard.   Sort the table.   editor    ACCEPTED  
JP 1 2.11 ¶ Table 3   Keywords in the table are listed disorderly. Also, a part of a frame of the table is not drawn.   Sort it in alphabetical order. Complete the table frame.   editor    ACCEPTED  
US 19 2.13.1 ¶ Table 5, rows “l or L” and “ll or LL”   The final entry in the last column (“unsigned long int”) is incorrect.   Replace the incorrect entries by “unsigned long long int”.   editor    ACCEPTED  
US 20 2.13.1, 2.13.3   Long strings of digits in literals are a continuing problem in the production and maintenance of programs.   Adopt the 1983 technology of Ada and use underscores to separate digits. http://www.open-std.org/JTC1/SC22/WG21/docs/papers/2007/n2281.html   CWG    REJECTED

This was already considered and rejected.  
UK 15
[139]
2.13.2 ¶ 2   Inconsistency between definition of a multicharacter literal and a wide character literal containing multiple c-chars.   Define the term multicharacter wide literal for a wchar_t literal containing multiple elements, and specify its type is integer (or wider)   CWG    REJECTED

The current specification is well-defined, and there was no consensus for changing it.  
UK 16
[140]
2.13.2 ¶ 3   Not immediately clear why the question mark needs escaping. A note would help.   Add a note explaining that the ? character may need escaping to avoid accidentally creating a trigraph.   editor    ACCEPTED  
JP 2 2.13.4 ¶ 1st para, 2nd line   Typo, R"..." should be R"[...]"   Correct typo.   editor    ACCEPTED  
JP 3 2.13.4 ¶ 2nd paragraph   We think that the explanation of d-char-sequence is not enough.   Add the following.
  1. Add the following to the explanation of d-char-sequence, more easily to understand.

    ...prefix is a raw string literal. The d-char-sequence is used as delimiter. The terminating d-char-sequence of ...

  2. Add the following note that there are square brackets in r-char-sequence.

    [Note:
      char foo[] =
      R"delimiter[[a-z] specifies a range
      which matches any lowercase letter
      from "a" to "z".]delimiter";
    
    the expression statement behaves exactly the same as
      char foo[] = "[a-z] specifies a range
      which matches any lowercase letter
      from \"a\" to \"z\".";
    
    end note]
 
editor    ACCEPTED  
JP 4 2.13.4 ¶ 3rd para, 1st line of example   Typo. Lack of a necessary backslash in the first line of the example as follows:
  const char *p = R"[a
  b
  c]";
        
should be
  const char *p = R"[a\
  b
  c]";
 
Correct typo.   editor    ACCEPTED  
US 21 2.13.4 ¶ ¶ 3   The paragraph, marked as a Note, contains an embedded example not marked as such.   Denote the code (and perhaps also its commentary) as an Example.   editor    REJECTED

Marking things as Note or Example distinguishes them from normative text. Examples in Notes do not need to be marked.  
US 22 2.13.4 ¶ ¶ 3   The code does not have the effect predicted by its accompanying narrative.   Append a backslash to the first line of the code.   editor    ACCEPTED  
JP 5 2.13.4 ¶ 11th para, Table 7   It is not explicit how to combine raw-string and non-raw-string.   Add rules containing raw-string in the table 7.   CWG  790  ACCEPTED  
FR 13 2.13.4 [lex.string] ¶ 3   Shouldn't the assert be
  assert(std::strcmp(p, "a\nb\nc") == 0);
 
  editor    ACCEPTED with MODIFICATIONS

The assert is correct but the preceding raw string is wrong. See JP 4.  
UK 17
[141]
2.13.4 ¶ 10   It would be preferred for attempts to modify string literals to be diagnosable errors. This is not possible due to the deprecated implicit conversion to pointer to null-terminated character sequence of non-const characters. If this deprecated conversion were remove (see other comments) then string literals are always accessed through const types, and the compiler can enforce the no modification rule. The only exception would be using const_cast to cast away constness, but this is already covered under the const_cast rules so needs no further detail here.   (asssuming deprecated conversion to non-const array is removed or can be turned off) Strike the sentence on undefined behaviour.   CWG    REJECTED

The specification covers all attempts to modify the contents of a string literal, including via a pointer to the string when it is not apparent that a string literal is the target. This is consistent with the general treatment of const objects.  
UK 18
[142]
2.13.4   The addition of static_assert (7p4) to the language raises the need to concatenate string representations of integral constant expressions (typically from a sizeof or alignof expression) with narrow string literals to provide an informative error message. There is no need to support arbitrary constant expressions and especially not floating point values or formatting flags. Likewise, the need is purely to support static_assert so only narrow string literal support is required, although generalizing to other literal types would be useful.   Define a syntax to support string-ization of integral constant expressions in a form eligible for string literal concatenation, 2.13.4p6. Suggested syntax: I" integral-constant-expression ". There is no raw variant, although it could combine with type specifier in the same way that the R prefix does, supporting u8I, uI, UI and LI.   CWG    REJECTED

There was no consensus to adopt this new functionality at this point in the standardization process.  
UK 19
[143]
2.13.4   The grammar for string literal is becoming unwieldy and could easily be refactored into the type optional specifier and the string contents.   Refactor string-literal grammar as: (note - current Drupal view loses formatting which is vital to clearly read the grammar) string-literal: string-literal-type-specifierOPT string-literal-body string-literal-type-specifier: one of u8 u U L string-literal-body: " s-char-sequenceOPT " R raw-string   CWG    ACCEPTED

The resolution for core language issue 790 effectively implements the suggested change.  
FR 14 3 [basic] ¶ 7   "In general it is necessary to determine whether a name denotes one of these entities before parsing the program that contains it."   Would prefer

"... before continuing to parse the program that contains it."

or even

"... to complete the parsing of the program that contains it."

as some names denotes entities declared after the first occurrence.  
editor    ACCEPTED  
FR 15 3 [basic] ¶ 8   /operator-function-id/, /conversion-function-id/, /template-id/ are followed by a space and then a "s" while usually such production names aren't followed by a space when put in plural (see /identifier/).     editor    ACCEPTED  
UK 20
[209]
3   Chapter 3 ("Basic concepts") provides common definitions used in the rest of the document. Now that we have concepts as a primary feature, the title of this chapter can be confusing as it does not refer to the language feature but to definitions used in the document.   Change the title to "Basic definitions".   editor    ACCEPTED with MODIFICATIONS  
UK 21
[359]
3 ¶ 2   Concepts is now the name of a specific feature of the language, the term now risks confusion and ambiguity when used in the more general sense.   Rename the chapter Basic ???. THe note in p2 specifically needs similar rewording   editor    ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 22
[362]
3 ¶ 6   References are frequently considered variables, but this definition only applies to objects.   Add "or reference" after both uses of "object"   CWG  633  ACCEPTED

See paper N2993 
UK 23
[277]
3.1 ¶ 2   alias-declarations are not definitions and should be added to the list   Add alias-declaration after typedef declaration.   CWG  758  REJECTED

An issue has been opened for consideration in a future revision of the Standard.  
UK 24
[360]
3.1 ¶ 2   The current words suggest the declaration of a static integral constant data member of a class cannot be a definition. Trying to fix this wording in-place will be verbose and risk raising more confusion than it solves, so suggest a footnote to call out the special case   Add a footnote attached to the static data membmer rule: *static data member delcarations of intergral type may also be definitions if a constant integral expression is provided for an initializer.   CWG    REJECTED

The in-class declaration of such a static data member is, in fact, not a definition; an out-of-class definition must be provided if the member is "used" as described in 3.2.  
UK 25
[361]
3.1 ¶ 3   Example is misleading as implicitly defined default constructor uses default initialization, not value initialization, for non-static data members. In the case of std::String this makes no difference, but it makes a big difference for fundamental types and pointers.   Remove the : s() from the illustrated default constructor: struct C { std::string s; C() { } C(const C& x): s(x.s) { } C& operator=(const C& x) { s = x.s; return *this; } ~C() { } };   CWG    ACCEPTED

See paper N2841 
UK 26
[363]
3.2 ¶ 1   THe one definition rule should cover references, and unless the term 'variable' is extended to cover references the list in this paragraph is incomplete.   Either include references in the definition of 'variable' (see earlier comment) or add reference to the list in this paragraph.   CWG  570  ACCEPTED

See paper N2993 
UK 27
[364]
3.2 ¶ 4   A class type must be complete when catching exceptions, even by reference or pointer. See 15.3.   Add "when used in an exception-handler (15.3)" to the list.   CWG    ACCEPTED

See paper N2841 
FR 16 3.3 [Declarative regions and scopes.]   The scope of function parameters is defined, but what is the scope of template parameters?     CWG  481  ACCEPTED  
UK 28
[365]
3.3.1 ¶ 3   Class templates are not classes, so we should include this case.   ammend "class" to "class or class template"   CWG    ACCEPTED

See paper N2841 
UK 29
[366]
3.3.10 ¶ 3   operators and conversion functions do not have names, yet are susceptible to 'name hiding' within a class - indeed we rely on this for the implicitly declared copy-assignment operator.   Add the additional phrase "The declaration of an operator or conversion function in a derived class (Clause 10) hides the declaration of an operator or conversion function of a base class of the same operator or type;"   CWG    REJECTED

These entities do, in fact, have names, as described in 3¶4.  
FR 17 3.5 [Program and linkage]   This section does not specify whether concept names have linkage. Do they or not? If concept names do not have linkage, then a note is appropriate, and that would be a bit surprising and curious. What is the rationale?     CWG  791  ACCEPTED with MODIFICATIONS

All concepts-related features have been removed from the draft.  
UK 30
[367]
3.5 ¶ 2   This paragraph implies concepts have no linkage (do they need it?) and that the entities behind names without linkage cannot be used in other scopes. This maybe a bigger problem for concept maps?   Add a note to clarify that concepts don't need linkage.   CWG  791  ACCEPTED with MODIFICATIONS

All concepts-related features have been removed from the draft.  
UK 31
[368]
3.5 ¶ 4   What is the linkage of names declared inside a namespace, in turn declared inside an anonymous namespace? It is not clear why such a namespace has no linkage, and there is no language suggesting its memmbers should lose linkage with it, which we assume is the intended consequence.   Clarify rules for namespaces inside nested namespaces, or remove the restriction.   CWG    ACCEPTED

See paper N2841 
US 23 3.5 ¶ 6   Bad paragraph break.     editor    ACCEPTED  
FR 18 3.5 [basic.link] ¶ 6   The paragraph number is not aligned with the text.     editor    ACCEPTED  
FR 19 3.6 [Start and termination]   This section completely ignores the real world and practical case of dynamically linked or loaded libraries. In current computing environments, they are ubiquitous and they cannot be ignored in practical C++ programs. The Standard should address this aspect.     CWG    REJECTED

The Committee explicitly voted that this issue could not be addressed within the time frame for this revision of the Standard.  
UK 32
[369]
3.6.1 ¶ 3   Do we really want to allow: constexpr int main() { return 0; } as a valid program?   Add constexpr to the list of ill-formed things to annotate main   CWG    ACCEPTED

See paper N2841 
US 24 3.6.1 ¶ 4   std::quick_exit is not referenced.   Reference std::quick_exit as well as std::exit in saying that automatic objects are not destroyed. It should not do so in saying that calling std::quick_exit is undefined from within destructors for static or thread duration objects.   CWG  792  ACCEPTED  
US 25 3.6.3 ¶ ¶ 2 last sent.   The parenthesized phrase, introduced via “i.e.” is in the nature of an example.   Change “i.e.” to “e.g.”   editor    REJECTED

The parenthesized phrase is in the nature of a clarification, so "i.e." is appropriate.  
JP 6 3.7.4.1 ¶ 4th para, 4th line   Typo.

Lack of a comma right after “(3.7.2)” in the sentence while there are commas after any other recitations like “(3.7.1)”. It is just a unification matter.

[ Note: in particular, a global allocation function is not called to allocate storage for objects with static storage duration (3.7.1), for objects or references with thread storage duration (3.7.2) for objects of type std::type_info (5.2.8), or for the copy of an object thrown by a throw expression (15.1). -end note ]

should be

[ Note: in particular, a global allocation function is not called to allocate storage for objects with static storage duration (3.7.1), for objects or references with thread storage duration (3.7.2), for objects of type std::type_info (5.2.8), or for the copy of an object thrown by a throw expression (15.1). -end note ]  
Correct typo.   editor    ACCEPTED  
DE 3 3.7.4.3   DE-3 It is unclear whether the following code has well-defined behavior; none of the bullets in the second paragraph seem to apply.

int& i = *new int(5);

delete &i;  
Clarify that &i is considered a safely-derived pointer value.   CWG  735  ACCEPTED  
US 26 3.8 ¶ 1 and 5   Use of object fields during destruction is excessively and erroneously constrained.   See the attached document "Issues with the C++ Standard" under Chapter 3 "Use of objects, especially from other threads, during destruction".   CWG  793  ACCEPTED  
US 27 3.9 ¶ ¶ 9 first sent.   There is a superfluous/extraneous “and”.   Delete “and” from the phrase “and std::nullptr_t”.   editor    ACCEPTED  
FR 20 3.9 [Types]   The phrase 'effective type' is defined and used in a way that is incompatible with C99. Such a deliberate incompatible choice of terminology is both unfortunate and confusing, given past practice of the committee to maintain greater compatibility with C99. We strongly suggest that the phrase 'effective type' not be used in such an incompatible way.     CWG    REJECTED

The choice of the term was previously discussed and no better term could be found.  
JP 7 3.9.2 ¶ 3rd para, 13th line   over-aligned type was added as new notion. So it is preferable to add the link after that.   Add (3.11) after over-aligned type as the link.

[ Note: pointers to over-aligned types(3.11) have no special representation, but their range of valid values is restricted by the extended alignment requirement. This International Standard specifies only two ways of obtaining such a pointer: taking the address of a valid object with an over-aligned type(3.11), and using one of the runtime pointer alignment functions. An implementation may provide other means of obtaining a valid pointer value for an over-aligned type(3.11).—end note ]  
editor    ACCEPTED  
US 28 3.9.3 ¶ ¶ 5 first sent.   The closing braces of the first two sets are preceded by extraneous space.   Delete the extra spaces.   editor    ACCEPTED  
DE 4 4.2 ¶ p2   DE-4 The deprecated conversion from string literals to pointer to non-const character types should be limited to those conversions and types of string literals that were already present in ISO/IEC 14882:2003, or the deprecated conversions should be removed entirely.   Consider applying the proposed resolution presented in core issue 693 in WG21 document N2714 “C++ Standard Core Language Active Issues, Revision 58“, available at http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2714.html ; or remove only the conversions to "pointer to char16_t", "pointer to char32_t" in 4.2 paragraph 2 and 15.1 paragraph 3.   CWG  693  ACCEPTED  
CH 1 4.9 and 5.2.9   With respect to the target type, pointer to members should behave like normal pointers (least surprise principle).   The standard should allow implicit conversions from ``pointer to member of T of type cv D'' to ``pointer to member of T of type cv B'', where D is of class type and B is a public base of D, It should allow explicit conversion the other way around.   CWG  794  REJECTED

Section reference should be 4.11 instead of 4.9. There was no consensus to make this change at this point in the standardization process.  
DE 5 4.11, 5.3.1, 5.5   DE-5 Ref-qualification has not been integrated with pointer-to-members.   Review implicit conversions (4.11), forming pointer-to-members (5.3.1), and dereferencing pointer-to-members (5.5) for type-safety concerns in the presence of ref-qualifiers on the member.   CWG  731  ACCEPTED  
UK 33
[374]
4.13 ¶ 1   We have: "No two signed integer types shall have the same rank ..." "the rank of char shall equal the rank of signed char" Can we therefore deduce that char may not be signed?   Replace the first sentence with "No two signed integer types shall have the same rank, even if they have the same representation, except that signed char shall have the same rank as char even if char is signed (3.9.1/1)."   CWG    ACCEPTED

See paper N2841 
UK 34
[375]
4.13 ¶ 1   6th bullet, "the rank of char" - first letter should be capitalised for consistency with the other bullets   The rank of char   editor    ACCEPTED  
UK 36
[407]
5.1 ¶ 1   Primary expressions are literals, names, names qualified by the scope resolution operator ::, and lambda expressions. The immediately following grammar flatly contradicts this - this and (e) are also lambda expressions.   Delete this paragraph.   CWG    ACCEPTED

The introductory sentence was deleted, but the paragraph (containing the grammar) remains.

See paper N2841 
UK 37
[224]
5.1 ¶ 11   Member function templates are not member functions, so should also be listed in the 3rd bullet   Add member function templates to the 3rd bullet   CWG    REJECTED

The text is clear enough as it is. There are many places in the Standard where function templates are not explicitly mentioned in a reference to functions.  
UK 38
[230]
5.1 ¶ 3   this might be useful in a few more places than it is permitted, specifically in decltype expressions within a class. Two examples that would be ill-formed at class scope without changes: typedef decltype( *this ) this_type; decltype( [this]{ return this->memfun(); } ) my_lambda;   ... words to follow ...   CWG    REJECTED

There was no consensus for this change.  
JP 8 5.1 ¶ 7th para, Syntax rules   In the current syntax definition, a scope operator(::) cannot be applied to decltype, but it should be. It would be useful in the case to obtain member type(nested-type) from an instance as follows:

vector<int> v;

decltype(v)::value_type i = 0; // int i = 0;  
Add “decltype ( expression ) :: “ to nested-name-specifier syntax like below.

nested-name-specifier:
type-name ::
namespace-name ::
nested-name-specifier identifier ::
nested-name-specifier templateopt simple-template-id ::
nested-name-specifieropt concept-id ::
decltype ( expression ) ::  
CWG  743  ACCEPTED

See paper N3049 
JP 9 5.1.1   It would be preferable that “&&” could be specified in a lambda expression to declare move capture.

Here is an example from N2709.

template<typename F>
std::unique_future<typename std::result_of<F()>::type> spawn_task(F f){
typedef typename std::result_of<F()>::type result_type;

struct local_task {
std::promise<result_type> promise;
F func;
local_task(local_task const& other)=delete;
local_task(F func_):
func(func_)
{}

local_task(local_task&& other):
promise(std::move(other.promise)),
f(std::move(other.f))
{}

void operator() {
try
{
promise.set_value(f());
}
catch(...)
{
promise.set_exception(std::current_exception());
}
}
};

local_task task(std::move(f));

std::unique_future<result_type> res(task.promise.get_future());
std::thread(std::move(task));
return res;
}

This can be rewritten simply as follows if move capture can be used in a lambda expression.

template<typename F>
std::unique_future<typename std::result_of<F()>::type> spawn_task(F f){
typedef typename std::result_of<F()>::type result_type;

std::promise<result_type> promise;
std::unique_future<result_type> res(promise.get_future());
std::thread([&&promise, &&f]() {
try
{
promise.set_value(f());
}
catch(...)
{
promise.set_exception(std::current_exception());
}
});
return res;
}
 
Add move capture in a lambda expression.   CWG    REJECTED

This would be a dangerous feature, allowing “moving” from named variables. It would also contradict the change made by paper N2844, prohibiting the binding of rvalue references to lvalues, which was adopted at the March, 2009 meeting.  
JP 10 5.1.1   In the current syntax definition, a returned type of a function object cannot be obtained by using result_of from an unnamed function object generated by a lambda expression because it doesn’t have result type.

template <class F>
void foo(F f)
{
typedef std::result_of<F()>::type result; // error
}
foo([]{});

If “Callable” or “Predicate” concept is specified, a returned type can be obtained from a function object without result_type. But it is preferable to be able to obtain it with template.  
Add result_type to the syntax of an unnamed function object generated by a lambda expression.   CWG    REJECTED

This is not a defect. The definition of std::result_of now uses decltype and does not require a result_type member typedef, so the desired functionality is already present in the current specification.  
US 29 5.1.1   The standard does not state whether or not direct recursion of lambdas is possible.     CWG  762  ACCEPTED

See paper N2927 
US 30 5.1.1   The standard does not clarify the meaning of this in lambdas. Does it mean this lambda, or this class within which the lambda is nested?     CWG  762  ACCEPTED

See paper N2927 
US 31 5.1.1   The current wording does not specify how context capturing and name resolution take place when the inner lambda refers to the outer lambda's locals variables and parameters.     CWG  752  ACCEPTED

See paper N2927 
UK 45
[444]
5.1.1 ¶ para 2   Lambda is a language feature with an apparent dependency on <functional>. This increases dependency of language on library, and is inconsistent with the definition of freestanding in 17.6.2.4.   Change the text "a closure object behaves as a function object" to "a closure object is a built-in object which behaves as a function object"; and after "context.", insert " A closure object may be used without any need for <functional>." This makes clear what may already be implied, namely that lambdas can be used in freestanding implementations and don't increase dependency of language on library. (Marked as technical comment anyway because this clarity is technically important).   CWG  795  REJECTED

The reference to 20.7 appears only in a note, not in normative text, and is intended only to clarify the meaning of the term “function object,” as defined there: “Function objects are objects with an operator() defined.” This creates no dependency on <functional> or any other library facitlity.  
US 32 5.1.1 ¶ 3   The final italic "this" in the paragraph should be a teletype "this".     editor    ACCEPTED  
UK 39
[408]
5.1.1 ¶ 11   This paragraph lists all the special member functions for the class representing a lambda. But it omits the destructor, which is awkward.   Add "F has an implicitly-declared destructor".   CWG  759  ACCEPTED

See paper N2927 
UK 40
[409]
5.1.1 ¶ 12   If one or more names in the effective capture set are preceded by &, the effect of invoking a closure object or a copy after the innermost block scope of the context of the lambda expression has been exited is undefined. That is too restrictive. The behaviour should be undefined iff the lifetime of any of the variables referenced has ended. This should be safe and legal; currently it has undefined behaviour: int i; reference_closure<void ()> f; if (blah) { f = [&i]() { }; } if (f) f();   If one or more names in the effective capture set are preceded by &, the effect of invoking a closure object or a copy after the lifetime of any of the variables referenced has ended is undefined.   CWG  796  ACCEPTED

Paragraph reference should be 13, not 12.

See paper N2927 
UK 41
[225]
5.1.1 ¶ 12   For argument dependant lookup (3.4.2) the associated namespaces for a class include its bases, and associated namespaces of its bases. Requiring the result of a lambda expression *to dervide from* std::reference_closure means that ADL will look in namespace std when the lambda capture is entirely by reference, which might have surprising results. Also, relying on the idea of implicitly slicing objects is uncomfortable.   Replace inheritance with implicit conversion.   CWG    ACCEPTED with MODIFICATIONS

std::reference_closure was removed at the March, 2009 meeting, rendering the issue moot.

See paper N2845 
UK 42
[226]
5.1.1   A lambda with an empty capture list has identical semantics to a regular function type. By requiring this mapping we get an efficient lambda type with a known API that is also compatible with existing operating system and C library functions.   Add a new paragraph: "A lambda expression with an empty capture set shall be convertible to pointer to function type R(P), where R is the return type and P is the parameter-type-list of the lambda expression." Additionally it might be good to (a) allow conversion to function reference (b) allow extern "C" function pointer types   CWG  797  ACCEPTED

See paper N3052 
UK 43
[231]
5.1.1 ¶ 12   The note spells out the intent that objects from lambda-expressions with an effective capture list of references should be implemented as a pair of pointers. However, nothing in the rest of 5.1.1 lifts the requirement of to declare a reference member for each captured name, and a non-normative note is not enough to relax that.   ... provvide exceptions in the right places ...   CWG    ACCEPTED with MODIFICATIONS

std::reference_closure was removed at the March, 2009 meeting, rendering the issue moot.

See paper N2845 
UK 44
[252]
5.1.1 ¶ 12   There is a strong similarity between a [&]{} lambda capturing a stack frame, and a [this]{} lambda binding a member function to a class instance. The reference_closure requirement should be extended to the second case, although we need some syntax to create such an object that is distinct from the existing pointer-to-member syntax. This would be a cleaner alternative to the new std::mem_fn library component.   Extend reference_closure requirement to cover [this] lambdas. Consider a simple syntax for creating such bound expressions.   CWG    REJECTED

There was no consensus to make the suggested change at this point in the standardization process. Furthermore, std::reference_closure was removed at the March, 2009 meeting, rendering the issue moot.  
UK 46
[449]
5.1.1 ¶ para 12   The requirement that a lambda meeting appropriate conditions be an object derived from reference_closure makes lambda the language feature dependent on <functional>, which increases dependency of the language on the library and bloats the definition of freestanding C++.   Replace text "is publicly derived from" with "shall be implemented in a manner indistinguishable from". This places an ABI constraint on reference closures such that compiler and library implementer have to do compatible things. But it cuts the dependency of lambda syntax on <functional>.   CWG    ACCEPTED with MODIFICATIONS

std::reference_closure was removed at the March, 2009 meeting, rendering the issue moot.

See paper N2845 
DE 6 5.1.1, 20.7.18   DE-6 Some uses of lambda expressions refer to specializations of the unconstrained class template std::reference_closure (5.1.1). If the lambda expression appears in a constrained context and the return type or a parameter type for the lambda depend on a template parameter (see 14.10), such a use is ill-formed.   In 20.7.18, for the class template std::reference_closure, require Returnable for R and VariableType for each of the ArgTypes.   CWG    ACCEPTED with MODIFICATIONS

std::reference_closure was removed at the March, 2009 meeting, rendering the issue moot.

See paper N2845 
DE 7 5.1.1 ¶ p10   DE-7 The note at the end of paragraph 10 appears to be garbled.   Remove "or references" in the note.   editor    REJECTED

Looks okay: "captured" applies to "variables or references".  
DE 8 5.1.1 ¶ p10   DE-8 The construction of the function call operator signature is missing specifications for the ref-qualifier and the attribute-specifier.   Add bullets that say that the ref-qualifier and the attribute-specifier are absent.   CWG    ACCEPTED

See paper N2841 
US 33 5.1.1 ¶ 11   There is no definition of “move constructor” or “move operation”   Since this is the first place the terms are used, a definition should either be added here, or a cross reference to one.   CWG  680  ACCEPTED with MODIFICATIONS

The term “move constructor” is no longer used; instead, the behavior of the constructor is described.

See paper N2927 
DE 9 5.1.1   DE-9 There is not a single example of a lambda-expression in the standard. See also core issue 720 in WG21 document N2791 "C++ Standard Core Language Active Issues, Revision 59", available at http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2791.html .   Add a few well-chosen examples.   CWG  720  ACCEPTED

See paper N2927 
UK 52
[232]
5.2 ¶ 3   This paragraph seens out of place, assignment expressions are covered in 5.17   Move p3 to subsection 5.17   editor    ACCEPTED with MODIFICATIONS

Removed the paragraph; grammar changes make it moot.  
UK 53
[233]
5.2.1   The definition in p1 makes no allowance for overloaded operator[] that treats the expression as a simple function call, and does not support the interchangability of arguments. Howver p2 relies on this definition when describing the use of brace-init-lists inside [].   Insert a new p2 describing the changed semantics for overloaded operator[]. This should be a note to avoid introducing normative text that could potentially conflict with the later definiton of these semantics.   CWG  798  REJECTED

An issue has been opened for consideration in a future revision of the Standard.  
UK 59
[410]
5.2.2 ¶ 7   When there is no parameter for a given argument, the argument is passed in such a way that the receiving function can obtain the value of the argument by invoking va_arg. That shouldn't apply to parameter packs. template <class ... Types> void f(Types ... pack); f(1, 2, 3);   Clarify that this sentence only applies where the ellipsis is used.   CWG    ACCEPTED

See paper N2841 
UK 60
[411]
5.2.5 ¶ 3   In the remainder of 5.2.5, cq represents either const or the absence of const vq represents either volatile or the absence of volatile.   Add "and" before vq   editor    ACCEPTED  
UK 61
[234]
5.2.5 ¶ p1   Together with footnote 60 there may be confusion that the postfix expression is always evaluated - even when part of an unevaluated operand. We believe the standard does not require this, and a comment in the existing note would be a useful clarification.   Clarify in footnote 60 that this will not happen if the whole expression is an unevaluated operand.   editor    ACCEPTED  
UK 62
[235]
5.2.5 ¶ 4   In the final bullet, what does 'not an lvalue' mean? Does it imply rvalue, or are there other possible meanings? Should clauses that trigger on rvalues pick up on this?   Replace 'not an lvalue' with 'is an rvalue'.   CWG    ACCEPTED

See paper N2841 
DE 10 5.2.5   DE-10 If E1.E2 is referring to a non-static member function, the potential ref-qualification on E2 should be taken into account.   Adjust the presentation of the types involved as appropriate.   CWG  731  ACCEPTED  
UK 63
[412]
5.2.6 ¶ 2   Paragraph 2 is missing its number.   Add one.   editor    ACCEPTED  
UK 64
[413]
5.2.7 ¶ 3   A new name R is introduced for use in paragraphs 3 and 4. But R is the same as T.   Replace R with T and replace "the required result type (which, for convenience, will be called R in this description)" with "T".   editor    ACCEPTED  
UK 65
[414]
5.2.7 ¶ 8   In the first two bullets we have "the result is a pointer (an lvalue referring) to". But para 2 makes clear that a dynamic_cast of an rvalue references produces a rvalue. (Can an lvalue refer to anything anyway?)   Replace "an lvalue referring to" with "reference", twice.   CWG    ACCEPTED with MODIFICATIONS

See paper N2841 
UK 66
[415]
5.2.8 ¶ 1   typeid may return "an implementation-defined class derived from std :: type_info". The derivation must be public.   an implementation-defined class publicly derived from std :: type_info   CWG    ACCEPTED

See paper N2841 
UK 67
[416]
5.2.9 ¶ 1, 2, 3   Paragraph 1 specifies when the result of static_cast is an lvalue; repeating it is unnecessary.   In para 2, delete "It is an lvalue if the type cast to is an lvalue reference; otherwise, it is an rvalue." and "The result is an rvalue.". In para 3, delete "The result is an lvalue if T is an lvalue reference type (8.3.2), and an rvalue otherwise."   CWG    ACCEPTED

The sentence in question is 20.1.1/5.

See paper N2841 
UK 54
[417]
5.2.10 ¶ 3, 6   Para 3: "The mapping performed by reinterpret_cast is implementation-defined.". Para 6: "... the result of such a pointer conversion is unspecified." Which is it?   In para 6, replace unspecified with implementation-defined. Alternatively, delete paragraph 3, since individual cases are labelled appropriately.   CWG    ACCEPTED

See paper N2841 
UK 55
[236]
5.2.10 ¶ 2   dynamic_cast and reinterpret_cast crossreference 5.2.11 without creating an extra note. The second half of the note is unrelated to the crossrefernce, and would serve as well in normative text.   Strike the note about definition of casting away constness, preserve the cross-reference. The second sentance on reintrepret_cast to its own type should move out of the note into the normative text.   CWG  799  ACCEPTED

The repetition of the reference to 5.2.11 was handled as a quasi-editorial change in paper N2841. Issue 799 was opened for the question about casting to the same type as the operand.

See paper N2841 
UK 56
[237]
5.2.10 ¶ 5   The notion of safely derived pointers means this conversion may not be as safe in the revised standard as the original. It would be good to call attention to the changed semantics with a note.   Add: [Note: the result of such a conversion will not be a safely-derived pointer value (3.7.4.3) -- end note]   CWG    ACCEPTED with MODIFICATIONS

See paper N2841 
UK 57
[238]
5.2.10 ¶ 8   Conditionally supported behaviour gives a wide range or permission, so clarify relationship between safely-derived object pointers and function pointers in a note.   Add: [Note: In such cases, the implementation shall also define whether a safely-derived object pointer cast to a function pointer can be safely cast back -- end note]   CWG  800  REJECTED

The definition of "safely-derived pointer" is exclusively formulated in terms of pointers to dynamically-allocated objects. The conversion between function pointers and object pointers is principally intended for use with dynamic loading of shared libraries, which has minimal interaction with garbage-collected objects. There was no perceived need for the Standard to say anything further on this topic.  
UK 58
[418]
5.2.11 ¶ 9   Casting from an lvalue of type T1 to an lvalue of type T2 using a reference cast casts away constness if a cast from an rvalue of type “pointer to T1” to the type “pointer to T2” casts away constness. That doesn't cover rvalue references.   Replace lvalue with "lvalue or rvalue" twice.   CWG  801  ACCEPTED  
US 34 5.3 ¶ 1   The list of unary operator should be in teletype font.     editor    ACCEPTED  
UK 68
[419]
5.3.1 ¶ 2-9   All the unary operands other than * return rvalues - but this is not stated.   Add a paragraph 1a "The following unary operators all produce results that are rvalues."   CWG    ACCEPTED

See paper N2841 
UK 69
[240]
5.3.1 ¶ 2   If we cannot bind references/take address of functions in concept_maps, does that mean we cannot use generic bind in constrained templates? Launch threads with expressions found via concept map lookup? Hit problems creating std::function objects? Does the problem only occur if we use qualified lookup to explicitly name a concept map? Does it only kick in if we rely on the implicit function implementation provided by a concept_map, so some types will work and others won't for the same algorithm?!   ... unknown ...   CWG  802  ACCEPTED with MODIFICATIONS

All concepts-related features have been removed from the draft.  
UK 70
[420]
5.3.3 ¶ 1   The sizeof operator shall not be applied to ... an enumeration type before all its enumerators have been declared We should allow enum E : int; sizeof(E).   Change "an enumeration type" to "an enumeration type whose underlying type is not fixed".   CWG  803  ACCEPTED  
UK 71
[254]
5.3.4 ¶ 2   The type of an allocated object wih the type specifier auto is determined by the rules of copy initialization, but the initialization applied will be direct initialization. This would affect classes which declare their copy constructor explicit, for instance. For consistency, use the same form of initiailization for the deduction as the new expression.   Replace T x = e; with T x(e);   CWG  804  ACCEPTED  
UK 72
[257]
5.3.4 ¶ 7   The library headers have been carefully structured to limit the dependencies between core language and specific headers. The exception thrown should be catchable by a handler for a type lised in <exception> header in cluase 18. This might be accomplished by moving length_error into the <exception> header, but its dependency on logic_error with its std::string constructors suggest this is not a good idea. Prefer to pick an existing exception instead.   Throw std::bad_alloc instead of std::length_error.   CWG  805  ACCEPTED

See paper N2932 
UK 73
[258]
5.3.4 ¶ 6   A class type with conversion operator can only be used if the conversion type is constexpr and the class is a literal type. Adding the single word 'literal' before class type will clarify this.   Add 'literal' before 'class type'   CWG    REJECTED

This is not a defect. The leftmost subscript in the noptr-new-declarator (the expression, as opposed to the constant-expression) need not be constant.  
UK 74
[259]
5.3.4 ¶ 8   operators, like constructors and destructors, do not have names. However, in certain circumstances they can be treated as if they had a name, but usually the stanadard is very clear not to actually describe their name as a distinct property.   Change "the allocation function’s name is operator new" to "the allocation function is named operator new" and similarly for operator delete.   CWG    REJECTED

The premise is incorrect: according to 3 [basic] paragraph 4, operators do indeed have names.  
UK 35
[260]
5.3.4 ¶ 9   Missing period in middle of paragraph between "in the scope of T" and "If this lookup fails"   Add a period between "in the scope of T" and "If this lookup fails"   editor    ACCEPTED  
UK 75
[262]
5.3.5 ¶ 8   A paragraph strarting with [Note... is easily skipped when reading, missing the normative text at the end.   Swap order of the note and normative text.   editor    ACCEPTED  
FR 21 5.3.6 [Alignof   Should not the type of alignof-expression be of type std::max_align_t?     CWG    REJECTED

std::max_align_t is not guaranteed to be integral, only a POD. std::size_t is the correct choice.  
US 35 5.8 ¶ 2 and 3   There is curious spacing in the expressions "E1 <<E2" and "E1 >>E2". This is a formatting change since previous versions of the Standard.     editor    ACCEPTED  
UK 47
[242]
5.14 / 5.15 ¶ 2   Why are the descriptions of order of evaluation of expressions and side effects different between && and || operators. The interaction with the memory model should be identical, so identical words should be used to avoid accidential inconsistencies in interpretation.   Pick one form of wording as 'the best' and apply it in both places.   CWG    ACCEPTED

See paper N2841 
UK 48
[249]
5.18 ¶ 1   The defining feature of the comma operator is the guaranteed sequencing of two expressions. This guarantee is lost when presented with an overloaded operator, and this change is subtle enough to call attention to it.   Add: [Note: There are no guarantees on the order of value computation for an overloaded comma operator -- end note]   editor    ACCEPTED  
UK 49
[376]
5.19 ¶ 2   Is an implementation permitted to reject this? constexpr int f() { return f(); } int a[f()]; AFAICT it is well-formed; f() seems to satisfy all the rules to make it a constant expression. I would hate compilation to become a potentially non-terminating experience.   Add an escape clause to allow the implementation to reject excessively deep nesting of constexpr function evaluations. (This can possibly be a note, since it is arguable that this point is handled by the general rule on resource limits in 1.4/2. A sufficiently smart compiler could use tail recursion above, meaning that it would never run out of memory given this program though.)   CWG  699  ACCEPTED  
UK 50
[378]
5.19 ¶ 2   The following should be valid: enum E { foo = 4}; const E c = foo; int a[c]; But currently it is not - c is not an lvalue of effective integral type (4th bullet). (See also 7.1.6.1/2)   Change "effective integral type" to "effective integral or enumeration type" in the 4th bullet, 1st sub-bullet.   CWG  806  ACCEPTED  
UK 51
[251]
5.19 ¶ 2   typeid expressions can never be constant, whether or not the operand is a polymorphic class type. The result of the expression is a reference, and the typeinfo class that the reference refers to is polymorphic, with a virtual destructor - it can never be a literal type.   Strike the words "whose operand is of a polymorphic class type" on the bullet for typeid expressions.   CWG  807  REJECTED

The result of typeid applied to a non-polymorphic type can be treated as an address constant and thus usable for static initialization (e.g., to initialize a reference). The result of typeid applied to an lvalue of polymorphic type cannot be known at compile time. The polymorphic nature of the typeinfo class is irrelevant to this usage and distinction.  
UK 76
[131]
6.3   Do we really need two different terms that say the same thing?   Pick either 'block' or 'compound statement' as the preferred term and use it consistently throughout the standard.   CWG    REJECTED

Both terms are in common use, and there was no consensus for removing one of them.  
FR 22 6.4.2 [The switch statement]   The constant-expression in

case constant-expression

should be allowed to be of any constant expression of literal type for which a constexpr comparison operator (operator< and operator==) is in scope. Now that constant expressions of other integral types are evaluated at compile time, the restriction for case-labels is at best artificial.  
  CWG    REJECTED

There was no consensus for making this change at this point in the standardization process.  
UK 77
[132]
6.5 ¶ 5   The terms i/o operation, synchronize operation and atomic operation have very specific meanings within the standard. The paragraph would be much easier to understand with the terms crossreferenced.   Profide a cross-reference for the terms: i/o operation, synchronize operation and atomic operation   editor    ACCEPTED  
JP 11 6.5.4 ¶ 1st para, 5th line   There is no _RangeT type in the equivalent code to “range-base for” statement. It existed in N2049.   Add a typedef for _RangeT in the example as follows:

{
typedef decltype( expression ) _RangeT;
auto && __range = ( expression );
for ( auto __begin = std::Range<_RangeT>:: begin(__range),
__end = std::Range<_RangeT>:: end(__range);
__begin != __end;
++__begin )
{
for-range-declaration = *__begin;
statement
}
}  
CWG    REJECTED

The change was intentional; the term is defined in the descriptive text.  
UK 78
[130]
6.5.4 ¶ 2   Including the header <iterator_concepts> is far too unwieldy to enable an important and (expected to be) frequently used syntax.   Merge <iterator_concepts> into <concepts> and change 6.5.4p2 to refer to <concepts>, or make the Range concept fundamental along with the other support concepts in 14.9.4 and strike any reference to including a header.   LWG  1001  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.

See paper N2930 
UK 79
[445]
6.5.4   The definition of for (for-range-declaration : expression) statement is expanded in terms which require a Range concept, and the program is ill-formed if <iterator_concepts> isn't included. For users, iterating through old-fashioned arrays, this is a sledge-hammer to crack a nut and compares poorly with other languages. It's also not possible to implement this without adversely impacting the freestanding definition in 17.6.2.4.   When expression is an array a of length N whose length is known at compile time, expand range-for as 'for (... p=a, p!=a+N, p++) ...' without requiring the Range concept or <iterator_concepts>. Also, when expression is an initializer_list, expand range-for similarly without requiring <iterator_concepts>.   CWG    ACCEPTED with MODIFICATIONS

See paper N2930 
DE 11 6.9 ¶ p1   DE-11 A sentence in paragraph 1 reads: "Outside of a constrained context, the late-checked block has no effect." This, at face value, specifies that the compound-statement of such a late-checked block is never executed, which appears to be unintended.   State that such a late-checked block has the same meaning as if the late_check keyword were absent.   CWG    ACCEPTED

See paper N2841 
UK 80
[370]
7 ¶ 1   Many of the sections and major subsections open with a sentence summarising the content. I'm not sure this is necessary; this isn't a tutorial. The problem with these summaries is that because they omit much of the detail, they tend to be inaccurate. This may not matter, but I feel the document would be improved by omitting them. There's a prime example here: "Declarations specify how names are to be interpreted." Not true for static_assert, an asm declaration nor an anonymous bit field.   Strike the first sentence.   editor    ACCEPTED with MODIFICATIONS

Tweaked first sentence.  
UK 81
[371]
7 ¶ 4   String literal concatenation happens in phase 6, before parsing, so it is legal and useful to use it for the string literal in a static_assert. It would be useful to add a note mentioning this.   Add a note: Multiple adjacent string literals may be used instead of a single /string-literal/; see [lex.phases].   CWG    REJECTED

The Standard is already clear enough on this point.  
UK 82
[386]
7 ¶ 2   Paragraph 2 talks about declarations that can have nested declarations within them. It doesn't mention scoped enumerations - but according to 7.2/11, "Each scoped enumerator is declared in the scope of the enumeration."   Add "scoped enumeration" to the list in the second sentence.   CWG    REJECTED

This suggestion was already considered and rejected. In particular, the following statement (“These nested scopes, in turn, can have declarations nested within them”) is not true of an enumeration scope.  
UK 83
[372]
7.1 ¶ 2   The longest sequence of decl-specifiers that could possibly be a type name is taken as the decl-specifier-seq of a declaration. But many sequences of decl-specifiers cannot possibly be a type name - eg the sequence "friend int", or "typedef int".   Not sure. I understand the rule, just not how to say it.   CWG  808  ACCEPTED  
UK 84
[404]
7.1 ¶ 1   The grammar includes alignment-specifier as a production for decl-specifier, but there is no production for alignment-specifier. I suspect this is a holdover from before alignment was handled as an attribute.   Delete the production (including the duplicate in A6)   CWG    ACCEPTED

See paper N2841 
FI 3 7.1 ¶ [dcl. spec. auto]   While it’s considered too late for this standard revision, consider loosening the restrictions for auto specifier and making it more a mirror of a deduced template function parameter.   See restricted-auto.ppt   CWG    REJECTED

As noted, the suggestion comes too late for consideration at this point in the standardization process.  
UK 85
[373]
7.1.1 ¶ 1   ... the init-declarator-list of the declaration shall not be empty (except for global anonymous unions, which shall be declared static). Global here means "declared at namespace scope". (cf 9.5/3 "Anonymous unions declared in a named namespace or in the global namespace shall be declared static.").   Replace "global" with "namespace scope".   CWG  940  ACCEPTED  
UK 86
[403]
7.1.1 ¶ 2,3   The register keyword serves very little function, offering no more than a hint that a note says is typically ignored. It should be deprecated in this version of the standard, freeing the reserved name up for use in a future standard, much like auto has been re-used this time around for being similarly useless.   Deprecate current usage of the register keyword.   CWG  809  ACCEPTED  
UK 87
[405]
7.1.1 ¶ 1, 4, 5   Why require two keywords, where one on its own becomes ill-formed? thread_local should imply 'static' in this case, and the combination of keywords should be banned rather than required. This would also eliminate the one of two exceptions documented in 7.1.1p1.   Drop requirement to combine static keyword with thread_local at block-scope inside a function definition.   CWG  810  ACCEPTED  
US 36 7.1.1 ¶ 4   The permission to use thread_local static data members is missing.   Add the static members as a permitted use.   CWG  717  ACCEPTED  
FR 23 7.1.5 [constexpr]   'constexpr' functions should be allowed to take const reference parameters, as long as their uses are in a context where a constant expression may be required. For example, the following should be allowed

template<typename T, int N>
int size(const T(&)[N]) { return N; }

int a[] = { 41,42,43,44 };
enum { v = size(a) };  
  CWG    ACCEPTED

There was no consensus for making this change without a more complete proposal.

See paper N3078 
JP 12 7.1.5   It should be allowed to define constexpr recursively.

There is an explanation in N2235, Generalized Constant Expressions—Revision 5, as follows.

We (still) prohibit recursion in all its form in constant expressions. That is not strictly necessary because an implementation limit on recursion depth in constant expression evaluation would save us from the possibility of the compiler recursing forever. However, until we see a convincing use case for recursion, we don’t propose to allow it.

Then, here are the use cases where allowing recursion for constexpr is very useful.

Range of problem to be handled with constexpr would become extended. For example, user defined type (e.g. Complex type) could be placed in ROM area. But with current specification, a function defined with constexpr cannot be called recursively. As a side effect is not allowed in compile-time, it cannot be implemented to repeat anything without recursion. Although it could be implemented without recursion like func0, func1, func2 in an example below, it is not elegant solution.

constexpr double func0(double x) { /* ... */}
constexpr double func1(double x) { /* call for func0 */ }
constexpr double func2(double x) { /* call for func1 */ }
/* ... */

- Compile-time and runtime

As constexpr can be also evaluated both in compile-time and runtime, we need to discuss about both cases.

Runtime evaluation is just to execute it. If you eliminate constexpr keyword, it is executable as of now. Any modern compiler may optimize tail recursion easily.

Compile-time evaluation is the same thing as template recursion. It is necessary to support floating point operation, but it is already possible to calculate it in compile-time, so it’s ok.

- Sample

Here is an example to calculate a square root using constexpr recursively.

/*constexpr*/ double SqrtHelper(double x, double a, int n)
{
return n == 0 ? a : SqrtHelper(x, (x / a + a) / 2.0, n - 1);
}

/*constexpr*/ double Sqrt(double x)
{
return SqrtHelper(x, x, 20);
}

/*constexpr*/ double root2 = Sqrt(2.0); // 1.41421...  
Allow constexpr recursion.   CWG  699  ACCEPTED  
US 37 7.1.6.1 ¶ 1   There is a "Note: 3.9.3 describes how cv-qualifiers affect object and function types." So far as I can see, 3.9.3 CV-qualifiers only describes cv-qualifiers for objects, cv-qualifiers for (member) functions being described in 8.3.5 Functions.     editor    ACCEPTED  
UK 89
[377]
7.1.6.1 ¶ 2   The two normative sentences in this paragraph appear to duplicate text elsewhere - but they aren't exact duplicates, which introduces uncertainty. 1. "An object declared in namespace scope with a const-qualified type has internal linkage unless it is explicitly declared extern or unless it was previously declared to have external linkage.". This nearly repeats 7.1.1/7: "Objects declared const and not explicitly declared extern have internal linkage." The former seems to allow more wiggle room - can an object be "previously declared to have external linkage" without having been "explicitly declared extern"? 2. "A variable of non-volatile const-qualified integral or enumeration type initialized by an integral constant expression can be used in integral constant expressions (5.19)." This nearly duplicates 5.19/2, bullet 4, 1st sub-bullet - "[... an integaral constant expression can use] an lvalue of effective integral type that refers to a non-volatile const variable or static data member initialized with constant expressions". The latter does not allow for lvalues of enumeration type (neither scoped not unscoped enumerations are integral types - 3.9.1/7, and note 44). This seems to be a flaw in 5.19/2.   Make the normative text in this section into one or more notes, with cross references, and correct the referenced text if necessary.   CWG  811  ACCEPTED  
UK 90
[379]
7.1.6.2 ¶ para 1 and table 9   The grammar in paragraph one makes "nested-name-specifier template simple-template-id" a simple-type-specifier, but unlike all the others it is omitted from table 9.   Add a row to table 9 mentioning simple-template-id and punting to clause 14 (cf decltype(expression)).   editor    ACCEPTED  
UK 91
[380]
7.1.6.2 ¶ 4   5.1/5 says "[A] parenthesized expression can be used in exactly the same contexts as those where the enclosed expression can be used, and with the same meaning, except as otherwise indicated." When the first bullet point of this paragraph, describing the type denoted by decltype(e), says "if e is an id-expression ... decltype(e) is the type of the entity named by e", 5.1/5 is not excluded, which would imply that decltype((e)) was also the type of e. But the intention appears that it should be caught by the third bullet and treated as an lvalue expression, so decltype((e)) should be a reference to the type of e. Conversely, the second bullet point says "(parentheses around e are ignored)", which is redundant because of 5.1/5.   Insert "unparenthised" in the first bullet point - "if e is an *unparenthised* id-expression ...". In the second bullet point, move "(parentheses around e are ignored)" into a note.   CWG    ACCEPTED with MODIFICATIONS

See paper N2841 
UK 92
[382]
7.1.6.3 ¶ 2   The note correctly indicates that, if T is a template type parameter, then "friend class T;" is ill-formed. It might be worth pointing out at the same time that the alternative "friend T;" is now allowed - see 11.4/3.   Either strike the note or add reference to 11.4/3 and/or mention of "friend T;".   editor    ACCEPTED  
UK 93
[454]
7.1.6.3 ¶ Grammar before para 1   In the third production, "enum ::opt nested-name-specifieropt identifier", enum should not be in italics; its referring to the enum keyword.   Change to keyword font   editor    ACCEPTED  
UK 94
[383]
7.1.6.4 ¶ 1   The auto type-specifier signifies that the type of an object being declared shall be deduced from its initializer or specified explicitly at the end of a function declarator. A function declarator does not declare an object.   The auto type-specifier signifies that the type of an object being declared shall be deduced from its initializer or that the return type of a function is specified explicitly at the end of a function declarator.   editor    ACCEPTED  
UK 95
[396]
7.1.6.4 ¶ 4   (See also c++std-core-13583) This paragraph allows auto "in the type-specifier-seq in a new-type-id (5.3.4)" (and nowhere else not listed). Specifically, it isn't allowed in a type-id in a new-expression. That allows "new auto (42)", but not "new (auto)(42)". However, 5.3.4/2 suggests the latter should be allowed "If the auto type-specifier appears in the type-specifier-seq of a new-type-id or type-id of a new-expression ...". The inconsistency should be resolved, ideally in favour of allowing both forms.   Change "in a new-type-id" to "in a new-type-id or type-id in a new-expression".   CWG  746  ACCEPTED  
FR 24 7.1.6.4 [auto specifier]   Now that 'auto' is finally used in its most obvious sense to state `deduce the type of this variable from initializer', it should also be allowed in template parameter declarations, as in

template<auto n> struct X { /* … */ };

X<903> x;

X<&Widget::callback> y;

instead of the current, often verbose and cumbersome

template<typename T, T n> struct X { /* … */ };

X<int,903> x;

X<void (Widget::*)(),&Widget::callback> y;

We understand that 'auto' is used in 14.1/18 in a different way (for constrained template), but that usable appears very strange syntax, unnatural and does not fit well with the usage in this section.  
  CWG    REJECTED

There was no consensus to make this change at this point in the standardization process.  
US 38 7.2 ¶ 1   The discussion of attribute specifiers should be a separate paragraph.     editor    REJECTED

It's okay where it is. It's a list of constraints on the grammar.  
US 39 7.2 ¶ 2   The paragraph says in part "An opaque-enum-declaration declaring an unscoped enumeration shall not omit the enum-base." This statement implies that the base may be omitted for scoped enumerations, which is somewhat inconsistent with paragraph 3 and somewhat consistent with paragraph 5.   As this implication leaves no representation, it should be either affirmed here or the statement should be expanded. Perhaps a note is warranted.   CWG    REJECTED

The current specification is consistent. A scoped enumeration with an omitted enum-base has an underlying type of int.  
JP 13 7.2 ¶ para 3   In the description for an unscoped enumeration, enum-base in redeclaration must be the same underlying type as in the 1st declaration, but it is not described explicitly, while it is referred that all enum-bases in redeclarations must specify the same underlying type.   Replace the description, "same underlying type", with "same as underlying type of (previous) declaration."   editor    ACCEPTED  
UK 96
[384]
7.2 ¶ 7   enum E { }; What are the values of E? It has neither a smallest nor largest enumerator, so paragraph 7 doesn't help. (Paragraph 6 indicates that the underlying type is as if E had a single enumerator with value 0, but that does not define the values of E.)   Add a second sentence to paragraph 7 (before "Otherwise"): "If the enumerator-list is empty, 0 is the only value of the enumeration."   CWG  628  ACCEPTED  
UK 97
[385]
7.2 ¶ 9   Missing punctuation after "blue" in: "The possible values of an object of type color are red, yellow, green, blue these values can be converted ..."   Add a semicolon: "The possible values of an object of type color are red, yellow, green, blue; these values can be converted ..."   editor    ACCEPTED  
UK 98
[402]
7.2 ¶ 5   It would be useful to be able to determine the underlying type of an arbitrary enumeration type. This would allow safe casting to an integral type (especially needed for scoped enums, which do not promote), and would allow use of numeric_limits. In general it makes generic programming with enumerations easier.   Add a TransformationTrait to 20.5.6 that returns the underlying type of an enumeration type.   LWG  1055  ACCEPTED with MODIFICATIONS

Section reference should be 20.5.6 instead of 7.2. Name of trait changed to underlying_type.  
UK 99
[421]
7.2 ¶ 3   It is unclear whether an enumeration type is complete after an opaque-enum-declaration. This paragraph only says so in a note, and the general rule in 3.9/5 ("Incompletely-defined object types ... are incomplete types") is unclear in this situation.   Move "an enumeration declared by an opaque-enum-declaration ... is a complete type" from the note to normative text.   CWG    REJECTED

The definition of an incomplete type in 3.9 paragraph 5 does not mention opaque enumeration types; therefore, an opaque enumeration type is not an incomplete type.  
JP 14 7.3.1  

The description of the behavior when a member that was defined with same name in other namespace was referred.

  • It seems that the behavior of the following case is not defined. So we think that it is necessary to define that.

      namespace Q {
        inline namespace V {
          int g;
        }
        int g;
      }
      Q::g = 1; // ill-fromed,
                // Q::V::g = 1;,
                // or Q::g = 1;?
    
  • Add that the following case is ill-formed to more easily to understand.

      namespace Q {
        inline namespace V1 {
          int g;
        }
        inline namespace V2 {
          int g;
        }
      }
      Q::g = 1;  // ill-formed
    
 
Add the description of the behavior when a member that was defined with same name in other namespace was referred.   CWG  812  ACCEPTED  
UK 100
[387]
7.3.3 ¶ 10 and 13   Para 10 says "A using-declaration is a declaration and can therefore be used repeatedly where (and only where) multiple declarations are allowed." Para 13 says "Since a using-declaration is a declaration, the restrictions on declarations of the same name in the same declarative region (3.3) also apply to using-declarations." These appear to be saying exactly the same thing.   Delete para 10, moving its example into para 13.   CWG    REJECTED

The two citations are different: paragraph 10 is referring to repeated declarations of the same entity, while paragraph 13 deals with declarations of different entities with the same name.  
UK 101
[388]
7.3.3 ¶ 20   If a using-declaration uses the keyword typename and specifies a dependent name (14.6.2), the name introduced by the using-declaration is treated as a typedef-name (7.1.3). That doesn't specify at all what the effect of using typename with a non-dependent name is. Is it allowed? What about outside any template? What if the name isn't a type? (14.6/4 doesn't cover this, I think.)   Allow typename for non-dependent names iff they refer to a type.   CWG  813  REJECTED

An issue has been opened for consideration in a future revision of the Standard.  
DE 12 7.3.3 ¶ p15   DE-12 Overriding and hiding of member functions named in using-declarations should consider ref-qualifiers, because they are part of the function type.     CWG  731  ACCEPTED  
FR 25 7.3.3 [The using declaration] ¶ Para 21   The syntax for concept map alias is unnecessarily both confused and verbose.   We strongly suggest simplifications, e.g.

using N1::C<int>;

that fits well with existing constructs. The syntactic complexity is too high for a new feature presumably designed to support sound programming.  
CWG    ACCEPTED with MODIFICATIONS

All concepts-related features have been removed from the draft.  
UK 102
[389]
7.3.4 ¶ 6   This paragraph says "If name lookup finds a declaration for a name in two different namespaces, and the declarations do not declare the same entity and do not declare functions, the use of the name is ill-formed." But the example uses declaration of functions, so is not covered by this paragraph.   Move the example to paragraph 7, and/or replace it with an appropriate example.   editor    ACCEPTED with MODIFICATIONS

Changed the example slightly to make it clearer.  
US 40 7.6   The list of attributes is missing an attribute to indicate that a function with a throw() (throws nothing) clause need not have the unexpected() catch clause generated. This attribute was a motivating example for the attribute syntax, and its omission is surprising.   Add the attribute.   CWG  814  ACCEPTED with MODIFICATIONS

The noexcept keyword was added instead of an attribute.

See paper N3050 
US 41 7.6   A common problem is unintentionally declaring a new virtual member function instead of overriding a base virtual member function.   An attribute stating intent to override would enable better diagnostics.   CWG  939  ACCEPTED

See paper N2928 
FR 26 7.6[Attributes]   Are they part of object types or not? The section does not appear to indicate that clearly.     CWG    REJECTED

None of the standard attributes says that it is part of the type of an object, which would be required for it to be so. Nonstandard attributes might be, but nothing can be said normatively about such attributes.  
FI 1 7.6   Add override-attribute for functions in order to avoid mistakes when overriding functions.   See override­-attribute.doc, override-attribute.ppt   CWG  939  ACCEPTED

See paper N2928 
FR 27 7.6.1   This section specifies that no name lookup is performed on any identifier contained in an attribute-token. This in particular implies that, for example, it is impossible to define a template class parameterized by its alignment. That restriction is unacceptable.

The original alignment proposal made that useful construct possible.

Furthermore paragraph 7.6.1/2 appears contradictory with the rest of that section -- since no name lookup is performed, how a 'type-id'is determined?  
  CWG    REJECTED

The comment is based on a misunderstanding: what is not looked up is, informally, the attribute name (e.g., align), including the attribute-namespace, if any. The attribute-argument-clause, if present, can have identifiers that are looked up, depending on the attribute.  
UK 103
[397]
7.6.1   Attributes should support pack expansion. For example, this would be extremely useful with the align attribute, directly supporting the (removed) functionality of aligned_union. NOte that aligned_union was removed as varaiant-unions were considered a complete replacement - however this is not true for variadic templates. Adding this support to attributes would remove the remaining need, and support similar attributes in the future.   Add: attribute... to the grammar for attribute-list Add to list in 14.5.3p4: "In an attribute-list(7.6.1); the pattern is an attribute."   CWG  815  ACCEPTED

See paper N2933 
UK 104
[398]
7.6.1 ¶ 1   It is helpful for each subclause to contain a short paragraph introducing its intent an purpose. 7.6 has such a paragraph, but it is nested under a more specific subsection.   7.6.1p1 should move up one level to become 7.6p1. There grammar should remain under 7.6.1   editor    REJECTED

ISO editing guidelines insist that only leaf clauses have text. Moving this sentence to 7.6 would violate that rule (not that the standard doesn't violate it in many places, but we shouldn't make this worse now).  
UK 105
[448]
7.6.1 ¶ 1   Allowing only one level of namespaces in attributes seems unnecessarily limiting.   To: attribute-scoped-token: attribute-namespace :: identifier add attribute-namespace :: attribute-scoped-token   CWG    REJECTED

This suggestion was discussed earlier and rejected, and there was no consensus for reconsideration.  
UK 106
[391]
7.6.2 ¶ 1   Extensive use of alignment and related terms without cross reference.   Add cross-reference to 3.11.   editor    ACCEPTED  
JP 15 7.6.2   An abbreviation of 7.6.2 should be “[decl.attr.align]” instead of “[dcl.align]”. Section name “[dcl.align]” is not consistent with others, because others in 7.6 are the form of “dcl.attr.*”. In N2761, the section name of 7.1.7 had been changed from “[dcl.align]” to “[dcl.attr.align]”, but in N2800 it was reverted to “[dcl.align]” along with a change of section number, 7.1.7 to 7.6.2.   Change "[dcl.align]" of 7.6.2 to "[decl.attr.align]".   editor    REJECTED

Tags don't change. This section used to be somewhere else, and the tag was appropriate there.  
UK 107
[399]
7.6.3   While undefined behaviour might be the best we can guarantee, it would be helpful to encourage implementations to diagnose function definitions that might execute a return.   Adda a [Note : implementations are encouraged to issue a diagnostic where the definition of a function marked [[noreturn]] might execute a return statement -- end note]   editor    ACCEPTED  
UK 108
[401]
7.6.4 ¶ 2   It is unclear why no diagnostic is required for an easily detectable violation. It is even more surprising that the associated footnote mandates behaviour for an ill-formed program.   Strike "no diagnostic required" and the associated footnote.   CWG  816  ACCEPTED  
US 42 7.6.4   The meaning of the [[final]] attribute applied to classes is inconsistent with other languages and not desirable in its own right.   Modify the semantics of [[final]] applied to classes. See the attached paper "Issues with the C++ Standard" under Chapter 7 "Meaning of [[final]] attribute applied to classes".   CWG  817  ACCEPTED  
UK 109
[392]
7.6.5 ¶ 4   The example code refers in comments to "Compilation unit" A and B. The term should be "Translation unit" (2/1)   Replace "Compilation" with "Translation" in two places   editor    ACCEPTED  
UK 110
[393]
7.6.5 ¶ 4   The code in the example (compilation unit A) has: "foo_head[i].load(memory_order_consume)". foo_head[i] is of type foo *, so it does not have a load member.   Change the type of foo_head to atomic<foo *>[].   CWG    ACCEPTED

See paper N2841 
US 43 8   With the introduction of late-specified return types for functions and lambda expressions, we now have three different syntaxes for declaring functions. The -> late declaration is used in two. The auto keyword is used in one, but also used differently in variable definitions.   Some simplification is needed.   CWG    REJECTED

There was no consensus to make a change.  
UK 111
[457]
8.3.5 ¶ 13   Example missing closing bracket in template<typename... T> void f(T (* ...t)(int, int);   Add closing bracket like this: template<typename... T> void f(T (* ...t)(int, int));   editor    ACCEPTED  
US 44 8.3.5 ¶ 13   In the Example, "template void f(T (* ...t)(int, int);" is missing a close parenthesis.   It presumably should read: "template void f(T (* ...t))(int, int);".   editor    ACCEPTED  
US 45 8.3.5 ¶ 13   At present, function parameter packs can only occur at the end of a parameter-declaration-list. This restriction unnecessarily prohibits uses of function parameter packs in cases where template argument deduction isn’t needed, e.g.,

template<class... T> struct X { };

template<class... T1, class... T2>
struct X<pair<T1, T2>...> {
void f(T1..., T2...);
};

More importantly, this restriction is inconsistent with the way pack expansions are handled. For example, this template is well-formed (but X<T..., int> is a non-deduced context):

template<class... T> void f(X<T..., int>);

Therefore, the restriction that limits function parameter packs to the end of the parameter-declaration-list should be removed. Instead, function parameter packs not at the end of the parameter-declaration-list should be considered non-deduced contexts.  
In 8.3.5p13, remove the sentence “A function parameter pack, if present, shall occur at the end of the parameter-declaration-list.”

In 14.8.2.1p1, replace the phrase “For a function parameter pack” with “For a function parameter pack that occurs at the end of a parameter-declaration-list”.

Replace the note text “A function parameter pack can only occur at the end of a parameter-declaration-list (8.3.5).” with “A function parameter pack that does not occur at the end of a parameter-declaration-list is a non-deduced context.”

In 14.8.2.5p5, add a new bullet: “A function parameter pack that does not occur at the end of its parameter-declaration-list.”

In 14.8.2.5p10, replace “If the parameter-declaration corresponding to Pi is a function parameter pack” with “If the parameter-declaration corresponding to Pi is a function parameter pack and Pi occurs at the end of the parameter-declaration-list”.

Replace the note text “A function parameter pack can only occur at the end of a parameter-declaration-list (8.3.5).” with “A function parameter pack that does not occur at the end of a parameter-declaration-list is a non-deduced context.”  
CWG  818  ACCEPTED

See paper N3079 
DE 13 8.4 ¶ p2   DE-13 The second paragraph, quoting the grammar for the declarator of a function declaration, is not considering late-specified return types and attributes.   Properly quote the grammar from 8.3.5.   CWG  732  ACCEPTED

See paper N2927 
JP 16 8.5 ¶ 15th para, 1st line   Typo, duplicated "in"

"The initialization that occurs in in the forms"  
Remove one.   editor    ACCEPTED  
US 46 8.5.3   The ability for an rvalue reference to bind to an lvalue opens a type-safety hole that becomes very dangerous with concepts. For example, consider vector’s push_back operation:

requires MoveConstructible<T> void push_back(T&&);

requires CopyConstructible<T> void push_back(const T&);

For a copy-constructible T (which is also move-constructible), push_back does the right thing. However, if T is something that is move-constructible (e.g., unique_ptr<int>), the second overload is removed from considered (it is effectively SFINAE’d away), so only the first overload remains. Therefore, one could accidentally call push_back with an lvalue of type T, and push_back would silently move from the lvalue. The same problem occurs without concepts (albeit less frequently).  
Prohibit rvalue references from binding to lvalues.

Unfortunately this change will break some current use cases of rvalue reference including the use of rvalue streams, and of the forward function itself. To resolve this we may want to consider three types of references:
  1. The current reference.
  2. A non-const reference that only binds to rvalues.
  3. A non-const reference that will bind to both lvalues and rvalues.
Still another solution would be to adopt the “deleted function” solution for all functions. This solution is described in comment for 12.1, 12.4, 12.8, but restricted to special functions in that comment. (See US NN).  
CWG    ACCEPTED

See paper N2844 
US 49 8.5.4 ¶ 6   In the Example, the comments could be improved.   See the attached paper "Issues with the C++ Standard" under "Editorial Issues" and "8.5.4/6".   editor    ACCEPTED  
UK 112
[440]
9 ¶ 4-9   We now have concepts that should (or should not?) map to the terms described in Clause 9 - these should be at least referenced.   Add appropriate forward references to 14.9.4   editor    ACCEPTED with MODIFICATIONS

All concepts-related features have been removed from the draft.  
UK 113
[250]
9.4.2 ¶ 3   Mis-applied edit from the paper n2756   The term 'constant-initializer' should have been struck out when replaced by brace-or-equal-initializer. There are two occurrences in this paragraph   editor    ACCEPTED  
US 50 12.1, 12.4, 12.8   Implicitly-declared default constructors, destructors, copy constructors, and copy assignment operators are deleted when their definitions would be ill-formed. However, unlike with overloading and template argument deduction, access control is performed as part of the check for making one of these special function deleted. This inconsistency should be removed.

This change would sacrifice some backward compatibility in favor of consistency. With the current wording, checking that the following class ‘A’ is CopyConstructible would proceed without error (it is not CopyConstructible):

class A { A(const A&); };

With the proposed change, testing whether A is CopyConstructible would produce a diagnostic. To fix the problem, the user would have to use a deleted function:

class A { A(const A&) = delete; };  
In 12.1p5, remove the phrase “or inaccessible from the implicitly-declared default constructor”.

In 12.4p3, remove the phrase “or a destructor that is inaccessible from the implicitly-declared destructor,” and the phrase “or a destructor that is inaccessible from the implicitly-declared destructor”.

In 12.8p5, remove the phrase “or inaccessible from the implicitly-declared copy constructor” from the two places it occurs.

In 12.8p10, remove the phrase “or inaccessible from the implicitly-declared copy assignment operator” from the two places it occurs.  
CWG  819  REJECTED

The current treatment is sufficiently useful to warrant the inconsistency with the other handling of access control. In particular, it enables such cases to be detected by SFINAE.  
FR 28 12.6.1 [Explicit initialization]   This section, in particular the example with `g' appears contradictory with the syntax for uniform initialization.     CWG    ACCEPTED

See paper N2841 
US 51 12.6.2 ¶ 2   The discussion of delegating constructors should be in its own paragraph.     editor    ACCEPTED  
UK 114
[167]
12.6.2 ¶ 1   Despite all the attempts to unify initialization syntax, it is still not possible to copy-initialize base classes or non-static data members, which means the explicit keyword cannot have a bearing during evaluation of a constructor. A minimal addition to the grammar, allowing an optional = between the mem-initializer-id and braced-init-list would allow the user to choose between copy and direct initialization   Ammend the grammar for mem-initializer: mem-initializer-id =OPT braced-init-list Extend p3 to allow for Copy Initialization if the optional = is present: 3 The expression-list or braced-init-list in a mem-initializer is used to initialize the base class or non-static data member subobject denoted by the mem-initializer-id according to the initialization rules of 8.5 for direct-initialization, OR COPY-INITIALIZATION IF THE OPTIONAL = IS PRESENT BETWEEN THE MEM-INITIALIZER-ID and the BRACED-INIT-LIST. [Example:...   CWG    ACCEPTED with MODIFICATIONS

There was no consensus for making the change as described. The concerns are addressed for members (but not for base classes) by using the "=" form of the brace-or-equal-initializer on a member declaration instead of a mem-initializer.  
US 52 13.5.8 ¶ ¶ 5   A word is misspelled.   Change “shal” to “shall”.   editor    ACCEPTED  
UK 115
[432]
14 ¶ 6-11   Exported templates were a great idea that is generally understood to have failed. In the decade since the standard was adopted, only one implementation has appeared. No current vendors appear interested in creating another. We tentatively suggest this makes the feature ripe for deprecation. Our main concern with deprecation is that it might turn out that exported constrained templates become an important compile-time optimization, as the constraints would be checked once in the exported definition and not in each translation unit consuming the exported declarations.   Consider deprecating exported templates, but no action yet. Examine interaction with constrained templates, and see if other more appropriate mechanism will support compile-time optimization.   CWG  820  ACCEPTED with MODIFICATIONS

The Committee decided to remove the feature altogether instead of deprecating it.

See paper N3065 
UK 116
[434]
14 ¶ 6-11   Is it possible to export a concept map template? The current wording suggests it is possible, but it is not entirely clear what it would mean.   Either prohibit exporting concept map templates, or more directly address what it means to export a concept map.   CWG  821  ACCEPTED with MODIFICATIONS

All concepts-related features have been removed from the draft.  
UK 117
[430]
14 ¶ 2   It would be nice to allow template alias within a function scope, and possibly a scoped concept map. As these affect name lookup and resolution, rather than defining new callable code, they are not seen to present the same problems that prevented class and function templates in the past.   Allow template aliases to be declared inside a function scope, and consider scoped concept maps.   CWG  822  REJECTED

There was non consensus for making this change at this point in the standardization process.  
UK 118
[431]
14 ¶ 6-11   Exported templates are a complicated feature with surprisingly little text. To make this important text more visible, split it off into its own subclause [temp.export]   Create a new subclause [temp.export] containing 14p6-11. Move 14p12 ahead of this subclause.   editor    ACCEPTED  
UK 119
[433]
14 ¶ 4   Does a concept map have linkage? Reading this paragraph and 3.5 suggests a concept map template has external linkage, but not a 'regular' concept map. Believe this is an oversight that the linkage words were not updated to provide an exception, rather than linkage of concept maps is intended.   Add an exception that concept map templates have no linkage, or add concept maps to the list of entities with linkage in 3.5   CWG  791  ACCEPTED with MODIFICATIONS

All concepts-related features have been removed from the draft.  
UK 120
[422]
14.1 ¶ 9   As this is the first time the phrase “parameter pack” appears in Ch 14 I would like to see the section 8.3.5 referenced here (as well as in 14.1p17).   Insert “(8.3.5)” after “parameter pack”   editor    ACCEPTED  
UK 121
[423]
14.1 ¶ 18   The example (that follows the normative text) has no begin example marker   Prefix the example code with "[ Example:"   editor    ACCEPTED  
FR 29 14.3 [Template arguments]   Constant expressions of any literal type should be allowed as template arguments.     CWG  823  ACCEPTED with MODIFICATIONS

There was no consensus for the suggested change. A problem was discovered that literal types with constexpr conversion functions to literal and enumeration types were not allowed, and issue 823 was opened to address this omission.  
US 53 14.5.1 ¶ 5   If the requirements of a constrained member that is a copy constructor, copy assignment operator, or destructor are not satisfied, then that user-declared special function will not exist. It appears that, in this case, the special function will then be implicitly defined, which is likely to either (a) fail to compile or (b) produce a function with the wrong semantics. For example:

template<ObjectType T> class vector {
T* first, last, end;
public:
requires CopyConstructible<T> vector(const vector&);
};

If instantiated with a type that is not CopyConstructible, vector will get an implicitly-defined copy constructor that performs a copy of the pointers.  
Add to 14.5.1p5:

If the constrained member is a copy constructor (12.8), destructor (12.4), or copy assignment operator and its template requirements are not satisfied, then a copy constructor, destructor, or copy assignment operator, respectively, with the same signature as the constrained member (after substituting the class template’s template arguments for its template parameters) will be declared as a deleted function (8.4).  
CWG  824  ACCEPTED with MODIFICATIONS

All concepts-related features have been removed from the draft.  
UK 122
[426]
14.5.3 ¶ 4   Variadic templates should be supported in axioms. There are axioms in the library that rely on this feature, such as the FrontEmplacement axiom in FrontEmplacementContainer (23.1.6.1p10)   Add clarification in p2 that function parameter packs can be used to declare axioms, much like p1 clarifies they can be used to declare concepts as well as templates.   CWG    ACCEPTED with MODIFICATIONS

All concepts-related features have been removed from the draft.  
FR 30 14.5.7 [Template aliases]   When are two template alias names equivalent? E.g. given

template<template<class> class> struct X { };

template<typename,typename> struct Y { };
template<typename T>
using Z1 = Y<int,T>;
template<typename T>
using Z2 = Y<int,T>;

Are the types X<Z1> and X<Z2> equivalent?

We would suggest yes (since Z1<T> and Z2<T> are the same for all T), but we do not see any wording to that effect.  
  CWG    REJECTED

This is already clear in the Standard; see 14.5.7 paragraph 2 and 14.4 paragraph 1. The last example in 14.4 paragraph 1 is very similar to the one given here.  
JP 17 14.7.2 ¶ 2nd para, 15th line   Typo.

if that namespace is inline, any namespace from its enclosing namespace set.

should be

if that namespace is inline, any namespace forming its enclosing namespace set.  
Replace "from" with "forming"   CWG    REJECTED

The current wording is correct.  
DE 14 14.7.3 ¶ p1   DE-14 The bulleted list neither addresses "member function template of a class" nor "member class template of a class".   Add the respective bullets.   CWG  730  ACCEPTED  
JP 18 14.7.3 ¶ 2nd para, 2nd line   Typo,

any namespace from its enclosing namespace set

should be

any namespace forming its enclosing namespace set  
Replace "from" with "forming"   CWG    REJECTED

The current wording is correct.  
JP 19 14.8.2 ¶ 6th para, 1st line   Typo, duplicated "is"

"At certain points in the template argument deduction process it is is necessary"  
Remove one   editor    ACCEPTED  
US 54 14.9 [concept], 14.10 [temp. constrained]   Concepts is of course the largest new feature in C++0x (in terms of new text inserted into the wording), and already we have found some significant defects with it. So far nothing devastating has been found, but more time is needed to shake more bugs out.   I propose no specific change here.   CWG    ACCEPTED

All concepts-related features have been removed from the draft.  
US 55 14.9.1 ¶ ¶ 6   The paragraph number is in the wrong place, causing a grammar rule to be indented more than its fellows.   Move the paragraph number so as to follow the grammar rules, thus numbering the single sentence, “The body of a concept … .”   editor    ACCEPTED  
US 56 14.9.1 ¶ ¶ 6   The sentence contains two references to 14.9.1.3 [concept.req].   Change the second such reference (at the end of the sentence) to 14.9.1.4 [concept.axiom].   editor    REJECTED

Yes; they apply to different terms.  
US 57 14.9.1.4 ¶ ¶ 3   A word is misplaced, changing the intended meaning.   Change “only find … if” to “find … only if”.   editor    REJECTED

These mean the same thing, and the latter is stilted.  
US 58 14.9.1.4 ¶ ¶ 3   The listed phrases are not grammatically parallel.   Insert “in” before “one” so as to obtain “... in the concept, in one of its less refined concepts, or in an associated requirement.”   editor    ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
US 59 14.9.1.4   Axioms are under-specified and provide little benefit to programmers, so they should be removed from the working paper. The optimizations permitted by axioms (see 14.9.1.4p4-5) are not compulsory (and, therefore, programmers cannot rely on them) and the semantics expressed by axioms cannot be verified by any implementation. The resulting specification has lead to great confusion (see the reflector thread “Are floating point types Regular?” starting with c++std-lib-22717). Given the level of confusion and the inability to verify the correctness of axioms, it is likely that many axioms written by programmers (including those specified in the candidate draft) will be incorrect.   Remove clause 14.9.1.4 [concept.axiom]

In 2.11p1, remove “axiom” from the list of keywords.

In 14.5.8p7, remove “, or if the resulting concept map fails to satisfy the axioms of the corresponding concept”

In 14.9.1p6, remove axiom-definition from the list of grammar productions for concept-member-specifier. Remove “, and axioms” from the final sentence, and instead “and” prior to “associated requirements” in the final sentence.

Remove paragraph 14 of clause 14.9.2.

In 14.10.1p6, remove the sentence, “When the concept-instance-alias-def appears in the optional requires-clause of an axiom-definition (14.9.1.4), the potential scope of the identifier begins at its point of declaration and terminates at the end of the axiom-definition.”

In clauses 20.2.5, 20.2.8, 23.1.6.1, 23.1.6.2, and 24.1.4, remove the axiom-definitions and replace them with paragraphs (denoted Requires, Postconditions, or Effects, as appropriate) that express the intended semantics of the concepts from which the axiom-definitions were removed.

In 24.1.4p2, replace the word “axiom” with “condition.”  
CWG    ACCEPTED

All concepts-related features have been removed from the draft.  
FR 31 14.9.1.4 [Axioms]   This section states that an axiom-definition defines a new semantics axiom but is unusually vague as to what those semantics might be.

The use of the '==' and '!=' with completely new semantics, unrelated to anything we have seen before in C++ is both unwise and confusing, especially if the types involved in the expressions happen to have operator== and operator!= defined.

We strongly suggest use of different tokens, e.g. , and opposed to this obscure usage/overload.

The description is very vague. How many times is an implementation permitted to replace one expression by another one when they have side effects?  
  CWG    ACCEPTED with MODIFICATIONS

All concepts-related features have been removed from the draft.  
DE 15 14.9.1.4   DE-15 There is no implementation experience for axioms. Use of axioms is an area of active scientific research. It is likely that syntax changes will become necessary to make good use of axioms; having the syntax space already crowded is unhelpful. Axioms ought to be useful in concepts applicable to floating-point types (such as EqualityComparable), but IEEE floating-point types have special values such as NaN violating the axioms.   Remove section 14.9.1.4 and any reference to axioms in the rest of the proposed standard other than the keyword reservation in section 2.11.   CWG    ACCEPTED

All concepts-related features have been removed from the draft.  
UK 123
[248]
14.9.1.4   auto concepts and axioms are incompatible. An axiom defines the semantics of an operaton or set of operations that describes the run time behaviour. A concept describes purely syntactic requirements at compile time. Where an auto concept will match anything that meets the syntax requirements, there is no way to know if the axioms will be met or not, and no way to opt out via some kind of negative concept map.   Add a paragraph making axioms ill-formed inside an auto concept.   CWG    ACCEPTED with MODIFICATIONS

All concepts-related features have been removed from the draft.  
UK 124
[288]
14.9.1.4 ¶ 6   Spelling mistake, double-e in were.   weere -> were   editor    ACCEPTED  
UK 125
[289]
14.9.1.4 ¶ 2   The implicit equality comparison operator available to axioms has no semantic. It is not clear what expressing the condition if( a == b ) { conditional-axiom } would mean if a and b are not truly EqualityComparable. We suspect the intent of the 'implicit defefinition' is to support declaring the equivalence of statements, a context where the operator will not actually be evaluated.   Define the semantics of the implicitly declared comparison operators, or restrict their usage to declaring equivalence between statements.   CWG    ACCEPTED with MODIFICATIONS

All concepts-related features have been removed from the draft.  
UK 126
[438]
14.9.4 ¶ 41   This paragraph contains the only definition of the underlying_type member - but it's a note, so not normative.   Move the second sentence to the Requires clause in paragraph 42.   editor    ACCEPTED  
UK 127
[118]
14.9.4   Provide a diagram clearly showing refinement relationship between the different support concepts. Several were created during development of this clause and they were very helpful.   Provide the diagram.   editor    ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 128
[435]
14.9.4 ¶ 4   It is surprising for many people that non-copyable move-only types can be used with a return statement, and so Returnable does not always imply CopyConstructible.   A non-normative note: [Note: 'move only' types that are constructible from rvalue references may be Returnable, but not CopyConstructible(20.1.8) - end note]   editor    ACCEPTED  
JP 20 14.9.4 ¶ 2nd para   Trivially copyable type was added in “3.9 Types”, so we think that it is necessary to add concept to trivially copyable type like “TriviallyCopyableType”.   Add TriviallyCopyableType that is trivially copyable type as concept.   CWG  825  ACCEPTED with MODIFICATIONS

All concepts-related features have been removed from the draft.  
UK 129
[128]
14.10.1, 20.1.2   It should be possible to support boolean constant expressions as requirements without resorting to defining the True concept in the library. Boolean expressions are very likely to be constraints when deadline with non-type template parameters and variadic templates, and constraints in these cases should feel just as natural as constraints on the type system.   Remove the True concept and library subclause 20.1.2. Provide support in 14.10.1 for boolean constant expressions as constraints. This may involve overloading the true keyword to disambiguate but ideally would not.   CWG  826  ACCEPTED with MODIFICATIONS

All concepts-related features have been removed from the draft.  
US 60 14.10.1 ¶ 1   The use of && as the separator for a list of requirements has shown itself to be a serious teachability problem. The mental model behind ‘&&’ treats concepts as simple predicates, which ignores the role of concepts in type-checking templates. The more programmers read into the ‘&&’ (and especially try to fake || with && and !), the harder it is for them to understand the role of concept maps. Simply changing the separator to ‘,’ would eliminate a significant source of confusion.   Replace

requirement-list:
requirement-list ... [opt] && requirement
requirement ... [opt]

with

requirement-list
requirement-list ...[opt] , requirement
requirement ... [opt]

In 14.5.4p6, replace the first sentence with:

The instantiation of an expansion produces a comma-separated list E1, E2, ..., EN, where N is the number of elements in the pack expansion parameters.  
CWG  827  ACCEPTED with MODIFICATIONS

All concepts-related features have been removed from the draft.  
UK 130
[32]
15.1 ¶ 4   With the new crrent_exception API it is possible to capture a reference to an exception that will outlive its last active handler. That is in conflict with the sentance "When the last remaining active handler for the exception exits by any means other than throw; the temporary object is destroyed and the implementation may deallocate the memory for the temporary object;"   Update sentence to allow for exceptions held in excpetion_ptr objects.   CWG  828  ACCEPTED  
UK 131
[34]
15.3 ¶ 3   A handler catching its parameter by rvalue-reference is syntactically valid, but will never be activated.   Disallow handlers catching by rvalue-reference.   CWG    ACCEPTED

See paper N2844 
UK 132
[36]
15.3 ¶ 16   There are obscure cases whrere a copy constructor is not usually the best match to copy-initialize an object, e.g. A converting constructor template taking arguments by non-const reference. A footnote explaining such cases would be helpful, or the sentance could be rewritten using copy-initialization instead of directly calling a copy constructor.   Rewite using copy-initialization rather than directly invoking the copy constructor   CWG    ACCEPTED

See paper N2841 
UK 133
[37]
15.4 ¶ 2   Template aliases have the same semantics as a typedef so should also be disallowed   add "or alias-declaration" after "shall not appear in a typedef declaration".   CWG    ACCEPTED

See paper N2841 
UK 134
[38]
15.4 ¶ 6   The sentance "An exception-specification can also include the class std::bad_exception (18.7.2.1)." is redundant.   Either strike the quoted sentance, or add a note explaining why it is worth calling special attention to this class.   editor    ACCEPTED  
UK 135
[39]
15.4 ¶ 8   Unclear if std::unexpected is called before or after the function arguments have been destroyed   Clarify the sequence of calling unexpected with respect to interesting objects, such as function arguments or partially constructed bases and members when called from a constructor or destructor   CWG  829  REJECTED

15.5.2 paragraph 1 specifies that std::unexpected is called “immediately after completing stack unwinding” for the function whose exception-specification has been violated.  
UK 136
[40]
15.4   Exception specifications have proven close to worthless in practice, while adding a measurable overhead to programs. The feature should be deprecated. The one exception to the rule is the empty throw specification which could serve a legitimate optimizing role if the requirement to call the runtime unexpected mechanism was relaxed in this case.   Move 15.4 and the parts of 15.5 that refer to it to Appendix D. Replace 15.4 with a simpler specification for empty throw specifications, where the std::unexpected call is conditionally supported allowing vendors to choose between optimizing and providing runtime checks. Ideally require vendors to provide a mode where the runtime checks are always disabled.   CWG  830  ACCEPTED

See paper N3051 
UK 137
[44]
15.5   There is no mention of the current_exception API which can extend the lifetime of an exception object. There should at least be a forward reference to the library clause 18.7.5   Add another paragraph outlining 18.7.5 and the ability of an exception_ptr to extend the lifetime of an exception object   editor    ACCEPTED  
UK 138
[41]
15.5.1 ¶ 1   The third bullet is redundant with the first, as it is a subset of the same conditions.   Merge the third bullet into the first bullet as a note or example.   editor    REJECTED

They're subtly different. The first bullet is about calls made to create, copy, and destroy the exception object itself. The third bullet is about destructors of stack objects during stack unwinding.  
UK 139
[42]
15.5.1 ¶ 1   According to the first bullet it is perfectly alright for a library function to exit by throwing an exception during stack unwinding, This is clearly not true.   Strike the word 'user' from the first bullet point.   CWG    ACCEPTED

See paper N2841 
UK 140
[43]
15.5.2 ¶ 2   The detailed specification can fool people into thinking an exception will automatically be translated into bad_exception, where the default behaviour of std::unexcepted is to immediately call std::terminate();   Add a note highlighting the default behaviour of std::unexpected if the user does not supply a hander-function   editor    ACCEPTED  
UK 141
[45]
15.6   This whole subclause is redundant due to 15.1p5 and 15.3p17   Strike 15.6   editor    ACCEPTED  
UK 142
[455]
16.3.5 ¶ 3   This paragraph opens with "[ Note" but has no corresponding "end note ]"   Add "end note ]"   editor    ACCEPTED  
UK 143
[456]
16.3.5 ¶ 7   Example uses #define t(x,y.z) x ## y ## z   Change "x,y.z" to "x,y,z"   editor    ACCEPTED  
US 2 17-30   The active issues identified in WG21 N2806, C++ Standard Library Active Issues, must be addressed and appropriate action taken.
http://www.open-std.org/jtc1/sc22/wg21/docs/lwg-active.html  
Appropriate action would include making changes to the CD, identifying an issue as not requiring a change to the CD, or deferring the issue to a later point in time.   LWG  N/A  ACCEPTED  
FR 2 General Comment ¶ Library   The adoption of the library `constexpr' proposal was not reflected in the draft, despite formal WG21 committee vote.   FR 2   LWG  1156  REJECTED

NB did not sufficiently describe how to resolve their comment, and therefore we cannot make a change for the FCD. If a resolution were provided in the future, we would be happy to apply it.  
US 61 17 onward   The concepts core language feature is applied to only some of the Standard Library clauses, and even then not always consistently.   Review all clauses of the Standard Library, and consistently apply concept technology wherever possible and appropriate. The proposed wording in WG21 N2781 exemplifies the necessary level of detail.   LWG  N/A   
CA 2 17 Library   “Concepts” are a significant new addition to the language, but are not exploited uniformly in the library as documented in CD 14882.   Fix the standard library so that “Concepts” are used appropriately in the library.   LWG  N/A  ACCEPTED  
US 62 17-30   Provide concepts and requirements clauses for all standard library templates     LWG  N/A   
US 63 17-30   The behavior of the library in the presence of threads is incompletely specified.

For example, if thread 1 assigns to X, then writes data to file f, which is read by thread 2, and then accesses variable X, is thread 2 guaranteed to be able to see the value assigned to X by thread 1? In other words, does the write of the data "happen before" the read?

Another example: does simultaneous access using operator at() to different characters in the same non-const string really introduce a data race?  
  LWG  1151  ACCEPTED with MODIFICATIONS

Resolved by N3069  
DE 2 17 through 30   DE-2 Marking a constructor with "explicit" has semantics even for a constructor with zero or several parameters: Such a constructor cannot be used with list-initialization in a copy-initialization context, see 13.3.1.7. The standard library apparently has not been reviewed for marking non-single-parameter constructors as "explicit".   Consider marking zero-parameter and multi-parameter constructors "explicit" in classes that have at least one constructor marked "explicit" and that do not have an initializer-list constructor.   LWG  1153  REJECTED

We don't see a specific problem right now. Will reopen this issue of examples of breakage are pointed out to us.  
JP 21 17 Library 21.2, 21.4, 27.2, 27.6, 27.7, 27.8.1, 28.4   Support of char16_t/char32_t is insufficient. The basic_xxx classes of <iostream>, <fstream>, <regex>, etc. does not have typedefs for char16_t/char32_t.

Functions such as stoi, to_string in ‘21.4 Numeric Conversion’ does not support char16_t/char32_t types.  
Add commented lines corresponding to char16_t, char32_t.

21.2 paragraph1

namespace std {
...

// 21.4: numeric conversions
...

int stoi(const u16string& str, size_t *idx = 0, int base = 10);
long stol(const u16string& str, size_t *idx = 0, int base = 10);
unsigned long stoul(const u16string& str, size_t *idx = 0, int base = 10);
long long stoll(const u16string& str, size_t *idx = 0, int base = 10);
unsigned long long stoull(const u16string& str, size_t *idx = 0, int base = 10);
float stof(const u16string& str, size_t *idx = 0);
double stod(const u16string& str, size_t *idx = 0);
long double stold(const u16string& str, size_t *idx = 0);
u16string to_u16string(long long val);
u16string to_u16string(unsigned long long val);
u16string to_u16string(long double val);

int stoi(const u32string& str, size_t *idx = 0, int base = 10);
long stol(const u32string& str, size_t *idx = 0, int base = 10);
unsigned long stoul(const u32string& str, size_t *idx = 0, int base = 10);
long long stoll(const u32string& str, size_t *idx = 0, int base = 10);
unsigned long long stoull(const u32string& str, size_t *idx = 0, int base = 10);
float stof(const u32string& str, size_t *idx = 0);
double stod(const u32string& str, size_t *idx = 0);
long double stold(const u32string& str, size_t *idx = 0);
u32string to_u32string(long long val);
u32string to_u32string(unsigned long long val);
u32string to_u32string(long double val);
}

27.2

namespace std {
...
typedef basic_ios<char> ios;
typedef basic_ios<wchar_t> wios;
typedef basic_ios<char16_t> u16ios;
typedef basic_ios<char32_t> u32ios;

...
typedef basic_ifstream<wchar_t> wifstream;
typedef basic_ofstream<wchar_t> wofstream;
typedef basic_fstream<wchar_t> wfstream;

typedef basic_streambuf<char16_t> u16streambuf;
typedef basic_istream<char16_t> u16istream;
typedef basic_ostream<char16_t> u16ostream;
typedef basic_iostream<char16_t> u16iostream;

typedef basic_stringbuf<char16_t> u16stringbuf;
typedef basic_istringstream<char16_t> u16istringstream;
typedef basic_ostringstream<char16_t> u16ostringstream;
typedef basic_stringstream<char16_t> u16stringstream;
typedef basic_filebuf<char16_t> u16filebuf;

typedef basic_ifstream<char16_t> u16ifstream;
typedef basic_ofstream<char16_t> u16ofstream;
typedef basic_fstream<char16_t> u16fstream;

typedef basic_streambuf<char32_t> u32streambuf;
typedef basic_istream<char32_t> u32istream;
typedef basic_ostream<char32_t> u32ostream;
typedef basic_iostream<char32_t> u32iostream;

typedef basic_stringbuf<char32_t> u32stringbuf;
typedef basic_istringstream<char32_t> u32istringstream;
typedef basic_ostringstream<char32_t> u32ostringstream;
typedef basic_stringstream<char32_t> u32stringstream;
typedef basic_filebuf<char32_t> u32filebuf;

typedef basic_ifstream<char32_t> u32ifstream;
typedef basic_ofstream<char32_t> u32ofstream;
typedef basic_fstream<char32_t> u32fstream;

...
template <class state> class fpos;
typedef fpos<char_traits<char>::state_type> streampos;
typedef fpos<char_traits<wchar_t>::state_type> wstreampos;
typedef fpos<char_traits<char16_t>::state_type> u16streampos;
typedef fpos<char_traits<char32_t>::state_type> u32streampos;
}

27.6

namespace std {
template <class charT, class traits = char_traits<charT> >
class basic_istream;
typedef basic_istream<char> istream;
typedef basic_istream<wchar_t> wistream;
typedef basic_istream<char16_t> u16istream;
typedef basic_istream<char32_t> u32istream;

template <class charT, class traits = char_traits<charT> >
class basic_iostream;
typedef basic_iostream<char> iostream;
typedef basic_iostream<wchar_t> wiostream;
typedef basic_iostream<char16_t> u16iostream;
typedef basic_iostream<char32_t> u32iostream;
}

namespace std {
template <class charT, class traits = char_traits<charT> >
class basic_ostream;
typedef basic_ostream<char> ostream;
typedef basic_ostream<wchar_t> wostream;
typedef basic_ostream<char16_t> u16ostream;
typedef basic_ostream<char32_t> u32ostream;
}

27.7 paragraph 1

namespace std {
template <class charT, class traits = char_traits<charT>,
class Allocator = allocator<charT> >
class basic_stringbuf;

typedef basic_stringbuf<char> stringbuf;
typedef basic_stringbuf<wchar_t> wstringbuf;
typedef basic_stringbuf<char16_t> u16stringbuf;
typedef basic_stringbuf<char32_t> u32stringbuf;

template <class charT, class traits = char_traits<charT>,
class Allocator = allocator<charT> >
class basic_istringstream;

typedef basic_istringstream<char> istringstream;
typedef basic_istringstream<wchar_t> wistringstream;
typedef basic_istringstream<char16_t> u16istringstream;
typedef basic_istringstream<char32_t> u32istringstream;

template <class charT, class traits = char_traits<charT>,
class Allocator = allocator<charT> >
class basic_ostringstream;

typedef basic_ostringstream<char> ostringstream;
typedef basic_ostringstream<wchar_t> wostringstream;
typedef basic_ostringstream<char16_t> u16ostringstream;
typedef basic_ostringstream<char32_t> u32ostringstream;

template <class charT, class traits = char_traits<charT>,
class Allocator = allocator<charT> >
class basic_stringstream;

typedef basic_stringstream<char> stringstream;
typedef basic_stringstream<wchar_t> wstringstream;
typedef basic_stringstream<char16_t> u16stringstream;
typedef basic_stringstream<char32_t> u32stringstream;
}

27.8.1 paragraph 1

namespace std {
template <class charT, class traits = char_traits<charT> >
class basic_filebuf;
typedef basic_filebuf<char> filebuf;
typedef basic_filebuf<wchar_t> wfilebuf;
typedef basic_filebuf<char16_t> u16filebuf;
typedef basic_filebuf<char32_t> u32filebuf;

template <class charT, class traits = char_traits<charT> >
class basic_ifstream;
typedef basic_ifstream<char> ifstream;
typedef basic_ifstream<wchar_t> wifstream;
typedef basic_ifstream<char16_t> u16ifstream;
typedef basic_ifstream<char32_t> u32ifstream;

template <class charT, class traits = char_traits<charT> >
class basic_ofstream;
typedef basic_ofstream<char> ofstream;
typedef basic_ofstream<wchar_t> wofstream;
typedef basic_ofstream<char16_t> u16ofstream;
typedef basic_ofstream<char32_t> u32ofstream;

template <class charT, class traits = char_traits<charT> >
class basic_fstream;
typedef basic_fstream<char> fstream;
typedef basic_fstream<wchar_t> wfstream;
typedef basic_fstream<char16_t> u16fstream;
typedef basic_fstream<char32_t> u32fstream;
}

28.4

namespace std {
...
typedef basic_regex<char> regex;
typedef basic_regex<wchar_t> wregex;
typedef basic_regex<char16_t> u16regex;
typedef basic_regex<char32_t> u32regex;

...
typedef sub_match<const char*> csub_match;
typedef sub_match<const wchar_t*> wcsub_match;
typedef sub_match<const char16_t*> u16csub_match;
typedef sub_match<const char32_t*> u16csub_match;
typedef sub_match<string::const_iterator> ssub_match;
typedef sub_match<wstring::const_iterator> wssub_match;
typedef sub_match<u16string::const_iterator> u16ssub_match;
typedef sub_match<u32string::const_iterator> u32ssub_match;

...
typedef match_results<const char*> cmatch;
typedef match_results<const wchar_t*> wcmatch;
typedef match_results<const char16_t*> u16cmatch;
typedef match_results<const char32_t*> u32cmatch;
typedef match_results<string::const_iterator> smatch;
typedef match_results<wstring::const_iterator> wsmatch;
typedef match_results<u16string::const_iterator> u16smatch;
typedef match_results<u32string::const_iterator> u32smatch;

...
typedef regex_iterator<const char*> cregex_iterator;
typedef regex_iterator<const wchar_t*> wcregex_iterator;
typedef regex_iterator<const cha16r_t*> u16cregex_iterator;
typedef regex_iterator<const char32_t*> u32cregex_iterator;
typedef regex_iterator<string::const_iterator> sregex_iterator;
typedef regex_iterator<wstring::const_iterator> wsregex_iterator;
typedef regex_iterator<u16string::const_iterator> u16sregex_iterator;
typedef regex_iterator<u32string::const_iterator> u32sregex_iterator;

...
typedef regex_token_iterator<const char*> cregex_token_iterator;
typedef regex_token_iterator<const wchar_t*> wcregex_token_iterator;
typedef regex_token_iterator<const char16_t*> u16cregex_token_iterator;
typedef regex_token_iterator<const char32_t*> u32cregex_token_iterator;
typedef regex_token_iterator<string::const_iterator> sregex_token_iterator;
typedef regex_token_iterator<wstring::const_iterator>    wsregex_token_iterator;
typedef regex_token_iterator<u16string::const_iterator> u16sregex_token_iterator;
typedef regex_token_iterator<u32string::const_iterator>  u32sregex_token_iterator;
}  
LWG    REJECTED

Previously considered; we decided not to do it. We believe it is not too onerous to use wbuffer_convert and wstring_convert which were added as intermediaries to avoid proliferation of types.  
UK 144
[72]
17.1 ¶ 2   List of contents of library should be extened to cover new clauses   Add "regular expressions, atomic operations and threads"   editor    ACCEPTED  
UK 145
[73]
17.1 ¶ 6   Summary of numeric facilities should mention random numbers   Add random number framework to the list of library facilities   editor    ACCEPTED  
UK 146
[74]
17.1   Add a summary paragraph for regular expressions   Add a summary paragraph for regular expressions   editor    ACCEPTED  
UK 147
[75]
17.1   Add a summary paragraph for threads   Add a summary paragraph for threads   editor    ACCEPTED  
UK 148
[247]
17.2 ¶ Table 12   Table 12 is mentioned in and relates to section 17.2, but has been pushed down to appear directly after the title of section 17.3 which is rather unfortunate/confusing for the reader.   Make sure tables are rendered in the section to which they relate.   editor    ACCEPTED  
UK 149
[84]
17.3   For consistency with narrow-oriented and wide-oriented streams, we should add terms for streams of Unicode character sequences   Define Utf16-oriented stream classes and Uft32-oriented stream classes for streams of char16_t/char32_t values.   editor    ACCEPTED with MODIFICATIONS

The terms "narrow-oriented iostream classes" and "wide-oriented iostream classes" are never used in the standard (except in a somewhat garbled passage that I have rewritten without them), so rather than proliferate definitions of unused terms, I've removed the original culprits.  
UK 150
[199]
17.3   The addition of move semantics to the language means that many library APIs leave an object in a safely-destructible state, where no other operations can safely be performed unless it is assigned a new value. Library presentation would be simplified and made more precise if we introduce a term for this state. By analogy with singular iterators suggest the term 'singular object' or 'the object is in a singular state'.   Define 'singular state' such that an object with a singular state can only be assigned to or safely destroyed. Assiging a new value typically removes the singular state. Note that objects with a singular state may not be safely copied, so you cannot put an object into a singular state by copying another object in a singular state. Use this new term in the postcondition of all library APIs that move from an rvalue reference. It might also be used to simplify the definition of singular iterator to an iterator value with a singular state.   LWG    REJECTED

The requirements tables for move enabled operations have been tightened up without introducing this term (singular state). 
UK 151
[77]
17.3.1   Missing crossreference to 17.3.17 [defns.repositional.stream]   Add cross-reference in the existing empty brackets   editor    ACCEPTED with MODIFICATIONS

Removed the reference.  
UK 152
[80]
17.3.12   Object state is using a definition of object (instance of a class) from outside the standard, rather than the 'region of storage' definiton in 1.8p1   Clarify terms and usage   LWG  1064  REJECTED

This will not affect user or implementer code.  
UK 153
[82]
17.3.17   If a repositional stream can only seek to a position previously encountered, then an arbitrary-positional-stream cannot satisfy this definition, as cross-referenced in 17.3.17   Strike the word 'only'. A note might be added to reinforce the intent   editor    ACCEPTED  
UK 154
[83]
17.3.20   Missing definition of a stable partition algorithm   Add definition from 25.2.12p7   editor    REJECTED

Since the term "stable partition algorithm" is never used, there is no need to define it. The requirements for the algorithm stable_partition are clear as written.  
UK 155
[78]
17.3.3   Add clause 28 to list that use this definition of character   Add clause 28 to list that use this definition of character   editor    ACCEPTED  
UK 156
[79]
17.3.4   Add regular expressions to set of templates using character container type   Add regular expressions to set of templates using character container type   editor    ACCEPTED  
UK 157
[86]
17.5.2.2 ¶ 3   Add concepts to the ordered list of presentation   Add concepts into the sequence   editor   

All concepts-related text has been removed from the draft.  
UK 158
[87]
17.5.2.2 ¶ 3   templates are neither classes nor functions   Replace 'classes' and 'functions' with 'classes and class templates' and 'functions and function templates'   editor    ACCEPTED  
UK 159
[88]
17.5.2.4 ¶ Footnote 152   This informative footnote was relevant in 1998, not 2008. The term 'existing vendors' may imply something different now   Strike the footnote, or replace 'existing' with 'original' or similar   editor    ACCEPTED  
UK 160
[89]
17.5.2.4 ¶ 3   requires is now a keyword with a specific meaning related to concepts, and its use in library specifcation may be confusing. Generally the Requires clause is used to make requirements on the caller, not the library, so typically providing runtime pre-conditions. Suggest a new name to refflect that. Note that Clause 30 already seems to be written to this convention.   Replace 'Requires' with 'Preconditions'   editor    REJECTED

requires is no longer a keyword, so its use as a description of semantics is appropriate.  
UK 161
[90]
17.5.2.4 ¶ 4   This paragraph is redundant as the definition of the term 'handler function' is already provided in 17.3. Are we in danger of proving two definitions of the same terms? Which is the 'controlling' definition?   Strike 17.5.2.4p4   editor    REJECTED

17.3 defines "handler function"; 17.5.2.4/4 imposes requirements on handler functions and replacement functions. There is no redundancy.  
UK 162
[170]
17.5.2.4 ¶ 3   Clause 30 makes use of a 'Synchronization' semantic element, that frequently appears either between Effects: and Postconditions:, or between Returns: and Throws:   Add 'Synchronization' to the list either between Effects: and Postconditions:, or between Returns: and Throws:.   editor    ACCEPTED  
UK 163
[219]
17.5.2.4 ¶ 3   Many functions are defined as "Effects: Equivalent to a...", which seems to also define the preconditions, effects, etc. But this is not made clear.   Introduce an explicit "Equivalent to", which defines all of the properties of the function.   LWG  997  ACCEPTED  
UK 164
[91]
17.5.3.2.1 ¶ 1   This phrasing predates concepts. While this kind of description is still used, the examples provided are now all concepts, and should be replaced with appropriate examples   Use better names for the examples. Ideally totally replace the need by constraining all templates in library, so that real concepts are all that is needed. Note if retained that CopyConstructible is mis-spelled.   editor    ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 165
[92]
17.5.3.2.2, 17.5.3.2.3   constraints on bitmask and enumation types were supposed to be tightened up as part of the motivation for the constexpr feature - see paper n2235 for deails   Adopt wording in line with the motivation described in N2235   LWG  1156  REJECTED

NB did not sufficiently describe how to resolve their comment, and therefore we cannot make a change for the FCD. If a resolution were provided in the future, we would be happy to apply it.  
UK 166
[93]
17.5.3.2.4.1, 17.5.3.3   List of library clauses should go up to 30, not 27   Replace initial refernce to ch27 with ch30   editor    ACCEPTED  
UK 167
[246]
17.5.3.4 Private members   Comment marker in wrong place.   Change: // streambuf* sb; exposition only to streambuf* sb; // exposition only To reflect actual usage.   editor    ACCEPTED  
UK 168
[406]
17.6.2.2 ¶ 2   We should make it clear (either by note or normatively) that namespace std may contain inline namespaces, and that entities specified to be defined in std may in fact be defined in one of these inline namespaces. (If we're going to use them for versioning, eg when TR2 comes along, we're going to need that.)   Replace "namespace std or namespaces nested within namespace std" with "namespace std or namespaces nested within namespace std or inline namespaces nested directly or indirectly within namespace std"   LWG  1065  ACCEPTED with MODIFICATIONS  
UK 169
[95]
17.6.2.2   This phrasing contradicts later freedom to implement the C standard library portions in the global namespace as well as std. (17.6.2.3p4)   Resolve conflict in either place   LWG  992  REJECTED  
UK 170
[96]
17.6.2.3   One of goals of C++0x is to make language easier to teach and for 'incidental' programmers. The fine-grained headers of the C++ library are valuable in large scale systems for managing dependencies and optimising build times, but overcomplicated for simple development and tutorials. Add additional headers to support the whole library through a single include statement.   Add a new header <std> that has the effect of including everything in tables 13 and 14, except <iosfwd> and <cassert>. Add an additional header <fwd> that adds all declarations from <std> but no definitions.   LWG  1002  REJECTED

No consensus for change.  
UK 171
[98]
17.6.2.4 ¶ 3   Does freestanding implementation require a full implementation of all listed headers? The reference to abort, at_exit and exit is confusing. Is a conforming implementation allow to deliver partial forms of these headers? If so which ones? Are empty versions of everything but <cstdlib> conforming?   Either strike the references to abort, at_exit and exit, or clarify which headers only require partial support.   editor    ACCEPTED  
UK 172
[99]
17.6.2.4 ¶ 3   No reference to new functions quick_exit and at_quick_exit   Add reference to quick_exit and at_quick_exit   LWG  1264  ACCEPTED with MODIFICATIONS

We do not belive at_exit and at_quick_exit should be required by freestanding implementations.  
UK 173
[450]
17.6.2.4 ¶ table 15   <initializer_list> is missing from headers required in freestanding implementations.   Add 18.8, initializer lists, <initializer_list>, to the end of the table.   LWG  Doc  ACCEPTED  
JP 23 17.6.2.4 ¶ 2nd para, Table 15   There is a freestanding implementation including <type_traits>, <array>, <ratio>, lately added to Table 13, C++ library headers. Programmers think them useful and hope that these headers are also added to Table 15, C++ headers for freestanding implementations, that shows the set of headers which a freestanding implementation shall include at least.   Add <type_traits>, <array>, <ration> to Table 15.   LWG  1003  ACCEPTED with MODIFICATIONS

See Martin Tasker's paper Fixing Freestanding which provides the wording to include <type_traits> into freestanding implementations.  
UK 174
[100]
17.6.3.2 ¶ 3   The phrasing is mildly ambiguous when using the word 'it' to refer back to the header - an unfotunate reading might confuse it with the translate unit, which is the subject of the surrounding clause.   Replace 'the first reference to any of the entities declared in that header by the translation unit' with 'the first reference to any of the entities that header declares in the translation unit'   editor    ACCEPTED  
UK 175
[101]
17.6.4.2.1 ¶ 2   Local types can now be used to instantiate templates, but don't have external linkage   Remove the reference to external linkage   LWG  1157  ACCEPTED with MODIFICATIONS  
UK 176
[102]
17.6.4.3.3 ¶ Footnote 175   Reference to namespace ::std should be 17.6.4.2   Change referfence from 17.6.4.3 to 17.6.4.2   editor    ACCEPTED with MODIFICATIONS

Removed footnote.  
UK 177
[103]
17.6.4.3.4 ¶ 3   Sentence is redundant as double underscores are reserved in all contexts by 17.6.4.3.3   Strike the sentence   editor    ACCEPTED  
UK 178
[104]
17.6.4.8 ¶ 2   The last sentence of the third bullet "Operations on such types can report a failure by throwing an exception unless otherwise specified" is redundant as behaviour is already undefined.   Strike the sentence   editor    REJECTED

The sentence is not redundant. It points out that the behavior is sometimes circumscribed by a prohibition on throwing exceptions.  
UK 179
[105]
17.6.4.8 ¶ 2   According to the 4th bullet there is a problem if "if any replacement function or handler function or destructor operation throws an exception". There should be no problem throwing exceptions so long as they are caught within the function.   Replace the word 'throws' with 'propogates'   LWG  1004  ACCEPTED with MODIFICATIONS

Replace "propagates" in the proposed resolution with the phrase "exits via".  
JP 22 17.6.5.7 ¶ 4th para, 1st line   The statement below describes relation among two or more threads using words “between threads”: [Note: This means, for example, that implementations can’t use a static object for internal purposes without synchronization because it could cause a data race even in programs that do not explicitly share objects between threads. —end note ]

In such case, “among” is preferred instead of “between”.  
Change "between threads" to "among threads".

There are same cases in 17.6.1 paragraph 2, 17.6.5.7 paragraph 6, 30.1 paragraph 1, 30.3.1 paragraph 1 also.  
editor    REJECTED

"Between" expresses one-to-one relations of pairs in a group; "among" refers to collective relations in a group. "Between" is correct here.  
UK 180
[107]
17.6.5.10 ¶ 1, 4   It should not be possible to strengthen the exception specification for virtual functions as this could break user code. Note this is not a problem in practice as there are no virtual functions with exception specifications in the current library, other than empty throw specifications which it is not possible to strengthen.   Add restriction that exception specification of virtual functions cannot be tightened.   LWG    REJECTED

The standard already has the desired restriction.  
UK 181
[108]
17.6.5.10 ¶ Footnote 186   This footnote is wrong. C library functions do not have any exception specification, but might be treated as if they had an empty throw specification   Clarify that this note does not mean the functions are genuinely declared with the specification, but are treated as-if.   editor    ACCEPTED  
UK 182
[109]
17.6.5.10 ¶ Footnote 188   It is very helpful to assume all exceptions thrown by the standard library derive from std::exception. The 'encouragement' of this note should be made normative.   Make this footnote normative   LWG    REJECTED

The standard library cannot mandate all standard-library functions that might use some third-party library.  
UK 184
[144]
18 -> 30   The new alias-declaration syntax is generally easier to read than a typedef declaration. This is especially true for complex types like function pointers.   Replace all typedef declarations in the standard library with alias-declarations, except in the standard C library.   editor    REJECTED

typedef is still a valid concept.  
JP 24 18 ¶ 2nd para, Table 16   Subclauses are listed in Table 16 as:

"18.6 Type identification …"

"18.8 Initializer lists …"

"18.7 Exception handling …".  
Sort them in the increasing order "18.6 Type identification …"

"18.7 Exception handling …".

"18.8 Initializer lists …"  
editor    ACCEPTED  
JP 25 18.1 ¶ 6th para , last line, SEE ALSO   max_align_t is described in 18.1, so add 3.11 Alignment as the reference.   Add "3.11, Alignment" to SEE ALSO.   editor    ACCEPTED  
FR 32 18.2.1 [Numeric limits]   The definition of numeric_limits<> as requiring a regular type is both conceptually wrong and operationally illogical. As we pointed before, this mistake needs to be corrected. For example, the template can be left unconstrained. In fact this reflects a much more general problem with concept_maps/axioms and their interpretations. It appears that the current text heavily leans toward experimental academic type theory.   We suggest that a more pragmatic approach, in the spirit of C and C++, be taken so that calls to constrained function templates are interpreted as assertions on *values*, not necessarily semantics assertions on the carrier type.   LWG  902  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
DE 16 18.2.1   DE-16 The class template numeric_limits should not specify the Regular concept requirement for its template parameter, because it contains functions returning NaN values for floating-point types; these values violate the semantics of EqualityComparable. See also library issue 902 in WG21 document N2794 "C++ Standard Library Active Issues List (Revision R60)", available at http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2794.html .   Specify a concept requirement with fewer constraints as appropriate, for example SemiRegular.   LWG  902  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
JP 26 18.2.1.1   numeric_limits does not use concept.   Correct as follows.

template<class T> class numeric_limits<const T>;
template<class T> class numeric_limits<volatile T>;
template<class T> class numeric_limits<const volatile T>;

should be

template<Regular T> class numeric_limits<const T>;
template<Regular T> class numeric_limits<volatile T>;
template<Regular T> class numeric_limits<const volatile T>;  
LWG  1005  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
DE 17 18.2.6   DE-17 The class type_index should be removed; it provides no additional functionality beyond providing appropriate concept maps.   Specify concept maps for "const type_info *" as required by the ordered and unordered containers and remove the class type_index.   LWG  1078  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 185
[264]
18.3.1 ¶ 2   There is no header <stdint>, it should either be <stdint.h> or <cstdint>   Replace <stdint> with <cstdint>   editor    ACCEPTED  
DE 18 18.4   DE-18 The proposed C++ standard makes a considerable number of existing programs that have well-defined behavior according to ISO/IEC 14882:2003 have undefined behavior without a diagnostic hint to the programmer at all. This applies to the presence of threads and to pointer safety (the latter was introduced to support garbage collection). In order to avoid requiring a full code review for user code, facilities should be present that allow the compile-time detection of the advanced features of the proposed C++ standard. It is expected that C++ implementations will provide a means (for example, a command-line switch) to turn off either or both of threads and garbage collection support, turning potentially undefined programs into well-defined ones. Note: This issue is contributing significantly to Germany's overall “no” vote.   Consider applying the changes proposed in WG21 document N2693 "Requirements on programs and backwards compatibility", available at http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2693.html .   LWG  1097,1098   ACCEPTED with MODIFICATIONS  
UK 186
[265]
18.4 ¶ Footnote 221   What is the purpose of this comment? The standard stream objects (cin, cerr etc.) have a peculiar lifetime that extends beyond the program. They may never be destroyed so will not be responsible for flushing buffers at the stated time.   Remove the footnote   editor    ACCEPTED  
UK 187
[266]
18.4 ¶ 9   The term "thread safe" is not defined nor used in this context anywhere else in the standard.   Clarify the intended meaing of "thread safe"   LWG  1144  ACCEPTED with MODIFICATIONS  
UK 188
[267]
18.4 ¶ 12   The function _Exit does not appear to be defined in this standard. Should it be added to the table of functions included-by-reference to the C standard?   Depends on where _Exit comes from   LWG  993  ACCEPTED  
UK 189
[273]
18.4, 18.7   The addition of the [[noreturn]] attribute to the language will be an important aid for static analysis tools.   The following functions should be declared in C++ with the [[noreturn]] attribute: abort exit quick_exit terminate unexpected rethrow_exception throw_with_nested   LWG  1066  ACCEPTED with MODIFICATIONS  
JP 27 18.4, 18.9, 18.7.2.2, 18.7.3.1   There are Standard library functions that never return to the caller. They are explained so in the Standard but not declared explicitly.   Consider to add the attribute [[noreturn]] to such functions,



15.5.2 unexpected 18.4: abort(), exit(), quick_exit, 18.7.2.2: unexpected_handler, 18.7.3.1: terminate_handler,

18.7.6 rethrow_nested

18.7.6 throw_with_nested 18.9: longjmp.  
LWG  1066  ACCEPTED  
UK 190
[268]
18.5.1 ¶ various   It is not entirely clear how the current specification acts in the presence of a garbage collected implementation.   All deallocation functions taking a pointer parameter should have a Precondition : ptr is a safely-derived pointer value.   LWG  1006  ACCEPTED  
UK 191
[271]
18.5.1.1 ¶ 4   According to the second bullet, behaviour becomes undefined (for lack of a specification) if the user has not yet called set_new_handler.   Rephrase the second bullet in terms of a new handler being installed, and update any definition of handler function necessary to be sure the term 'installed' is defined.   editor    ACCEPTED with MODIFICATIONS

Reworded, but not with "installed".  
UK 192
[269]
18.5.1.2   The declared signature is not compatible with the current requirement to throw std::length_error. It is too late to weaken the exception specification, so the only other change is to preserve new (improved) behaviour is to throw std::bad_alloc, or something derived from std::bad_alloc.   Fix 5.3.4p7 by required std::bad_alloc rather than std::length_error   CWG  805  ACCEPTED

See paper N2932 
UK 193
[272]
18.5.2.2 ¶ 2   quick_exit has been added as a new valid way to terminate a program in a well defined way   Change 3rd bullet: call either abort(), exit() or quick_exit();   LWG  994  ACCEPTED with MODIFICATIONS  
UK 194
[443]
18.6   The inclusion of type_index and hash<type_index> in <typeinfo> brings dependencies into <typeinfo> which are inconsistent with the definition of freestanding C++ in 17.6.2.4.   Move type_index and hash<type_index> out of <typeinfo> and into a new header, <typeindex>.   LWG  Doc  ACCEPTED  
JP 28 18.6, 18.7, 19.1   Errors reported by Exception classes are of types char or std::string only. For example, std::exception is declared with char, std::string types, therefore types wchar_t/wstring, char16_t/u16string, or char32_t/u32string can not be used.   Consider other types.   LWG    REJECTED

There is already guidance in the CD. It is the caller's responsibility to internationalize MB character string.  
JP 29 18.7.6   throw_with_nested does not use concept.   Correct as follows.

template<class T> void throw_with_nested(T&& t); // [[noreturn]]



should be



template<CopyConstructible T> void throw_with_nested(T&& t); // [[noreturn]]  
LWG  1007  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
JP 30 18.7.6   To handle nested exceptions strictly, error information of tree structure will be required though, the nested_exception does not support tree structure. It is insufficient as error handling.   Consider nested_exception to support tree structure.   LWG  1132  REJECTED

The committee agrees that nested_exception is not a good match for this usage model. The committee did not see a way of improving this within the timeframe allowed.  
JP 31 18.7.6   It is difficult to understand in which case nested_exception is applied.   Consider to add a sample program which rethrows exception.   LWG  1008  REJECTED

nested_exception is intended to be inherited from by exception classes that are to be thrown during the handling of another exception, i.e. when translating from one exception type to another. nested_exception allows the originally thrown exception to be easily retained in that scenario.  
UK 195
[451]
18.8   The class definition of std::initializer_list contains concept-maps to Range which should be out of the class, and in <iterator_concepts> instead. Otherwise, it's not possible to use initializer_lists in a freestanding C++ implementation.   Delete the two concept maps from std::initializer_list.   LWG  Doc  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 196
[452]
18.8.3   Concept maps for initializer_list to Range should not be in language support headers, but instead in iterator concepts.   Remove section 18.8.3 and put it in 24.1.8.1 instead, so that the concept_maps from initializer_list to Range are specified under Range instead of under initializer lists; also, so that they're implemented in <iterator_concepts> instead of <initializer_list>.   LWG  Doc  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 197
[275]
19   All the exception classes in this clause take a std::string argument by const reference. They should all be overloaded to accept std::string by rvalue rerefence for an efficient move as well.   Provide a constructor for every exception class in clause 19 accepting a std::string by rvalue reference, with the semantics that the passed string may be moved.   LWG    REJECTED

Implementations are permitted to add the requested signature under the as-if rule. See clause 17.  
JP 32 19.1   Messages returned by the member function what() of standard exception classes seem difficult to judge.

For example, following messages are returned by what() of std::bad_alloc of existing implementations:



Compiler: Message returned by what()

---------------------------------------------

Borland C++ 5.6.4: no named exception thrown

Visual C++ 8.0: bad allocation

Code Warrior 8.0: exception

g++ 3.4.4: St9exception



It is difficult to recognize what exception was thrown when using those compilers except Visual C++.  
Consider to add footnote that recommends what() returns message easy to recognize what exception was thrown.   LWG    REJECTED

This is a quality of implementation issue that is beyond the scope of the standard.  
US 64 19.3 ¶ 1   See also: ISO C 7.1.4, 7.2, Amendment 1 4.3.” It is unclear why this cross reference is here. Amendment 1 was to C89, not C99.   Delete this cross reference. If necessary, expand the main text to include the relevant referenced text   editor    ACCEPTED  
US 65 20   Scoped allocators and allocator propagation traits add a small amount of utility at the cost of a great deal of machinery. The machinery is user visible, and it extends to library components that don't have any obvious connection to allocators, including basic concepts and simple components like pair and tuple.   Sketch of proposed resolution: Eliminate scoped allocators, replace allocator propagation traits with a simple uniform rule (e.g. always propagate on copy and move), remove all mention of allocators from components that don't explicitly allocate memory (e.g. pair), and adjust container interfaces to reflect this simplification.

Components that I propose eliminating include HasAllocatorType ?, is_scoped_allocator, allocator_propagation_map, scoped_allocator_adaptor, and ConstructibleAsElement ?.  
LWG  1075  ACCEPTED with MODIFICATIONS

Scoped allocators have been revised significantly.  
UK 198
[126]
20   The organization of clause 20 could be improved to better group related items, making the standard easier to navigate.   20.6.7, 20.6.8, 20.6.9 and 20.6.10 should be grouped under a section called "operator wrappers" or similar. The goal of all 4 subsections combined is to provide a functor for every operator in the language. 20.6.17 class template hash should numerically appear immediately after the operator wrappers, as they are functors that are used in similar ways 20.6.11, 20.6.12, 20.6.13, 20.6.14, 20.6.15 are strongly related to 20.6.3, and to an extent 20.6.2. These should all come under a subheading of "function adapters" 20.7.1, 20.7.3, 20.7.4, 20.7.5, 20.7.6, 20.7.7 and 20.7.10 should all be grouped as subclauses under [20.7.2 Allocators] [20.7.12 unique_ptr] should be a sub-section of [20.7.13 smart pointers] [20.7.13 smart pointers] is important enough to have a high level bullet after [20.7 memory], suggest renumbering as [20.8 smart pointers] [20.7.13.7 Pointer safety] is nothing to do with smart pointers and should become its own subclause [20.7.14 Pointer safety] [20.9 date and time functions] should be moved under [20.8 time utilities] and retitled [20.8.6 C Library] (as per memory management/C Library) [20.6.18 reference_closure] is fundamentally a language support feature and should move to clause 18, see separate comment [20.6.5 reference_wrapper] should be simplified and moved into [2.2 utility components], see separate comment [20.6.4 result_of] should be reorganised as a type trait - see separate comment Tuples and pairs are closely related so merge tuple and pair into the same subclause - see more general comment on this   editor    ACCEPTED  
UK 199
[127]
20.1.1, 20.1.2 ¶ 2   The requirement that programs do not supply concept_maps should probably be users do not supply their own concept_map specializations. THe program will almost certainly supply concept_maps - the standard itself supplies a specialization for RvalueOf? references. Note that the term _program_ is defined in 3.5p1 and makes no account of the standard library being treated differently to user written code.   Replace the term 'program' with 'user'.   LWG  1015  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 200
[354]
20.1.4   All standard library use expects Predicates to be CopyConstructible, and this should be recognised easily without reatedly stating on every use-case.   Either require CopyConstructible<F> as part of Predicate, or create a refined concept, StdPredicate, used throughout the library that requires CopyConstructible as well as Callable. Consider making (Std)Predicate SemiRegular.   LWG    REJECTED

After further discussion of UK200, we do not think adding constraints to predicates is a good idea. Straw poll on UK200: status quo, 5 pro - 2 con; remove copy-constructible, 3 pro - 4 con; pred must be copy-constructible, 4 pro - 3 con; no consensus for moving away from the status quo.

Also see UK245.  
UK 201
[290]
20.1.5   The Consistency axiom for LessThanComparable will not compile.   Add a requires clause to the Consistency axiomL requires HasLessEquals<T> && HasGreaterEquals<T>, or split the Consistency axiom into two so that 'basic' consistency can be asserted regardless of the <=/>= requirement.   LWG    REJECTED

After consultation with the submitter, we agreed that the suggestion was in error and there is nothing else to be done.  
JP 33 20.1.5   LessThanComparable and EqualityComparable don't correspond to NaN.   Apply concept_map to these concepts at FloatingPointType   LWG  1016  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
US 66 20.1.10   Application of the "Regular" concept to floating-point types appears to be controversial (see long discussion on std-lib reflector).   State that the “Regular” concept does not apply to floating-point types.   LWG  1017  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
JP 34 20.2 ¶ 1st para, 4th line   Though N2672 pointed at adding "#include<initializer_list>", it isn't reflected.   add followings

#include <initializer_list> // for concept_map  
editor    ACCEPTED  
US 67 20.2.1 ¶ 5 first sent.   Some connective words are missing.   Insert “corresponding to” before “an lvalue reference type.”   editor    ACCEPTED with MODIFICATIONS  
JP 35 20.2.3 ¶ 6th para, 1st line   Typo,

"stdforward" should be "std::forward"  
Correct typo.   editor    ACCEPTED  
UK 202
[213]
20.2.4   The references to pair in the tuple-like access to pair functions qualify pair with std::pair even though they are in a namespace std block.   Remove the std:: qualification from these references to pair.   editor    ACCEPTED  
US 68 20.2.12 ¶ IntegralLike   The code defining the context is syntactically incorrect.   Insert a comma in two places: at the end of the third line of refinements, and at the end of the fourth line of refinements.   editor    ACCEPTED

Section reference should be 20.1.12.  
UK 203
[229]
20.3.2 ¶ 1-4   The ratio_xyz types have a misplaced '}'. For example: template <class R1, class R2> struct ratio_add { typedef see below} type; ;   Move the '}' to after the typedef: template <class R1, class R2> struct ratio_add { typedef see below type; };   editor    ACCEPTED  
JP 36 20.4.2.1 ¶ 19th para, 6th line   Typo.

"it it" should be "it is"  
Correct typo.   editor    ACCEPTED  
UK 204
[239]
20.5 ¶ Table 41   It is not possible to create a variant union based on a parameter pack expansion, e.g. to implement a classic discriminated union template.   Restore aligned_union template that was removed by LWG issue 856.   LWG  1020  REJECTED

Section reference should be 20.5.7 instead of 20.5. Paper N2843 proposes an extension to the [[align]] attribute that further diminishes the need for this template.  
US 69 20.5   This section, dealing with tuple<>, should be in the same section as the similar utility pair<>.   Restructure Clause 20 so as to bring these similar components together.   editor    ACCEPTED with MODIFICATIONS

The library part of the standard is organized by headers. These two are in different headers, so can't be brought together. However, they're closer now.  
UK 205
[253]
20.5.3   integral_constant objects should be usable in integral-constant-expressions. The addition to the language of literal types and the enhanced rules for constant expressions make this possible.   Add a constexpr conversion operator to class tempalate integral_constant: constexpr operator value_type() { return value; }   LWG  1019  ACCEPTED  
UK 206
[255]
20.5.5 ¶ para 4   Currently the std says: "In order to instantiate the template is_convertible<From, To>, the following code shall be well formed:" But the code shown is the requirement for the result of is_convertible to be a true_type, not a precondition on whether the template can be instantiated.   Change: "In order to instantiate the template is_convertible<From, To>, the following code shall be well formed:" To: "The template is_convertible<From, To> inherits either directly or indirectly from true_type if the following code is well formed:"   LWG  975  ACCEPTED with MODIFICATIONS  
UK 207
[256]
20.5.6.1 ¶ Table 36   suffix "::type" is missing from the some of the examples.   Change: Example:remove_const<const volatile int>::type evaluates to volatile int, whereas remove_const<const int*> is const int*. —end example To: Example:remove_const<const volatile int>::type evaluates to volatile int, whereas remove_const<const int*>::type is const int*. —end example And change: Example:remove_volatile<const volatile int>::type evaluates to const int, whereas remove_volatile<volatile int*> is volatile int*. —end example To: Example:remove_volatile<const volatile int>::type evaluates to const int, whereas remove_volatile<volatile int*>::type is volatile int*. —end example And change: Example:remove_cv<const volatile int>::type evaluates to int, whereas remove_cv<const volatile int*> is const volatile int*. —end example To: Example:remove_cv<const volatile int>::type evaluates to int, whereas remove_cv<const volatile int*>::type is const volatile int*. —end example   editor    ACCEPTED  
JP 37 20.5.7 ¶ Table 41   Typo.

There isn't a period at the end of enable_if's comments.



If B is true, the member typedef type shall equal T; otherwise, there shall be no member typedef type



should be



If B is true, the member typedef type shall equal T; otherwise, there shall be no member typedef type.  
Add ”.”   editor    ACCEPTED  
US 70 20.6   Specifications now expressed via narrative text are more accurately and clearly expressed via executable code.   Wherever concepts are available that directly match this section’s type traits, express the traits in terms of the concepts instead of via narrative text. Where the type traits do not quite match the corresponding concepts, bring the two into alignment so as to avoid two nearly-identical notions.   LWG  1018  ACCEPTED with MODIFICATIONS

Section reference should be 20.5 instead of 20.6. All concepts-related text has been removed from the draft.  
US 71 20.6.7 ¶ Table 51, last row, column 3   The grammar is incorrect.   Change “conversion are” to “conversion is”.   editor    ACCEPTED with MODIFICATIONS

"conversions are" is correct.  
JP 38 20.6.12.1.3   add the move requirement for bind's return type.

For example, assume following th1 and th2,

void f(vector<int> v) { } vector<int> v{ ... }; thread th1([v]{ f(v); }); thread th2(bind(f, v)); When function object are set to thread, v is moved to th1's lambda expression in a Move Constructor of lambda expression becuase th1's lambda expression has a Move Constructor. But bind of th2's return type doesn't have the requirement of Move, so it may not moved but copied.

Add the requirement of move to get rid of this useless copy.

And also, add the MoveConstructible as well as CopyConstructible.  
Add the following requirements. "it has a public move constructor that performs a member-wise move."

Add the MoveConstructible.  
LWG  817  ACCEPTED with MODIFICATIONS  
JP 39 20.6.16.2   There are no requires corresponding to F of std::function.   Correct as follows.

template<class F, Allocator A> function(allocator_arg_t, const A&, F);
template<class F, Allocator A> function(allocator_arg_t, const A&, F&&);

should be

template<class F, Allocator A>
requires CopyConstructible<F> && Callable<F, ArgTypes...>
&& Convertible<Callable<F, ArgTypes...>::result_type, R>
function(allocator_arg_t, const A&, F);
template<class F, Allocator A>
requires CopyConstructible<F> && Callable<F, ArgTypes...>
&& Convertible<Callable<F, ArgTypes...>::result_type, R>
function(allocator_arg_t, const A&, F&&);  
LWG  1024  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
JP 40 20.6.16.2   Thougn it's "Allocator Aloc" at other places, it's "Allocator A" only std::function constructor template parameter.   Correct as follows.

template<class F, Allocator A> function(allocator_arg_t, const A&, F);

template<class F, Allocator A> function(allocator_arg_t, const A&, F&&);



should be



template<class F, Allocator Alloc> function(allocator_arg_t, const Alloc &, F);

template<class F, Allocator Alloc> function(allocator_arg_t, const Alloc &, F&&);  
editor    ACCEPTED  
JP 41 20.6.16.2   There are no requires corresponding to R and Args of UsesAllocator.   Correct as follows.

template <class R, class... Args>
concept_map UsesAllocator<function<R(Args...)>, Alloc> {
typedef Alloc allocator_type;
}

should be

template <Returnable R, CopyConstructible... Args>
concept_map UsesAllocator<function<R(Args...)>, Alloc> {
typedef Alloc allocator_type;
}  
LWG    REJECTED

This change would be redundant because function<> is already sufficiently constrained. No actions necessary.  
JP 42 20.6.16.2   The requires are wrong.

R require Returnable, and ArgTypes requires CopyConstructible by a definition of function, then it's a mistake to designate followings by MoveConstructible.  
Correct as follows.

template <MoveConstructible R, MoveConstructible... ArgTypes>
bool operator==(const function<R(ArgTypes...)>&, nullptr_t);
template <MoveConstructible R, MoveConstructible... ArgTypes>
bool operator==(nullptr_t, const function<R(ArgTypes...)>&);
template <MoveConstructible R, MoveConstructible... ArgTypes>
bool operator!=(const function<R(ArgTypes...)>&, nullptr_t);
template <MoveConstructible R, MoveConstructible... ArgTypes>
bool operator!=(nullptr_t, const function<R(ArgTypes...)>&);
template <MoveConstructible R, MoveConstructible... ArgTypes>
void swap(function<R(ArgTypes...)>&, function<R(ArgTypes...)>&);

should be

template <Returnable R, CopyConstructible... ArgTypes>
bool operator==(const function<R(ArgTypes...)>&, nullptr_t);
template <Returnable R, CopyConstructible... ArgTypes>
bool operator==(nullptr_t, const function<R(ArgTypes...)>&);
template <Returnable R, CopyConstructible... ArgTypes>
bool operator!=(const function<R(ArgTypes...)>&, nullptr_t);
template <Returnable R, CopyConstructible... ArgTypes>
bool operator!=(nullptr_t, const function<R(ArgTypes...)>&);
template <Returnable R, CopyConstructible... ArgTypes>
void swap(function<R(ArgTypes...)>&, function<R(ArgTypes...)>&);  
editor    ACCEPTED  
UK 208
[338]
20.6.17 ¶ 1   std::hash should be implemented for much more of the standard library. In particular for pair, tuple and all the standard containers.   .   LWG  978  ACCEPTED with MODIFICATIONS  
UK 209
[111]
20.7   Smart pointers cannot be used in constrained templates   Provide constraints for smart pointers   LWG  1026  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 213
[357]
20.7.6   std::allocator should be constrained to simplify its use on constrained contexts. This library component models allocation from free store via the new operator so choose constraints to match. The Allocator concept allows for a wider variety of allocators that users may choose to supply if their allocation model does not require operator new, without impacting the requirements of this template.   The primary allocator template should be constrained to require ObjectType<T> and FreeStoreAllocatable<T>. Further operations to be constrained as required.   LWG  1027  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 214
[125]
20.7.8   raw_storage_iterator needs constraining as an iterator adaptor to be safely used in constrained templates   Constrain the raw_storage_iterator template   LWG  1028  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 210
[124]
20.7.11   Specialized algorithms for memory managenment need requirements to be easily usable in constrained templates   Provide constraints for all algorithms in 20.7.11   LWG  1029  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
DE 20 20.7.12   DE-20 The section heading and the first sentence use the term "template function", which is undefined.   Replace "template function" by "function template".   editor    ACCEPTED

Section reference should be 20.6.12 instead of 20.7.12.  
US 72 20.7.12   bind should support move-only functors and bound arguments.     LWG  817  ACCEPTED with MODIFICATIONS

Section reference should be 20.6.12.1.3 instead of 20.7.12.  
DE 21 20.7.12.1.3   DE-21 The specification for bind claims twice that "the values and types for the bound arguments v1, v2, ..., vN are determined as specified below". No such specification appears to exist.   Add the missing specification in the same section, or add a cross-reference indicating the section where the specification appears.   LWG  817  ACCEPTED with MODIFICATIONS

Section reference should be 20.6.12.1.3 instead of 20.7.12.1.3.  
UK 211
[428]
20.7.12.2.3 ¶ 11   The nullptr_t type was introduced to resolve the null pointer literal problem. It should be used for the assignemnt operator, as with the constructor and elsewhere through the library.   Change signature here and in the synopsis to: unique_ptr& operator=(nullptr_t); Strike the sentance an note before the Effects clause.   LWG  1021  ACCEPTED

Section reference should be 20.6.12.2.3 instead of 20.7.12.2.3.  
UK 212
[270]
20.7.13.7   The pointer-safety API is nothing to do with smart pointers, so does not belong in 20.7.13. In fact it is a set of language support features are really belongs in clause 18, with the contents declared in a header that deals with language-support of memory management.   Move this specification to 18.5. Move the declarations into the header <new>.   editor    ACCEPTED with MODIFICATIONS

Section reference should be 20.6.13.7 instead of 20.7.13.7.  
DE 22 20.7.16.2   DE-22 The conditions for deriving from std::unary_function and std::binary_function are unclear: The condition would also be satisfied if ArgTypes were std::vector<T1>, because it (arguably) "contains" T1.   Consider stating the conditions in normative prose instead of in comments in the class definition. Use "consists of" instead of "contains". Consider using "if and only if" instead of "iff".   LWG  1023  ACCEPTED

Section reference should be 20.6.16.2 instead of 20.7.16.2.  
US 73 20.7.18   The std::reference_closure template is redundant with std::function and should be removed.



std::reference_closure is a premature optimization that provides a limited subset of the functionality of std::function intended to improve performance in a narrow use case. However, the “parallel application performance” benchmark used to motivate the inclusion of std::reference_closure was flawed in several ways:


  1. it failed to enable a common optimization in std::function (implemented by all vendors), exacting a large and unrealistic penalty for copying std::function instances, and


  2. it failed to account for parallel scheduler overhead or realistically-sized work units, both of which would dominate the costs measured by the benchmark in any realistic application.
 
Remove 20.7.18 [func.referenceclosure].



Remove 5.1.1 paragraph 12.  
CWG  750  ACCEPTED

Section reference should be 20.6.18 instead of 20.7.18.

See paper N2845 
US 74.1 20.8   Scoped allocators represent a poor trade-off for standardization, since (1) scoped-allocator--aware containers can be implemented outside the C++ standard library but used with its algorithms, (2) scoped allocators only benefit a tiny proportion of the C++ community (since few C++ programmers even use today’s allocators), and (3) all C++ users, especially the vast majority of the C++ community that won’t ever use scoped allocators are forced to cope with the interface complexity introduced by scoped allocators. In essence, the larger community will suffer to support a very small subset of the community who can already implement their own data structures outside of the standard library. Therefore, scoped allocators should be removed from the working paper.

Some evidence of the complexity introduced by scoped allocators:

20.3.3, 20.5: large increase in the number of pair and tuple constructors

23: confusing “AllocatableElement” requirements throughout.  
Remove support for scoped allocators from the working paper. This includes at least the following changes:



Remove 20.8.3 [allocator.element.concepts]



Remove 20.8.7 [allocator.adaptor]



Remove 20.8.10 [construct.element]



In Clause 23: replace requirements naming the AllocatableElement concept with requirements naming CopyConstructible, MoveConstructible, DefaultConstructible, or Constructible, as appropriate.  
LWG  1075  ACCEPTED with MODIFICATIONS

Scoped allocators have been revised significantly.  
US 74.2 20.8.2.2 ¶ (a) synopsis (b) after ¶ 14   A concept name is twice misspelled.   Change “Hasconstructor” to “HasConstructor” (twice).   editor    ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft. (The text in question is in 20.7.2.2, not 20.8.2.2.)  
US 75 20.8.2.2   Allocator concepts are incomplete   See paper: http://www.halpernwightsoftware.com/WG21/n2810_allocator_defects.pdf   LWG  Doc  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.

See paper N2840 
JP 43 20.8.3   Typo.

"alloc" should be "Alloc"  
Correct as follows.



auto concept UsesAllocator<typename T, typename Alloc> {

requires Allocator<alloc>;

typename allocator_type = T::allocator_type;



should be



auto concept UsesAllocator<typename T, typename Alloc> {

requires Allocator<Alloc>;

typename allocator_type = T::allocator_type;  
editor    ACCEPTED  
UK 215
[356]
20.8.3.3 ¶ 6,8   Extra pair of {}, presumably some formatting code gone awry : duration& operator-{-}();   Remove the {} or fix formatting   editor    ACCEPTED  
US 77 20.8.4   Allocator-specific move and copy behavior for containers (N2525) complicates a little-used and already-complicated portion of the standard library (allocators), and breaks the conceptual model of move-constructor and move-assignment operations on standard containers being efficient operations. The extensions for allocator-specific move and copy behavior should be removed from the working paper.

With the introduction of rvalue references, we are teaching programmers that moving from a standard container (e.g., a vector<string>) is an efficient, constant-time operation. The introduction of N2525 removed that guarantee; depending on the behavior of four different traits (20.8.4), the complexity of copy and move operations can be constant or linear time. This level of customization greatly increases the complexity of standard containers, and benefits only a tiny fraction of the C++ community.  
Remove 20.8.4.



Remove 20.8.5.



Remove all references to the facilities in 20.8.4 and 20.8.5 from clause 23.  
LWG  1166  ACCEPTED with MODIFICATIONS  
US 78 20.8.12, 20.8.13.2   There is presently no way to convert directly from a shared_ptr to a unique_ptr.   Add an interface that performs the conversion. See the attached, Issues with the C++ Standard" paper under Chapter 20, "Conversion from shared_ptr to unique_ptr".   LWG  1031  REJECTED

There are non-trivial design issues which would need to be implemented and tested in the field for usability prior to standardization.  
US 79 20.8.12.2.1   [unique.ptr.single.ctor]/5 no longer requires for D not to be a pointer type. This restriction needs to be put back in. Otherwise we have a run time failure that could have been caught at compile time:



unique_ptr<int, void(*)(void*)> p(malloc(sizeof(int))); // should not compile



unique_ptr<int, void(*)(void*)> p(malloc(sizeof(int)), free); // ok  
  LWG  932  ACCEPTED with MODIFICATIONS  
JP 44 20.8.13.6   The 1st parameter p and 2nd parameter v is now shared_ptr<T> *.

It should be shared_ptr<T>&, or if these are shared_ptr<T>* then add the "p shall not be a null pointer" at the requires.  
Change shared_ptr<T>& or add the "p shall not be a null pionter" at the requires.   LWG  1030  ACCEPTED with MODIFICATIONS

Section reference should be 20.7.13.6 instead of 20.8.13.6.  
JP 45 20.9   Rep, Period, Clock and Duration don't correspond to concept.

template <class Rep, class Period = ratio<1>> class duration;

template <class Clock, class Duration = typename Clock::duration> class time_point;  
Make concept for Rep, Period, Clock and Duration, and fix 20.9 and wait_until and wait_for's template parameter at 30.   LWG  1032  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
US 80 20.9.2.1 ¶ Heading   The section heading does not describe the contents.   Change the heading “is_floating_point” to “treat_as_floating_point”. Optionally adjust the section’s label similarly.   editor    ACCEPTED with MODIFICATIONS

Section reference should be 20.8.2.1 instead of 20.9.2.1.  
US 81 20.9.3   chrono::duration is missing the modulous operator for both member and non-member arithmetic. This operator is useful for finding the position of a duration within a bounded time frame. Having it be built in to duration is safer than requiring the client to extract and operate directly on the duration’s representation as the latter will not enforce the correct units of the operation.

Ex:

milliseconds ms(...);
microseconds us(...);

ms % us; // microseconds
us % ms; // microseconds
ms % 5; // milliseconds
5 % ms; // does not compile  
Add:

template <class Rep, class Period = ratio<1>>
class duration {
public:
...
duration& operator%(const rep&);
duration& operator%(const duration&);
..
};

template <class Rep1, class Period,
class Rep2>
duration<typename common_type<
Rep1, Rep2>::type, Period>
operator%(const duration<Rep1, Period>& d, const Rep2& s);

template <class Rep1, class Period1,
class Rep2, class Period2>
typename common_type<duration<Rep1, Period1>, duration<Rep2, Period2>>::type
operator%(const duration<Rep1, Period1>& lhs, const duration<Rep2, Period2>& rhs);  
LWG  934  ACCEPTED  
US 82 20.9.5.3 ¶ after ¶ 1   The code synopsis has a minor alignment error.   Align “rep” with the other symbols defined in this synopsis.   editor    ACCEPTED  
UK 216
[282]
21   All the containers use concepts for their iterator usage, exect for basic_string. This needs fixing.   Use concepts for iterator template parameters throughout the chapter.   LWG  1081  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
JP 46 21.2, 21.3   The basic_string does not use concept.   The "class Alloc" is changed to "Allocator Alloc".

The "class InputIterator" is changed to "InputIterator Iter".


// 21.3, basic_string:
template<class charT, class traits = char_traits<charT>,
Allocator Alloc = allocator<charT> >
class basic_string;

template<class charT, class traits, Allocator Alloc>
basic_string<charT,traits,Alloc>
operator+(const basic_string<charT,traits,Alloc>& lhs,
const basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
basic_string<charT,traits,Alloc>&&
operator+(basic_string<charT,traits,Alloc>&& lhs,
const basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
basic_string<charT,traits,Alloc>&&
operator+(const basic_string<charT,traits,Alloc>& lhs,
basic_string<charT,traits,Alloc>&& rhs);

template<class charT, class traits, Allocator Alloc>
basic_string<charT,traits,Alloc>&&
operator+(basic_string<charT,traits,Alloc>&& lhs,
basic_string<charT,traits,Alloc>&& rhs);

template<class charT, class traits, Allocator Alloc>
basic_string<charT,traits,Alloc>
operator+(const charT* lhs,
const basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
basic_string<charT,traits,Alloc>&&
operator+(const charT* lhs,
basic_string<charT,traits,Alloc>&& rhs);

template<class charT, class traits, Allocator Alloc>
basic_string<charT,traits,Alloc>
operator+(charT lhs, const basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
basic_string<charT,traits,Alloc>&&
operator+(charT lhs, basic_string<charT,traits,Alloc>&& rhs);

template<class charT, class traits, Allocator Alloc>
basic_string<charT,traits,Alloc>
operator+(const basic_string<charT,traits,Alloc>& lhs,
const charT* rhs);

template<class charT, class traits, Allocator Alloc>
basic_string<charT,traits,Alloc>&&
operator+(basic_string<charT,traits,Alloc>&& lhs,
const charT* rhs);

template<class charT, class traits, Allocator Alloc>
basic_string<charT,traits,Alloc>
operator+(const basic_string<charT,traits,Alloc>& lhs, charT rhs);

template<class charT, class traits, Allocator Alloc>
basic_string<charT,traits,Alloc>&&
operator+(basic_string<charT,traits,Alloc>&& lhs, charT rhs);

template<class charT, class traits, Allocator Alloc>
bool operator==(const basic_string<charT,traits,Alloc>& lhs,
const basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
bool operator==(const charT* lhs,
const basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
bool operator==(const basic_string<charT,traits,Alloc>& lhs,
const charT* rhs);

template<class charT, class traits, Allocator Alloc>
bool operator!=(const basic_string<charT,traits,Alloc>& lhs,
const basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
bool operator!=(const charT* lhs,
const basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
bool operator!=(const basic_string<charT,traits,Alloc>& lhs,
const charT* rhs);

template<class charT, class traits, Allocator Alloc>
bool operator< (const basic_string<charT,traits,Alloc>& lhs,
const basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
bool operator< (const basic_string<charT,traits,Alloc>& lhs,
const charT* rhs);

template<class charT, class traits, Allocator Alloc>
bool operator< (const charT* lhs,
const basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
bool operator> (const basic_string<charT,traits,Alloc>& lhs,
const basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
bool operator> (const basic_string<charT,traits,Alloc>& lhs,
const charT* rhs);

template<class charT, class traits, Allocator Alloc>
bool operator> (const charT* lhs,
const basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
bool operator<=(const basic_string<charT,traits,Alloc>& lhs,
const basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
bool operator<=(const basic_string<charT,traits,Alloc>& lhs,
const charT* rhs);

template<class charT, class traits, Allocator Alloc>
bool operator<=(const charT* lhs,
const basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
bool operator>=(const basic_string<charT,traits,Alloc>& lhs,
const basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
bool operator>=(const basic_string<charT,traits,Alloc>& lhs,
const charT* rhs);

template<class charT, class traits, Allocator Alloc>
bool operator>=(const charT* lhs,
const basic_string<charT,traits,Alloc>& rhs);

// 21.3.8.8: swap
template<class charT, class traits, Allocator Alloc>
void swap(basic_string<charT,traits,Alloc>& lhs,
basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
void swap(basic_string<charT,traits,Alloc>&& lhs,
basic_string<charT,traits,Alloc>& rhs);

template<class charT, class traits, Allocator Alloc>
void swap(basic_string<charT,traits,Alloc>& lhs,
basic_string<charT,traits,Alloc>&& rhs);

// 21.3.8.9: inserters and extractors
template<class charT, class traits, Allocator Alloc>
basic_istream<charT,traits>&
operator>>(basic_istream<charT,traits>&& is,
basic_string<charT,traits,Alloc>& str);

template<class charT, class traits, Allocator Alloc>
basic_ostream<charT, traits>&
operator<<(basic_ostream<charT, traits>&& os,
const basic_string<charT,traits,Alloc>& str);

template<class charT, class traits, Allocator Alloc>
basic_istream<charT,traits>&
getline(basic_istream<charT,traits>&& is,
basic_string<charT,traits,Alloc>& str,
charT delim);

template<class charT, class traits, Allocator Alloc>
basic_istream<charT,traits>&
getline(basic_istream<charT,traits>&& is,
basic_string<charT,traits,Alloc>& str);


// 21.3 Class template basic_string
namespace std {
template<class charT, class traits = char_traits<charT>,
Allocator Alloc = allocator<charT> >
class basic_string {
public:
// types:
typedef traits traits_type;
typedef typename traits::char_type value_type;
typedef Alloc allocator_type;
typedef typename Alloc::size_type size_type;
typedef typename Alloc::difference_type difference_type;
typedef typename Alloc::reference reference;
typedef typename Alloc::const_reference const_reference;
typedef typename Alloc::pointer pointer;
typedef typename Alloc::const_pointer const_pointer;
typedef implementation-defined iterator; // See 23.1
typedef implementation-defined const_iterator; // See 23.1
typedef std::reverse_iterator<iterator> reverse_iterator;
typedef std::reverse_iterator<const_iterator> const_reverse_iterator;
static const size_type npos = -1;

// 21.3.2 construct/copy/destroy:
explicit basic_string(const Alloc& a = Alloc());
basic_string(const basic_string& str);
basic_string(basic_string&& str);
basic_string(const basic_string& str, size_type pos, size_type n = npos,
const Alloc& a = Alloc());
basic_string(const charT* s,
size_type n, const Alloc& a = Alloc());
basic_string(const charT* s, const Alloc& a = Alloc());
basic_string(size_type n, charT c, const Alloc& a = Alloc());
template<InputIterator Iter>
basic_string(Iter begin, Iter end,
const Alloc& a = Alloc());
basic_string(initializer_list<charT>, const Alloc& = Alloc());
basic_string(const basic_string&, const Alloc&);
basic_string(basic_string&&, const Alloc&);
~basic_string();
basic_string& operator=(const basic_string& str);
basic_string& operator=(basic_string&& str);
basic_string& operator=(const charT* s);
basic_string& operator=(charT c);
basic_string& operator=(initializer_list<charT>);

// 21.3.3 iterators:
...

// 21.3.4 capacity:
...

// 21.3.5 element access:
...

// 21.3.6 modifiers:
...

basic_string& append(const basic_string& str);
basic_string& append(const basic_string& str, size_type pos,
size_type n);
basic_string& append(const charT* s, size_type n);
basic_string& append(const charT* s);
basic_string& append(size_type n, charT c);
template<InputIterator Iter>
basic_string& append(Iter first, Iter last);
basic_string& append(initializer_list<charT>);
void push_back(charT c);

basic_string& assign(const basic_string& str);
basic_string& assign(basic_string&& str);
basic_string& assign(const basic_string& str, size_type pos,
size_type n);
basic_string& assign(const charT* s, size_type n);
basic_string& assign(const charT* s);
basic_string& assign(size_type n, charT c);
template<InputIterator Iter>
basic_string& assign(Iter first, Iter last);
basic_string& assign(initializer_list<charT>);

basic_string& insert(size_type pos1, const basic_string& str);
basic_string& insert(size_type pos1, const basic_string& str,
size_type pos2, size_type n);
basic_string& insert(size_type pos, const charT* s, size_type n);
basic_string& insert(size_type pos, const charT* s);
basic_string& insert(size_type pos, size_type n, charT c);
iterator insert(const_iterator p, charT c);
void insert(const_iterator p, size_type n, charT c);
template<InputIterator Iter>
void insert(const_iterator p, Iter first, Iter last);
void insert(const_iterator p, initializer_list<charT>);

...
basic_string& replace(size_type pos1, size_type n1,
const basic_string& str);
basic_string& replace(size_type pos1, size_type n1,
const basic_string& str,
size_type pos2, size_type n2);
basic_string& replace(size_type pos, size_type n1, const charT* s,
size_type n2);
basic_string& replace(size_type pos, size_type n1, const charT* s);
basic_string& replace(size_type pos, size_type n1, size_type n2,
charT c);
basic_string& replace(iterator i1, iterator i2,
const basic_string& str);
basic_string& replace(iterator i1, iterator i2, const charT* s,
size_type n);
basic_string& replace(iterator i1, iterator i2, const charT* s);
basic_string& replace(iterator i1, iterator i2,
size_type n, charT c);
template<InputIterator Iter>
basic_string& replace(iterator i1, iterator i2,
Iter j1, Iter j2);
basic_string& replace(iterator, iterator, initializer_list<charT>);

...

// 21.3.7 string operations:
...

template <class charT, class traits, Allocator Alloc>
struct constructible_with_allocator_suffix<
basic_string<charT, traits, Alloc> > : true_type { };  
LWG  1081  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
JP 47 21.3   Typo. Missing ”>”

template <class charT, class traits, Allocator Alloc



should be



template <class charT, class traits, Allocator Alloc>  
Correct typo.   editor    ACCEPTED  
JP 48 21.3   char_traits does not use concept.

For example, create CharTraits concept and change as follows:



template<class charT, CharTraits traits = char_traits<charT>,

class Allocator = allocator<charT> >

class basic_string {  
Add a concept for char_traits.   LWG  1081  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 217
[340]
21.3   basic_string refers to constructible_with_allocator_suffix, which I thought was removed?   Remove the lines: template <class charT, class traits, class Alloc struct constructible_with_allocator_suffix< basic_string<charT, traits, Alloc> > : true_type { };   editor    ACCEPTED  
UK 218
[228]
21.3.1 ¶ 3   The identity "&*(s.begin() + n) == &*s.begin() + n" relies on operator& doing the "right thing", which (AFAICS) there is no requirement for. See my comment under clauses "23.2.1, 23.2.6" (p1 in both cases) - this is the same issue, but I've created a separate comment for basic_string because it is in a different chapter.   See my recommendations for "23.2.1, 23.2.6".   LWG  1170  ACCEPTED with MODIFICATIONS  
UK 219
[342]
21.3.6.6 [string.replace] ¶ 11   Effects refers to "whose first begin() - i1 elements" However i1 is greater than begin()...   Effects refers to "whose first i1 - begin() elements"   editor    ACCEPTED  
UK 220
[339]
21.3.8.9   The operator<< for basic_string takes the output stream by r-value reference. This is different from the same operator for error_code (19.4.2.6), bitset (20.2.6.3), shared_ptr (20.7.13.2.8), complex (26.3.6) and sub_match (28.4)   Use the same reference type for the all the library types. This should be the r-value reference. There are other places in the standard where TR1, and new classes, did not receive an 'R-value' update.   LWG  825  ACCEPTED with MODIFICATIONS

N2844 changed the rvalue reference binding rules. That paper includes generic templates operator<< and operator>> that adapt rvalue streams.  
FR 33 22.1.1 [locale] ¶ 3   ios_base::iostate err = 0;



iostate is a bitmask type and so could be an enumeration. Probably using goodbit is the solution.  
  editor    ACCEPTED  
JP 49 22.1.3.2.2   codecvt does not use concept. For example, create CodeConvert concept and change as follows.

template<CodeConvert Codecvt, class Elem = wchar_t> class wstring_convert {  
Add a concept for codecvt.   LWG  1082  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
JP 50 22.1.3.2.2   Add custom allocator parameter to wstring_convert, since we cannot allocate memory for strings from a custom allocator.   Correct as follows.
template<class Codecvt, class Elem = wchar_t> class wstring_convert {
public:
typedef std::basic_string<char> byte_string;
typedef std::basic_string<Elem> wide_string;

should be

template<class Codecvt, class Elem = wchar_t,
Allocator WideAllocator = allocator<Elem>,
Allocator ByteAllocator = allocator<char>>
class wstring_convert {
public:
typedef std::basic_string<char, char_traits<char>, ByteAllocator> byte_string;
typedef std::basic_string<Elem, char_traits<Elem>, WideAllocator> wide_string;  
LWG  991  ACCEPTED  
FI 4 22.2.1.4.1 22.2.1.4.2   to_end and to_limit are both used. Only one is needed.   Change to_limit to to_end.   editor    ACCEPTED  
FI 5 22.2.1.4.2 ¶ #3   [ Note: As a result of operations on state, it can return ok or partial and set next == from and to_next != to. —end note ]

"next" should be "from_next."

Also, the sentence applies to all the examples, including do_in and do_out.

Reasoning: When reading one element of multibyte source data such as UTF-8, it is possible that from_next is incremented, to_next is unaltered, state is altered and return value is partial. When reading one element of wide character data, the output can be several multibyte characters, so it is possible that from_next is unaltered, to_next is advanced, state is altered and return value is partial.  
[ Note: As a result of operations on state, do_in and do_out can return ok or partial and set from_next == from and/or to_next != to. —end note ]   editor    ACCEPTED  
FI 6 22.2.1.5

See also 22.2.1.4 (1,2,3)  
codecvt_byname is only specified to work with locale names. There is no built-in means to find a codecvt with a character set's name. A locale and a character set are not the same. If the user has data which is encoded in a certain character set and she wants to create a codecvt which can convert from that character set to another one, she must iterate through locales to find one, or use external means (iconv, ICU's uconv). Specifying a locale with the character set is not a suitable solution, since there is no built-in mapping from character sets to locales. It is only possible to inquire the character set once the locale is known.   There should be a built-in means to find a codecvt with a pair of character set names.   LWG    REJECTED

There is interest (Martin Sebor, POSIX folks) in solving this problem, but addressing it is controversial because it's probably too late in the process for what looks like a new feature.  
FI 7 22.2.1.4 ¶ 1,2,3   The word "codeset" is used, whereas the word "character set" is used elsewhere in the text. The words are intended to convey the same concept, so only one should be used (or always both together).   Change "codeset" to "character set."   editor    ACCEPTED  
JP 51 22.2.5.1.1 ¶ 7th para, 1st line   A parameter `end’ should be `fmtend’. get() function had two `end’ parameters at N2321.

iter_type get (iter_type s, iter_type end, ios_base& f, ios_base::iostate& err, tm* t, const char_type* fmt, const char_type *end) const;

The function prototype of get() has been corrected at N2800, but a Requires statement still refers `end’ parameter.  
Correct as follows.

Requires: [fmt,end) shall be a valid range.

should be

Requires: [fmt,fmtend) shall be a valid range.  
editor    ACCEPTED  
JP 52 22.2.5.1, 22.2.5.2, 22.2.6.1   InputIterator does not use concept.   Correct as follows.

22.2.5.1

template <class charT, class InputIterator = istreambuf_iterator<charT> >
class time_get : public locale::facet, public time_base {
public:
typedef charT char_type;
typedef InputIterator iter_type;

should be

template <class charT, InputIterator InputIter = istreambuf_iterator<charT> >
class time_get : public locale::facet, public time_base {
public:
typedef charT char_type;
typedef InputIter iter_type;


22.2.5.2

template <class charT, class InputIterator = istreambuf_iterator<charT> >
class time_get_byname : public time_get<charT, InputIterator> {
public:
typedef time_base::dateorder dateorder;
typedef InputIterator iter_type;

should be

template <class charT, InputIterator InputIter = istreambuf_iterator<charT> >
class time_get_byname : public time_get<charT, InputIter> {
public:
typedef time_base::dateorder dateorder;
typedef InputIter iter_type;


22.2.6.1

template <class charT,
class InputIterator = istreambuf_iterator<charT> >
class money_get : public locale::facet {
public:
typedef charT char_type;
typedef InputIterator iter_type;

should be

template <class charT,
InputIterator InputIter = istreambuf_iterator<charT> >
class money_get : public locale::facet {
public:
typedef charT char_type;
typedef InputIter iter_type;  
LWG  1083  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
JP 53 22.2.5.3 , 22.2.5.4   OutputIterator does not use concept.   Correct as follows.

22.2.5.3

template <class charT, class OutputIterator = ostreambuf_iterator<charT> >
class time_put : public locale::facet {
public:
typedef charT char_type;
typedef OutputIterator iter_type;

 should be

template <class charT, OutputIterator OutputIter = ostreambuf_iterator<charT> >
class time_put : public locale::facet {
public:
typedef charT char_type;
typedef OutputIter iter_type;


22.2.5.4

template <class charT, class OutputIterator = ostreambuf_iterator<charT> >
class time_put_byname : public time_put<charT, OutputIterator>
{
public:
typedef charT char_type;
typedef OutputIterator iter_type;

should be

template <class charT, OutputIterator OutputIter = ostreambuf_iterator<charT> >
class time_put_byname : public time_put<charT, OutputIter>
{
public:
typedef charT char_type;
typedef OutputIter iter_type;  
LWG  1083  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
JP 54 23 ¶ 2nd para, Table 79   There is not <forward_list> in Table 79.   Add <forward_list> between <deque> and <list>.   editor    ACCEPTED  
UK 221
[287]
23 ¶ Table 79   The table is missing the new <forward_list> header.   Add <forward_list> to the table for sequence containers. Alternative (technical) solution might be to merge <forward_list> into <list>.   editor    ACCEPTED  
UK 222
[295]
23   It is not clear what purpose the Requirement tables serve in the Containers clause. Are they the definition of a library Container? Or simply a conventient shorthand to factor common semantics into a single place, simplifying the description of each subsequent container? This becomes an issue for 'containers' like array, which does not meet the default-construct-to-empty requirement, or forward_list which does not support the size operation. Are these components no longer containers? Does that mean the remaining requirements don't apply? Or are these contradictions that need fixing, despite being a clear design decision?   Clarify all the tables in 23.1 are there as a convenience for documentation, rather than a strict set of requirements. Containers should be allowed to relax specific requirements if they call attention to them in their documentation. The introductory text for array should be expanded to mention a default constructed array is not empty, and forward_list introduction should mention it does not provide the required size operation as it cannot be implemented efficiently.   LWG  1034  ACCEPTED with MODIFICATIONS  
JP 55 23.1.1 ¶ 3rd para, 4th line   It seems that “the MinimalAllocator concep” is the typo of “the MinimalAllocator concept”.   Change to … models the MinimalAllocator concept.   editor    ACCEPTED  
UK 223
[285]
23.1.1 ¶ 3   The library does not define the MinimalAllocator or ScopedAllocator concepts, these were part of an earlier Allocators proposal that was rejected.   Remove the references to MinimalAllocator and ScopedAllocator, or add definitions for these concepts to clause 20.7.   LWG  Doc  ACCEPTED with MODIFICATIONS

http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2009/n2900.html

See paper N2840 
UK 224
[298]
23.1.1 ¶ 8   This paragraph implicitly requires all containers in clause 23 to support allocators, which std::array does not.   Add an 'unless otherwise specified' rider somewhere in p8, or move the whole array container from clause 23 [containers] to clause 20 [utilies] to accompany bitset, pair and tuple.   LWG  Doc  ACCEPTED with MODIFICATIONS

See paper N2840 
UK 225
[299]
23.1.1 ¶ Table 81   Inconsistent words used to say the same thing. Table 80 describes iterator/const_iterator typedef as returning an "iterator type whose value type is T". Table 81 expresses the same idea as an "iterator type pointing to T". Express identical ideas with the same words to avoid accidentally introducing subtlety and confusion   Change return types for X::(const)_reverse_iterator to say "iterator type whose value type is (const) T".   editor    ACCEPTED  
UK 226
[336]
23.1.1 ¶ 10   <array> must be added to this list. In particular it doesn't satisfy: - no swap() function invalidates any references, pointers, or iterators referring to the elements of the containers being swapped. and probably doesn't satisfy: — no swap() function throws an exception.   If <array> remains a container, this will have to also reference array, which will then have to say which of these points it satisfies.   LWG  1035  REJECTED

No consensus for change.  
UK 227
[146]
23.1.1 ¶ Table 80   The post-condition for a = rv uses the word “construction” when it means “assignment”   Replace the word “construction” with the word “assignment”   editor    ACCEPTED  
UK 228
[283]
23.1.1 ¶ 3   Line 4 contains a spelling mistake in the fragment "MinimalAllocator concep."   Replace "concep" with "concept"   editor    ACCEPTED  
UK 229
[284]
23.1.1 ¶ 3   The fragment "A container may directly call constructors" is not technically correct as constructors are not callable.   Replace "A container may directly call constructors and destructors for its stored objects" with something similar to "A container may directly construct its stored objects and call destructors for its stored objects"   editor    ACCEPTED  
UK 230
[147]
23.1.2 ¶ 1   “implementations shall consider the following functions to be const” - what does this mean? I don't understand what it means by implementations considering the functions to be const – surely they are either declared const or not?   Clarify what is meant and what requirements an implementation must satisfy.   LWG    REJECTED

After considerable discussion and consideration, we do not feel this is a defect given the reference to [res.on.data.races].  
JP 56 23.1.3 ¶ 12th para, Table 84   `array’ is unstated in Table 84 - Optional sequence container operations.   Add `array’ to Container field for the following Expression.

a.front()

a.back()

a[n]

a.at(n)  
editor    ACCEPTED  
UK 231
[300]
23.1.3 ¶ 9-11   These paragraphs are redundant now that Concepts define what it means to be an Iterator and guide overload resolution accordingly.   Strike 23.1.3p9-11. Make sure std::basic_string has constraints similar to std::vector to meet this old guarantee.   LWG  1036  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 232
[301]
23.1.3 ¶ Table 84   match_results may follow the requirements but is not listed a general purpose library container.   Remove reference to match_results against a[n] operation   LWG  1037  ACCEPTED  
UK 233
[302]
23.1.3 ¶ Table 84   Add references to the new containers.   Add reference to array to the rows for: a.front(), a. back(), a[n] a.at(n). Add reference to forward_list to the rows for: a.front(), a.emplace_front(args), a.push_front(t), a.push_front(rv), a.pop_front(). Add reference to basic_string to the row for: a.at(n).   LWG  1038  ACCEPTED  
UK 234
[346]
23.1.3 ¶ Table 84   Ther reference to iterator in semantics for back should also allow for const_iterator when called on a const-qualified container. This would be ugly to specify in the 03 standard, but is quite easy with the addition of auto in this new standard.   Replace iterator with auto in semantics for back: { auto tmp = a.end(); --tmp; return *tmp; }   LWG  1039  ACCEPTED  
UK 235
[148]
23.1.3 ¶ 1   “The library provides three basic kinds of sequence containers: vector, list, and deque” - text appears to be out of date re addition of array and forward_list   Change the text to read: “The library provides five basic kinds of sequence containers: array, deque, forward_list, list and vector”.   editor    ACCEPTED  
UK 236
[150]
23.1.3 ¶ 2   [ I've moved (1) into a separate comment because I believe it is editorial in the simple sense, whereas (2) and (3) are not so straight forward ] (2) “vector is the type of sequence container that should be used by default” -- As I understand it vector was considered first port of call because the things it has in common with the native array make programmers (especially those new to the container library) feel like they are on familiar territory. However, we now have the array container, so I think this should be recommended as the first port of call. (3) This paragraph is actually giving guidance on the use of the containers and should not be normative text   Remove this paragraph   editor    ACCEPTED with MODIFICATIONS

Reworded the paragraph and its predecessor to reflect five basic sequence containers.  
UK 237
[334]
23.1.3 ¶ 2   vector, list, and deque offer the programmer different complexity trade-offs and should be used accordingly - this ignores array and forward_list   Modify the text to read: "array, deque, forward_list, list and vector offer the programmer different complexity trade-offs and should be used accordingly"   editor    ACCEPTED  
UK 238
[347]
23.1.4 ¶ 6   Leaving it unspecified whether or not iterator and const_iterator are the same type is dangerous, as user code may or may not violate the One Definition Rule by providing overloads for both types. It is probably too late to specify a single behaviour, but implementors should document what to expect. Observing that problems can be avoided by users restricting themselves to using const_iterator, add a note to that effect.   Change 'unspecified' to 'implementation defined'. Add "[Note: As itererator and const_iterator have identical semantics in this case, and iterator is convertible to const_iterator, users can avoid violating the One Definition Rule by always using const_iterator in their function parameter lists -- end note]   LWG  1040  ACCEPTED with MODIFICATIONS  
UK 239
[447]
23.1.4 ¶ 85   It is not possible to take a move-only key out of an unordered container, such as (multi)set or (multi)map, or the new hashed containers.   Add below a.erase(q), a.extract(q), with the following notation: a.extract(q), Return type pair<key, iterator> Extracts the element pointed to by q and erases it from the set. Returns a pair containing the value pointed to by q and an iterator pointing to the element immediately following q prior to the element being erased. If no such element exists,returns a.end().   LWG  1041  REJECTED  
UK 240
[427]
23.1.6.1 ¶ 12   The axiom EmplacePushEquivalence should be asserting the stronger contract that emplace and insert return the same iterator value, not just iterators that dereference to the same value. This is a similar statement that is easier to express and should be equivalent - the idea that insert and emplace might return iterator values that do not compare equal but point to the same element should fail somewhere in the iterator concepts. Also, this axiom should be renamed to reflect its connection with insert, rather than push_front/push_back,   Remove the * to deference the returned iterator either side of the == in the EmplacePushEquivalence axiom, rename the axiom EmplacementInsertionEquivalence : requires InsertionContainer<C> && Constructible<value_type, Args...> axiom EmplacementInsertionEquivalence(C c, const_iterator position, Args... args) { emplace(c, position, args...) == insert(c, position, value_type(args...)); }   LWG    ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
JP 57 23.1.6.3 ¶ 1st para, 4th line   Typo, duplicated "to"

"to to model insertion container concepts."  
Remove one.   editor    ACCEPTED  
UK 241
[286]
23.2.1   std::array does not have an allocator, so need to document an exception to the requirements of 23.1.1p3   add exception to 23.1.1p3   LWG   

See paper N2840 
UK 242
[355]
23.2.1 ¶ 3   std:: qualification no longer needed for reverse_iterator.   remove std:: qualification from std::reverse_iterator<iterator> and std::reverse_iterator<const_iterator>   editor    ACCEPTED  
UK 243
[337]
23.2.1 ¶ 3   Most containers, and types in general have 3 swaps: swap(T&, T&) swap(T&&, T&) swap(T&, T&&) But array only has swap(T&, T&).   add the other two swaps.   LWG    REJECTED

After discussing D2844, it was decided to remove all the r-value-ref swap overloads from containers. Therefore adding them to array has no benefit.  
UK 244
[153]
23.2.1, 23.2.6 ¶ 1   The validity of the expression &a[n] == &a[0] + n is contingent on operator& doing the “right thing” (as captured by the CopyConstructible requirements in table 30 in C++2003). However this constraint has been lost in the Concepts of C++0x. This applies to vector and array (it actually applies to string also, but that's a different chapter, so I'll file a separate comment there and cross-reference).   Define a ContiguousStrorage and apply it to vector,array and string. The Concept (supplied by Alisdair M) looks like this: Concept< typename C > ContiguousStrorage { requires Container<C>; typename value_type = C::value_type; value_type * data( C ); axiom Contiguous { C c; true = equal_ranges( data( c), data(c) + size(c), begin(c)); } };   LWG  1042  REJECTED

All concepts-related text has been removed from the draft. The problem was solved by removal of concepts.  
UK 245
[358]
23.2.3 ¶ 2   The predicate types used in special member function of forward_list should be CopyConstructible, as per the algorithms of the same name. Note: an alternate solution would be to require these callable concepts to be CopyConstructible in clause 20, which would simplify the library specification in general. See earlier comment for details, that would render this one redundant.   Add CopyConstructible requirement to the following signatures: template <Predicate<auto, T> Pred> requires CopyConstructible<Pred> void remove_if(Pred pred); template <EquivalenceRelation<auto, T> BinaryPredicate> requires CopyConstructible<BinaryPredicate> void unique(BinaryPredicate binary_pred); template <StrictWeakOrder<auto, T> Compare> requires CopyConstructible<Compare> void merge(forward_list<T,Alloc>&& x, Compare comp); template <StrictWeakOrder<auto, T> Compare> requires CopyConstructible<Compare> void sort(Compare comp);   LWG    REJECTED

UK245 with additional comments on UK200 in clause 20: After further discussion of UK200, we do not think adding constraints to predicates is a good idea. Straw poll on UK245: status quo, 5 pro - 0 con; add copy-constructible, 1 pro - 3 con; no consensus for moving away from the status quo.  
JP 58 23.2.3.2 ¶ 1st line before 1st para   Unnecessary "{" exists before a word iterator like "{iterator before_begin()".   Remove "{"   editor    ACCEPTED  
JP 59 23.2.4.4   Types of the third and forth parameter of splice() are iterator at 23.2.4.4, though types of them are const_iterator at 23.2.4. (They are both const_iterator on N2350)   Correct as follows.

void splice(const_iterator position, list<T,Allocator>&& x, iterator i);

void splice(const_iterator position, list<T,Allocator>&& x,

iterator first, iterator last);



should be



void splice(const_iterator position, list<T,Allocator>&& x, const_iterator i);

void splice(const_iterator position, list<T,Allocator>&& x,

const_iterator first, const_iterator last);  
editor    ACCEPTED  
US 83 23.2.6.2 ¶ 7   "shrink_to_fint" should be "shrink_to_fit".     editor    ACCEPTED  
UK 246
[350]
23.3.2.2   The content of this sub-clause is purely trying to describe in words the effect of the requires clauses on these operations, now that we have Concepts. As such, the desctiption is more confusing than the signature itself. The semantic for these functions is adequately covered in the requirements tables in 23.1.4.   Strike 23.3.2.2 entirely. (but do NOT strike these signatures from the class template definition!)   LWG  1091  ACCEPTED with MODIFICATIONS

This comment was submitted as editorial, but the project editor has classified it as technical. Solved by removing concepts.  
UK 247
[46]
24.1   Iterator concepts are not extensive enough to merit a whole new header, and should be merged into <concpts>. This is particularly important for supporting the new for loop syntax which requires access to the Range concept. The required header to enable this syntax shoud have a simple name, like <concepts>, rather than something awkward to type like <iterator_concepts>.   Move the concepts of <iterator_concepts> into the <concepts> header. We take no position on moving the text from Clause 24 to Clause 20 though.   LWG    REJECTED

We believe the separate header to have value.  
UK 248
[47]
24.1 ¶ 6   The text "so for any iterator type there is an iterator value that points past the last element of a corresponding container" is slightly misleading. Iterators can refer into generalised ranges and sequences, not just containers. A broader term than 'container' should be used.   Replace the reference to container with a more appropriate concept   editor    ACCEPTED  
UK 250
[50]
24.1.1   A default implementation should be supplied for the post-increment operator to simplify implementation of iterators by users.   Copy the Effects clause into the concept description as the default implementation. Assumes a default value for postincrement_result   LWG  1084  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 251
[51]
24.1.1 ¶ 3   The post-increment operator is dangerous for a general InputIterator. The multi-pass guarantees that make it meaningful are defined as part of the ForwardIterator refinement. Any change will affect only constrained templates that have not yet been written, so should not break existing user iterators which remain free to add these operations. This change will also affect the generalised OutputIterator, although there is no percieved need for the post-increment operator in this case either.   Move declaration of postincrement operator and postincrement_result type from Interator concept to the ForwardIterator concept   LWG  1009  REJECTED

Without concepts we do not feel that input iterator post increment is broken.  
UK 252
[53]
24.1.2 ¶ 3   istream_iterator is not a class, but a class template   Change 'class' to 'class template' in the note.   editor    ACCEPTED  
UK 253
[54]
24.1.3 ¶ 1   First sentance does not make gramatical sense, Seems to be missing the words 'if it' by comparison with similar sentance in other subsections   Add the words 'if it' : "X satisfies the requirements of an output iterator IF IT meets the syntactic and semantic requirements"   editor    ACCEPTED  
UK 254
[55]
24.1.3 ¶ 5   This postcondition for pre-increment operator should be written as an axiom   Move the postcondition into the concept definition as an axiom   LWG    ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 255
[56]
24.1.4 ¶ 4   This postcondition for pre-increment operator should be written as an axiom   Move the postcondition into the concept definition as an axiom   LWG    ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 256
[57]
24.1.5 ¶ 3, 4, 5   The relationship between pre- and post- decrement should be expressed as an axiom.   Move the text specification of pre/post-conditions and behaviour into an axiom within the BidirectionalIterator concept   LWG    ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 257
[58]
24.1.5   There is a reasonable default for postdecrement_result type, which is X. X is required to be regular, therefore CopyConstructible and a valid ResultType. Together with the next comment this simplifies user defined iterator implentations   Add the default : typename postincrement_result = X;   LWG    REJECTED

postdecrement_result is deduced.  
UK 258
[50]
24.1.5   A default implementation should be supplied for the post-decrement operator to simplify implementation of iterators by users.   Copy the Effects clause into the concept description as the default implementation. Assumes a default value for postincrement_result   LWG  1085  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 259
[60]
24.1.5   postdecrement_result is effectively returning a copy of the original iterator value, so should have similar constraints, rather than just HasDereference. If Concepts do not support this circularity of definition suggest that concepts feature may want a little more work   Add the requirement: requires Iterator< postdecrement_result >;   LWG    REJECTED

Rejected, unless Alisdair comes back with more motivation.  
UK 260
[61]
24.1.5 ¶ 6   The effects clause for post-decrement iterator should be available as an axiom and a default implementation, where the compiler can make better use of it.   Move the Effects clause into the BidirectionalIterator concept definition as an axiom, and as the default implementation for the operation.   LWG    ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 249
[64]
24.1.6 ¶ 2   The semantic for operator+= should also be provided as a default implementation to simplify implementation of user-defined iterators   Copy the text from the effects clause into the RandomAccessIterator concept as the default implementaiton.   LWG    REJECTED

Violates complexity requirements.  
UK 261
[62]
24.1.6   To simplify user defined random access iterator types, the subscript_reference type should default to reference   typename subscript_reference = reference;   LWG    REJECTED

Subscript reference isn't used.

In c++std-lib-23104, Daniel Krügler commented, “this [proposed change] would disable "auto-deduction" of the return type of any operator[] as described by [concept.map.assoc]/4+5.”  
UK 262
[65]
24.1.6 ¶ 3, 4   Effects and post-conditions for operator+ are more useful if expressed as axioms, and supplied as default implementations.   Move the effects and Postcondition definitions into the RandomAccessIterator concept and copy the code in the specification as the default implementation of these operations.   LWG   

All concepts-related text has been removed from the draft.  
UK 263
[66]
24.1.6 ¶ 5   This requirement on operator-= would be better expressed as a default implementation in the concept, with a matching axiom   Move the specification for operator-= from the returns clause into an axiom and default implementation within the RandomAccessIterator concept   LWG  1010  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 264
[67]
24.1.6 ¶ 6   Effects clauses are better expressed as axioms where possible.   Move code in operator- effects clause into RandomAccessIterator concept as both a default implementation and an axiom   LWG   

All concepts-related text has been removed from the draft.  
UK 265
[68]
24.1.6 ¶ 8   This effects clause is nonesense. It looks more like an axiom stating equivalence, and certainly an effects clause cannot change the state of two arguments passed by const reference   Strike the Effects clause   LWG  1079  ACCEPTED with MODIFICATIONS  
UK 266
[69]
24.1.6 ¶ 9   This sentance should be provided as a default definition, along with a matching axiom   Move the Returns clause into the spefication for RandomAccessIterator operator- as a default implementation. Move the Effects clause as the matching axiom.   LWG   

All concepts-related text has been removed from the draft.  
UK 267
[70]
24.1.6 ¶ 24.1.6   The code in the Requires clause for RandomAccessIterator operator[] would be better expressed as an axiom.   Rewrite the Requires clause as an axiom in the RandomAccessIterator concept   LWG    ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 268
[71]
24.1.6 ¶ 12   This note is potentialy confusing as __far enters the syntax as a clear language extension, but the note treats it as a regular part of the grammar. It might be better expressed using attributes in the current wording.   Clean up the note to either avoid using language extension, or spell out this is a constraint to support extensions.   editor    ACCEPTED  
JP 60 24.1.8 ¶ 1st para   Capability of an iterator is too much restricted by concept.

Concept of std::Range is defined as:

concept Range<typename T> {
InputIterator iterator;
iterator begin(T&);
iterator end(T&);
}

So the following code generates an error.

template <std::Range Rng>
void sort(Rng& r)
{
// error! Rng::iterator does not satisfy requirements of a random
// access iterator.
std::sort(begin(r), end(r));
}

std::vector<int> v; // vector::iterator is a random access iterator.
sort(v);

This is because the concept of an iterator of std::Range is InputIterator. For this reason, a random access iterator loses its capability when passed to a std::Range parameter.

To be able to work the above code, we need to write as follows:

template <std::Range T>
requires std::RandomAccessIterator<T::iterator> &&
std::ShuffleIterator<T::iterator> &&
std::LessThanComparable<T::iterator::value_type>
void sort(T& r)
{
sort(begin(r), end(r));
}

std::vector<int> v;
sort(v);

It needs quiet a few amount of codes like this only to recover random access capability from InputIterator concept.

We can write the following valid code with Boost.Range, which is implemented with using C++03 SFINAE.

template <class Range>
void sort(Range& r)
{
std::sort(boost::begin(r), boost::end(r));
}

std::vector<int> v;
sort(v); // OK

One of the motivation to introduce concepts are supporting template programming techniques by language directly to eliminate hacky techniques such as tag-dispatch, SFINAE and Type Traints. But SFINAE will be kept using because it needs quite a few amount of codes without using SFAINAE.  
Add InputRange, OutputRange, ForwardRange, BidirectionalRange and RandomAccessRange.   LWG    REJECTED

Beyond the scope of the Standard for C++0x because we are not supplying range-based algorithms.  
UK 269
[16]
24.3 ¶ 3   'decrements for negative n' seems to imply a negative number of decrement operations, which is odd.   Need simple, clearer wording   editor    ACCEPTED  
UK 270
[17]
24.3 ¶ 4   The reachability constraint in p5 means that a negavite result, implying decrements operations in p4, is not possible   Split the two overloads into separate descriptions, where reachability is permitted to be in either direction for RandomAccessIterator   LWG  940  ACCEPTED with MODIFICATIONS

Solved by N3066  
UK 271
[145]
24.3 ¶ 6,7   next/prev return an incremented iterator without changing the value of the original iterator. However, even this may invalidate an InputIterator. A ForwardIterator is required to guarantee the 'multipass' property.   Replace InputIterator constraint with FOrwardIterator in next and prev function templates.   LWG  1011  ACCEPTED with MODIFICATIONS  
UK 272
[159]
24.4   reverse_iterator and move_iterator use different formulations for their comparison operations. move_iterator merely requires the minimal set of operations, < and ==, from its underlying iterator and synthesizes all oprations from these two. reverse_iterator relies on the undelying iterator to support all comparision operations directly. In practice, move_iterator can only be implemented this way as it must support iterator types that are merely InputIterators, and so SemiRegular and not Regular. However, reserse_iterator has an existing specification and any change of semantic could change behaviour of conforming programs today - although an iterator that yields different results for (a > b) than (b < a) may fall foul of some semantic consistency requirements, even if the syntax is met.   Rephrase the reverse_iterator comparison operations using only operators < and ==, as per the move_iterator specification.   LWG    REJECTED

No consensus.  
UK 274
[119]
24.4, 24.5   The subclauses for standard iterator adaptors could be better organised. There are essentially 3 kinds of iterator wrappers provided, stream iterators adapt streams and get their own subsection. insert iterators adapt containers, and get their own subsection but it is inserted into the middle of 24.4 Predifined iterators. reverse_iterator and move_iterator adpat other iterators, but their presentation is split by insert iterators   Promote 24.4.2 [insert.iterators] up one level to 24.6. Emphasize that insert iterators adapt containers Retarget 24.4 [predef.iterators] as iterator adapters for iterator templates that wrap other iterators.   editor    ACCEPTED  
UK 275
[18]
24.4.1.1   The constructor template taking a single Iterator argument will be selected for Copy Initialization instead of the non-template constructor taking a single Iterator argument selected by Direct Initialization.   The reverse_iterator template constructor taking a single Iterator argument should be explicit.   LWG    REJECTED

Withdrawn by submitter.  
UK 276
[19]
24.4.1.1   It is odd to have a mix of declaration stlyes for operator+ overloads. Prefer if either all are member functions, or all are 'free' functions.   Make the member operators taking a difference_type argument non-member operators   LWG    REJECTED

Not editorial, withdrawn by submitter.  
UK 277
[20]
24.4.1.2.1 ¶ 1   The default constructor default-initializes current, rather than value-initializes. This means that when Iterator corresponds to a trivial type, the current member is left un-initialized, even when the user explictly requests value intialization! At this point, it is not safe to perform any operations on the reverse_iterator other than assign it a new value or destroy it. Note that this does correspond to the basic definition of a singular iterator.   i/ Specify value initialization rather than default intialization or ii/ specify = default; rather than spell out the semantic. This will at least allow users to select value initialization and copy the iterator value. or iii/ Add a note to the description emphasizing the singular nature of a value-initialized reserve iterator.   LWG  1012  ACCEPTED with MODIFICATIONS  
UK 278
[21]
24.4.1.2.1 ¶ 3   There is an inconsistency between the constructor taking an iterator and the constructor template taking a reverse_iterator where one passes by value, and the other by const reference. The by-value form is preferred as it allows for efficient moving when copy elision fails to kick in.   Change the const reverse_iterator<U> & parameter to pass-by-value   LWG    REJECTED

We don't believe that copy elision is a sufficiently high priority for iterator types.  
UK 279
[24]
24.4.1.2.12, 24.4.3.2.12   The reason the return type became unspecified is LWG issue 386. This reasoning no longer applies as there are at least two ways to get the right return type with the new language facilities added since the previous standard.   Specify the return type using either decltype or the Iter concept map   LWG  1051  REJECTED

Without concepts we can no longer restrict this member in a trivial way. 
UK 280
[22]
24.4.1.2.4   The presence of the second iterator value is surprising for many readers who underestimate the size of a reverse_iterator object. Adding the exposition only member that is required by the semantic will reduce confusion.   Add reverse_iterator expsoition only member tmp as a comment to class declaration, as a private member   editor    ACCEPTED  
UK 281
[23]
24.4.1.2.5   The current specification for return value will always be a true pointer type, but reverse_iterator supports proxy iterators where the pointer type may be some kind of 'smart pointer'   Replace the existing returns specification with a copy of the operator* specification that returns this->tmp.operator->   LWG  1052  REJECTED

There is no consensus for making this change.  
UK 282
[5]
24.4.2.1, 24.4.2.2.2, 24.4.2.3, 24.4.2.4.2, 24.4.2.5, 24.4.2.6.2 ¶ n/a   Insert iterators of move-only types will move from lvalues   Add an additional constrained overload for operator= that requires !CopyConstructible<Cont::value_type> and mark it =delete.   LWG  901  ACCEPTED with MODIFICATIONS

Both comment and issue have been resolved by the adoption of N2844 (rvalue references safety fix).  
UK 283
[156]
24.4.2.5, 24.4.2.6.4   postincrement operator overloads traditionally return by value - insert_iterator is declared as return by reference. The change is harmless in this case, but either front/back_insert_iterator should take the matching change for consistency, or this function should return-by-value   change operator++(int) overload to return by value, not reference. Affects both class summary and operator definition in p   LWG    REJECTED

This is compatible with C++03; and we lack a consensus for change.  
JP 61 24.4.3.2.1 ¶ 2nd para, 1st line   Typo.

"intializing" should be "initializing"  
Add "i"   editor    ACCEPTED  
UK 284
[26]
24.5   The stream iterators need constraining with concepts/requrires clauses.   Provide constraints   LWG  1086  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 285
[27]
24.5.1 ¶ 1,2   Much of the content of p1 and the whole of p2 is a redundant redefinition of InputIterator. It should be simplified   Strike p2. Simplify p1 and add a cross-reference to the definition of InputIterator concept.   editor    ACCEPTED  
UK 286
[28]
24.5.1 ¶ 3   To the casual reader it is not clear if it is intended to be able to assign to istream_iterator objects. Specifying the copy constructor but relying on the implicit copy-assign operator is confusing.   Either provide a similar definition to the copy-assign operator as for the copy constructor, or strike the copy constructor   editor    REJECTED

The standard isn't written for casual readers. The copy constructor must be provided; the assignment operator is implicitly generated.  
UK 287
[25]
24.5.1.1 ¶ 2   It is not clear what the intial state of an istream_iterator should be. Is _value_ initialized by reading the stream, or default/value initialized? If it is initialized by reading the stream, what happens if the initialization is deferred until first dereference, when ideally the iterator value should have been that of an end-of-stream iterator which is not safely dereferencable?   Specify _value_ is initialized by reading the stream, or the iterator takes on the end-of-stream value if the stream is empty   LWG  788  ACCEPTED with MODIFICATIONS  
UK 288
[29]
24.5.1.1 ¶ 3   The provided specification is vacuous, offering no useful information.   Either strike the specification of the copy constructor, or simply replace it with an = default definition.   editor    REJECTED

There are many places like this. There's no point in changing just one.  
UK 289
[30]
24.5.1.2 ¶ 6   It is very hard to pick up the correct specification for istream_iterator::operator== as the complete specification requires reading two quite disconnected paragraphs, 24.5.1p3, and 24.5.1.2p6. Reading just the specifaction of the operation itself suggests that end-of-stream iterators are indistinguishable from 'valid' stream iterators, which is a very dangerous misreading.   Merge 24.5.1p3, equality comparison of end-of-stream-iterators, into 24.5.1.2p6, the specification of the equality operator for istream_iterator.   editor    REJECTED

The opening paragraphs give an overview; the Returns: clause for operator== gives the technical requirement. Mixing these two together would be more confusing.  
UK 290
[160]
24.5.2 ¶ 1   The character type of a string delimiter for an ostream_iterator should be const charT *, the type of the elements, not char *, a narrow character string.   Replace char * with const charT *   editor    ACCEPTED  
UK 291
[161]
24.5.2.2 ¶ 2   ostream_iterator postincrement operator returns by reference rather than by value. This may be a small efficiency gain, but it is otherwise unconventional. Prefer return-by-value.   ostream_iterator operator++(int);   LWG    REJECTED

This is compatible with C++03; and we lack a consensus for change.  
FR 34 24.5.3 [istreambuf. iterator]   There are two public sections, and the content of the second one is indented with respect to the first. I don't it should be.     editor    ACCEPTED  
UK 292
[163]
24.5.3 ¶ 1   Prefer the use of the new nullptr constant to the zero literal when using a null pointer in text.   Change istreambuf_iterator(0) to istreambuf_iterator(nullptr)   editor    REJECTED

Ad hoc replacements make things more confusing.  
UK 293
[164]
24.5.3 ¶ 2,3,4   The listed paragraphs redundantly redefine an input iterator, and redundancy can be a dangerous thing in a specification. Suggest a simpler phrasing below.   2. The result of operator*() on an end of stream is undefined. For any other iterator value a char_type value is returned. 3. Two end of stream iterators are always equal. An end of stream iterator is not equal to a non-end of stream iterator. 4. As istreambuf_iterator() is an InputIterator but not a ForwardIterator, istreambuf_iterators object can be used only for one-pass algorithms. It is not possible to assign a character via an input iterator.   editor    ACCEPTED  
UK 294
[166]
24.5.3.2 ¶ 2   Implicit converting constructors can be invoked at surprising times, so there should always be a good reason for declaring one.   Mark the two single-argument constructors take a stream or stream buffer as explicit. The proxy constructor should remain implicit. explicit istreambuf_iterator(basic_istream<charT,traits>& s) throw(); explicit istreambuf_iterator(basic_streambuf<charT,traits>* s) throw();   LWG    REJECTED  
UK 295
[173]
25   THere is a level of redundancy in the library specification for many algorithms that can be eliminated with the combination of concepts and default parameters for function templates. Eliminating redundancy simplified specification and reduces the risk of inttroducing accidental inconsistencies.   Adopt n2743, or an update of that paper.   LWG  1053  REJECTED

Too inventive, too late, would really need a paper.  
JP 62 25, 25.3.1.5, 26.3.6.5   The return types of is_sorted_until function and is_heap_until function are iterator. But basically, the return type of is_xxx function is bool. And the return type of lower_bound function and upper_bound is iterator.

So we think that it is reasonable to change those two functions.  
Change "is_sorted_until" to "sorted_bound"

Change "is_heap" to "heap_bound"  
LWG    REJECTED

No consensus to make the change.  
UK 296
[183]
25.1.8 ¶ 1   The 'Returns' of adjacent_find requires only HasEqualTo, or a Predicate. Requiring EqualityComparable or EquivalenceRelation seems too strong and not useful.   Change EqualityComparable to HasEqualTo and EquivalnceRelation to Predicate   LWG    REJECTED

No consensus to make the change.  
UK 297
[185]
25.2.11 ¶ 6   The definition of rotate_copy is very complicated. It is equivalent to: return copy(first, middle, copy(middle, last, result));   Change 'effects' to, returns, requires, complexity to: effects: equivalent to: return copy(first, middle, copy(middle, last, result));   editor    REJECTED

The definition is analogous to the definition of rotate, and that parallel aids understanding.  
UK 298
[186]
25.2.13 ¶ 13   partition_point requires a partitioned array   requires: is_partitioned(first, last, pred) != false;   editor    ACCEPTED  
UK 299
[352]
25.2.2   Should be consistent in style use of concepts in template parameter lists. The auto-OutputIterator sytle used in std::copy is probably preferred.   Change way signature is declared: template<InputIterator InIter, OutputIterator<auto, RvalueOf<InIter::reference>::type> OutIter> OutIter move(InIter first, InIter last, OutIter result);   editor    ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 300
[351]
25.2.3   Since publishing the original standard, we have learned that swap is a fundamental operation, and several common idioms rely on it - especially those related to exception safety. As such it belongs in the common <utility> header rather than the broader <algorithm> header, and likewise should move to clause 20. For backwards compatiblility the algorithm header should be required to #include <utility>, which would be covered in the resolution of LWG issue 343. There are already dependencies in <algorithm> on types declared in this header, so this comment does not create a new dependency.   Move primary swap template from <algorithm> into <utility>. Move 25.2.3 to somewhere under 20.2. Require <algorithm> to #include <utility> to access pair and provide legacy support for finding swap.   LWG    ACCEPTED  
UK 301
[184]
25.2.5   replace and replace_if have the requirement: OutputIterator<Iter, Iter::reference> Which implies they need to copy some values in the range the algorithm is iterating over. This is not however the case, the only thing that happens is const T&s might be copied over existing elements (hence the OutputIterator<Iter, const T&>   Remove OutputIterator<Iter, Iter::reference> from replace and replace_if   LWG  1087  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 302
[187]
25.3 ¶ 4   the concept StrictWeakOrder covers the definition of a strict weak ordering, described in paragraph 4.   Remove 4, and mention StrictWeakOrder in paragraph 1.   editor    REJECTED

There are at least a dozen places in the standard that refer to this definition of strict weak ordering.  
UK 303
[188]
25.3 ¶ 6   This paragraph just describes is_partitioned   6 A sequence [start,finish) is partitioned with respect to an expression f(e) if is_partitioned(start, finish, e) != false   editor    REJECTED

The paragraph describes something different. is_partitioned takes a predicate; "partitioned with respect to an expression" deals with an expression. While it's possible to wrap an expresion in a predicate, that would result in a circumlocution in the places where "partitioned with respect to an expression" is used.  
UK 304
[189]
25.3.6   The requires clauses of push_heap, pop_heap and make_heap are inconsistently formatted, dispite being identical   Format them identically.   editor    REJECTED

Seems to be a comment about an earlier version. In N2800 the requires clauses of push_heap and pop_heap are similar, and are formatted the same. make_heap has no requires clause.  
UK 305
[335]
25.3.7 ¶ 1, 9, 17   The negative requirement on IsSameType is a hold-over from an earlier draught with a variadic template form of min/max algorith. It is no longer necessary.   Strike the !IsSameType<T, Compare> constraint on min/max/minmax algorithms   LWG  1013  ACCEPTED  
US 84 26   Parts of the numerics chapter are not concept enabled.     LWG  1140  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
FR 35 26.3 [Complex numbers]   Instantiations of the class template complex<> have to be allowed for integral types, to reflect existing practice and ISO standards (LIA-III).     LWG  1154  REJECTED

There is no consensus for making this change.  
UK 306
[113]
26.4   Random number library component cannot be used in constrained templates   Provide constraints for the random number library   LWG  N/A  ACCEPTED

See paper N2836 
JP 63 26.4.8.5.1   No constructor of discrete_distribution that accepts initializer_list.

discrete_distribution initialize distribution by a given range (iterators), but temporary variable of a container or an array is needed in the following case.



int ar[] = {1, 2, 3};

discrete_distribution<> dist(ar, ar+3);



Other libraries also accept initializer_list, so change discrete_distribution library to accept initializer_list too.

 
Add the following constructer.

discrete_distribution(initializer_list<result_type>);  
LWG  874  ACCEPTED

See paper N2836 
JP 64 26.5.2   “valarray<T>& operator+= (initializer_list<T>);” is not defined.   Add valarray<T>& operator+= (initializer_list<T>);   LWG  1243  REJECTED

Request has been withdrawn by NB.  
UK 307
[394]
26.7 ¶ Footnote 288   The footnote refers to TR1, which is not a defined term in this standard. Drop the reference to TR1, those templates are a regular part of the standard now and how they were introduced is no longer relevant.   Drop the reference to TR1.   editor    ACCEPTED  
US 85 27   The input/output chapter is not concept enabled.     LWG  1141  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 308
[114]
27   iostreams library cannot be used from constrained templates   Provide constraints for the iostreams library, clause 27   LWG  1141  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
JP 65 27.4.4   Switch from “unspecified-bool-type” to “explicit operator bool() const”.   Replace "operator unspecified-bool-type() const;" with "explicit operator bool() const;"   LWG  1094  ACCEPTED with MODIFICATIONS  
JP 66 27.4.4.3 ¶ 1st para   Switch from “unspecified-bool-type” to “explicit operator bool() const”   Replace "operator unspecified-bool-type() const;" with "explicit operator bool() const;"   LWG  1094  ACCEPTED with MODIFICATIONS  
FR 36 27.6.1.2.2 [istream. formatted. arithmetic] ¶ 1, 2, and 3   iostate err = 0;



iostate is a bitmask type and so could be an enumeration. Probably using

goodbit is the solution.  
  editor    ACCEPTED  
FR 37 27.6.1.2.2 [istream. formatted. arithmetic] ¶ 3   else if (lval < numeric_limits<int>::min()

|| numeric_limits<int>::max() < lval))



The parentheses aren't balanced.  
  editor    ACCEPTED  
JP 67 27.7.1   basic_stringbuf dose not use concept.   Replace “class Allocator” to “Allocator Alloc”.

Correct as follows.

namespace std {
template <class charT, class traits = char_traits<charT>,
Allocator Alloc = allocator<charT> >
class basic_stringbuf : public basic_streambuf<charT,traits> {
public:
...

// 27.7.1.1 Constructors:
explicit basic_stringbuf(ios_base::openmode which
= ios_base::in | ios_base::out);
explicit basic_stringbuf
(const basic_string<charT,traits,Alloc>& str,
ios_base::openmode which = ios_base::in | ios_base::out);
basic_stringbuf(basic_stringbuf&& rhs);

...


// 27.7.1.3 Get and set:
basic_string<charT,traits,Alloc> str() const;
void str(const basic_string<charT,traits,Alloc>& s);

...
};

template <class charT, class traits, Allocator Alloc>
void swap(basic_stringbuf<charT, traits, Alloc>& x,
basic_stringbuf<charT, traits, Alloc>& y);
template <class charT, class traits, Allocator Alloc>
void swap(basic_stringbuf<charT, traits, Alloc>&& x,
basic_stringbuf<charT, traits, Alloc>& y);
template <class charT, class traits, Allocator Alloc>
void swap(basic_stringbuf<charT, traits, Alloc>& x,
basic_stringbuf<charT, traits, Alloc>&& y);
}  
LWG  1141  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
JP 68 27.7.2   basic_istringstream dose not use concept.   Replace “class Allocator” to “Allocator Alloc”.

Correct as follows.

namespace std {
template <class charT, class traits = char_traits<charT>,
Allocator Alloc = allocator<charT> >
class basic_istringstream : public basic_istream<charT,traits> {
public:
typedef charT char_type;
typedef typename traits::int_type int_type;
typedef typename traits::pos_type pos_type;
typedef typename traits::off_type off_type;
typedef traits traits_type;
typedef Alloc allocator_type;

// 27.7.2.1 Constructors:
explicit basic_istringstream(ios_base::openmode which = ios_base::in);
explicit basic_istringstream(
const basic_string<charT,traits,Alloc>& str,
ios_base::openmode which = ios_base::in);
basic_istringstream(basic_istringstream&& rhs);

// 27.7.2.2 Assign and swap:
basic_istringstream& operator=(basic_istringstream&& rhs);
void swap(basic_istringstream&& rhs);

// 27.7.2.3 Members:
basic_stringbuf<charT,traits,Alloc>* rdbuf() const;

basic_string<charT,traits,Alloc> str() const;
void str(const basic_string<charT,traits,Alloc>& s);

private:
// basic_stringbuf<charT,traits,Alloc> sb; exposition only
};

template <class charT, class traits, Allocator Alloc>
void swap(basic_istringstream<charT, traits, Alloc>& x,
basic_istringstream<charT, traits, Alloc>& y);
template <class charT, class traits, Allocator Alloc>
void swap(basic_istringstream<charT, traits, Alloc>&& x,
basic_istringstream<charT, traits, Alloc>& y);
template <class charT, class traits, Allocator Alloc>
void swap(basic_istringstream<charT, traits, Alloc>& x,
basic_istringstream<charT, traits, Alloc>&& y);
}  
LWG  1141  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
JP 69 27.7.3   basic_ostringstream dose not use concept.   Replace “class Allocator” to “Allocator Alloc”.

Correct as follows.

namespace std {
template <class charT, class traits = char_traits<charT>,
Allocator Alloc = allocator<charT> >
class basic_ostringstream : public basic_ostream<charT,traits> {
public:
// types:
typedef charT char_type;
typedef typename traits::int_type int_type;
typedef typename traits::pos_type pos_type;
typedef typename traits::off_type off_type;
typedef traits traits_type;
typedef Alloc allocator_type;

// 27.7.3.1 Constructors/destructor:
explicit basic_ostringstream(ios_base::openmode which = ios_base::out);
explicit basic_ostringstream(
const basic_string<charT,traits,Alloc>& str,
ios_base::openmode which = ios_base::out);
basic_ostringstream(basic_ostringstream&& rhs);

// 27.7.3.2 Assign/swap:
basic_ostringstream& operator=(basic_ostringstream&& rhs);
void swap(basic_ostringstream&& rhs);

// 27.7.3.3 Members:
basic_stringbuf<charT,traits,Alloc>* rdbuf() const;
basic_string<charT,traits,Alloc> str() const;
void str(const basic_string<charT,traits,Alloc>& s);
private:
// basic_stringbuf<charT,traits,Alloc> sb; exposition only
};

template <class charT, class traits, Allocator Alloc>
void swap(basic_ostringstream<charT, traits, Alloc>& x,
basic_ostringstream<charT, traits, Alloc>& y);
template <class charT, class traits, Allocator Alloc>
void swap(basic_ostringstream<charT, traits, Alloc>&& x,
basic_ostringstream<charT, traits, Alloc>& y);
template <class charT, class traits, Allocator Alloc>
void swap(basic_ostringstream<charT, traits, Alloc>& x,
basic_ostringstream<charT, traits, Alloc>&& y);
}  
LWG  1141  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
JP 71 27.7.3   Typo.

"template" is missing in "class basic_ostringstream" of the title of the chapter.  
Correct as follows.

27.7.3 Class basic_ostringstream



should be



27.7.3 Class template basic_ostringstream  
editor    ACCEPTED  
JP 72 27.7.4   basic_stringstream dose not use concept.   Replace "class Allocator" to "Allocator Alloc".

Correct as follows.

namespace std {
template <class charT, class traits = char_traits<charT>,
Allocator Alloc = allocator<charT> >
class basic_stringstream
: public basic_iostream<charT,traits> {
public:
// types:
typedef charT char_type;
typedef typename traits::int_type int_type;
typedef typename traits::pos_type pos_type;
typedef typename traits::off_type off_type;
typedef traits traits_type;
typedef Alloc allocator_type;

// constructors/destructor
explicit basic_stringstream(
ios_base::openmode which = ios_base::out|ios_base::in);
explicit basic_stringstream(
const basic_string<charT,traits,Alloc>& str,
ios_base::openmode which = ios_base::out|ios_base::in);
basic_stringstream(basic_stringstream&& rhs);

// 27.7.5.1 Assign/swap:
void swap(basic_stringstream&& rhs);

// Members:
basic_stringbuf<charT,traits,Alloc>* rdbuf() const;
basic_string<charT,traits,Alloc> str() const;
void str(const basic_string<charT,traits,Alloc>& str);
private:
// basic_stringbuf<charT, traits> sb; exposition only
};

template <class charT, class traits, Allocator Alloc>
void swap(basic_stringstream<charT, traits, Alloc>& x,
basic_stringstream<charT, traits, Alloc>& y);
template <class charT, class traits, Allocator Alloc>
void swap(basic_stringstream<charT, traits, Alloc>&& x,
basic_stringstream<charT, traits, Alloc>& y);
template <class charT, class traits, Allocator Alloc>
void swap(basic_stringstream<charT, traits, Alloc>& x,
basic_stringstream<charT, traits, Alloc>&& y);
}  
LWG  1141  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
JP 73 27.8.1.14   It is a problem from C++98, fstream cannot appoint a filename of wide character string(const wchar_t and const wstring&).   Add interface corresponding to wchar_t, char16_t and char32_t.   LWG  1150  REJECTED

This problem may be solved in TR2 by the filesystem library with a file path class with templated constructor.  
US 86 28   The regular expressions chapter is not concept enabled.     LWG  1142  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 309
[115]
28   Regular expressions cannot be used in constrained templates   Provide constraints for the regular expression library, clause 28   LWG  1142  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 310
[281]
28   The regex chapter uses iterators in the old pre-concept style, it should be changed to use concepts instead.   Use concepts for iterator template arguments throughout.   LWG  1142  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 314
[343]
28.4   The swap overloads for regex classes are only supplied for l-value references. Other sections of the library (eg 21 strings or 23 containers) provide two extra overloads taking an r-value reference as the first and second argument respectively.   Add the missing overloads to 28.4 and the corresponding later sections in 28 for each swap function. We want to accept AMs paper which proposes a single overload with two r-value references   LWG  1263  REJECTED

We have in general reverted to the single swap signature taking lvalue references, which could be seen as the alternative solution to UK 314, bringing consistency to the standard.  
UK 315
[344]
28.4 ¶ p6   6 Effects: string_type str(first, last); return use_facet<collate<charT> >( getloc()).transform(&*str.begin(), &*str.end()); Is it legal to dereference str.end() ?   Reword to effect clause to use legal iterator dereferences   editor    ACCEPTED  
UK 316
[345]
28.4 ff   The constructors for regex classes do not have an r-value overload.   Add the missing r-value constructors to regex classes.   LWG  723  ACCEPTED with MODIFICATIONS

Updated wording to reflect new "swap rules".  
UK 317
[278]
28.8   basic_string has both a constructor and an assignment operator that accepts an initializer list, basic_regex should have the same.   In the basic_regex synopsis, after: basic_regex& operator=(const charT* ptr); add: basic_regex& operator=(initializer_list<charT> il); And after paragraph 20 add: basic_regex& operator=(initializer_list<charT> il); Effects: returns assign(il.begin(), il.end());   LWG  1014 

The requested constructor was already present. The requested operator= was added.  
JP 74 28.8   “basic_regx & operator= (initializer_list<T>);” is not defined.   Add basic_regx & operator= (initializer_list<T>);   LWG  1014  ACCEPTED  
UK 318
[279]
28.8.2 ¶ para 22   Constructor definition should appear with the other constructors not after assignment ops.   Move para 22 to just after para 17.   editor    ACCEPTED  
UK 319
[280]
28.12.2   It was always expected that regex_token_iterator would be constructible from an array literal: indeed ideally this is the prefered method of initializing such an object. However, the best we could do in C++0x was: template <std::size_t N> regex_token_iterator(BidirectionalIterator a, BidirectionalIterator b, const regex_type& re, const int (&submatches)[N], regex_constants::match_flag_type m = regex_constants::match_default); Now that we have initializer_lists we should use them to remove this particular wart.   To the synopsis for regex_token_iterator, after template <std::size_t N> regex_token_iterator(BidirectionalIterator a, BidirectionalIterator b, const regex_type& re, const int (&submatches)[N], regex_constants::match_flag_type m = regex_constants::match_default); add regex_token_iterator(BidirectionalIterator a, BidirectionalIterator b, const regex_type& re, initializer_list<int> submatches, regex_constants::match_flag_type m = regex_constants::match_default); In 28.12.2.1 add the declaration: regex_token_iterator(BidirectionalIterator a, BidirectionalIterator b, const regex_type& re, initializer_list<int> submatches, regex_constants::match_flag_type m = regex_constants::match_default); And to the end of para 3 add: The forth constructor initializes the member subs to hold a copy of the sequence of integer values in the range [submatches.begin(), submatches.end()).   LWG  909  ACCEPTED  
US 87 29   The atomics chapter is not concept enabled. The adopted paper, N2427, did have those concepts.     LWG  1143  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 311
[116]
29   Atomic types cannot be used generically in a constrained template   Provide constraints for the atomics library, clause 29   LWG  1143  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 312
[157]
29   The contents of the <stdatomic.h> header are not listed anywhere, and <cstdatomic> is listed as a C99 header in chapter 17. If we intend to use these for compatibility with a future C standard, we should not use them now.   Remove <cstdatomic> from the C99 headers in table 14. Add a new header <atomic> to the headers in table 13. Update chapter 29 to remove reference to <stdatomic.h> and replace the use of <cstdatomic> with <atomic>. If and when WG14 adds atomic operations to C we can add corresponding headers to table 14 with a TR.   LWG  1145  ACCEPTED with MODIFICATIONS

Solved by N2992  
JP 75 29   A definition of enum or struct is the style of C using typedef.   Change to a style of C++.

Correct as follows.

29.1

namespace std {
typedef enum memory_order {
memory_order_relaxed, memory_order_consume, memory_order_acquire,
memory_order_release, memory_order_acq_rel, memory_order_seq_cst
} memory_order;
}

should be

namespace std {
enum memory_order {
memory_order_relaxed, memory_order_consume, memory_order_acquire,
memory_order_release, memory_order_acq_rel, memory_order_seq_cst
};
}

29.3.1

namespace std {
typedef struct atomic_bool {
...
} atomic_bool;
}

should be

namespace std {
struct atomic_bool {
...
};
}

namespace std {
typedef struct atomic_itype {
...
} atomic_itype;
}

should be

namespace std {
struct atomic_itype {
...
};
}

29.3.2

namespace std {
typedef struct atomic_address {
...
} atomic_address;
}

should be

namespace std {
struct atomic_address {
...
};
}

29.5

namespace std {
typedef struct atomic_flag {
...
} atomic_flag;
}

should be

namespace std {
struct atomic_flag {
...
};
}  
LWG    REJECTED

We believe the current syntax is most appropriate for an interface that is intended to be highly compatible with C.  
UK 313
[220]
29.1   seq_cst fences don't necessarily guarantee ordering http://home.twcny.rr.com/hinnant/cpp_extensions/issues_preview/lwg-active.html#926   Add a new paragraph after 29.1 [atomics.order]p5 that says For atomic operations A and B on an atomic object M, where A and B modify M, if there are memory_order_seq_cst fences X and Y such that A is sequenced before X, Y is sequenced before B, and X precedes Y in S, then B occurs later than A in the modifiction order of M.   LWG  926  ACCEPTED with MODIFICATIONS  
US 88 29.2   The "lockfree" facilities do not tell the programmer enough.   Expand the "lockfree" facilities. See the attached paper "Issues with the C++ Standard" under Chapter 29, "atomics.lockfree doesn't tell the programmer enough"   LWG  1146  ACCEPTED with MODIFICATIONS  
US 89 29.3.1 ¶ Table 122   The types in the table "Atomics for standard typedef types" should be typedefs, not classes. These semantics are necessary for compatibility with C.   Change the classes to typedefs.   editor    ACCEPTED  
US 90 29.4   Are atomic functions allowed to have non-volatile overloads?   Allow non-volatile overloads. See the attached paper "Issues with the C++ Standard, under Chapter 29, "Are atomic functions allowed to have non-volatile overloads?"   LWG  908, 1147  ACCEPTED with MODIFICATIONS

Solved by N2992.  
US 91 29.4   Whether or not a failed compare_exchange is a RMW operation (as used in 1.10 [intro.multithread]) is unclear.   Make failing compare_exchange operations not be RMW. See the attached paper under "atomic RMW status of failed compare_exchange"   LWG  1043  ACCEPTED with MODIFICATIONS

See paper N2925 
US 92 29.4   The effect of memory_order_consume with atomic RMW operations is unclear.   Follow the lead of fences [atomics.fences], and promote memory_order_consume to memory_order_acquire with RMW operations.   LWG    REJECTED

We can not see the issue being suggested by the comment.  
JP 76 30   A description for "Throws: Nothing." are not unified.

At the part without throw, "Throws: Nothing." should be described.  
Add "Throws: Nothing." to the following.

30.2.1.6 , 1st paragraph

30.3.3.1 , 4th paragraph

30.3.3.2.1 , 6th paragraph

30.4.1 , 7th and 8th paragraph

30.4.2 , 6th, 7th,19th,21th and 25th paragraph  
LWG  1089  ACCEPTED with MODIFICATIONS  
US 93 30   The thread chapter is not concept enabled.     LWG  1139  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 320
[117]
30   Threads library cannot be used in constrained templates   Provide constraints for the threads library, clause 30   LWG  1139  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 321
[172]
30   Throughout this clause, the term Requires: is used to introduce compile time requirements, which we expect to be replaced with concepts and requires in code. Run-time preconditions are introduced with the term "Preconditions:" which is not a defined part of the library documentation structure (17.5.2.4). However, this is exactly the direction that BSI would like to see the organisation move, replacing Requires: clauses with Preconditions: clasues throught the library. See comment against clause 17 for more details.   Decument Preconditions: paragraphs in 17.5.2.4, and use consistently through rest of the library.   editor    ACCEPTED with MODIFICATIONS

requires is no longer a keyword, so its use as a description of semantics is appropriate. “Preconditions” has been changed to “requires” wherever it occurs.  
US 94 30.1.2 ¶ 1   The first sentence of para 1 suggests that no other library function is permitted to call operating system or low level APIs.   Rewrite para 1 as: “ Some functions described in this Clause are specified to throw exceptions of type system_error (19.4.5 ). Such exceptions shall be thrown if a call to an operating system or underlying API results in an error that prevents the library function from satisfying its postconditions or from returning a meaningful value.”   editor    ACCEPTED  
US 95 30.1.3 ¶ 1   “native_handle_type” is a typedef, not a class member.   Several classes described in this Clause have a member native_handle (of type native_handle_type) . The

presence of this member and its semantics is implementation defined. [ Note: This member allows implementations to provide access to implementation details. The name of the member and the type are specified to facilitate portable compile-time detection. Actual use of this member or the corresponding type is inherently non-portable. —end note ]  
LWG    REJECTED

Not a defect. native_handle_type is a typedef, but it is also a member of the classes in question.  
US 96 30.1.4 ¶ 2   There is no definition here for monotonic clock.   Implementations should use a monotonic clock to measure time for these functions. A monotonic clock measures real time, but cannot be set, and is guaranteed to have no negative clock jumps.   LWG    REJECTED

There is a good definition. Also, see library issue 1158.  
UK 322
[168]
30.1.4 ¶ 2   Not all systms can provide a monotonic clock. How are they expected to treat a _for function?   Add at least a note explaining the intent for systems that do not support a monotonic clock.   LWG  1158  ACCEPTED with MODIFICATIONS  
UK 323
[171]
30.2.1 ¶ 1   The presence of a non-explicit variadic template constructor alongside an explicit single-argument constructor can lead to behaviour that is not intended: the variadic constructor will be selected for implicit conversions, defeating the purpose of the explicit single-argument constructor. Additionally the single-argument constructor is redundant; the variadic constructor can provide identical functionality with one *fewer* copies if the supplied func is an lvalue.   Mark constructor template <class F, class ...Args> thread(F&& f, Args&&... args); as explicit and remove the single-argument constructor.   LWG  929  ACCEPTED with MODIFICATIONS  
UK 324
[169]
30.2.1.1   thread::id objects should be as useable in hashing containers as they are in ordered associative containers.   Add thread::id support for std::hash   LWG  1182  ACCEPTED with MODIFICATIONS

Not a defect. See [unord.hash], where std::thread:id is already listed as a required specialization for std::hash().  
JP 77 30.2.1.2   "CopyConstructible" and "MoveConstructible" in "Requires: F and each Ti in Args shall be CopyConstructible if an lvalue and otherwise MoveConstructible." are reflected by interface.   Add a concept for constructor of thread.   LWG  1139  ACCEPTED with MODIFICATIONS  
JP 78 30.2.1.2 ¶ 4th para, 1st line   In "F and each Ti in Args", 'Ti' is not clear.   Replace "Ti" with "args"   editor    ACCEPTED  
US 97 30.2.1.3 ¶ 1   detach-on-destruction may result in “escaped” threads accessing objects with bounded lifetime after the end of their lifetime.   See document WG21 N2802=08-0312 written by Hans Boehm.   LWG  Doc  ACCEPTED with MODIFICATIONS

N2802 Alternative 2 was accepted at the Summit meeting.

See paper N2802 
US 98 30.2.1.3, 30.2.1.4   The current defined behavior for the std::thread destructor is to detach the thread. Unfortunately, this behavior exposes programmers to tricky, hard-to-diagnose, undefined behavior.   Change destruction behavior to undefined behavior, with a note strongly encouraging termination. See the attached paper "Issues with the C++ Standard" under Chapter 30, "Implicit thread detach is harmful".   LWG     
UK 325
[174]
30.3.3 ¶ 2   We believe constexpr literal values should be a more natural expression of empty tag types than extern objects as it should improve the compilers ability to optimize the empty object away completely.   Replace the extern declarations: extern const defer_lock_t defer_lock; extern const try_to_lock_t try_to_lock; extern const adopt_lock_t adopt_lock; with constexpr values constexpr defer_lock_t defer_lock{}; constexpr try_to_lock_t try_to_lock{}; constexpr adopt_lock_t adopt_lock{};   LWG  1044  ACCEPTED  
UK 326
[176]
30.3.3.2.1 ¶ 7   The precondition that the mutex is not owned by this thread offers introduces the risk of un-necessary undefined behaviour into the program. The only time it matters whether the current thread owns the mutex is in the lock operation, and that will happen subsequent to construction in this case. The lock operation has the identical pre-condition, so there is nothing gained by asserting that precondition earlier and denying the program the right to get into a valid state before calling lock.   Strike 30.3.3.2.1p7   LWG  1045  ACCEPTED  
UK 327
[179]
30.3.3.2.2 ¶ 4, 9, 14, 19   Not clear what the specification for error condition resource_deadlock_would_occur means. It is perfectly possible for this thread to own the mutex without setting owns to true on this specific lock object. It is also possible for lock operations to succeed even if the thread does own the mutex, if the mutex is recursive. Likewise, if the mutex is not recursive and the mutex has been locked externally, it is not always possible to know that this error condition should be raised, depending on the host operating system facilities. It is possible that 'i.e.' was supposed to be 'e.g.' and that suggests that recursive locks are not allowed. That makes sense, as the exposition-only member owns is boolean and not a integer to count recursive locks.   Add a precondition !owns. Change the 'i.e.' in the error condition to be 'e.g.' to allow for this condition to propogate deadlock detection by the host OS.   LWG  1159  ACCEPTED with MODIFICATIONS  
UK 328
[182]
30.3.3.2.2 ¶ 20   There is a missing precondition that owns is true, or an if(owns) test is missing from the effect clause   Add a precondition that owns == true. Add an error condition to detect a violation, rather than yield undefined behaviour.   LWG  1159  ACCEPTED with MODIFICATIONS  
UK 329
[203]
30.5   future, promise and packaged_task provide a framework for creating future values, but a simple function to tie all three components together is missing. Note that we only need a *simple* facility for C++0x. Advanced thread pools are to be left for TR2.   Provide a simple function along the lines of: template< typename F, typename ... Args > requires Callable< F, Args... > future< Callable::result_type > async( F&& f, Args && ... ); Semantics are similar to creating a thread object with a packaged_task invoking f with forward<Args>(args...) but details are left unspecified to allow different scheduling and thread spawning implementations. It is unspecified whether a task submitted to async is run on its own thread or a thread previously used for another async task. If a call to async succeeds, it shall be safe to wait for it from any thread. The state of thread_local variables shall be preserved during async calls. No two incomplete async tasks shall see the same value of this_thread::get_id(). [Note: this effectively forces new tasks to be run on a new thread, or a fixed-size pool with no queue. If the library is unable to spawn a new thread or there are no free worker threads then the async call should fail.]   LWG  1046  ACCEPTED with MODIFICATIONS

N2996 (Herb's and Lawrence's paper on Async)  
UK 330
[424]
30.5.1   30.5.1 (and then 30.5.7) refer to a specialisation of constructible_with_allocator_prefix<> However this trait is not in the CD, so references to it should be removed.   Remove the reference to constructible_with_allocator_prefix in 30.5.1 Remove paragraph 30.5.7   editor    ACCEPTED  
JP 79 30.5.1   The concept of UsesAllocator and Allocator should be used.   Correct as follows.



template <class R, class Alloc>

struct uses_allocator<promise<R>, Alloc>;

template <class R>

struct constructible_with_allocator_prefix<promise<R> >;



should be



template<class R, Allocator Alloc>

concept_map UsesAllocator<promise<R>, Alloc>;  
LWG  1139  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 331
[192]
30.5.3   Not clear what it means for a public constructor to be 'exposition only'. If the intent is purely to support the library calling this constructor then it can be made private and accessed through friendship. Otherwise it should be documented for public consumption.   Declare the constructor as private with a note about intended friendship, or remove the exposition-only comment and document the semantics.   LWG  1160  ACCEPTED with MODIFICATIONS

Solved by N2997.  
UK 332
[194]
30.5.4   It is not clear without reference to the original proposal how to use a future. In particular, the only way for the user to construct a future is via the promise API which is documented after the presentation of future. Most library clauses feature a small description of their components and intended use, it would be most useful in this case.   Provide a small introductory paragraph, docuenting intended purpose of the future class template and the way futures can only be created via the promise API.   editor    ACCEPTED  
UK 333
[195]
30.5.4 ¶ 5   We expect the complicated 3-signature specifcation for future::get() to be simplified to a single signature with a requires clause by the application of concepts.   Requires fully baked concepts for clause 30   LWG  1139  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
UK 334
[196]
30.5.4 ¶ 5   Behaviour of get() is undefined if calling get() while not is_ready(). The intent is that get() is a blocking call, and will wait for the future to become ready.   Effects: If is_ready() would return false, block on the asynchronous result associated with *this.   LWG  1047  ACCEPTED  
UK 335
[436]
30.5.4   std::unique_future is MoveConstructible, so you can transfer the association with an asynchronous result from one instance to another. However, there is no way to determine whether or not an instance has been moved from, and therefore whether or not it is safe to wait for it. std::promise<int> p; std::unique_future<int> uf(p.get_future()); std::unique_future<int> uf2(std::move(uf)); uf.wait(); // oops, uf has no result to wait for.   Add a "waitable()" function to unique_future (and shared_future) akin to std::thread::joinable(), which returns true if there is an associated result to wait for (whether or not it is ready). Then we can say: if(uf.waitable()) uf.wait();   LWG  1048  ACCEPTED with MODIFICATIONS

Solved by N2997.  
UK 336
[437]
30.5.4   It is possible to transfer ownership of the asynchronous result from one unique_future instance to another via the move-constructor. However, it is not possible to transfer it back, and nor is it possible to create a default-constructed unique_future instance to use as a later move target. This unduly limits the use of unique_future in code. Also, the lack of a move-assignment operator restricts the use of unique_future in containers such as std::vector - vector::insert requires move-assignable for example.   Add a default constructor with the semantics that it creates a unique_future with no associated asynchronous result. Add a move-assignment operator which transfers ownership.   LWG  1161  ACCEPTED with MODIFICATIONS

Solved by N2997.  
JP 80 30.5.4, 30.5.5   Typo, duplicated ">"

"class Period>>"  
Remove one   editor    ACCEPTED  
UK 337
[198]
30.5.5   shared_future should support an efficient move constructor that can avoid unnecessary manipulation of a reference count, much like shared_ptr   Add a move constructor   LWG  1162  ACCEPTED with MODIFICATIONS  
UK 338
[223]
30.5.5   shared_future is currently CopyConstructible, but not CopyAssignable. This is inconsistent with shared_ptr, and will surprise users. Users will then write work-arounds to provide this behaviour. We should provide it simply and efficiently as part of shared_future. Note that since the shared_future member functions for accessing the state are all declared const, the original usage of an immutable shared_future value that can be freely copied by multiple threads can be retained by declaring such an instance as "const shared_future".   Remove "=delete" from the copy-assignment operator of shared_future. Add a move-constructor shared_future(shared_future&& rhs), and a move-assignment operator shared_future& operator=(shared_future&& rhs). The postcondition for the copy-assignment operator is that *this has the same associated state as rhs. The postcondition for the move-constructor and move assignment is that *this has the same associated as rhs had before the constructor/assignment call and that rhs has no associated state.   LWG  1163  ACCEPTED with MODIFICATIONS

Solved by N2997.  
UK 339
[200]
30.5.6 ¶ 6, 7   Move assignment is goiing in the wrong direction, assigning from *this to the passed rvalue, and then returning a reference to an unusable *this   Strike 6. 7 Postcondition: associated state of *this is the same as the associated state of rhs before the call. rhs has no associated state.   LWG  1049  ACCEPTED  
UK 340
[201]
30.5.6 ¶ 11, 12, 13   There is an implied postcondition that the state of the promise is transferred into the future leaving the promise with no associated state. It should be spelled out.   Postcondition: *this has no associated state.   LWG  1050  ACCEPTED  
UK 341
[122]
30.5.6   promise::swap accepts its parameter by lvalue reference. This is inconsistent with other types that provide a swap member function, where those swap functions accept an rvalue reference   Change promise::swap to take an rvalue reference.   LWG  1164  REJECTED  
UK 342
[123]
30.5.6   std::promise is missing a non-member overload of swap. This is inconsistent with other types that provide a swap member function   Add a non-member overload void swap(promise&& x,promise&& y){ x.swap(y); }   LWG  1088  ACCEPTED with MODIFICATIONS

Solved by N2997.  
UK 343
[439]
30.5.6 ¶ 3   The move constructor of a std::promise object does not need to allocate any memory, so the move-construct-with-allocator overload of the constructor is superfluous.   Remove the constructor with the signature template <class Allocator> promise(allocator_arg_t, const Allocator& a, promise& rhs);   LWG  1165  ACCEPTED with MODIFICATIONS  
JP 81 30.5.8   There are not requirements for F and a concept of Allocator dose not use.   Correct as follows.

template <class F>
explicit packaged_task(F f);
template <class F, class Allocator>
explicit packaged_task(allocator_arg_t, const Allocator& a, F f);
template <class F>
explicit packaged_task(F&& f);
template <class F, class Allocator>
explicit packaged_task(allocator_arg_t, const Allocator& a, F&& f);

should be

template <class F>
requires CopyConstructible<F> && Callable<F, ArgTypes...>
&& Convertible<Callable<F, ArgTypes...>::result_type, R>
explicit packaged_task(F f);

template <class F, Allocator Alloc>
requires CopyConstructible<F> && Callable<F, ArgTypes...>
&& Convertible<Callable<F, ArgTypes...>::result_type, R>
explicit packaged_task(allocator_arg_t, const Alloc& a, F f);

template <class F>
requires CopyConstructible<F> && Callable<F, ArgTypes...>
&& Convertible<Callable<F, ArgTypes...>::result_type, R>
explicit packaged_task(F&& f);

template <class F, Allocator Alloc>
requires CopyConstructible<F> && Callable<F, ArgTypes...>
&& Convertible<Callable<F, ArgTypes...>::result_type, R>
explicit packaged_task(allocator_arg_t, const Alloc& a, F&& f);  
LWG  1139  ACCEPTED with MODIFICATIONS

All concepts-related text has been removed from the draft.  
DE 23 Annex B ¶ p2   DE-23 Recursive use of constexpr functions appears to be permitted. Since such functions may be required to be evaluated at compile-time, Annex B "implementation quantities" should specify a maximum depth of recursion.   In Annex B, specify a recursion depth of 256 or a larger value.   CWG  699  ACCEPTED  
DE 24 Annex B ¶ p2   DE-24 The number of placeholders for "bind" is implementation-defined in 20.7.12.1.4, but no minimum is suggested in Annex B.   Add a miminum of 10 placeholders to Annex B.   LWG  922  ACCEPTED with MODIFICATIONS  
DE 25 Annex B ¶ p2   DE-25 Specifying a minimum of 17 recursively nested template instantiations is too small for practical purposes. The limit is too high to effectively limit compiler resource usage, see http://ubiety.uwaterloo.ca/~tveldhui/papers/2003/turing.pdf . The conclusion is that the metric "number of recursively nested template instantiations" is inapposite.   Remove the bullet "Recursively nested template instantiations [17]".   CWG  831  ACCEPTED with MODIFICATIONS  
FR 38 C.2 [diffs.library] ¶ 1   What is ISO/IEC 1990:9899/DAM 1? My guess is that's a typo for ISO/IEC

9899/Amd.1:1995 which I'd have expected to be referenced here (the tables

make reference to things which were introduced by Amd.1).  
One need probably a reference to the document which introduce char16_t and

char32_t in C (ISO/IEC TR 19769:2004?).  
LWG  1155  ACCEPTED  
UK 344
[136]
Appendix D   It is desirable to allow some mechanism to support phasing out of deprecated features in the future. Allowing compilers to implement a mode where deprecated features are not available is a good first step.   Add to the definition of deprecated features permission for compilers to maintain a conditionally supported mode where deprecated features can be disabled, so long as they also default to a mode where all deprecated features are supported.   CWG    REJECTED

Compiler switches and modes are quality-of-implementation issues and outside the scope of the Standard.  
FR 39 Index   Some definitions seem not indexed (such as trivially copyable or sequenced before), indexing them would be useful (and marking specially the page -- say bold or italic -- which reference to the definition would increase the usefulness; having a separate index of all definitions is something which could also be considered).     editor    REJECTED

Index work is ongoing.