Doc. no. N2484=07-0354
Date: 2007-12-09
Project: Programming Language C++
Reply to: Howard Hinnant <howard.hinnant@gmail.com>

C++ Standard Library Closed Issues List (Revision R53)

Reference ISO/IEC IS 14882:1998(E)

Also see:

This document contains only library issues which have been closed by the Library Working Group as duplicates or not defects. That is, issues which have a status of Dup or NAD. See the Library Active Issues List active issues and more information. See the Library Defect Reports List for issues considered defects. The introductory material in that document also applies to this document.

Revision History

Closed Issues


2. Auto_ptr conversions effects incorrect

Section: D.9.1.3 [auto.ptr.conv] Status: NAD Submitter: Nathan Myers Date: 1997-12-04

View all issues with NAD status.

Discussion:

Paragraph 1 in "Effects", says "Calls p->release()" where it clearly must be "Calls p.release()". (As it is, it seems to require using auto_ptr<>::operator-> to refer to X::release, assuming that exists.)

Proposed resolution:

Change 20.4.4.3 [meta.unary.prop] paragraph 1 Effects from "Calls p->release()" to "Calls p.release()".

Rationale:

Not a defect: the proposed change is already found in the standard. [Originally classified as a defect, later reclassified.]


4. Basic_string size_type and difference_type should be implementation defined

Section: 21.3 [basic.string] Status: NAD Submitter: Beman Dawes Date: 1997-11-16

View other active issues in [basic.string].

View all other issues in [basic.string].

View all issues with NAD status.

Discussion:

In Morristown we changed the size_type and difference_type typedefs for all the other containers to implementation defined with a reference to 23.1 [container.requirements]. This should probably also have been done for strings.

Rationale:

Not a defect. [Originally classified as a defect, later reclassified.] basic_string, unlike the other standard library template containers, is severely constrained by its use of char_traits. Those types are dictated by the traits class, and are far from implementation defined.


6. File position not an offset unimplementable

Section: 27.4.3 [fpos] Status: NAD Submitter: Matt Austern Date: 1997-12-15

View all other issues in [fpos].

View all issues with NAD status.

Discussion:

Table 88, in I/O, is too strict; it's unimplementable on systems where a file position isn't just an offset. It also never says just what fpos<> is really supposed to be. [Here's my summary, which Jerry agrees is more or less accurate. "I think I now know what the class really is, at this point: it's a magic cookie that encapsulates an mbstate_t and a file position (possibly represented as an fpos_t), it has syntactic support for pointer-like arithmetic, and implementors are required to have real, not just syntactic, support for arithmetic." This isn't standardese, of course.]

Rationale:

Not a defect. The LWG believes that the Standard is already clear, and that the above summary is what the Standard in effect says.


10. Codecvt<>::do unclear

Section: 22.2.1.5 [locale.codecvt.byname] Status: Dup Submitter: Matt Austern Date: 1998-01-14

View all other issues in [locale.codecvt.byname].

View all issues with Dup status.

Duplicate of: 19

Discussion:

Section 22.2.1.5.2 says that codecvt<>::do_in and do_out should return the value noconv if "no conversion was needed". However, I don't see anything anywhere that defines what it means for a conversion to be needed or not needed. I can think of several circumstances where one might plausibly think that a conversion is not "needed", but I don't know which one is intended here.

Rationale:


12. Way objects hold allocators unclear

Section: 20.1.2 [allocator.requirements] Status: NAD Submitter: Angelika Langer Date: 1998-02-23

View other active issues in [allocator.requirements].

View all other issues in [allocator.requirements].

View all issues with NAD status.

Discussion:

I couldn't find a statement in the standard saying whether the allocator object held by a container is held as a copy of the constructor argument or whether a pointer of reference is maintained internal. There is an according statement for compare objects and how they are maintained by the associative containers, but I couldn't find anything regarding allocators.

Did I overlook it? Is it an open issue or known defect? Or is it deliberately left unspecified?

Rationale:

Not a defect. The LWG believes that the Standard is already clear.  See 23.1 [container.requirements], paragraph 8.


43. Locale table correction

Section: 22.2.1.5 [locale.codecvt.byname] Status: Dup Submitter: Brendan Kehoe Date: 1998-06-01

View all other issues in [locale.codecvt.byname].

View all issues with Dup status.

Duplicate of: 33

Discussion:

Rationale:


45. Stringstreams read/write pointers initial position unclear

Section: 27.7.3 [ostringstream] Status: NAD Submitter: Matthias Mueller Date: 1998-05-27

View all issues with NAD status.

Discussion:

In a comp.lang.c++.moderated Matthias Mueller wrote:

"We are not sure how to interpret the CD2 (see 27.2 [iostream.forward], 27.7.3.1 [ostringstream.cons], 27.7.1.1 [stringbuf.cons]) with respect to the question as to what the correct initial positions of the write and  read pointers of a stringstream should be."

"Is it the same to output two strings or to initialize the stringstream with the first and to output the second?"

[PJ Plauger, Bjarne Stroustrup, Randy Smithey, Sean Corfield, and Jerry Schwarz have all offered opinions; see reflector messages lib-6518, 6519, 6520, 6521, 6523, 6524.]

Rationale:

The LWG believes the Standard is correct as written. The behavior of stringstreams is consistent with fstreams, and there is a constructor which can be used to obtain the desired effect. This behavior is known to be different from strstreams.


58. Extracting a char from a wide-oriented stream

Section: 27.6.1.2.3 [istream::extractors] Status: NAD Submitter: Matt Austern Date: 1998-07-01

View all other issues in [istream::extractors].

View all issues with NAD status.

Discussion:

27.6.1.2.3 has member functions for extraction of signed char and unsigned char, both singly and as strings. However, it doesn't say what it means to extract a char from a basic_streambuf<charT, Traits>.

basic_streambuf, after all, has no members to extract a char, so basic_istream must somehow convert from charT to signed char or unsigned char. The standard doesn't say how it is to perform that conversion.

Rationale:

The Standard is correct as written. There is no such extractor and this is the intent of the LWG.


65. Underspecification of strstreambuf::seekoff

Section: D.7.1.3 [depr.strstreambuf.virtuals] Status: NAD Submitter: Matt Austern Date: 1998-08-18

View all other issues in [depr.strstreambuf.virtuals].

View all issues with NAD status.

Discussion:

The standard says how this member function affects the current stream position. (gptr or pptr) However, it does not say how this member function affects the beginning and end of the get/put area.

This is an issue when seekoff is used to position the get pointer beyond the end of the current read area. (Which is legal. This is implicit in the definition of seekhigh in D.7.1, paragraph 4.)

Rationale:

The LWG agrees that seekoff() is underspecified, but does not wish to invest effort in this deprecated feature.


67. Setw useless for strings

Section: 21.3.8.9 [string.io] Status: Dup Submitter: Steve Clamage Date: 1998-07-09

View all other issues in [string.io].

View all issues with Dup status.

Duplicate of: 25

Discussion:

In a comp.std.c++ posting Michel Michaud wrote: What should be output by:

   string text("Hello");
   cout << '[' << setw(10) << right << text << ']';

Shouldn't it be:

   [     Hello]

Another person replied: Actually, according to the FDIS, the width of the field should be the minimum of width and the length of the string, so the output shouldn't have any padding. I think that this is a typo, however, and that what is wanted is the maximum of the two. (As written, setw is useless for strings. If that had been the intent, one wouldn't expect them to have mentioned using its value.)

It's worth pointing out that this is a recent correction anyway; IIRC, earlier versions of the draft forgot to mention formatting parameters whatsoever.

Rationale:


72. Do_convert phantom member function

Section: 22.2.1.4 [locale.codecvt] Status: Dup Submitter: Nathan Myers Date: 1998-08-24

View all other issues in [locale.codecvt].

View all issues with Dup status.

Duplicate of: 24

Discussion:

In 22.2.1.4 [locale.codecvt] par 3, and in 22.2.1.4.2 [locale.codecvt.virtuals] par 8, a nonexistent member function "do_convert" is mentioned. This member was replaced with "do_in" and "do_out", the proper referents in the contexts above.

Rationale:


73. is_open should be const

Section: 27.8.1 [fstreams] Status: NAD Submitter: Matt Austern Date: 1998-08-27

View all other issues in [fstreams].

View all issues with NAD status.

Discussion:

Classes basic_ifstream, basic_ofstream, and basic_fstream all have a member function is_open. It should be a const member function, since it does nothing but call one of basic_filebuf's const member functions.

Rationale:

Not a defect. This is a deliberate feature; const streams would be meaningless.


77. Valarray operator[] const returning value

Section: 26.5.2.3 [valarray.access] Status: Dup Submitter: Levente Farkas Date: 1998-09-09

View all other issues in [valarray.access].

View all issues with Dup status.

Duplicate of: 389

Discussion:

valarray:

    T operator[] (size_t) const;

why not

    const T& operator[] (size_t) const;

as in vector ???

One can't copy even from a const valarray eg:

    memcpy(ptr, &v[0], v.size() * sizeof(double));

[I] find this bug in valarray is very difficult.

Rationale:

The LWG believes that the interface was deliberately designed that way. That is what valarray was designed to do; that's where the "value array" name comes from. LWG members further comment that "we don't want valarray to be a full STL container." 26.5.2.3 [valarray.access] specifies properties that indicate "an absence of aliasing" for non-constant arrays; this allows optimizations, including special hardware optimizations, that are not otherwise possible.


81. Wrong declaration of slice operations

Section: 26.5.5 [template.slice.array], 26.5.7 [template.gslice.array], 26.5.8 [template.mask.array], 26.5.9 [template.indirect.array] Status: NAD Submitter: Nico Josuttis Date: 1998-09-29

View all other issues in [template.slice.array].

View all issues with NAD status.

Discussion:

Isn't the definition of copy constructor and assignment operators wrong?        Instead of

      slice_array(const slice_array&); 
      slice_array& operator=(const slice_array&);

IMHO they have to be

      slice_array(const slice_array<T>&); 
      slice_array& operator=(const slice_array<T>&);

Same for gslice_array.

Rationale:

Not a defect. The Standard is correct as written.


82. Missing constant for set elements

Section: 23.1.2 [associative.reqmts] Status: NAD Submitter: Nico Josuttis Date: 1998-09-29

View all other issues in [associative.reqmts].

View all issues with NAD status.

Discussion:

Paragraph 5 specifies:

For set and multiset the value type is the same as the key type. For map and multimap it is equal to pair<const Key, T>.

Strictly speaking, this is not correct because for set and multiset the value type is the same as the constant key type.

Rationale:

Not a defect. The Standard is correct as written; it uses a different mechanism (const &) for set and multiset. See issue 103 for a related issue.


84. Ambiguity with string::insert()

Section: 21.3.5 [string.access] Status: NAD Submitter: Nico Josuttis Date: 1998-09-29

View all issues with NAD status.

Discussion:

If I try

    s.insert(0,1,' ');

  I get an nasty ambiguity. It might be

    s.insert((size_type)0,(size_type)1,(charT)' ');

which inserts 1 space character at position 0, or

    s.insert((char*)0,(size_type)1,(charT)' ')

which inserts 1 space character at iterator/address 0 (bingo!), or

    s.insert((char*)0, (InputIterator)1, (InputIterator)' ')

which normally inserts characters from iterator 1 to iterator ' '. But according to 23.1.1.9 (the "do the right thing" fix) it is equivalent to the second. However, it is still ambiguous, because of course I mean the first!

Rationale:

Not a defect. The LWG believes this is a "genetic misfortune" inherent in the design of string and thus not a defect in the Standard as such .


85. String char types

Section: 21 [strings] Status: NAD Submitter: Nico Josuttis Date: 1998-09-29

View all other issues in [strings].

View all issues with NAD status.

Discussion:

The standard seems not to require that charT is equivalent to traits::char_type. So, what happens if charT is not equivalent to traits::char_type?

Rationale:

There is already wording in 21.1 [char.traits] paragraph 3 that requires them to be the same.


87. Error in description of string::compare()

Section: 21.3.6.8 [string::swap] Status: Dup Submitter: Nico Josuttis Date: 1998-09-29

View all other issues in [string::swap].

View all issues with Dup status.

Duplicate of: 5

Discussion:

The following compare() description is obviously a bug:

int compare(size_type pos, size_type n1, 
            charT *s, size_type n2 = npos) const;

because without passing n2 it should compare up to the end of the string instead of comparing npos characters (which throws an exception)

Rationale:


88. Inconsistency between string::insert() and string::append()

Section: 21.3.6.4 [string::insert], 21.3.6.2 [string::append] Status: NAD Submitter: Nico Josuttis Date: 1998-09-29

View all other issues in [string::insert].

View all issues with NAD status.

Discussion:

Why does

  template<class InputIterator> 
       basic_string& append(InputIterator first, InputIterator last);

return a string, while

  template<class InputIterator> 
       void insert(iterator p, InputIterator first, InputIterator last);

returns nothing ?

Rationale:

The LWG believes this stylistic inconsistency is not sufficiently serious to constitute a defect.


89. Missing throw specification for string::insert() and string::replace()

Section: 21.3.6.4 [string::insert], 21.3.6.6 [string::replace] Status: Dup Submitter: Nico Josuttis Date: 1998-09-29

View all other issues in [string::insert].

View all issues with Dup status.

Duplicate of: 83

Discussion:

All insert() and replace() members for strings with an iterator as first argument lack a throw specification. The throw specification should probably be: length_error if size exceeds maximum.

Rationale:

Considered a duplicate because it will be solved by the resolution of issue 83.


93. Incomplete Valarray Subset Definitions

Section: 26.5 [numarray] Status: NAD Submitter: Nico Josuttis Date: 1998-09-29

View all other issues in [numarray].

View all issues with NAD status.

Discussion:

You can easily create subsets, but you can't easily combine them with other subsets. Unfortunately, you almost always needs an explicit type conversion to valarray. This is because the standard does not specify that valarray subsets provide the same operations as valarrays.

For example, to multiply two subsets and assign the result to a third subset, you can't write the following:

va[slice(0,4,3)] = va[slice(1,4,3)] * va[slice(2,4,3)];

Instead, you have to code as follows:

va[slice(0,4,3)] = static_cast<valarray<double> >(va[slice(1,4,3)]) * 
                   static_cast<valarray<double> >(va[slice(2,4,3)]);

This is tedious and error-prone. Even worse, it costs performance because each cast creates a temporary objects, which could be avoided without the cast.

Proposed resolution:

Extend all valarray subset types so that they offer all valarray operations.

Rationale:

This is not a defect in the Standard; it is a request for an extension.


94. May library implementors add template parameters to Standard Library classes?

Section: 17.4.4 [conforming] Status: NAD Submitter: Matt Austern Date: 1998-01-22

View all issues with NAD status.

Discussion:

Is it a permitted extension for library implementors to add template parameters to standard library classes, provided that those extra parameters have defaults? For example, instead of defining template <class T, class Alloc = allocator<T> > class vector; defining it as template <class T, class Alloc = allocator<T>, int N = 1> class vector;

The standard may well already allow this (I can't think of any way that this extension could break a conforming program, considering that users are not permitted to forward-declare standard library components), but it ought to be explicitly permitted or forbidden.

comment from Steve Cleary via comp.std.c++:

I disagree [with the proposed resolution] for the following reason: consider user library code with template template parameters. For example, a user library object may be templated on the type of underlying sequence storage to use (deque/list/vector), since these classes all take the same number and type of template parameters; this would allow the user to determine the performance tradeoffs of the user library object. A similar example is a user library object templated on the type of underlying set storage (set/multiset) or map storage (map/multimap), which would allow users to change (within reason) the semantic meanings of operations on that object.

I think that additional template parameters should be forbidden in the Standard classes. Library writers don't lose any expressive power, and can still offer extensions because additional template parameters may be provided by a non-Standard implementation class:

 
   template <class T, class Allocator = allocator<T>, int N = 1>
   class __vector
   { ... };
   template <class T, class Allocator = allocator<T> >
   class vector: public __vector<T, Allocator>
   { ... };

Proposed resolution:

Add a new subclause [presumably 17.4.4.9] following 17.4.4.8 [res.on.exception.handling]:

17.4.4.9 Template Parameters

A specialization of a template class described in the C++ Standard Library behaves the same as if the implementation declares no additional template parameters.

Footnote: Additional template parameters with default values are thus permitted.

Add "template parameters" to the list of subclauses at the end of 17.4.4 [conforming] paragraph 1.

[Kona: The LWG agreed the standard needs clarification. After discussion with John Spicer, it seems added template parameters can be detected by a program using template-template parameters. A straw vote - "should implementors be allowed to add template parameters?" found no consensus ; 5 - yes, 7 - no.]

Rationale:

There is no ambiguity; the standard is clear as written. Library implementors are not permitted to add template parameters to standard library classes. This does not fall under the "as if" rule, so it would be permitted only if the standard gave explicit license for implementors to do this. This would require a change in the standard.

The LWG decided against making this change, because it would break user code involving template template parameters or specializations of standard library class templates.


95. Members added by the implementation

Section: 17.4.4.4 [member.functions] Status: NAD Submitter: AFNOR Date: 1998-10-07

View all issues with NAD status.

Discussion:

In 17.3.4.4/2 vs 17.3.4.7/0 there is a hole; an implementation could add virtual members a base class and break user derived classes.

Example:

// implementation code:
struct _Base { // _Base is in the implementer namespace
        virtual void foo ();
};
class vector : _Base // deriving from a class is allowed
{ ... };

// user code:
class vector_checking : public vector 
{
        void foo (); // don't want to override _Base::foo () as the 
                     // user doesn't know about _Base::foo ()
};

Proposed resolution:

Clarify the wording to make the example illegal.

Rationale:

This is not a defect in the Standard.  The example is already illegal.  See 17.4.4.4 [member.functions] paragraph 2.


97. Insert inconsistent definition

Section: 23 [containers] Status: NAD Submitter: AFNOR Date: 1998-10-07

View all other issues in [containers].

View all issues with NAD status.

Discussion:

insert(iterator, const value_type&) is defined both on sequences and on set, with unrelated semantics: insert here (in sequences), and insert with hint (in associative containers). They should have different names (B.S. says: do not abuse overloading).

Rationale:

This is not a defect in the Standard. It is a genetic misfortune of the design, for better or for worse.


99. Reverse_iterator comparisons completely wrong

Section: 24.4.1.3.13 [reverse.iter.op==] Status: NAD Submitter: AFNOR Date: 1998-10-07

View all issues with NAD status.

Discussion:

The <, >, <=, >= comparison operator are wrong: they return the opposite of what they should.

Note: same problem in CD2, these were not even defined in CD1. SGI STL code is correct; this problem is known since the Morristown meeting but there it was too late

Rationale:

This is not a defect in the Standard. A careful reading shows the Standard is correct as written. A review of several implementations show that they implement exactly what the Standard says.


100. Insert iterators/ostream_iterators overconstrained

Section: 24.4.2 [insert.iterators], 24.5.4 [ostreambuf.iterator] Status: NAD Submitter: AFNOR Date: 1998-10-07

View all issues with NAD status.

Discussion:

Overspecified For an insert iterator it, the expression *it is required to return a reference to it. This is a simple possible implementation, but as the SGI STL documentation says, not the only one, and the user should not assume that this is the case.

Rationale:

The LWG believes this causes no harm and is not a defect in the standard. The only example anyone could come up with caused some incorrect code to work, rather than the other way around.


101. No way to free storage for vector and deque

Section: 23.2.5 [vector], 23.2.1 [array] Status: NAD Submitter: AFNOR Date: 1998-10-07

View other active issues in [vector].

View all other issues in [vector].

View all issues with NAD status.

Discussion:

Reserve can not free storage, unlike string::reserve

Rationale:

This is not a defect in the Standard. The LWG has considered this issue in the past and sees no need to change the Standard. Deque has no reserve() member function. For vector, shrink-to-fit can be expressed in a single line of code (where v is vector<T>):

vector<T>(v).swap(v);  // shrink-to-fit v


102. Bug in insert range in associative containers

Section: 23.1.2 [associative.reqmts] Status: Dup Submitter: AFNOR Date: 1998-10-07

View all other issues in [associative.reqmts].

View all issues with Dup status.

Duplicate of: 264

Discussion:

Table 69 of Containers say that a.insert(i,j) is linear if [i, j) is ordered. It seems impossible to implement, as it means that if [i, j) = [x], insert in an associative container is O(1)!

Proposed resolution:

N+log (size()) if [i,j) is sorted according to value_comp()

Rationale:

Subsumed by issue 264.


104. Description of basic_string::operator[] is unclear

Section: 21.3.4 [string.capacity] Status: NAD Submitter: AFNOR Date: 1998-10-07

View all other issues in [string.capacity].

View all issues with NAD status.

Discussion:

It is not clear that undefined behavior applies when pos == size () for the non const version.

Proposed resolution:

Rewrite as: Otherwise, if pos > size () or pos == size () and the non-const version is used, then the behavior is undefined.

Rationale:

The Standard is correct. The proposed resolution already appears in the Standard.


105. fstream ctors argument types desired

Section: 27.8 [file.streams] Status: NAD Future Submitter: AFNOR Date: 1998-10-07

View all issues with NAD Future status.

Discussion:

fstream ctors take a const char* instead of string.
fstream ctors can't take wchar_t

An extension to add a const wchar_t* to fstream would make the implementation non conforming.

Rationale:

This is not a defect in the Standard. It might be an interesting extension for the next Standard.


107. Valarray constructor is strange

Section: 26.5.2 [template.valarray] Status: NAD Submitter: AFNOR Date: 1998-10-07

View all other issues in [template.valarray].

View all issues with NAD status.

Discussion:

The order of the arguments is (elem, size) instead of the normal (size, elem) in the rest of the library. Since elem often has an integral or floating point type, both types are convertible to each other and reversing them leads to a well formed program.

Proposed resolution:

Inverting the arguments could silently break programs. Introduce the two signatures (const T&, size_t) and (size_t, const T&), but make the one we do not want private so errors result in a diagnosed access violation. This technique can also be applied to STL containers.

Rationale:

The LWG believes that while the order of arguments is unfortunate, it does not constitute a defect in the standard. The LWG believes that the proposed solution will not work for valarray<size_t> and perhaps other cases.


111. istreambuf_iterator::equal overspecified, inefficient

Section: 24.5.3.5 [istreambuf.iterator::equal] Status: NAD Future Submitter: Nathan Myers Date: 1998-10-15

View all issues with NAD Future status.

Discussion:

The member istreambuf_iterator<>::equal is specified to be unnecessarily inefficient. While this does not affect the efficiency of conforming implementations of iostreams, because they can "reach into" the iterators and bypass this function, it does affect users who use istreambuf_iterators.

The inefficiency results from a too-scrupulous definition, which requires a "true" result if neither iterator is at eof. In practice these iterators can only usefully be compared with the "eof" value, so the extra test implied provides no benefit, but slows down users' code.

The solution is to weaken the requirement on the function to return true only if both iterators are at eof.

Proposed resolution:

Replace 24.5.3.5 [istreambuf.iterator::equal], paragraph 1,

-1- Returns: true if and only if both iterators are at end-of-stream, or neither is at end-of-stream, regardless of what streambuf object they use.

with

-1- Returns: true if and only if both iterators are at end-of-stream, regardless of what streambuf object they use.

Rationale:

It is not clear that this is a genuine defect. Additionally, the LWG was reluctant to make a change that would result in operator== not being a equivalence relation. One consequence of this change is that an algorithm that's passed the range [i, i) would no longer treat it as an empty range.


113. Missing/extra iostream sync semantics

Section: 27.6.1.1 [istream], 27.6.1.3 [istream.unformatted] Status: NAD Submitter: Steve Clamage Date: 1998-10-13

View all other issues in [istream].

View all issues with NAD status.

Discussion:

In 27.6.1.1, class basic_istream has a member function sync, described in 27.6.1.3, paragraph 36.

Following the chain of definitions, I find that the various sync functions have defined semantics for output streams, but no semantics for input streams. On the other hand, basic_ostream has no sync function.

The sync function should at minimum be added to basic_ostream, for internal consistency.

A larger question is whether sync should have assigned semantics for input streams.

Classic iostreams said streambuf::sync flushes pending output and attempts to return unread input characters to the source. It is a protected member function. The filebuf version (which is public) has that behavior (it backs up the read pointer). Class strstreambuf does not override streambuf::sync, and so sync can't be called on a strstream.

If we can add corresponding semantics to the various sync functions, we should. If not, we should remove sync from basic_istream.

Rationale:

A sync function is not needed in basic_ostream because the flush function provides the desired functionality.

As for the other points, the LWG finds the standard correct as written.


116. bitset cannot be constructed with a const char*

Section: 23.3.5 [template.bitset] Status: NAD Future Submitter: Judy Ward Date: 1998-11-06

View other active issues in [template.bitset].

View all other issues in [template.bitset].

View all issues with NAD Future status.

Discussion:

The following code does not compile with the EDG compiler:

#include <bitset>
using namespace std;
bitset<32> b("111111111");

If you cast the ctor argument to a string, i.e.:

bitset<32> b(string("111111111"));

then it will compile. The reason is that bitset has the following templatized constructor:

template <class charT, class traits, class Allocator>
explicit bitset (const basic_string<charT, traits, Allocator>& str, ...);

According to the compiler vendor, Steve Adamcyk at EDG, the user cannot pass this template constructor a const char* and expect a conversion to basic_string. The reason is "When you have a template constructor, it can get used in contexts where type deduction can be done. Type deduction basically comes up with exact matches, not ones involving conversions."

I don't think the intention when this constructor became templatized was for construction from a const char* to no longer work.

Proposed resolution:

Add to 23.3.5 [template.bitset] a bitset constructor declaration

explicit bitset(const char*);

and in Section 23.3.5.1 [bitset.cons] add:

explicit bitset(const char* str);

Effects:
    Calls bitset((string) str, 0, string::npos);

Rationale:

Although the problem is real, the standard is designed that way so it is not a defect. Education is the immediate workaround. A future standard may wish to consider the Proposed Resolution as an extension.


121. Detailed definition for ctype<wchar_t> specialization

Section: 22.1.1.1.1 [locale.category] Status: NAD Submitter: Judy Ward Date: 1998-12-15

View all other issues in [locale.category].

View all issues with NAD status.

Discussion:

Section 22.1.1.1.1 has the following listed in Table 51: ctype<char> , ctype<wchar_t>.

Also Section 22.2.1.1 [locale.ctype] says:

The instantiations required in Table 51 (22.1.1.1.1) namely ctype<char> and ctype<wchar_t> , implement character classing appropriate to the implementation's native character set.

However, Section 22.2.1.3 [facet.ctype.special] only has a detailed description of the ctype<char> specialization, not the ctype<wchar_t> specialization.

Proposed resolution:

Add the ctype<wchar_t> detailed class description to Section 22.2.1.3 [facet.ctype.special].

Rationale:

Specialization for wchar_t is not needed since the default is acceptable.


128. Need open_mode() function for file stream, string streams, file buffers, and string  buffers

Section: 27.7 [string.streams], 27.8 [file.streams] Status: NAD Future Submitter: Angelika Langer Date: 1999-02-22

View all other issues in [string.streams].

View all issues with NAD Future status.

Discussion:

The following question came from Thorsten Herlemann:

You can set a mode when constructing or opening a file-stream or filebuf, e.g. ios::in, ios::out, ios::binary, ... But how can I get that mode later on, e.g. in my own operator << or operator >> or when I want to check whether a file-stream or file-buffer object passed as parameter is opened for input or output or binary? Is there no possibility? Is this a design-error in the standard C++ library?

It is indeed impossible to find out what a stream's or stream buffer's open mode is, and without that knowledge you don't know how certain operations behave. Just think of the append mode.

Both streams and stream buffers should have a mode() function that returns the current open mode setting.

Proposed resolution:

For stream buffers, add a function to the base class as a non-virtual function qualified as const to 27.5.2 [streambuf]:

    openmode mode() const;

    Returns the current open mode.

With streams, I'm not sure what to suggest. In principle, the mode could already be returned by ios_base, but the mode is only initialized for file and string stream objects, unless I'm overlooking anything. For this reason it should be added to the most derived stream classes. Alternatively, it could be added to basic_ios and would be default initialized in basic_ios<>::init().

Rationale:

This might be an interesting extension for some future, but it is not a defect in the current standard. The Proposed Resolution is retained for future reference.


131. list::splice throws nothing

Section: 23.2.3.4 [list.ops] Status: NAD Submitter: Howard Hinnant Date: 1999-03-06

View all other issues in [list.ops].

View all issues with NAD status.

Discussion:

What happens if a splice operation causes the size() of a list to grow beyond max_size()?

Rationale:

Size() cannot grow beyond max_size(). 


135. basic_iostream doubly initialized

Section: 27.6.1.5.1 [iostream.cons] Status: NAD Submitter: Howard Hinnant Date: 1999-03-06

View all issues with NAD status.

Discussion:

-1- Effects Constructs an object of class basic_iostream, assigning initial values to the base classes by calling basic_istream<charT,traits>(sb) (lib.istream) and basic_ostream<charT,traits>(sb) (lib.ostream)

The called for basic_istream and basic_ostream constructors call init(sb). This means that the basic_iostream's virtual base class is initialized twice.

Proposed resolution:

Change 27.6.1.5.1, paragraph 1 to:

-1- Effects Constructs an object of class basic_iostream, assigning initial values to the base classes by calling basic_istream<charT,traits>(sb) (lib.istream).

Rationale:

The LWG agreed that the init() function is called twice, but said that this is harmless and so not a defect in the standard.


138. Class ctype_byname<char> redundant and misleading

Section: 22.2.1.4 [locale.codecvt] Status: NAD Future Submitter: Angelika Langer Date: 1999-03-18

View all other issues in [locale.codecvt].

View all issues with NAD Future status.

Discussion:

Section 22.2.1.4 [locale.codecvt] specifies that ctype_byname<char> must be a specialization of the ctype_byname template.

It is common practice in the standard that specializations of class templates are only mentioned where the interface of the specialization deviates from the interface of the template that it is a specialization of. Otherwise, the fact whether or not a required instantiation is an actual instantiation or a specialization is left open as an implementation detail.

Clause 22.2.1.4 deviates from that practice and for that reason is misleading. The fact, that ctype_byname<char> is specified as a specialization suggests that there must be something "special" about it, but it has the exact same interface as the ctype_byname template. Clause 22.2.1.4 does not have any explanatory value, is at best redundant, at worst misleading - unless I am missing anything.

Naturally, an implementation will most likely implement ctype_byname<char> as a specialization, because the base class ctype<char> is a specialization with an interface different from the ctype template, but that's an implementation detail and need not be mentioned in the standard.

Rationale:

The standard as written is mildly misleading, but the correct fix is to deal with the underlying problem in the ctype_byname base class, not in the specialization. See issue 228.


140. map<Key, T>::value_type does not satisfy the assignable requirement

Section: 23.3.1 [map] Status: NAD Future Submitter: Mark Mitchell Date: 1999-04-14

View all other issues in [map].

View all issues with NAD Future status.

Discussion:

23.1 [container.requirements]

expression         return type      pre/post-condition
-------------     -----------      -------------------
X::value_type    T                    T is assignable

23.3.1 [map]

A map satisfies all the requirements of a container.

For a map<Key, T> ... the value_type is pair<const Key, T>.

There's a contradiction here. In particular, `pair<const Key, T>' is not assignable; the `const Key' cannot be assigned to. So,  map<Key, T>::value_type does not satisfy the assignable requirement imposed by a container.

[See issue 103 for the slightly related issue of modification of set keys.]

Rationale:

The LWG believes that the standard is inconsistent, but that this is a design problem rather than a strict defect. May wish to reconsider for the next standard.


143. C .h header wording unclear

Section: D.5 [depr.c.headers] Status: NAD Submitter: Christophe de Dinechin Date: 1999-05-04

View all issues with NAD status.

Discussion:

[depr.c.headers] paragraph 2 reads:

Each C header, whose name has the form name.h, behaves as if each name placed in the Standard library namespace by the corresponding cname header is also placed within the namespace scope of the namespace std and is followed by an explicit using-declaration (_namespace.udecl_)

I think it should mention the global name space somewhere...  Currently, it indicates that name placed in std is also placed in std...

I don't know what is the correct wording. For instance, if struct tm is defined in time.h, ctime declares std::tm. However, the current wording seems ambiguous regarding which of the following would occur for use of both ctime and time.h:

// version 1:
namespace std {
        struct tm { ... };
}
using std::tm;

// version 2:
struct tm { ... };
namespace std {
        using ::tm;
}

// version 3:
struct tm { ... };
namespace std {
        struct tm { ... };
}

I think version 1 is intended.

[Kona: The LWG agreed that the wording is not clear. It also agreed that version 1 is intended, version 2 is not equivalent to version 1, and version 3 is clearly not intended. The example below was constructed by Nathan Myers to illustrate why version 2 is not equivalent to version 1.

Although not equivalent, the LWG is unsure if (2) is enough of a problem to be prohibited. Points discussed in favor of allowing (2):

]

Example:

#include <time.h>
#include <utility>

int main() {
    std::tm * t;
    make_pair( t, t ); // okay with version 1 due to Koenig lookup
                       // fails with version 2; make_pair not found
    return 0;
}

Proposed resolution:

Replace D.5 [depr.c.headers] paragraph 2 with:

Each C header, whose name has the form name.h, behaves as if each name placed in the Standard library namespace by the corresponding cname header is also placed within the namespace scope of the namespace std by name.h and is followed by an explicit using-declaration (_namespace.udecl_) in global scope.

Rationale:

The current wording in the standard is the result of a difficult compromise that averted delay of the standard. Based on discussions in Tokyo it is clear that there is no still no consensus on stricter wording, so the issue has been closed. It is suggested that users not write code that depends on Koenig lookup of C library functions.


145. adjustfield lacks default value

Section: 27.4.4.1 [basic.ios.cons] Status: NAD Submitter: Angelika Langer Date: 1999-05-12

View all other issues in [basic.ios.cons].

View all issues with NAD status.

Discussion:

There is no initial value for the adjustfield defined, although many people believe that the default adjustment were right. This is a common misunderstanding. The standard only defines that, if no adjustment is specified, all the predefined inserters must add fill characters before the actual value, which is "as if" the right flag were set. The flag itself need not be set.

When you implement a user-defined inserter you cannot rely on right being the default setting for the adjustfield. Instead, you must be prepared to find none of the flags set and must keep in mind that in this case you should make your inserter behave "as if" the right flag were set. This is surprising to many people and complicates matters more than necessary.

Unless there is a good reason why the adjustfield should not be initialized I would suggest to give it the default value that everybody expects anyway.

Rationale:

This is not a defect. It is deliberate that the default is no bits set. Consider Arabic or Hebrew, for example. See 22.2.2.2.2 [facet.num.put.virtuals] paragraph 19, Table 61 - Fill padding.


149. Insert should return iterator to first element inserted

Section: 23.1.1 [sequence.reqmts] Status: NAD Future Submitter: Andrew Koenig Date: 1999-06-28

View all other issues in [sequence.reqmts].

View all issues with NAD Future status.

Discussion:

Suppose that c and c1 are sequential containers and i is an iterator that refers to an element of c. Then I can insert a copy of c1's elements into c ahead of element i by executing

c.insert(i, c1.begin(), c1.end());

If c is a vector, it is fairly easy for me to find out where the newly inserted elements are, even though i is now invalid:

size_t i_loc = i - c.begin();
c.insert(i, c1.begin(), c1.end());

and now the first inserted element is at c.begin()+i_loc and one past the last is at c.begin()+i_loc+c1.size().

But what if c is a list? I can still find the location of one past the last inserted element, because i is still valid. To find the location of the first inserted element, though, I must execute something like

for (size_t n = c1.size(); n; --n)
   --i;

because i is now no longer a random-access iterator.

Alternatively, I might write something like

bool first = i == c.begin();
list<T>::iterator j = i;
if (!first) --j;
c.insert(i, c1.begin(), c1.end());
if (first)
   j = c.begin();
else
   ++j;

which, although wretched, requires less overhead.

But I think the right solution is to change the definition of insert so that instead of returning void, it returns an iterator that refers to the first element inserted, if any, and otherwise is a copy of its first argument. 

Rationale:

The LWG believes this was an intentional design decision and so is not a defect. It may be worth revisiting for the next standard.


157. Meaningless error handling for pword() and iword()

Section: 27.4.2.5 [ios.base.storage] Status: Dup Submitter: Dietmar Kühl Date: 1999-07-20

View all other issues in [ios.base.storage].

View all issues with Dup status.

Duplicate of: 41

Discussion:

According to paragraphs 2 and 4 of 27.4.2.5 [ios.base.storage], the functions iword() and pword() "set the badbit (which might throw an exception)" on failure. ... but what does it mean for ios_base to set the badbit? The state facilities of the IOStream library are defined in basic_ios, a derived class! It would be possible to attempt a down cast but then it would be necessary to know the character type used...

Rationale:


162. Really "formatted input functions"?

Section: 27.6.1.2.3 [istream::extractors] Status: Dup Submitter: Dietmar Kühl Date: 1999-07-20

View all other issues in [istream::extractors].

View all issues with Dup status.

Duplicate of: 60

Discussion:

It appears to be somewhat nonsensical to consider the functions defined in the paragraphs 1 to 5 to be "Formatted input function" but since these functions are defined in a section labeled "Formatted input functions" it is unclear to me whether these operators are considered formatted input functions which have to conform to the "common requirements" from 27.6.1.2.1 [istream.formatted.reqmts]: If this is the case, all manipulators, not just ws, would skip whitespace unless noskipws is set (... but setting noskipws using the manipulator syntax would also skip whitespace :-)

See also issue 166 for the same problem in formatted output

Rationale:


163. Return of gcount() after a call to gcount

Section: 27.6.1.3 [istream.unformatted] Status: Dup Submitter: Dietmar Kühl Date: 1999-07-20

View all other issues in [istream.unformatted].

View all issues with Dup status.

Duplicate of: 60

Discussion:

It is not clear which functions are to be considered unformatted input functions. As written, it seems that all functions in 27.6.1.3 [istream.unformatted] are unformatted input functions. However, it does not really make much sense to construct a sentry object for gcount(), sync(), ... Also it is unclear what happens to the gcount() if eg. gcount(), putback(), unget(), or sync() is called: These functions don't extract characters, some of them even "unextract" a character. Should this still be reflected in gcount()? Of course, it could be read as if after a call to gcount() gcount() return 0 (the last unformatted input function, gcount(), didn't extract any character) and after a call to putback() gcount() returns -1 (the last unformatted input function putback() did "extract" back into the stream). Correspondingly for unget(). Is this what is intended? If so, this should be clarified. Otherwise, a corresponding clarification should be used.

Rationale:


166. Really "formatted output functions"?

Section: 27.6.2.6.3 [ostream.inserters] Status: Dup Submitter: Dietmar Kühl Date: 1999-07-20

View all issues with Dup status.

Duplicate of: 60

Discussion:

From 27.6.2.6.1 [ostream.formatted.reqmts] it appears that all the functions defined in 27.6.2.6.3 [ostream.inserters] have to construct a sentry object. Is this really intended?

This is basically the same problem as issue 162 but for output instead of input.

Rationale:


177. Complex operators cannot be explicitly instantiated

Section: 26.3.6 [complex.ops] Status: NAD Submitter: Judy Ward Date: 1999-07-02

View all other issues in [complex.ops].

View all issues with NAD status.

Discussion:

A user who tries to explicitly instantiate a complex non-member operator will get compilation errors. Below is a simplified example of the reason why. The problem is that iterator_traits cannot be instantiated on a non-pointer type like float, yet when the compiler is trying to decide which operator+ needs to be instantiated it must instantiate the declaration to figure out the first argument type of a reverse_iterator operator.

namespace std {
template <class Iterator> 
struct iterator_traits
{
    typedef typename Iterator::value_type value_type;
};

template <class T> class reverse_iterator;

// reverse_iterator operator+
template <class T> 
reverse_iterator<T> operator+
(typename iterator_traits<T>::difference_type, const reverse_iterator<T>&);

template <class T> struct complex {};

// complex operator +
template <class T>
complex<T> operator+ (const T& lhs, const complex<T>& rhs) 
{ return complex<T>();} 
}

// request for explicit instantiation
template std::complex<float> std::operator+<float>(const float&, 
     const std::complex<float>&);

See also c++-stdlib reflector messages: lib-6814, 6815, 6816.

Rationale:

Implementors can make minor changes and the example will work. Users are not affected in any case.

According to John Spicer, It is possible to explicitly instantiate these operators using different syntax: change "std::operator+<float>" to "std::operator+".

The proposed resolution of issue 120 is that users will not be able to explicitly instantiate standard library templates. If that resolution is accepted then library implementors will be the only ones that will be affected by this problem, and they must use the indicated syntax.


178. Should clog and cerr initially be tied to cout?

Section: 27.3.1 [narrow.stream.objects] Status: NAD Submitter: Judy Ward Date: 1999-07-02

View all other issues in [narrow.stream.objects].

View all issues with NAD status.

Discussion:

Section 27.3.1 says "After the object cerr is initialized, cerr.flags() & unitbuf is nonzero. Its state is otherwise the same as required for ios_base::init (lib.basic.ios.cons). It doesn't say anything about the the state of clog. So this means that calling cerr.tie() and clog.tie() should return 0 (see Table 89 for ios_base::init effects).

Neither of the popular standard library implementations that I tried does this, they both tie cerr and clog to &cout. I would think that would be what users expect.

Rationale:

The standard is clear as written.

27.3.1/5 says that "After the object cerr is initialized, cerr.flags() & unitbuf is nonzero. Its state is otherwise the same as required for ios_base::init (27.4.4.1)." Table 89 in 27.4.4.1, which gives the postconditions of basic_ios::init(), says that tie() is 0. (Other issues correct ios_base::init to basic_ios::init().)


180. Container member iterator arguments constness has unintended consequences

Section: 23 [containers] Status: NAD Future Submitter: Dave Abrahams Date: 1999-07-01

View all other issues in [containers].

View all issues with NAD Future status.

Discussion:

It is the constness of the container which should control whether it can be modified through a member function such as erase(), not the constness of the iterators. The iterators only serve to give positioning information.

Here's a simple and typical example problem which is currently very difficult or impossible to solve without the change proposed below.

Wrap a standard container C in a class W which allows clients to find and read (but not modify) a subrange of (C.begin(), C.end()]. The only modification clients are allowed to make to elements in this subrange is to erase them from C through the use of a member function of W.

Proposed resolution:

Change all non-const iterator parameters of standard library container member functions to accept const_iterator parameters. Note that this change applies to all library clauses, including strings.

For example, in 21.3.5.5 change:

       iterator erase(iterator p);

to:
       iterator erase(const_iterator p);

Rationale:

The issue was discussed at length. It was generally agreed that 1) There is no major technical argument against the change (although there is a minor argument that some obscure programs may break), and 2) Such a change would not break const correctness. The concerns about making the change were 1) it is user detectable (although only in boundary cases), 2) it changes a large number of signatures, and 3) it seems more of a design issue that an out-and-out defect.

The LWG believes that this issue should be considered as part of a general review of const issues for the next revision of the standard. Also see issue 200.


188. valarray helpers missing augmented assignment operators

Section: 26.5.2.6 [valarray.cassign] Status: NAD Future Submitter: Gabriel Dos Reis Date: 1999-08-15

View all issues with NAD Future status.

Discussion:

26.5.2.6 defines augmented assignment operators valarray<T>::op=(const T&), but fails to provide corresponding versions for the helper classes. Thus making the following illegal:

#include <valarray>

int main()
{
std::valarray<double> v(3.14, 1999);

v[99] *= 2.0; // Ok

std::slice s(0, 50, 2);

v[s] *= 2.0; // ERROR
}

I can't understand the intent of that omission. It makes the valarray library less intuitive and less useful.

Rationale:

Although perhaps an unfortunate design decision, the omission is not a defect in the current standard.  A future standard may wish to add the missing operators.


190. min() and max() functions should be std::binary_functions

Section: 25.3.7 [alg.min.max] Status: NAD Future Submitter: Mark Rintoul Date: 1999-08-26

View all other issues in [alg.min.max].

View all issues with NAD Future status.

Discussion:

Both std::min and std::max are defined as template functions. This is very different than the definition of std::plus (and similar structs) which are defined as function objects which inherit std::binary_function.

This lack of inheritance leaves std::min and std::max somewhat useless in standard library algorithms which require a function object that inherits std::binary_function.

Rationale:

Although perhaps an unfortunate design decision, the omission is not a defect in the current standard.  A future standard may wish to consider additional function objects.


191. Unclear complexity for algorithms such as binary search

Section: 25.3.3 [alg.binary.search] Status: NAD Submitter: Nico Josuttis Date: 1999-10-10

View all other issues in [alg.binary.search].

View all issues with NAD status.

Discussion:

The complexity of binary_search() is stated as "At most log(last-first) + 2 comparisons", which seems to say that the algorithm has logarithmic complexity. However, this algorithms is defined for forward iterators. And for forward iterators, the need to step element-by-element results into linear complexity. But such a statement is missing in the standard. The same applies to lower_bound(), upper_bound(), and equal_range(). 

However, strictly speaking the standard contains no bug here. So this might considered to be a clarification or improvement.

Rationale:

The complexity is expressed in terms of comparisons, and that complexity can be met even if the number of iterators accessed is linear. Paragraph 1 already says exactly what happens to iterators.


192. a.insert(p,t) is inefficient and overconstrained

Section: 23.1.2 [associative.reqmts] Status: NAD Submitter: Ed Brey Date: 1999-06-06

View all other issues in [associative.reqmts].

View all issues with NAD status.

Duplicate of: 233

Discussion:

As defined in 23.1.2, paragraph 7 (table 69), a.insert(p,t) suffers from several problems:

expression return type pre/post-condition complexity
a.insert(p,t) iterator inserts t if and only if there is no element with key equivalent to the key of t in containers with unique keys; always inserts t in containers with equivalent keys. always returns the iterator pointing to the element with key equivalent to the key of t . iterator p is a hint pointing to where the insert should start to search. logarithmic in general, but amortized constant if t is inserted right after p .

1. For a container with unique keys, only logarithmic complexity is guaranteed if no element is inserted, even though constant complexity is always possible if p points to an element equivalent to t.

2. For a container with equivalent keys, the amortized constant complexity guarantee is only useful if no key equivalent to t exists in the container. Otherwise, the insertion could occur in one of multiple locations, at least one of which would not be right after p.

3. By guaranteeing amortized constant complexity only when t is inserted after p, it is impossible to guarantee constant complexity if t is inserted at the beginning of the container. Such a problem would not exist if amortized constant complexity was guaranteed if t is inserted before p, since there is always some p immediately before which an insert can take place.

4. For a container with equivalent keys, p does not allow specification of where to insert the element, but rather only acts as a hint for improving performance. This negates the added functionality that p would provide if it specified where within a sequence of equivalent keys the insertion should occur. Specifying the insert location provides more control to the user, while providing no disadvantage to the container implementation.

Proposed resolution:

In 23.1.2 [associative.reqmts] paragraph 7, replace the row in table 69 for a.insert(p,t) with the following two rows:

expression return type pre/post-condition complexity
a_uniq.insert(p,t) iterator inserts t if and only if there is no element with key equivalent to the key of t. returns the iterator pointing to the element with key equivalent to the key of t. logarithmic in general, but amortized constant if t is inserted right before p or p points to an element with key equivalent to t.
a_eq.insert(p,t) iterator inserts t and returns the iterator pointing to the newly inserted element. t is inserted right before p if doing so preserves the container ordering. logarithmic in general, but amortized constant if t is inserted right before p.

Rationale:

Too big a change.  Furthermore, implementors report checking both before p and after p, and don't want to change this behavior.


194. rdbuf() functions poorly specified

Section: 27.4.4 [ios] Status: NAD Submitter: Steve Clamage Date: 1999-09-07

View all issues with NAD status.

Discussion:

In classic iostreams, base class ios had an rdbuf function that returned a pointer to the associated streambuf. Each derived class had its own rdbuf function that returned a pointer of a type reflecting the actual type derived from streambuf. Because in ARM C++, virtual function overrides had to have the same return type, rdbuf could not be virtual.

In standard iostreams, we retain the non-virtual rdbuf function design, and in addition have an overloaded rdbuf function that sets the buffer pointer. There is no need for the second function to be virtual nor to be implemented in derived classes.

Minor question: Was there a specific reason not to make the original rdbuf function virtual?

Major problem: Friendly compilers warn about functions in derived classes that hide base-class overloads. Any standard implementation of iostreams will result in such a warning on each of the iostream classes, because of the ill-considered decision to overload rdbuf only in a base class.

In addition, users of the second rdbuf function must use explicit qualification or a cast to call it from derived classes. An explicit qualification or cast to basic_ios would prevent access to any later overriding version if there was one.

What I'd like to do in an implementation is add a using- declaration for the second rdbuf function in each derived class. It would eliminate warnings about hiding functions, and would enable access without using explicit qualification. Such a change I don't think would change the behavior of any valid program, but would allow invalid programs to compile:

 filebuf mybuf;
 fstream f;
 f.rdbuf(mybuf); // should be an error, no visible rdbuf

I'd like to suggest this problem as a defect, with the proposed resolution to require the equivalent of a using-declaration for the rdbuf function that is not replaced in a later derived class. We could discuss whether replacing the function should be allowed.

Rationale:

For historical reasons, the standard is correct as written. There is a subtle difference between the base class rdbuf() and derived class rdbuf(). The derived class rdbuf() always returns the original streambuf, whereas the base class rdbuf() will return the "current streambuf" if that has been changed by the variant you mention.

Permission is not required to add such an extension. See 17.4.4.4 [member.functions].


196. Placement new example has alignment problems

Section: 18.5.1.3 [new.delete.placement] Status: Dup Submitter: Herb Sutter Date: 1998-12-15

View all other issues in [new.delete.placement].

View all issues with Dup status.

Duplicate of: 114

Discussion:

The example in 18.5.1.3 [new.delete.placement] paragraph 4 reads:

[Example: This can be useful for constructing an object at a known address:

   char place[sizeof(Something)];
   Something* p = new (place) Something();

end example]

This example has potential alignment problems.

Rationale:


197. max_size() underspecified

Section: 20.1.2 [allocator.requirements], 23.1 [container.requirements] Status: NAD Submitter: Andy Sawyer Date: 1999-10-21

View other active issues in [allocator.requirements].

View all other issues in [allocator.requirements].

View all issues with NAD status.

Discussion:

Must the value returned by max_size() be unchanged from call to call?

Must the value returned from max_size() be meaningful?

Possible meanings identified in lib-6827:

1) The largest container the implementation can support given "best case" conditions - i.e. assume the run-time platform is "configured to the max", and no overhead from the program itself. This may possibly be determined at the point the library is written, but certainly no later than compile time.

2) The largest container the program could create, given "best case" conditions - i.e. same platform assumptions as (1), but take into account any overhead for executing the program itself. (or, roughly "storage=storage-sizeof(program)"). This does NOT include any resource allocated by the program. This may (or may not) be determinable at compile time.

3) The largest container the current execution of the program could create, given knowledge of the actual run-time platform, but again, not taking into account any currently allocated resource. This is probably best determined at program start-up.

4) The largest container the current execution program could create at the point max_size() is called (or more correctly at the point max_size() returns :-), given it's current environment (i.e. taking into account the actual currently available resources). This, obviously, has to be determined dynamically each time max_size() is called.

Proposed resolution:

Rationale:

max_size() isn't useful for very many things, and the existing wording is sufficiently clear for the few cases that max_size() can be used for. None of the attempts to change the existing wording were an improvement.

It is clear to the LWG that the value returned by max_size() can't change from call to call.


203. basic_istream::sentry::sentry() is uninstantiable with ctype<user-defined type>

Section: 27.6.1.1.3 [istream::sentry] Status: NAD Submitter: Matt McClure and Dietmar Kühl Date: 2000-01-01

View all other issues in [istream::sentry].

View all issues with NAD status.

Discussion:

27.6.1.1.2 Paragraph 4 states:

To decide if the character c is a whitespace character, the constructor performs ''as if'' it executes the following code fragment: 

const ctype<charT>& ctype = use_facet<ctype<charT> >(is.getloc());
if (ctype.is(ctype.space,c)!=0)
// c is a whitespace character.

But Table 51 in 22.1.1.1.1 only requires an implementation to provide specializations for ctype<char> and ctype<wchar_t>. If sentry's constructor is implemented using ctype, it will be uninstantiable for a user-defined character type charT, unless the implementation has provided non-working (since it would be impossible to define a correct ctype<charT> specialization for an arbitrary charT) definitions of ctype's virtual member functions.

It seems the intent the standard is that sentry should behave, in every respect, not just during execution, as if it were implemented using ctype, with the burden of providing a ctype specialization falling on the user. But as it is written, nothing requires the translation of sentry's constructor to behave as if it used the above code, and it would seem therefore, that sentry's constructor should be instantiable for all character types.

Note: If I have misinterpreted the intent of the standard with respect to sentry's constructor's instantiability, then a note should be added to the following effect:

An implementation is forbidden from using the above code if it renders the constructor uninstantiable for an otherwise valid character type.

In any event, some clarification is needed.

Rationale:

It is possible but not easy to instantiate on types other than char or wchar_t; many things have to be done first. That is by intention and is not a defect.


204. distance(first, last) when "last" is before "first"

Section: 24.3.4 [iterator.operations] Status: NAD Submitter: Rintala Matti Date: 2000-01-28

View all issues with NAD status.

Discussion:

Section 24.3.4 describes the function distance(first, last) (where first and last are iterators) which calculates "the number of increments or decrements needed to get from 'first' to 'last'".

The function should work for forward, bidirectional and random access iterators, and there is a requirement 24.3.4.5 which states that "'last' must be reachable from 'first'".

With random access iterators the function is easy to implement as "last - first".

With forward iterators it's clear that 'first' must point to a place before 'last', because otherwise 'last' would not be reachable from 'first'.

But what about bidirectional iterators? There 'last' is reachable from 'first' with the -- operator even if 'last' points to an earlier position than 'first'. However, I cannot see how the distance() function could be implemented if the implementation does not know which of the iterators points to an earlier position (you cannot use ++ or -- on either iterator if you don't know which direction is the "safe way to travel").

The paragraph 24.3.4.1 states that "for ... bidirectional iterators they use ++ to provide linear time implementations". However, the ++ operator is not mentioned in the reachability requirement. Furthermore 24.3.4.4 explicitly mentions that distance() returns the number of increments _or decrements_, suggesting that it could return a negative number also for bidirectional iterators when 'last' points to a position before 'first'.

Is a further requirement is needed to state that for forward and bidirectional iterators "'last' must be reachable from 'first' using the ++ operator". Maybe this requirement might also apply to random access iterators so that distance() would work the same way for every iterator category?

Rationale:

"Reachable" is defined in the standard in 24.1 [iterator.requirements] paragraph 6. The definition is only in terms of operator++(). The LWG sees no defect in the standard.


205. numeric_limits unclear on how to determine floating point types

Section: 18.2.1.2 [numeric.limits.members] Status: NAD Submitter: Steve Cleary Date: 2000-01-28

View all other issues in [numeric.limits.members].

View all issues with NAD status.

Discussion:

In several places in 18.2.1.2 [numeric.limits.members], a member is described as "Meaningful for all floating point types." However, no clear method of determining a floating point type is provided.

In 18.2.1.5 [numeric.special], paragraph 1 states ". . . (for example, epsilon() is only meaningful if is_integer is false). . ." which suggests that a type is a floating point type if is_specialized is true and is_integer is false; however, this is unclear.

When clarifying this, please keep in mind this need of users: what exactly is the definition of floating point? Would a fixed point or rational representation be considered one? I guess my statement here is that there could also be types that are neither integer or (strictly) floating point.

Rationale:

It is up to the implementor of a user define type to decide if it is a floating point type.


207. ctype<char> members return clause incomplete

Section: 22.2.1.3.2 [facet.ctype.char.members] Status: Dup Submitter: Robert Klarer Date: 1999-11-02

View all other issues in [facet.ctype.char.members].

View all issues with Dup status.

Duplicate of: 153

Discussion:

The widen and narrow member functions are described in 22.2.1.3.2, paragraphs 9-11. In each case we have two overloaded signatures followed by a Returns clause. The Returns clause only describes one of the overloads.

Proposed resolution:

Change the returns clause in 22.2.1.3.2 [facet.ctype.char.members] paragraph 10 from:

    Returns: do_widen(low, high, to).

to:

    Returns: do_widen(c) or do_widen(low, high, to), respectively.

Change the returns clause in 22.2.1.3.2 [facet.ctype.char.members] paragraph 11 from:

    Returns: do_narrow(low, high, to).

to:

    Returns: do_narrow(c) or do_narrow(low, high, to), respectively.

Rationale:

Subsumed by issue 153, which addresses the same paragraphs.


213. Math function overloads ambiguous

Section: 26.7 [c.math] Status: NAD Submitter: Nico Josuttis Date: 2000-02-26

View other active issues in [c.math].

View all other issues in [c.math].

View all issues with NAD status.

Discussion:

Due to the additional overloaded versions of numeric functions for float and long double according to Section 26.5, calls such as int x; std::pow (x, 4) are ambiguous now in a standard conforming implementation. Current implementations solve this problem very different (overload for all types, don't overload for float and long double, use preprocessor, follow the standard and get ambiguities).

This behavior should be standardized or at least identified as implementation defined.

Rationale:

These math issues are an understood and accepted consequence of the design. They have been discussed several times in the past. Users must write casts or write floating point expressions as arguments.


215. Can a map's key_type be const?

Section: 23.1.2 [associative.reqmts] Status: NAD Submitter: Judy Ward Date: 2000-02-29

View all other issues in [associative.reqmts].

View all issues with NAD status.

Discussion:

A user noticed that this doesn't compile with the Rogue Wave library because the rb_tree class declares a key_allocator, and allocator<const int> is not legal, I think:

map < const int, ... > // legal?

which made me wonder whether it is legal for a map's key_type to be const. In email from Matt Austern he said:

I'm not sure whether it's legal to declare a map with a const key type. I hadn't thought about that question until a couple weeks ago. My intuitive feeling is that it ought not to be allowed, and that the standard ought to say so. It does turn out to work in SGI's library, though, and someone in the compiler group even used it. Perhaps this deserves to be written up as an issue too.

Rationale:

The "key is assignable" requirement from table 69 in 23.1.2 [associative.reqmts] already implies the key cannot be const.


216. setbase manipulator description flawed

Section: 27.6.3 [std.manip] Status: Dup Submitter: Hyman Rosen Date: 2000-02-29

View all other issues in [std.manip].

View all issues with Dup status.

Duplicate of: 193

Discussion:

27.6.3 [std.manip] paragraph 5 says:

smanip setbase(int base);

Returns: An object s of unspecified type such that if out is an (instance of) basic_ostream then the expression out<<s behaves as if f(s) were called, in is an (instance of) basic_istream then the expression in>>s behaves as if f(s) were called. Where f can be defined as:

ios_base& f(ios_base& str, int base)
{
  // set basefield
  str.setf(n == 8 ? ios_base::oct :
                n == 10 ? ios_base::dec :
                n == 16 ? ios_base::hex :
                  ios_base::fmtflags(0), ios_base::basefield);
  return str;
}

There are two problems here. First, f takes two parameters, so the description needs to say that out<<s and in>>s behave as if f(s,base) had been called. Second, f is has a parameter named base, but is written as if the parameter was named n.

Actually, there's a third problem. The paragraph has grammatical errors. There needs to be an "and" after the first comma, and the "Where f" sentence fragment needs to be merged into its preceding sentence. You may also want to format the function a little better. The formatting above is more-or-less what the Standard contains.

Rationale:

The resolution of this defect is subsumed by the proposed resolution for issue 193.

[Tokyo: The LWG agrees that this is a defect and notes that it occurs additional places in the section, all requiring fixes.]


218. Algorithms do not use binary predicate objects for default comparisons

Section: 25.3 [alg.sorting] Status: NAD Submitter: Pablo Halpern Date: 2000-03-06

View all other issues in [alg.sorting].

View all issues with NAD status.

Discussion:

Many of the algorithms take an argument, pred, of template parameter type BinaryPredicate or an argument comp of template parameter type Compare. These algorithms usually have an overloaded version that does not take the predicate argument. In these cases pred is usually replaced by the use of operator== and comp is replaced by the use of operator<.

This use of hard-coded operators is inconsistent with other parts of the library, particularly the containers library, where equality is established using equal_to<> and ordering is established using less<>. Worse, the use of operator<, would cause the following innocent-looking code to have undefined behavior:

vector<string*> vec;
sort(vec.begin(), vec.end());

The use of operator< is not defined for pointers to unrelated objects. If std::sort used less<> to compare elements, then the above code would be well-defined, since less<> is explicitly specialized to produce a total ordering of pointers.

Rationale:

This use of operator== and operator< was a very deliberate, conscious, and explicitly made design decision; these operators are often more efficient. The predicate forms are available for users who don't want to rely on operator== and operator<.


219. find algorithm missing version that takes a binary predicate argument

Section: 25.1.2 [alg.find] Status: NAD Future Submitter: Pablo Halpern Date: 2000-03-06

View all other issues in [alg.find].

View all issues with NAD Future status.

Discussion:

The find function always searches for a value using operator== to compare the value argument to each element in the input iterator range. This is inconsistent with other find-related functions such as find_end and find_first_of, which allow the caller to specify a binary predicate object to be used for determining equality. The fact that this can be accomplished using a combination of find_if and bind_1st or bind_2nd does not negate the desirability of a consistent, simple, alternative interface to find.

Proposed resolution:

In section 25.1.2 [alg.find], add a second prototype for find (between the existing prototype and the prototype for find_if), as follows:

    template<class InputIterator, class T, class BinaryPredicate>
      InputIterator find(InputIterator first, InputIterator last,
                         const T& value, BinaryPredicate bin_pred);

Change the description of the return from:

Returns: The first iterator i in the range [first, last) for which the following corresponding conditions hold: *i == value, pred(*i) != false. Returns last if no such iterator is found.

 to:

Returns: The first iterator i in the range [first, last) for which the following  corresponding condition holds: *i == value, bin_pred(*i,value) != false, pred(*) != false. Return last if no such iterator is found.

Rationale:

This is request for a pure extension, so it is not a defect in the current standard.  As the submitter pointed out, "this can be accomplished using a combination of find_if and bind_1st or bind_2nd".


236. ctype<char>::is() member modifies facet

Section: 22.2.1.3.2 [facet.ctype.char.members] Status: Dup Submitter: Dietmar Kühl Date: 2000-04-24

View all other issues in [facet.ctype.char.members].

View all issues with Dup status.

Duplicate of: 28

Discussion:

The description of the is() member in paragraph 4 of 22.2.1.3.2 [facet.ctype.char.members] is broken: According to this description, the second form of the is() method modifies the masks in the ctype object. The correct semantics if, of course, to obtain an array of masks. The corresponding method in the general case, ie. the do_is() method as described in 22.2.1.1.2 [locale.ctype.virtuals] paragraph 1 does the right thing.

Proposed resolution:

Change paragraph 4 from

The second form, for all *p in the range [low, high), assigns vec[p-low] to table()[(unsigned char)*p].

to become

The second form, for all *p in the range [low, high), assigns table()[(unsigned char)*p] to vec[p-low].

Rationale:


244. Must find's third argument be CopyConstructible?

Section: 25.1.2 [alg.find] Status: NAD Submitter: Andrew Koenig Date: 2000-05-02

View all other issues in [alg.find].

View all issues with NAD status.

Discussion:

Is the following implementation of find acceptable?

        template<class Iter, class X>
        Iter find(Iter begin, Iter end, const X& x)
        {
            X x1 = x;           // this is the crucial statement
            while (begin != end && *begin != x1)
                ++begin;
            return begin;
        }

If the answer is yes, then it is implementation-dependent as to whether the following fragment is well formed:

        vector<string> v;

        find(v.begin(), v.end(), "foo");

At issue is whether there is a requirement that the third argument of find be CopyConstructible. There may be no problem here, but analysis is necessary.

Rationale:

There is no indication in the standard that find's third argument is required to be Copy Constructible. The LWG believes that no such requirement was intended. As noted above, there are times when a user might reasonably pass an argument that is not Copy Constructible.


245. Which operations on istream_iterator trigger input operations?

Section: 24.5.1 [istream.iterator] Status: NAD Submitter: Andrew Koenig Date: 2000-05-02

View all issues with NAD status.

Discussion:

I do not think the standard specifies what operation(s) on istream iterators trigger input operations. So, for example:

        istream_iterator<int> i(cin);

        int n = *i++;

I do not think it is specified how many integers have been read from cin. The number must be at least 1, of course, but can it be 2? More?

Rationale:

The standard is clear as written: the stream is read every time operator++ is called, and it is also read either when the iterator is constructed or when operator* is called for the first time. In the example above, exactly two integers are read from cin.

There may be a problem with the interaction between istream_iterator and some STL algorithms, such as find. There are no guarantees about how many times find may invoke operator++.


246. a.insert(p,t) is incorrectly specified

Section: 23.1.2 [associative.reqmts] Status: Dup Submitter: Mark Rodgers Date: 2000-05-19

View all other issues in [associative.reqmts].

View all issues with Dup status.

Duplicate of: 233

Discussion:

Closed issue 192 raised several problems with the specification of this function, but was rejected as Not A Defect because it was too big a change with unacceptable impacts on existing implementations. However, issues remain that could be addressed with a smaller change and with little or no consequent impact.

  1. The specification is inconsistent with the original proposal and with several implementations.

    The initial implementation by Hewlett Packard only ever looked immediately before p, and I do not believe there was any intention to standardize anything other than this behavior. Consequently, current implementations by several leading implementors also look immediately before p, and will only insert after p in logarithmic time. I am only aware of one implementation that does actually look after p, and it looks before p as well. It is therefore doubtful that existing code would be relying on the behavior defined in the standard, and it would seem that fixing this defect as proposed below would standardize existing practice.

  2. The specification is inconsistent with insertion for sequence containers.

    This is difficult and confusing to teach to newcomers. All insert operations that specify an iterator as an insertion location should have a consistent meaning for the location represented by that iterator.

  3. As specified, there is no way to hint that the insertion should occur at the beginning of the container, and the way to hint that it should occur at the end is long winded and unnatural.

    For a container containing n elements, there are n+1 possible insertion locations and n+1 valid iterators. For there to be a one-to-one mapping between iterators and insertion locations, the iterator must represent an insertion location immediately before the iterator.

  4. When appending sorted ranges using insert_iterators, insertions are guaranteed to be sub-optimal.

    In such a situation, the optimum location for insertion is always immediately after the element previously inserted. The mechanics of the insert iterator guarantee that it will try and insert after the element after that, which will never be correct. However, if the container first tried to insert before the hint, all insertions would be performed in amortized constant time.

Proposed resolution:

In 23.1.2 [lib.associative.reqmts] paragraph 7, table 69, make the following changes in the row for a.insert(p,t):

assertion/note pre/post condition:
Change the last sentence from

"iterator p is a hint pointing to where the insert should start to search."

to

"iterator p is a hint indicating that immediately before p may be a correct location where the insertion could occur."

complexity:
Change the words "right after" to "immediately before".

Rationale:


249. Return Type of auto_ptr::operator=

Section: D.9.1 [auto.ptr] Status: NAD Submitter: Joseph Gottman Date: 2000-06-30

View all other issues in [auto.ptr].

View all issues with NAD status.

Discussion:

According to section 20.4.5, the function auto_ptr::operator=() returns a reference to an auto_ptr. The reason that operator=() usually returns a reference is to facilitate code like

    int x,y,z;
    x = y = z = 1;

However, given analogous code for auto_ptrs,

    auto_ptr<int> x, y, z;
    z.reset(new int(1));
    x = y = z;

the result would be that z and y would both be set to NULL, instead of all the auto_ptrs being set to the same value. This makes such cascading assignments useless and counterintuitive for auto_ptrs.

Proposed resolution:

Change auto_ptr::operator=() to return void instead of an auto_ptr reference.

Rationale:

The return value has uses other than cascaded assignments: a user can call an auto_ptr member function, pass the auto_ptr to a function, etc. Removing the return value could break working user code.


257. STL functional object and iterator inheritance.

Section: 20.5.3 [base], 24.3.2 [iterator.basic] Status: NAD Submitter: Robert Dick Date: 2000-08-17

View all other issues in [base].

View all issues with NAD status.

Discussion:

According to the November 1997 Draft Standard, the results of deleting an object of a derived class through a pointer to an object of its base class are undefined if the base class has a non-virtual destructor. Therefore, it is potentially dangerous to publicly inherit from such base classes.

Defect:
The STL design encourages users to publicly inherit from a number of classes which do nothing but specify interfaces, and which contain non-virtual destructors.

Attribution:
Wil Evers and William E. Kempf suggested this modification for functional objects.

Proposed resolution:

When a base class in the standard library is useful only as an interface specifier, i.e., when an object of the class will never be directly instantiated, specify that the class contains a protected destructor. This will prevent deletion through a pointer to the base class without performance, or space penalties (on any implementation I'm aware of).

As an example, replace...

    template <class Arg, class Result>
    struct unary_function {
            typedef Arg    argument_type;
            typedef Result result_type;
    };

... with...

    template <class Arg, class Result>
    struct unary_function {
            typedef Arg    argument_type;
            typedef Result result_type;
    protected:
            ~unary_function() {}
    };

Affected definitions:
 20.3.1 [lib.function.objects] -- unary_function, binary_function
 24.3.2 [lib.iterator.basic] -- iterator

Rationale:

The standard is clear as written; this is a request for change, not a defect in the strict sense. The LWG had several different objections to the proposed change. One is that it would prevent users from creating objects of type unary_function and binary_function. Doing so can sometimes be legitimate, if users want to pass temporaries as traits or tag types in generic code.


267. interaction of strstreambuf::overflow() and seekoff()

Section: D.7.1.3 [depr.strstreambuf.virtuals] Status: NAD Submitter: Martin Sebor Date: 2000-10-05

View all other issues in [depr.strstreambuf.virtuals].

View all issues with NAD status.

Discussion:

It appears that the interaction of the strstreambuf members overflow() and seekoff() can lead to undefined behavior in cases where defined behavior could reasonably be expected. The following program demonstrates this behavior:

    #include <strstream>

    int main ()
    {
         std::strstreambuf sb;
         sb.sputc ('c');

         sb.pubseekoff (-1, std::ios::end, std::ios::in);
         return !('c' == sb.sgetc ());
    }

D.7.1.1, p1 initializes strstreambuf with a call to basic_streambuf<>(), which in turn sets all pointers to 0 in 27.5.2.1, p1.

27.5.2.2.5, p1 says that basic_streambuf<>::sputc(c) calls overflow(traits::to_int_type(c)) if a write position isn't available (it isn't due to the above).

D.7.1.3, p3 says that strstreambuf::overflow(off, ..., ios::in) makes at least one write position available (i.e., it allows the function to make any positive number of write positions available).

D.7.1.3, p13 computes newoff = seekhigh - eback(). In D.7.1, p4 we see seekhigh = epptr() ? epptr() : egptr(), or seekhigh = epptr() in this case. newoff is then epptr() - eback().

D.7.1.4, p14 sets gptr() so that gptr() == eback() + newoff + off, or gptr() == epptr() + off holds.

If strstreambuf::overflow() made exactly one write position available then gptr() will be set to just before epptr(), and the program will return 0. Buf if the function made more than one write position available, epptr() and gptr() will both point past pptr() and the behavior of the program is undefined.

Proposed resolution:

Change the last sentence of D.7.1 [depr.strstreambuf] paragraph 4 from

Otherwise, seeklow equals gbeg and seekhigh is either pend, if pend is not a null pointer, or gend.

to become

Otherwise, seeklow equals gbeg and seekhigh is either gend if 0 == pptr(), or pbase() + max where max is the maximum value of pptr() - pbase() ever reached for this stream.

[ pre-Copenhagen: Dietmar provided wording for proposed resolution. ]

[ post-Copenhagen: Fixed a typo: proposed resolution said to fix 4.7.1, not D.7.1. ]

Rationale:

This is related to issue 65: it's not clear what it means to seek beyond the current area. Without resolving issue 65 we can't resolve this. As with issue 65, the library working group does not wish to invest time nailing down corner cases in a deprecated feature.


269. cstdarg and unnamed parameters

Section: 18.7 [support.exception] Status: NAD Submitter: J. Stephen Adamczyk Date: 2000-10-10

View all other issues in [support.exception].

View all issues with NAD status.

Discussion:

One of our customers asks whether this is valid C++:

   #include <cstdarg>

   void bar(const char *, va_list);

   void
   foo(const char *file, const char *, ...)
   {
     va_list ap;
     va_start(ap, file);
     bar(file, ap);
     va_end(ap);
   }

The issue being whether it is valid to use cstdarg when the final parameter before the "..." is unnamed. cstdarg is, as far as I can tell, inherited verbatim from the C standard. and the definition there (7.8.1.1 in the ISO C89 standard) refers to "the identifier of the rightmost parameter". What happens when there is no such identifier?

My personal opinion is that this should be allowed, but some tweak might be required in the C++ standard.

Rationale:

Not a defect, the C and C++ standards are clear. It is impossible to use varargs if the parameter immediately before "..." has no name, because that is the parameter that must be passed to va_start. The example given above is broken, because va_start is being passed the wrong parameter.

There is no support for extending varargs to provide additional functionality beyond what's currently there. For reasons of C/C++ compatibility, it is especially important not to make gratuitous changes in this part of the C++ standard. The C committee has already been requested not to touch this part of the C standard unless necessary.


277. Normative encouragement in allocator requirements unclear

Section: 20.1.2 [allocator.requirements] Status: NAD Submitter: Matt Austern Date: 2000-11-07

View other active issues in [allocator.requirements].

View all other issues in [allocator.requirements].

View all issues with NAD status.

Discussion:

In 20.1.5, paragraph 5, the standard says that "Implementors are encouraged to supply libraries that can accept allocators that encapsulate more general memory models and that support non-equal instances." This is intended as normative encouragement to standard library implementors. However, it is possible to interpret this sentence as applying to nonstandard third-party libraries.

Proposed resolution:

In 20.1.5, paragraph 5, change "Implementors" to "Implementors of the library described in this International Standard".

Rationale:

The LWG believes the normative encouragement is already sufficiently clear, and that there are no important consequences even if it is misunderstood.


279. const and non-const iterators should have equivalent typedefs

Section: 23.1 [container.requirements] Status: NAD Submitter: Steve Cleary Date: 2000-11-27

View other active issues in [container.requirements].

View all other issues in [container.requirements].

View all issues with NAD status.

Discussion:

This came from an email from Steve Cleary to Fergus in reference to issue 179. The library working group briefly discussed this in Toronto and believes it should be a separate issue.

Steve said: "We may want to state that the const/non-const iterators must have the same difference type, size_type, and category."

(Comment from Judy) I'm not sure if the above sentence should be true for all const and non-const iterators in a particular container, or if it means the container's iterator can't be compared with the container's const_iterator unless the above it true. I suspect the former.

Proposed resolution:

In Section: 23.1 [container.requirements], table 65, in the assertion/note pre/post condition for X::const_iterator, add the following:

typeid(X::const_iterator::difference_type) == typeid(X::iterator::difference_type)

typeid(X::const_iterator::size_type) == typeid(X::iterator::size_type)

typeid(X::const_iterator::category) == typeid(X::iterator::category)

Rationale:

Going through the types one by one: Iterators don't have a size_type. We already know that the difference types are identical, because the container requirements already say that the difference types of both X::iterator and X::const_iterator are both X::difference_type. The standard does not require that X::iterator and X::const_iterator have the same iterator category, but the LWG does not see this as a defect: it's possible to imagine cases in which it would be useful for the categories to be different.

It may be desirable to require X::iterator and X::const_iterator to have the same value type, but that is a new issue. (Issue 322.)


287. conflicting ios_base fmtflags

Section: 27.4.2.2 [fmtflags.state] Status: NAD Submitter: Judy Ward Date: 2000-12-30

View all other issues in [fmtflags.state].

View all issues with NAD status.

Discussion:

The Effects clause for ios_base::setf(fmtflags fmtfl) says "Sets fmtfl in flags()". What happens if the user first calls ios_base::scientific and then calls ios_base::fixed or vice-versa? This is an issue for all of the conflicting flags, i.e. ios_base::left and ios_base::right or ios_base::dec, ios_base::hex and ios_base::oct.

I see three possible solutions:

  1. Set ios_base::failbit whenever the user specifies a conflicting flag with one previously explicitly set. If the constructor is supposed to set ios_base::dec (see discussion below), then the user setting hex or oct format after construction will not set failbit.
  2. The last call to setf "wins", i.e. it clears any conflicting previous setting.
  3. All the flags that the user specifies are set, but when actually interpreting them, fixed always override scientific, right always overrides left, dec overrides hex which overrides oct.

Most existing implementations that I tried seem to conform to resolution #3, except that when using the iomanip manipulator hex or oct then that always overrides dec, but calling setf(ios_base::hex) doesn't.

There is a sort of related issue, which is that although the ios_base constructor says that each ios_base member has an indeterminate value after construction, all the existing implementations I tried explicitly set ios_base::dec.

Proposed resolution:

Rationale:

adjustfield, basefield, and floatfield are each multi-bit fields. It is possible to set multiple bits within each of those fields. (For example, dec and oct). These fields are used by locale facets. The LWG reviewed the way in which each of those three fields is used, and believes that in each case the behavior is well defined for any possible combination of bits. See for example Table 58, in 22.2.2.2.2 [facet.num.put.virtuals], noting the requirement in paragraph 6 of that section.

Users are advised to use manipulators, or else use the two-argument version of setf, to avoid unexpected behavior.


289. <cmath> requirements missing C float and long double versions

Section: 26.7 [c.math] Status: NAD Submitter: Judy Ward Date: 2000-12-30

View other active issues in [c.math].

View all other issues in [c.math].

View all issues with NAD status.

Discussion:

In ISO/IEC 9899:1990 Programming Languages C we find the following concerning <math.h>:

7.13.4 Mathematics <math.h>
The names of all existing functions declared in the <math.h> header, suffixed with f or l, are reserved respectively for corresponding functions with float and long double arguments are return values.

For example, float sinf(float) is reserved.

In the C99 standard, <math.h> must contain declarations for these functions.

So, is it acceptable for an implementor to add these prototypes to the C++ versions of the math headers? Are they required?

Proposed resolution:

Add these Functions to Table 80, section 26.5 and to Table 99, section C.2:

    acosf asinf atanf atan2f ceilf cosf coshf 
    expf fabsf floorf fmodf frexpf ldexpf 
    logf log10f modff powf sinf sinhf sqrtf 
    tanf tanhf 
    acosl asinl atanl atan2l ceill cosl coshl 
    expl fabsl floorl fmodl frexpl ldexpl 
    logl log10l modfl powl sinl sinhl sqrtl 
    tanl tanhl

There should probably be a note saying that these functions are optional and, if supplied, should match the description in the 1999 version of the C standard. In the next round of C++ standardization they can then become mandatory.

Rationale:

The C90 standard, as amended, already permits (but does not require) these functions, and the C++ standard incorporates the C90 standard by reference. C99 is not an issue, because it is never referred to by the C++ standard.


293. Order of execution in transform algorithm

Section: 25.2.4 [alg.transform] Status: NAD Submitter: Angelika Langer Date: 2001-01-04

View all other issues in [alg.transform].

View all issues with NAD status.

Discussion:

This issue is related to issue 242. In case that the resolution proposed for issue 242 is accepted, we have have the following situation: The 4 numeric algorithms (accumulate and consorts) as well as transform would allow a certain category of side effects. The numeric algorithms specify that they invoke the functor "for every iterator i in the range [first, last) in order". transform, in contrast, would not give any guarantee regarding order of invocation of the functor, which means that the functor can be invoked in any arbitrary order.

Why would that be a problem? Consider an example: say the transformator that is a simple enumerator ( or more generally speaking, "is order-sensitive" ). Since a standard compliant implementation of transform is free to invoke the enumerator in no definite order, the result could be a garbled enumeration. Strictly speaking this is not a problem, but it is certainly at odds with the prevalent understanding of transform as an algorithms that assigns "a new _corresponding_ value" to the output elements.

All implementations that I know of invoke the transformator in definite order, namely starting from first and proceeding to last - 1. Unless there is an optimization conceivable that takes advantage of the indefinite order I would suggest to specify the order, because it eliminate the uncertainty that users would otherwise have regarding the order of execution of their potentially order-sensitive function objects.

Proposed resolution:

In section 25.2.3 - Transform [lib.alg.transform] change:

-1- Effects: Assigns through every iterator i in the range [result, result + (last1 - first1)) a new corresponding value equal to op(*(first1 + (i - result)) or binary_op(*(first1 + (i - result), *(first2 + (i - result))).

to:

-1- Effects: Computes values by invoking the operation op or binary_op for every iterator in the range [first1, last1) in order. Assigns through every iterator i in the range [result, result + (last1 - first1)) a new corresponding value equal to op(*(first1 + (i - result)) or binary_op(*(first1 + (i - result), *(first2 + (i - result))).

Rationale:

For Input Iterators an order is already guaranteed, because only one order is possible. If a user who passes a Forward Iterator to one of these algorithms really needs a specific order of execution, it's possible to achieve that effect by wrapping it in an Input Iterator adaptor.


296. Missing descriptions and requirements of pair operators

Section: 20.2.3 [pairs] Status: NAD Submitter: Martin Sebor Date: 2001-01-14

View all other issues in [pairs].

View all issues with NAD status.

Discussion:

The synopsis of the header <utility> in 20.2 [utility] lists the complete set of equality and relational operators for pair but the section describing the template and the operators only describes operator==() and operator<(), and it fails to mention any requirements on the template arguments. The remaining operators are not mentioned at all.

Rationale:

20.2.1 [operators] paragraph 10 already specifies the semantics. That paragraph says that, if declarations of operator!=, operator>, operator<=, and operator>= appear without definitions, they are defined as specified in 20.2.1 [operators]. There should be no user confusion, since that paragraph happens to immediately precede the specification of pair.


302. Need error indication from codecvt<>::do_length

Section: 22.2.1.5 [locale.codecvt.byname] Status: NAD Submitter: Gregory Bumgardner Date: 2001-01-25

View all other issues in [locale.codecvt.byname].

View all issues with NAD status.

Discussion:

The effects of codecvt<>::do_length() are described in 22.2.1.5.2, paragraph 10. As implied by that paragraph, and clarified in issue 75, codecvt<>::do_length() must process the source data and update the stateT argument just as if the data had been processed by codecvt<>::in(). However, the standard does not specify how do_length() would report a translation failure, should the source sequence contain untranslatable or illegal character sequences.

The other conversion methods return an "error" result value to indicate that an untranslatable character has been encountered, but do_length() already has a return value (the number of source characters that have been processed by the method).

Proposed resolution:

This issue cannot be resolved without modifying the interface. An exception cannot be used, as there would be no way to determine how many characters have been processed and the state object would be left in an indeterminate state.

A source compatible solution involves adding a fifth argument to length() and do_length() that could be used to return position of the offending character sequence. This argument would have a default value that would allow it to be ignored:

  int length(stateT& state, 
             const externT* from, 
             const externT* from_end, 
             size_t max,
             const externT** from_next = 0);

  virtual
  int do_length(stateT& state, 
                const externT* from, 
                const externT* from_end, 
                size_t max,
                const externT** from_next);

Then an exception could be used to report any translation errors and the from_next argument, if used, could then be used to retrieve the location of the offending character sequence.

Rationale:

The standard is already clear: the return value is the number of "valid complete characters". If it encounters an invalid sequence of external characters, it stops.


304. Must *a return an lvalue when a is an input iterator?

Section: 24.1 [iterator.requirements] Status: NAD Submitter: Dave Abrahams Date: 2001-02-05

View other active issues in [iterator.requirements].

View all other issues in [iterator.requirements].

View all issues with NAD status.

Discussion:

We all "know" that input iterators are allowed to produce values when dereferenced of which there is no other in-memory copy.

But: Table 72, with a careful reading, seems to imply that this can only be the case if the value_type has no members (e.g. is a built-in type).

The problem occurs in the following entry:

  a->m     pre: (*a).m is well-defined
           Equivalent to (*a).m

*a.m can be well-defined if *a is not a reference type, but since operator->() must return a pointer for a->m to be well-formed, it needs something to return a pointer to. This seems to indicate that *a must be buffered somewhere to make a legal input iterator.

I don't think this was intentional.

Rationale:

The current standard is clear and consistent. Input iterators that return rvalues are in fact implementable. They may in some cases require extra work, but it is still possible to define an operator-> in such cases: it doesn't have to return a T*, but may return a proxy type. No change to the standard is justified.


313. set_terminate and set_unexpected question

Section: 18.7.3.3 [terminate] Status: NAD Submitter: Judy Ward Date: 2001-04-03

View all other issues in [terminate].

View all issues with NAD status.

Discussion:

According to section 18.7.3.3 of the standard, std::terminate() is supposed to call the terminate_handler in effect immediately after evaluating the throw expression.

Question: what if the terminate_handler in effect is itself std::terminate?

For example:

  #include <exception>

  int main () {
      std::set_terminate(std::terminate);
      throw 5;
      return 0;
  }

Is the implementation allowed to go into an infinite loop?

I think the same issue applies to std::set_unexpected.

Proposed resolution:

Rationale:

Infinite recursion is to be expected: users who set the terminate handler to terminate are explicitly asking for terminate to call itself.


314. Is the stack unwound when terminate() is called?

Section: 18.7.3.3 [terminate] Status: NAD Submitter: Detlef Vollmann Date: 2001-04-11

View all other issues in [terminate].

View all issues with NAD status.

Discussion:

The standard appears to contradict itself about whether the stack is unwound when the implementation calls terminate().

From 18.7.3.3p2:

Calls the terminate_handler function in effect immediately after evaluating the throw-expression (lib.terminate.handler), if called by the implementation [...]

So the stack is guaranteed not to be unwound.

But from 15.3p9:

[...]whether or not the stack is unwound before this call to terminate() is implementation-defined (except.terminate).

And 15.5.1 actually defines that in most cases the stack is unwound.

Proposed resolution:

Rationale:

There is definitely no contradiction between the core and library clauses; nothing in the core clauses says that stack unwinding happens after terminate is called. 18.7.3.3p2 does not say anything about when terminate() is called; it merely specifies which terminate_handler is used.


323. abs() overloads in different headers

Section: 26.7 [c.math] Status: NAD Future Submitter: Dave Abrahams Date: 2001-06-04

View other active issues in [c.math].

View all other issues in [c.math].

View all issues with NAD Future status.

Discussion:

Currently the standard mandates the following overloads of abs():

    abs(long), abs(int) in <cstdlib>

    abs(float), abs(double), abs(long double) in <cmath>

    template<class T> T abs(const complex<T>&) in <complex>

    template<class T> valarray<T> abs(const valarray<T>&); in <valarray>

The problem is that having only some overloads visible of a function that works on "implicitly inter-convertible" types is dangerous in practice. The headers that get included at any point in a translation unit can change unpredictably during program development/maintenance. The wrong overload might be unintentionally selected.

Currently, there is nothing that mandates the simultaneous visibility of these overloads. Indeed, some vendors have begun fastidiously reducing dependencies among their (public) headers as a QOI issue: it helps people to write portable code by refusing to compile unless all the correct headers are #included.

The same issue may exist for other functions in the library.

Redmond: PJP reports that C99 adds two new kinds of abs: complex, and int_max_abs.

Related issue: 343.

Rationale:

The programs that could potentially be broken by this situation are already fragile, and somewhat contrived: For example, a user-defined class that has conversion overloads both to long and to float. If x is a value of such a class, then abs(x) would give the long version if the user included <cstdlib>, the float version if the user included <cmath>, and would be diagnosed as ambiguous at compile time if the user included both headers. The LWG couldn't find an example of a program whose meaning would be changed (as opposed to changing it from well-formed to ill-formed) simply by adding another standard header.

Since the harm seems minimal, and there don't seem to be any simple and noninvasive solutions, this is being closed as NAD. It is marked as "Future" for two reasons. First, it might be useful to define an <all> header that would include all Standard Library headers. Second, we should at least make sure that future library extensions don't make this problem worse.


326. Missing typedef in moneypunct_byname

Section: 22.2.6.4 [locale.moneypunct.byname] Status: NAD Submitter: Martin Sebor Date: 2001-07-05

View all issues with NAD status.

Discussion:

The definition of the moneypunct facet contains the typedefs char_type and string_type. Only one of these names, string_type, is defined in the derived facet, moneypunct_byname.

Proposed resolution:

For consistency with the numpunct facet, add a typedef for char_type to the definition of the moneypunct_byname facet in 22.2.6.4 [locale.moneypunct.byname].

Rationale:

The absence of the typedef is irrelevant. Users can still access the typedef, because it is inherited from the base class.


330. Misleading "exposition only" value in class locale definition

Section: 22.1.1 [locale] Status: NAD Submitter: Martin Sebor Date: 2001-07-15

View all other issues in [locale].

View all issues with NAD status.

Discussion:

The "exposition only" value of the std::locale::none constant shown in the definition of class locale is misleading in that it on many systems conflicts with the value assigned to one if the LC_XXX constants (specifically, LC_COLLATE on AIX, LC_ALL on HP-UX, LC_CTYPE on Linux and SunOS). This causes incorrect behavior when such a constant is passed to one of the locale member functions that accept a locale::category argument and interpret it as either the C LC_XXX constant or a bitmap of locale::category values. At least three major implementations adopt the suggested value without a change and consequently suffer from this problem.

For instance, the following code will (presumably) incorrectly copy facets belonging to the collate category from the German locale on AIX:

  std::locale l (std::locale ("C"), "de_DE", std::locale::none);

Rationale:

The LWG agrees that it may be difficult to implement locale member functions in such a way that they can take either category arguments or the LC_ constants defined in <cctype>. In light of this requirement (22.1.1.1.1 [locale.category], paragraph 2), and in light of the requirement in the preceding paragraph that it is possible to combine category bitmask elements with bitwise operations, defining the category elements is delicate, particularly if an implementor is constrained to work with a preexisting C library. (Just using the existing LC_ constants would not work in general.) There's no set of "exposition only" values that could give library implementors proper guidance in such a delicate matter. The non-normative example we're giving is no worse than any other choice would be.

See issue 347.


332. Consider adding increment and decrement operators to std::fpos< T >

Section: 27.4.3 [fpos] Status: NAD Submitter: PremAnand M. Rao Date: 2001-08-27

View all other issues in [fpos].

View all issues with NAD status.

Discussion:

Increment and decrement operators are missing from Table 88 -- Position type requirements in 27.4.3 [fpos].

Proposed resolution:

Table 88 (section 27.4.3) -- Position type requirements be updated to include increment and decrement operators.

expression        return type     operational    note

++p               fpos&           p += O(1)
p++               fpos            { P tmp = p;
                                    ++p;
                                    return tmp; }
--p               fpos&           p -= O(1)
p--               fpos            { P tmp = p;
                                    --p;
                                    return tmp; }

Rationale:

The LWG believes this is a request for extension, not a defect report. Additionally, nobody saw a clear need for this extension; fpos is used only in very limited ways.


344. grouping + showbase

Section: 22.2.2 [category.numeric] Status: NAD Submitter: Howard Hinnant Date: 2001-10-13

View all issues with NAD status.

Discussion:

When both grouping and showbase are active and the basefield is octal, does the leading 0 participate in the grouping or not? For example, should one format as: 0,123,456 or 0123,456?

An analogy can be drawn with hexadecimal. It appears that 0x123,456 is preferred over 0x,123,456. However, this analogy is not universally accepted to apply to the octal base. The standard is not clear on how to format (or parse) in this manner.

Proposed resolution:

Insert into 22.2.3.1.2 [facet.numpunct.virtuals] paragraph 3, just before the last sentence:

The leading hexadecimal base specifier "0x" does not participate in grouping. The leading '0' octal base specifier may participate in grouping. It is unspecified if the leading '0' participates in formatting octal numbers. In parsing octal numbers, the implementation is encouraged to accept both the leading '0' participating in the grouping, and not participating (e.g. 0123,456 or 0,123,456).

Rationale:

The current behavior may be unspecified, but it's not clear that it matters. This is an obscure corner case, since grouping is usually intended for the benefit of humans and oct/hex prefixes are usually intended for the benefit of machines. There is not a strong enough consensus in the LWG for action.


348. Minor issue with std::pair operator<

Section: 20.2.3 [pairs] Status: NAD Future Submitter: Andy Sawyer Date: 2001-10-23

View all other issues in [pairs].

View all issues with NAD Future status.

Discussion:

The current wording of 20.2.2 [lib.pairs] p6 precludes the use of operator< on any pair type which contains a pointer.

Proposed resolution:

In 20.2.3 [pairs] paragraph 6, replace:

    Returns: x.first < y.first || (!(y.first < x.first) && x.second <
        y.second).

With:

    Returns: std::less<T1>()( x.first, y.first ) ||
             (!std::less<T1>()( y.first, x.first) && 
             std::less<T2>()( x.second, y.second ) )

Rationale:

This is an instance of a much more general problem. If we want operator< to translate to std::less for pairs of pointers, where do we draw the line? The same issue applies to individual pointers, smart pointer wrappers, std::vector<T*>, and so on.

Andy Koenig suggests that the real issue here is that we aren't distinguishing adequately between two different orderings, a "useful ordering" and a "canonical ordering" that's used just because we sometimes need some ordering without caring much which ordering it is. Another example of the later is typeinfo's before.


350. allocator<>::address

Section: 20.6.1.1 [allocator.members], 20.1.2 [allocator.requirements], 17.4.1.1 [contents] Status: Dup Submitter: Nathan Myers Date: 2001-10-25

View all other issues in [allocator.members].

View all issues with Dup status.

Duplicate of: 634

Discussion:

See c++std-lib-9006 and c++std-lib-9007. This issue is taken verbatim from -9007.

The core language feature allowing definition of operator&() applied to any non-builtin type makes that operator often unsafe to use in implementing libraries, including the Standard Library. The result is that many library facilities fail for legal user code, such as the fragment

  class A { private: A* operator&(); };
  std::vector<A> aa;

  class B { };
  B* operator&(B&) { return 0; }
  std::vector<B> ba;

In particular, the requirements table for Allocator (Table 32) specifies no semantics at all for member address(), and allocator<>::address is defined in terms of unadorned operator &.

Proposed resolution:

In 20.6.1.1, Change the definition of allocator<>::address from:

Returns: &x

to:

Returns: The value that the built in operator&(x) would return if not overloaded.

In 20.1.6, Table 32, add to the Notes column of the a.address(r) and a.address(s) lines, respectively:

  allocator<T>::address(r)
  allocator<T>::address(s)

In addition, in clause 17.4.1.1, add a statement:

The Standard Library does not apply operator& to any type for which operator& may be overloaded.

Rationale:

The LWG believes both examples are ill-formed. The contained type is required to be CopyConstructible (20.1.1 [utility.arg.requirements]), and that includes the requirement that &t return the usual types and values. Since allocators are intended to be used in conjunction with containers, and since the CopyConstructible requirements appear to have been written to deal with the concerns of this issue, the LWG feels it is NAD unless someone can come up with a well-formed example exhibiting a problem.

It may well be that the CopyConstructible requirements are too restrictive and that either the container requirements or the CopyConstructive requirements should be relaxed, but that's a far larger issue. Marking this issue as "future" as a pointer to that larger issue.


351. unary_negate and binary_negate: struct or class?

Section: 20.5 [function.objects] Status: NAD Editorial Submitter: Dale Riley Date: 2001-11-12

View all other issues in [function.objects].

View all issues with NAD Editorial status.

Discussion:

In 20.5 [function.objects] the header <functional> synopsis declares the unary_negate and binary_negate function objects as struct. However in 20.5.10 [negators] the unary_negate and binary_negate function objects are defined as class. Given the context, they are not "basic function objects" like negate, so this is either a typo or an editorial oversight.

[Taken from comp.std.c++]

Proposed resolution:

Change the synopsis to reflect the useage in 20.5.10 [negators]

[Curaçao: Since the language permits "struct", the LWG views this as NAD. They suggest, however, that the Project Editor might wish to make the change as editorial.]


353. std::pair missing template assignment

Section: 20.2.3 [pairs] Status: NAD Future Submitter: Martin Sebor Date: 2001-12-02

View all other issues in [pairs].

View all issues with NAD Future status.

Discussion:

The class template std::pair defines a template ctor (20.2.2, p4) but no template assignment operator. This may lead to inefficient code since assigning an object of pair<C, D> to pair<A, B> where the types C and D are distinct from but convertible to A and B, respectively, results in a call to the template copy ctor to construct an unnamed temporary of type pair<A, B> followed by an ordinary (perhaps implicitly defined) assignment operator, instead of just a straight assignment.

Proposed resolution:

Add the following declaration to the definition of std::pair:

    template<class U, class V>
    pair& operator=(const pair<U, V> &p);

And also add a paragraph describing the effects of the function template to the end of 20.2.2:

    template<class U, class V>
    pair& operator=(const pair<U, V> &p);

Effects: first = p.first; second = p.second; Returns: *this

[Curaçao: There is no indication this is was anything other than a design decision, and thus NAD.  May be appropriate for a future standard.]


356. Meaning of ctype_base::mask enumerators

Section: 22.2.1 [category.ctype] Status: NAD Submitter: Matt Austern Date: 2002-01-23

View all other issues in [category.ctype].

View all issues with NAD status.

Discussion:

What should the following program print?

  #include <locale>
  #include <iostream>

  class my_ctype : public std::ctype<char>
  {
    typedef std::ctype<char> base;
  public:
    my_ctype(std::size_t refs = 0) : base(my_table, false, refs)
    {
      std::copy(base::classic_table(), base::classic_table() + base::table_size,
                my_table);
      my_table[(unsigned char) '_'] = (base::mask) (base::print | base::space);
    }
  private:
    mask my_table[base::table_size];
  };

  int main()
  {
    my_ctype ct;
    std::cout << "isspace: " << ct.is(std::ctype_base::space, '_') << "    "
              << "isalpha: " << ct.is(std::ctype_base::alpha, '_') << std::endl;
  }

The goal is to create a facet where '_' is treated as whitespace.

On gcc 3.0, this program prints "isspace: 1 isalpha: 0". On Microsoft C++ it prints "isspace: 1 isalpha: 1".

I believe that both implementations are legal, and the standard does not give enough guidance for users to be able to use std::ctype's protected interface portably.

The above program assumes that ctype_base::mask enumerators like space and print are disjoint, and that the way to say that a character is both a space and a printing character is to or those two enumerators together. This is suggested by the "exposition only" values in 22.2.1 [category.ctype], but it is nowhere specified in normative text. An alternative interpretation is that the more specific categories subsume the less specific. The above program gives the results it does on the Microsoft compiler because, on that compiler, print has all the bits set for each specific printing character class.

From the point of view of std::ctype's public interface, there's no important difference between these two techniques. From the point of view of the protected interface, there is. If I'm defining a facet that inherits from std::ctype<char>, I'm the one who defines the value that table()['a'] returns. I need to know what combination of mask values I should use. This isn't so very esoteric: it's exactly why std::ctype has a protected interface. If we care about users being able to write their own ctype facets, we have to give them a portable way to do it.

Related reflector messages: lib-9224, lib-9226, lib-9229, lib-9270, lib-9272, lib-9273, lib-9274, lib-9277, lib-9279.

Issue 339 is related, but not identical. The proposed resolution if issue 339 says that ctype_base::mask must be a bitmask type. It does not say that the ctype_base::mask elements are bitmask elements, so it doesn't directly affect this issue.

More comments from Benjamin Kosnik, who believes that that C99 compatibility essentially requires what we're calling option 1 below.

I think the C99 standard is clear, that isspace -> !isalpha.
--------

#include <locale>
#include <iostream>

class my_ctype : public std::ctype<char>
{
private:
  typedef std::ctype<char> base;
  mask my_table[base::table_size];

public:
  my_ctype(std::size_t refs = 0) : base(my_table, false, refs)
  {
    std::copy(base::classic_table(), base::classic_table() + base::table_size,
              my_table);
    mask both = base::print | base::space;
    my_table[static_cast<mask>('_')] = both;
  }
};

int main()
{
  using namespace std;
  my_ctype ct;
  cout << "isspace: " << ct.is(ctype_base::space, '_') << endl;
  cout << "isprint: " << ct.is(ctype_base::print, '_') << endl;

  // ISO C99, isalpha iff upper | lower set, and !space.
  // 7.5, p 193
  // -> looks like g++ behavior is correct.
  // 356 -> bitmask elements are required for ctype_base
  // 339 -> bitmask type required for mask
  cout << "isalpha: " << ct.is(ctype_base::alpha, '_') << endl;
}

Proposed resolution:

Informally, we have three choices:

  1. Require that the enumerators are disjoint (except for alnum and graph)
  2. Require that the enumerators are not disjoint, and specify which of them subsume which others. (e.g. mandate that lower includes alpha and print)
  3. Explicitly leave this unspecified, which the result that the above program is not portable.

Either of the first two options is just as good from the standpoint of portability. Either one will require some implementations to change.

Rationale:

The LWG agrees that this is a real ambiguity, and that both interpretations are conforming under the existing standard. However, there's no evidence that it's causing problems for real users. Users who want to define ctype facets portably can test the ctype_base masks to see which interpretation is being used.


357. <cmath> float functions cannot return HUGE_VAL

Section: 26.7 [c.math] Status: NAD Editorial Submitter: Ray Lischner Date: 2002-02-26

View other active issues in [c.math].

View all other issues in [c.math].

View all issues with NAD Editorial status.

Discussion:

The float versions of the math functions have no meaningful value to return for a range error. The long double versions have a value they can return, but it isn't necessarily the most reasonable value.

Section 26.5 [lib.c.math], paragraph 5, says that C++ "adds float and long double overloaded versions of these functions, with the same semantics," referring to the math functions from the C90 standard.

The C90 standard, in section 7.5.1, paragraph 3, says that functions return "the value of the macro HUGE_VAL" when they encounter a range error. Section 7.5, paragraph 2, defines HUGE_VAL as a macro that "expands to a positive double expression, not necessarily representable as a float."

Therefore, the float versions of the math functions have no way to signal a range error. [Curaçao: The LWG notes that this isn't strictly correct, since errno is set.] The semantics require that they return HUGE_VAL, but they cannot because HUGE_VAL might not be representable as a float.

The problem with long double functions is less severe because HUGE_VAL is representable as a long double. On the other hand, it might not be a "huge" long double value, and might fall well within the range of normal return values for a long double function. Therefore, it does not make sense for a long double function to return a double (HUGE_VAL) for a range error.

Proposed resolution:

Curaçao: C99 was faced with a similar problem, which they fixed by adding HUGE_VALF and HUGE_VALL in addition to HUGE_VAL.

C++ must also fix, but it should be done in the context of the general C99 based changes to C++, not via DR. Thus the LWG in Curaçao felt the resolution should be NAD, FUTURE, but the issue is being held open for one more meeting to ensure LWG members not present during the discussion concur.

Rationale:

Will be fixed as part of more general work in the TR.


361. num_get<>::do_get (..., void*&) checks grouping

Section: 22.2.2.2.2 [facet.num.put.virtuals] Status: NAD Submitter: Martin Sebor Date: 2002-03-12

View all other issues in [facet.num.put.virtuals].

View all issues with NAD status.

Discussion:

22.2.2.2.2, p12 specifies that thousands_sep is to be inserted only for integral types (issue 282 suggests that this should be done for all arithmetic types).

22.2.2.1.2, p12 requires that grouping be checked for all extractors including that for void*.

I don't think that's right. void* values should not be checked for grouping, should they? (Although if they should, then num_put needs to write them out, otherwise their extraction will fail.)

Proposed resolution:

Change the first sentence of 22.2.2.2.2, p12 from

Digit grouping is checked. That is, the positions of discarded separators is examined for consistency with use_facet<numpunct<charT> >(loc).grouping(). If they are not consistent then ios_base::failbit is assigned to err.

to

Except for conversions to void*, digit grouping is checked...

Rationale:

This would be a change: as it stands, the standard clearly specifies that grouping applies to void*. A survey of existing practice shows that most existing implementations do that, as they should.


366. Excessive const-qualification

Section: 27 [input.output] Status: NAD Submitter: Walter Brown, Marc Paterno Date: 2002-05-10

View all other issues in [input.output].

View all issues with NAD status.

Discussion:

The following member functions are declared const, yet return non-const pointers. We believe they are should be changed, because they allow code that may surprise the user. See document N1360 for details and rationale.

[Santa Cruz: the real issue is that we've got const member functions that return pointers to non-const, and N1360 proposes replacing them by overloaded pairs. There isn't a consensus about whether this is a real issue, since we've never said what our constness policy is for iostreams. N1360 relies on a distinction between physical constness and logical constness; that distinction, or those terms, does not appear in the standard.]

Proposed resolution:

In 27.4.4 and 27.4.4.2

Replace

  basic_ostream<charT,traits>* tie() const;

with

  basic_ostream<charT,traits>* tie();
  const basic_ostream<charT,traits>* tie() const;

and replace

  basic_streambuf<charT,traits>* rdbuf() const;

with

  basic_streambuf<charT,traits>* rdbuf();
  const basic_streambuf<charT,traits>* rdbuf() const;

In 27.5.2 and 27.5.2.3.1

Replace

  char_type* eback() const;

with

  char_type* eback();
  const char_type* eback() const;

Replace

  char_type gptr() const;

with

  char_type* gptr();
  const char_type* gptr() const;

Replace

  char_type* egptr() const;

with

  char_type* egptr();
  const char_type* egptr() const;

In 27.5.2 and 27.5.2.3.2

Replace

  char_type* pbase() const;

with

  char_type* pbase();
  const char_type* pbase() const;

Replace

  char_type* pptr() const;

with

  char_type* pptr();
  const char_type* pptr() const;

Replace

  char_type* epptr() const;

with

  char_type* epptr();
  const char_type* epptr() const;

In 27.7.2, 27.7.2.2, 27.7.3 27.7.3.2, 27.7.4, and 27.7.6

Replace

  basic_stringbuf<charT,traits,Allocator>* rdbuf() const;

with

  basic_stringbuf<charT,traits,Allocator>* rdbuf();
  const basic_stringbuf<charT,traits,Allocator>* rdbuf() const;

In 27.8.1.5, 27.8.1.7, 27.8.1.8, 27.8.1.10, 27.8.1.11, and 27.8.1.13

Replace

  basic_filebuf<charT,traits>* rdbuf() const;

with

  basic_filebuf<charT,traits>* rdbuf();
  const basic_filebuf<charT,traits>* rdbuf() const;

Rationale:

The existing specification is a bit sloppy, but there's no particular reason to change this other than tidiness, and there are a number of ways in which streams might have been designed differently if we were starting today. There's no evidence that the existing constness policy is harming users. We might consider a different constness policy as part of a full stream redesign.


367. remove_copy/remove_copy_if and Input Iterators

Section: 25.2.8 [alg.remove] Status: NAD Submitter: Anthony Williams Date: 2002-05-13

View all other issues in [alg.remove].

View all issues with NAD status.

Discussion:

remove_copy and remove_copy_if (25.2.8 [alg.remove]) permit their input range to be marked with Input Iterators. However, since two operations are required against the elements to copy (comparison and assigment), when the input range uses Input Iterators, a temporary copy must be taken to avoid dereferencing the iterator twice. This therefore requires the value type of the InputIterator to be CopyConstructible. If the iterators are at least Forward Iterators, then the iterator can be dereferenced twice, or a reference to the result maintained, so the temporary is not required.

Proposed resolution:

Add "If InputIterator does not meet the requirements of forward iterator, then the value type of InputIterator must be copy constructible. Otherwise copy constructible is not required." to 25.2.8 [alg.remove] paragraph 6.

Rationale:

The assumption is that an input iterator can't be dereferenced twice. There's no basis for that assumption in the Standard.


368. basic_string::replace has two "Throws" paragraphs

Section: 21.3.6.6 [string::replace] Status: NAD Editorial Submitter: Beman Dawes Date: 2002-06-03

View all issues with NAD Editorial status.

Discussion:

21.3.6.6 [string::replace] basic_string::replace, second signature, given in paragraph 1, has two "Throws" paragraphs (3 and 5).

In addition, the second "Throws" paragraph (5) includes specification (beginning with "Otherwise, the function replaces ...") that should be part of the "Effects" paragraph.

Proposed resolution:

Rationale:

This is editorial. Both "throws" statements are true. The bug is just that the second one should be a sentence, part of the "Effects" clause, not a separate "Throws". The project editor has been notified.


372. Inconsistent description of stdlib exceptions

Section: 17.4.4.8 [res.on.exception.handling], 18.6.1 [type.info] Status: NAD Submitter: Randy Maddox Date: 2002-07-22

View all other issues in [res.on.exception.handling].

View all issues with NAD status.

Discussion:

Paragraph 3 under clause 17.4.4.8 [res.on.exception.handling], Restrictions on Exception Handling, states that "Any other functions defined in the C++ Standard Library that do not have an exception-specification may throw implementation-defined exceptions unless otherwise specified." This statement is followed by a reference to footnote 178 at the bottom of that page which states, apparently in reference to the C++ Standard Library, that "Library implementations are encouraged (but not required) to report errors by throwing exceptions from (or derived from) the standard exceptions."

These statements appear to be in direct contradiction to clause 18.6.1 [type.info], which states "The class exception defines the base class for the types of objects thrown as exceptions by the C++ Standard library components ...".

Is this inconsistent?

Proposed resolution:

Rationale:

Clause 17 is setting the overall library requirements, and it's clear and consistent. This sentence from Clause 18 is descriptive, not setting a requirement on any other class.


374. moneypunct::frac_digits returns int not unsigned

Section: 22.2.6.3.1 [locale.moneypunct.members], 22.2.6.3.2 [locale.moneypunct.virtuals] Status: NAD Submitter: Ray Lischner Date: 2002-08-08

View all issues with NAD status.

Discussion:

In section 22.2.6.3.1 [locale.moneypunct.members], frac_digits() returns type "int". This implies that frac_digits() might return a negative value, but a negative value is nonsensical. It should return "unsigned".

Similarly, in section 22.2.6.3.2 [locale.moneypunct.virtuals], do_frac_digits() should return "unsigned".

Proposed resolution:

Rationale:

Regardless of whether the return value is int or unsigned, it's always conceivable that frac_digits might return a nonsensical value. (Is 4294967295 really any better than -1?) The clients of moneypunct, the get and put facets, can and do perform range checks.


377. basic_string::insert and length_error

Section: 21.3.6.4 [string::insert] Status: NAD Submitter: Ray Lischner Date: 2002-08-16

View all other issues in [string::insert].

View all issues with NAD status.

Discussion:

Section 21.3.6.4 [string::insert], paragraph 4, contains the following, "Then throws length_error if size() >= npos - rlen."

Related to DR 83, this sentence should probably be removed.

Proposed resolution:

Rationale:

This requirement is redundant but correct. No change is needed.


378. locale immutability and locale::operator=()

Section: 22.1.1 [locale] Status: Dup Submitter: Martin Sebor Date: 2002-09-06

View all other issues in [locale].

View all issues with Dup status.

Duplicate of: 31

Discussion:

I think there is a problem with 22.1.1, p6 which says that

    -6- An instance of locale is immutable; once a facet reference
        is obtained from it, that reference remains usable as long
        as the locale value itself exists.

and 22.1.1.2, p4:

    const locale& operator=(const locale& other) throw();

    -4- Effects: Creates a copy of other, replacing the current value.

How can a reference to a facet obtained from a locale object remain valid after an assignment that clearly must replace all the facets in the locale object? Imagine a program such as this

    std::locale loc ("de_DE");
    const std::ctype<char> &r0 = std::use_facet<std::ctype<char> >(loc);
    loc = std::locale ("en_US");
    const std::ctype<char> &r1 = std::use_facet<std::ctype<char> >(loc);

Is r0 really supposed to be preserved and destroyed only when loc goes out of scope?

Proposed resolution:

[Summer '04 mid-meeting mailing: Martin and Dietmar believe this is a duplicate of issue 31 and recommend that it be closed. ]


385. Does call by value imply the CopyConstructible requirement?

Section: 17 [library] Status: NAD Submitter: Matt Austern Date: 2002-10-23

View all other issues in [library].

View all issues with NAD status.

Discussion:

Many function templates have parameters that are passed by value; a typical example is find_if's pred parameter in 25.1.2 [alg.find]. Are the corresponding template parameters (Predicate in this case) implicitly required to be CopyConstructible, or does that need to be spelled out explicitly?

This isn't quite as silly a question as it might seem to be at first sight. If you call find_if in such a way that template argument deduction applies, then of course you'll get call by value and you need to provide a copy constructor. If you explicitly provide the template arguments, however, you can force call by reference by writing something like find_if<my_iterator, my_predicate&>. The question is whether implementation are required to accept this, or whether this is ill-formed because my_predicate& is not CopyConstructible.

The scope of this problem, if it is a problem, is unknown. Function object arguments to generic algorithms in clauses 25 [algorithms] and 26 [numerics] are obvious examples. A review of the whole library is necessary.

[ This is really two issues. First, predicates are typically passed by value but we don't say they must be Copy Constructible. They should be. Second: is specialization allowed to transform value arguments into references? References aren't copy constructible, so this should not be allowed. ]

[ 2007-01-12, Howard: First, despite the note above, references are copy constructible. They just aren't assignable. Second, this is very closely related to 92 and should be consistent with that. That issue already says that implementations are allowed to copy function objects. If one passes in a reference, it is copyable, but susceptible to slicing if one passes in a reference to a base. Third, with rvalue reference in the language one only needs to satisfy MoveConstructible to pass an rvalue "by value". Though the function might still copy the function object internally (requiring CopyConstructible). Finally (and fwiw), if we wanted to, it is easy to code all of the std::algorithms such that they do not copy function objects internally. One merely passes them by reference internally if desired (this has been fully implemented and shipped for several years). If this were mandated, it would reverse 92, allowing function objects to reliably maintain state. E.g. the example in 92 would reliably remove only the third element. ]

Proposed resolution:

Recommend NAD.

Rationale:

Generic algorithms will be marked with concepts and these will imply a requirement of MoveConstructible (not CopyConstructible). The signature of the function will then precisely describe and enforce the precise requirements.


388. Use of complex as a key in associative containers

Section: 26.3 [complex.numbers] Status: NAD Future Submitter: Gabriel Dos Reis Date: 2002-11-08

View all other issues in [complex.numbers].

View all issues with NAD Future status.

Discussion:

Practice with std::complex<> and the associative containers occasionally reveals artificial and distracting issues with constructs resembling: std::set<std::complex<double> > s;

The main reason for the above to fail is the absence of an approriate definition for std::less<std::complex<T> >. That in turn comes from the definition of the primary template std::less<> in terms of operator<.

The usual argument goes as follows: Since there is no ordering over the complex field compatible with field operations it makes little sense to define a function operator< operating on the datatype std::complex<T>. That is fine. However, that reasoning does not carry over to std::less<T> which is used, among other things, by associative containers as an ordering useful to meet complexity requirements.

Related issue: 348.

Proposed resolution:

Informally: Add a specialization of std::less for std::complex.

Rationale:

Discussed in Santa Cruz. An overwhelming majority of the LWG believes this should not be treated a DR: it's a request for a design change, not a defect in the existing standard. Most people (10-3) believed that we probably don't want this change, period: as with issue 348, it's hard to know where to draw the line. The LWG noted that users who want to put objects into an associative container for which operator< isn't defined can simply provide their own comparison function object.


390. CopyConstructible requirements too strict

Section: 20.1.1 [utility.arg.requirements] Status: NAD Future Submitter: Doug Gregor Date: 2002-10-24

View other active issues in [utility.arg.requirements].

View all other issues in [utility.arg.requirements].

View all issues with NAD Future status.

Discussion:

The CopyConstructible requirements in Table 30 state that for an object t of type T (where T is CopyConstructible), the expression &t returns the address of t (with type T*). This requirement is overly strict, in that it disallows types that overload operator& to not return a value of type T*. This occurs, for instance, in the Boost.Lambda library, where operator& is overloaded for a Boost.Lambda function object to return another function object.

Example:

  std::vector<int> u, v;
  int x;
  // ...
  std::transform(u.begin(), u.end(), std::back_inserter(v), _1 * x);

_1 * x returns an unnamed function object with operator& overloaded to not return T* , therefore rendering the std::transform call ill-formed. However, most standard library implementations will compile this code properly, and the viability of such binder libraries is severely hindered by the unnecessary restriction in the CopyConstructible requirements.

For reference, the address of an object can be retrieved without using the address-of operator with the following function template:

  template <typename T> T* addressof(T& v)
  {
    return reinterpret_cast<T*>(
         &const_cast<char&>(reinterpret_cast<const volatile char &>(v)));
  }

Note: this relates directly to library issue 350, which will need to be reexamined if the CopyConstructible requirements change.

Proposed resolution:

Remove the last two rows of Table 30, eliminating the requirements that &t and &u return the address of t and u, respectively.

Rationale:

This was a deliberate design decision. Perhaps it should be reconsidered for C++0x.


392. 'equivalence' for input iterators

Section: 24.1.1 [input.iterators] Status: NAD Submitter: Corwin Joy Date: 2002-12-11

View all other issues in [input.iterators].

View all issues with NAD status.

Discussion:

In section 24.1.1 [input.iterators] table 72 - 'Input Iterator Requirements' we have as a postcondition of *a: "If a==b and (a, b) is in the domain of == then *a is equivalent to *b".

In section 24.5.3.5 [istreambuf.iterator::equal] it states that "istreambuf_iterator::equal returns true if and only if both iterators are at end-of-stream, or neither is at end-of-stream, regardless of what streambuf object they use." (My emphasis).

The defect is that either 'equivalent' needs to be more precisely defined or the conditions for equality in 24.5.3.5 [istreambuf.iterator::equal] are incorrect. (Or both).

Consider the following example:

   #include <iostream>
   #include <fstream>
   #include <iterator>
   using namespace std;

   int main() {
    ifstream file1("file1.txt"), file2("file2.txt");
    istreambuf_iterator<char> f1(file1), f2(file2);
    cout << "f1 == f2 : " << boolalpha << (f1 == f2) << endl;
    cout << "f1 = " << *f1 << endl;
    cout << "f2 = " << *f2 << endl;
    return 0;
   }

Now assuming that neither f1 or f2 are at the end-of-stream then f1 == f2 by 24.5.3.5 [istreambuf.iterator::equal].

However, it is unlikely that *f1 will give the same value as *f2 except by accident.

So what does *f1 'equivalent' to *f2 mean? I think the standard should be clearer on this point, or at least be explicit that this does not mean that *f1 and *f2 are required to have the same value in the case of input iterators.

Proposed resolution:

Rationale:

The two iterators aer not in the domain of ==


393. do_in/do_out operation on state unclear

Section: 22.2.1.4.2 [locale.codecvt.virtuals] Status: Pending NAD Editorial Submitter: Alberto Barbati Date: 2002-12-24

View other active issues in [locale.codecvt.virtuals].

View all other issues in [locale.codecvt.virtuals].

View all issues with Pending NAD Editorial status.

Discussion:

this DR follows the discussion on the previous thread "codecvt::do_in not consuming external characters". It's just a clarification issue and not a request for a change.

Can do_in()/do_out() produce output characters without consuming input characters as a result of operation on state?

Proposed resolution:

Add a note at the end of 22.2.1.4.2 [locale.codecvt.virtuals], paragraph 3:

[Note: As a result of operations on state, it can return ok or partial and set from_next == from and to_next != to. --end note]

Rationale:

The submitter believes that standard already provides an affirmative answer to the question. However, the current wording has induced a few library implementors to make the incorrect assumption that do_in()/do_out() always consume at least one internal character when they succeed.

The submitter also believes that the proposed resolution is not in conflict with the related issue 76. Moreover, by explicitly allowing operations on state to produce characters, a codecvt implementation may effectively implement N-to-M translations without violating the "one character at a time" principle described in such issue. On a side note, the footnote in the proposed resolution of issue 76 that informally rules out N-to-M translations for basic_filebuf should be removed if this issue is accepted as valid.

[ Kona (2007): The proposed resolution is to add a note. Since this is non-normative, the issue is editorial, but we believe that the note is correct. Proposed Disposition: NAD, Editorial ]


399. volations of unformatted input function requirements

Section: 27.6.1.3 [istream.unformatted] Status: NAD Submitter: Martin Sebor Date: 2003-01-05

View all other issues in [istream.unformatted].

View all issues with NAD status.

Discussion:

The Effects clauses for the two functions below violate the general requirements on unformatted input functions outlined in 27.6.1.3: they do not begin by constructing a sentry object. Instead, they begin by calling widen ('\n'), which may throw an exception. The exception is then allowed to propagate from the unformatted input function irrespective of the setting of exceptions().

Note that in light of 27.6.1.1, p3 and p4, the fact that the functions allow exceptions thrown from widen() to propagate may not strictly speaking be a defect (but the fact that the functions do not start by constructing a sentry object still is). However, since an exception thrown from ctype<charT> ::widen() during any other input operation (say, from within a call to num_get<charT>::get()) will be caught and cause badbit to be set, these two functions should not be treated differently for the sake of consistency.

Proposed resolution:

Rationale:

Not a defect. The standard is consistent, and the behavior required by the standard is unambiguous. Yes, it's theoretically possible for widen to throw. (Not that this will happen for the default ctype facet or for most real-world replacement ctype facets.) Users who define ctype facets that can throw, and who care about this behavior, can use alternative signatures that don't call widen.


429. typo in basic_ios::clear(iostate)

Section: 27.4.4.3 [iostate.flags] Status: Dup Submitter: Martin Sebor Date: 2003-09-18

View all other issues in [iostate.flags].

View all issues with Dup status.

Duplicate of: 412

Discussion:

The Effects clause in 27.4.4.3, p5 describing the effects of a call to the ios_base member function clear(iostate state) says that the function only throws if the respective bits are already set prior to the function call. That's obviously not the intent. If it was, a call to clear(badbit) on an object for which (rdstate() == goodbit && exceptions() == badbit) holds would not result in an exception being thrown.

Proposed resolution:

The text ought to be changed from
"If (rdstate() & exceptions()) == 0, returns. ..."
to
"If (state & exceptions()) == 0, returns. ..."

Rationale:


433. Contradiction in specification of unexpected()

Section: 18.7.2.4 [unexpected] Status: NAD Submitter: Vyatcheslav Sysoltsev Date: 2003-09-29

View all issues with NAD status.

Discussion:

Clause 15.5.2 [except.unexpected] paragraph 1 says that "void unexpected(); is called (18.7.2) immediately after completing the stack unwinding for the former function", but 18.7.2.4 (Effects) says that "void unexpected(); . . . Calls the unexpected_handler function in effect immediately after evaluating the throwexpression (18.7.2.2),". Isn't here a contradiction: 15.5.2 requires stack have been unwound when in void unexpected() and therefore in unexpected_handler but 18.7.2.4 claims that unexpected_handler is called "in effect immediately" after evaluation of throw expression is finished, so there is no space left for stack to be unwound therefore? I think the phrase "in effect immediately" should be removed from the standard because it brings ambiguity in understanding.

Proposed resolution:

Rationale:

There is no contradiction. The phrase "in effect immediately" is just to clarify which handler is to be called.


437. Formatted output of function pointers is confusing

Section: 27.6.2.6.2 [ostream.inserters.arithmetic] Status: NAD Submitter: Ivan Godard Date: 2003-10-24

View all other issues in [ostream.inserters.arithmetic].

View all issues with NAD status.

Discussion:

Given:

void f(int) {}
void(*g)(int) = f;
cout << g;

(with the expected #include and usings), the value printed is a rather surprising "true". Rather useless too.

The standard defines:

ostream& operator<<(ostream&, void*);

which picks up all data pointers and prints their hex value, but does not pick up function pointers because there is no default conversion from function pointer to void*. Absent that, we fall back to legacy conversions from C and the function pointer is converted to bool.

There should be an analogous inserter that prints the address of a function pointer.

Proposed resolution:

Rationale:

This is indeed a wart, but there is no good way to solve it. C doesn't provide a portable way of outputting the address of a function point either.


439. Should facets be copyable?

Section: 22.2 [locale.categories] Status: NAD Submitter: Matt Austern Date: 2003-11-02

View other active issues in [locale.categories].

View all other issues in [locale.categories].

View all issues with NAD status.

Discussion:

The following facets classes have no copy constructors described in the standard, which, according to the standard, means that they are supposed to use the compiler-generated defaults. Default copy behavior is probably inappropriate. We should either make these classes uncopyable or else specify exactly what their constructors do.

Related issue: 421.

        ctype_base
        ctype
        ctype_byname
        ctype<char>
        ctype_byname<char>
        codecvt_base
        codecvt
        codecvt_byname
        num_get
        num_put
        numpunct
        numpunct_byname
        collate
        collate_byname
        time_base
        time_get
        time_get_byname
        time_put
        time_put_byname
        money_get
        money_put
        money_base
        moneypunct
        moneypunct_byname
        messages_base
        messages
        messages_byname

Proposed resolution:

Rationale:

The copy constructor in the base class is private.


440. Should std::complex use unqualified transcendentals?

Section: 26.3.8 [complex.transcendentals] Status: NAD Submitter: Matt Austern Date: 2003-11-05

View all issues with NAD status.

Discussion:

Operations like pow and exp on complex<T> are typically implemented in terms of operations like sin and cos on T. Should implementations write this as std::sin, or as plain unqualified sin?

The issue, of course, is whether we want to use argument-dependent lookup in the case where T is a user-defined type. This is similar to the issue of valarray transcendentals, as discussed in issue 226.

This issue differs from valarray transcendentals in two important ways. First, "the effect of instantiating the template complex for types other than float, double or long double is unspecified." (26.3.1 [complex.synopsis]) Second, the standard does not dictate implementation, so there is no guarantee that a particular real math function is used in the implementation of a particular complex function.

Proposed resolution:

Rationale:

If you instantiate std::complex for user-defined types, all bets are off.


447. Wrong template argument for time facets

Section: 22.1.1.1.1 [locale.category] Status: Dup Submitter: Pete Becker Date: 2003-12-26

View all other issues in [locale.category].

View all issues with Dup status.

Duplicate of: 327

Discussion:

22.1.1.1.1/4, table 52, "Required Instantiations", lists, among others:

    time_get<char,InputIterator>
    time_get_byname<char,InputIterator>
    time_get<wchar_t,OutputIterator>
    time_get_byname<wchar_t,OutputIterator>

The second argument to the last two should be InputIterator, not OutputIterator.

Proposed resolution:

Change the second template argument to InputIterator.

Rationale:


450. set::find is inconsistent with associative container requirements

Section: 23.3.3 [set] Status: Dup Submitter: Bill Plauger Date: 2004-01-30

View all other issues in [set].

View all issues with Dup status.

Duplicate of: 214

Discussion:

map/multimap have:

	iterator find(const key_type& x) const;
	const_iterator find(const key_type& x) const;

which is consistent with the table of associative container requirements. But set/multiset have:

	iterator find(const key_type&) const;

set/multiset should look like map/multimap, and honor the requirements table, in this regard.

Proposed resolution:

Rationale:


451. Associative erase should return an iterator

Section: 23.1.2 [associative.reqmts], 23.3 [associative] Status: Dup Submitter: Bill Plauger Date: 2004-01-30

View all other issues in [associative.reqmts].

View all issues with Dup status.

Duplicate of: 130

Discussion:

map/multimap/set/multiset have:

	void erase(iterator);
	void erase(iterator, iterator);

But there's no good reason why these can't return an iterator, as for vector/deque/list:

	iterator erase(iterator);
	iterator erase(iterator, iterator);

Proposed resolution:

Informally: The table of associative container requirements, and the relevant template classes, should return an iterator designating the first element beyond the erased subrange.

Rationale:


452. locale::combine should be permitted to generate a named locale

Section: 22.1.1.3 [locale.members] Status: NAD Submitter: Bill Plauger Date: 2004-01-30

View all other issues in [locale.members].

View all issues with NAD status.

Discussion:

template<class Facet>
	locale::combine(const locale&) const;

is obliged to create a locale that has no name. This is overspecification and overkill. The resulting locale should follow the usual rules -- it has a name if the locale argument has a name and Facet is one of the standard facets.

[ Sydney and post-Sydney (see c++std-lib-13439, c++std-lib-13440, c++std-lib-13443): agreed that it's overkill to say that the locale is obligated to be nameless. However, we also can't require it to have a name. At the moment, locale names are based on categories and not on individual facets. If a locale contains two different facets of different names from the same category, then this would not fit into existing naming schemes. We need to give implementations more freedom. Bill will provide wording. ]

Rationale:

After further discussion the LWG decided to close this as NAD. The fundamental problem is that names right now are per-category, not per-facet. The combine member function works at the wrong level of granularity.


466. basic_string ctor should prevent null pointer error

Section: 21.3.1 [string.require] Status: NAD Submitter: Daniel Frey Date: 2004-06-10

View all other issues in [string.require].

View all issues with NAD status.

Discussion:

Today, my colleagues and me wasted a lot of time. After some time, I found the problem. It could be reduced to the following short example:

  #include <string>
  int main() { std::string( 0 ); }

The problem is that the tested compilers (GCC 2.95.2, GCC 3.3.1 and Comeau online) compile the above without errors or warnings! The programs (at least for the GCC) resulted in a SEGV.

I know that the standard explicitly states that the ctor of string requires a char* which is not zero. STLs could easily detect the above case with a private ctor for basic_string which takes a single 'int' argument. This would catch the above code at compile time and would not ambiguate any other legal ctors.

[Redmond: No great enthusiasm for doing this. If we do, however, we want to do it for all places that take charT* pointers, not just the single-argument constructor. The other question is whether we want to catch this at compile time (in which case we catch the error of a literal 0, but not an expression whose value is a null pointer), at run time, or both.]

Proposed resolution:

Rationale:

Recommend NAD. Relegate this functionality to debugging implementations.


470. accessing containers from their elements' special functions

Section: 23 [containers] Status: NAD Submitter: Martin Sebor Date: 2004-06-28

View all other issues in [containers].

View all issues with NAD status.

Discussion:

The standard doesn't prohibit the destructors (or any other special functions) of containers' elements invoked from a member function of the container from "recursively" calling the same (or any other) member function on the same container object, potentially while the container is in an intermediate state, or even changing the state of the container object while it is being modified. This may result in some surprising (i.e., undefined) behavior.

Read email thread starting with c++std-lib-13637 for more.

Proposed resolution:

Add to Container Requirements the following new paragraph:

    Unless otherwise specified, the behavior of a program that
    invokes a container member function f from a member function
    g of the container's value_type on a container object c that
    called g from its mutating member function h, is undefined.
    I.e., if v is an element of c, directly or indirectly calling
    c.h() from v.g() called from c.f(), is undefined.

[Redmond: This is a real issue, but it's probably a clause 17 issue, not clause 23. We get the same issue, for example, if we try to destroy a stream from one of the stream's callback functions.]

Rationale:

Recommend NAD. We agree this is an issue, but not a defect. We believe that there is no wording we can put in the standard that will cover all cases without introducing unfortunate corner cases.


472. Missing "Returns" clause in std::equal_range

Section: 25.3.3.3 [equal.range] Status: Dup Submitter: Prateek R Karandikar Date: 2004-06-30

View all other issues in [equal.range].

View all issues with Dup status.

Duplicate of: 270

Discussion:

There is no "Returns:" clause for std::equal_range, which returns non-void.

Proposed resolution:

Rationale:

Fixed as part of issue 270.


476. Forward Iterator implied mutability

Section: 24.1.3 [forward.iterators] Status: NAD Submitter: Dave Abrahams Date: 2004-07-09

View all other issues in [forward.iterators].

View all issues with NAD status.

Discussion:

24.1/3 says:

Forward iterators satisfy all the requirements of the input and output iterators and can be used whenever either kind is specified

The problem is that satisfying the requirements of output iterator means that you can always assign *something* into the result of dereferencing it. That makes almost all non-mutable forward iterators non-conforming. I think we need to sever the refinement relationship between forward iterator and output iterator.

Related issue: 200. But this is not a dup.

Proposed resolution:

Rationale:

Yes, 24.1/3 does say that. But it's introductory material. The precise specification is in 24.1.3, and the requrements table there is right. We don't need to fine-tune introductory wording. (Especially since this wording is likely to be changed as part of the iterator overhaul.)


477. Operator-> for const forward iterators

Section: 24.1.3 [forward.iterators] Status: Dup Submitter: Dave Abrahams Date: 2004-07-11

View all other issues in [forward.iterators].

View all issues with Dup status.

Duplicate of: 478

Discussion:

The Forward Iterator requirements table contains the following:

 expression  return type         operational  precondition
                                  semantics
  ==========  ==================  ===========  ==========================
  a->m        U& if X is mutable, (*a).m       pre: (*a).m is well-defined.
              otherwise const U&

  r->m        U&                  (*r).m       pre: (*r).m is well-defined.

The first line is exactly right. The second line is wrong. Basically it implies that the const-ness of the iterator affects the const-ness of referenced members. But Paragraph 11 of [lib.iterator.requirements] says:

In the following sections, a and b denote values of type const X, n denotes a value of the difference type Distance, u, tmp, and m denote identifiers, r denotes a value of X&, t denotes a value of value type T, o denotes a value of some type that is writable to the output iterator.

AFAICT if we need the second line at all, it should read the same as the first line.

Related issue: 478

Proposed resolution:

Rationale:

The LWG agrees that this is a real problem. Marked as a DUP because the LWG chose to adopt the solution proposed in 478.


479. Container requirements and placement new

Section: 23.1 [container.requirements] Status: Dup Submitter: Herb Sutter Date: 2004-08-01

View other active issues in [container.requirements].

View all other issues in [container.requirements].

View all issues with Dup status.

Duplicate of: 580

Discussion:

Nothing in the standard appears to make this program ill-formed:

  struct C {
    void* operator new( size_t s ) { return ::operator new( s ); }
    // NOTE: this hides in-place and nothrow new
  };

  int main() {
    vector<C> v;
    v.push_back( C() );
  }

Is that intentional? We should clarify whether or not we intended to require containers to support types that define their own special versions of operator new.

[ Lillehammer: A container will definitely never use this overridden operator new, but whether it will fail to compile is unclear from the standard. Are containers supposed to use qualified or unqualified placement new? 20.4.1.1 is somewhat relevant, but the standard doesn't make it completely clear whether containers have to use Allocator::construct(). If containers don't use it, the details of how containers use placement new are unspecified. That is the real bug, but it needs to be fixed as part of the allocator overhaul. Weak support that the eventual solution should make this code well formed. ]

Proposed resolution:


480. unary_function and binary_function should have protected nonvirtual destructors

Section: 20.5.3 [base] Status: NAD Submitter: Joe Gottman Date: 2004-08-19

View all other issues in [base].

View all issues with NAD status.

Discussion:

The classes std::unary_function and std::binary_function are both designed to be inherited from but contain no virtual functions. This makes it too easy for a novice programmer to write code like binary_function<int, int, int> *p = new plus<int>; delete p;

There are two common ways to prevent this source of undefined behavior: give the base class a public virtual destructor, or give it a protected nonvirtual destructor. Since unary_function and binary_function have no other virtual functions, (note in particular the absence of an operator()() ), it would cost too much to give them public virtual destructors. Therefore, they should be given protected nonvirtual destructors.

Proposed resolution:

Change Paragraph 20.3.1 of the Standard from

    template <class Arg, class Result>
    struct unary_function {
        typedef Arg argument_type;
        typedef Result result_type;
    };

    template <class Arg1, class Arg2, class Result>
    struct binary_function {
        typedef Arg1 first_argument_type;
        typedef Arg2 second_argument_type;
        typedef Result result_type;
    };

to

    template <class Arg, class Result>
        struct unary_function {
        typedef Arg argument_type;
        typedef Result result_type;
    protected:
        ~unary_function() {}
    };

    template <class Arg1, class Arg2, class Result>
    struct binary_function {
        typedef Arg1 first_argument_type;
        typedef Arg2 second_argument_type;
        typedef Result result_type;
    protected:
        ~binary_function() {}
    };

Rationale:

The LWG doesn't believe the existing definition causes anybody any concrete harm.


481. unique's effects on the range [result, last)

Section: 25.2.9 [alg.unique] Status: NAD Submitter: Andrew Koenig Date: 2004-08-30

View all other issues in [alg.unique].

View all issues with NAD status.

Discussion:

The standard says that unique(first, last) "eliminates all but the first element from every consecutive group of equal elements" in [first, last) and returns "the end of the resulting range". So a postcondition is that [first, result) is the same as the old [first, last) except that duplicates have been eliminated.

What postconditions are there on the range [result, last)? One might argue that the standard says nothing about those values, so they can be anything. One might also argue that the standard doesn't permit those values to be changed, so they must not be. Should the standard say something explicit one way or the other?

Proposed resolution:

Rationale:

We don't want to make many guarantees about what's in [result, end). Maybe we aren't being quite explicit enough about not being explicit, but it's hard to think that's a major problem.


482. Swapping pairs

Section: 20.2.3 [pairs], 20.3 [tuple] Status: NAD Editorial Submitter: Andrew Koenig Date: 2004-09-14

View all other issues in [pairs].

View all issues with NAD Editorial status.

Discussion:

(Based on recent comp.std.c++ discussion)

Pair (and tuple) should specialize std::swap to work in terms of std::swap on their components. For example, there's no obvious reason why swapping two objects of type pair<vector<int>, list<double> > should not take O(1).

[Lillehammer: We agree it should be swappable. Howard will provide wording.]

[ Post Oxford: We got swap for pair but accidently missed tuple. tuple::swap is being tracked by 522. ]

Proposed resolution:

Wording provided in N1856.

Rationale:

Recommend NAD, fixed by N1856.


483. Heterogeneous equality and EqualityComparable

Section: 25.1 [alg.nonmodifying], 25.2 [alg.modifying.operations] Status: Dup Submitter: Peter Dimov Date: 2004-09-20

View all issues with Dup status.

Duplicate of: 283

Discussion:

c++std-lib-14262

[lib.alg.find] requires T to be EqualityComparable:

template <class InputIterator, class T>
   InputIterator find(InputIterator first, InputIterator last,
                      const T& value);

However the condition being tested, as specified in the Effects clause, is actually *i == value, where i is an InputIterator.

The two clauses are in agreement only if the type of *i is T, but this isn't necessarily the case. *i may have a heterogeneous comparison operator that takes a T, or a T may be convertible to the type of *i.

Further discussion (c++std-lib-14264): this problem affects a number of algorithsm in clause 25, not just find. We should try to resolve this problem everywhere it appears.

Proposed resolution:

[lib.alg.find]:

Remove [lib.alg.find]/1.

[lib.alg.count]:

Remove [lib.alg.count]/1.

[lib.alg.search]:

Remove "Type T is EqualityComparable (20.1.1), " from [lib.alg.search]/4.

[lib.alg.replace]:

Remove [lib.alg.replace]/1. Replace [lb.alg.replace]/2 with:

For every iterator i in the range [first, last) for which *i == value or pred(*i) holds perform *i = new_value.

Remove the first sentence of /4. Replace the beginning of /5 with:

For every iterator i in the range [result, result + (last - first)), assign to *i either...

(Note the defect here, current text says assign to i, not *i).

[lib.alg.fill]:

Remove "Type T is Assignable (23.1), " from /1. Replace /2 with:

For every iterator i in the range [first, last) or [first, first + n), perform *i = value.

[lib.alg.remove]:

Remove /1. Remove the first sentence of /6.

Rationale:

Duplicate of (a subset of) issue 283.


486. min/max CopyConstructible requirement is too strict

Section: 25.3.7 [alg.min.max] Status: Dup Submitter: Dave Abrahams Date: 2004-10-13

View all other issues in [alg.min.max].

View all issues with Dup status.

Duplicate of: 281

Discussion:

A straightforward implementation of these algorithms does not need to copy T.

Proposed resolution:

drop the the words "and CopyConstructible" from paragraphs 1 and 4

Rationale:


487. Allocator::construct is too limiting

Section: 20.1.2 [allocator.requirements] Status: NAD Submitter: Dhruv Matani Date: 2004-10-17

View other active issues in [allocator.requirements].

View all other issues in [allocator.requirements].

View all issues with NAD status.

Discussion:

The standard's version of allocator::construct(pointer, const_reference) severely limits what you can construct using this function. Say you can construct a socket from a file descriptor. Now, using this syntax, I first have to manually construct a socket from the fd, and then pass the constructed socket to the construct() function so it will just to an uninitialized copy of the socket I manually constructed. Now it may not always be possible to copy construct a socket eh! So, I feel that the changes should go in the allocator::construct(), making it:

    template<typename T>
    struct allocator{
      template<typename T1>
      void construct(pointer T1 const& rt1);
    };

Now, the ctor of the class T which matches the one that takes a T1 can be called! Doesn't that sound great?

Proposed resolution:

Rationale:

NAD. STL uses copying all the time, and making it possible for allocators to construct noncopyable objects is useless in the absence of corresponding container changes. We might consider this as part of a larger redesign of STL.


489. std::remove / std::remove_if wrongly specified

Section: 25.2.8 [alg.remove] Status: NAD Submitter: Thomas Mang Date: 2004-12-12

View all other issues in [alg.remove].

View all issues with NAD status.

Discussion:

In Section 25.2.7 [lib.alg.remove], paragraphs 1 to 5 describe the behavior of the mutating sequence operations std::remove and std::remove_if. However, the wording does not reflect the intended behavior [Note: See definition of intended behavior below] of these algorithms, as it is known to the C++ community [1].

1) Analysis of current wording:

25.2.7 [lib.alg.remove], paragraph 2:

Current wording says: "Effects: Eliminates all the elements referred to by iterator i in the range [first, last) for which the following corresponding conditions hold: *i == value, pred(*i) != false."

This sentences expresses specifically that all elements denoted by the (original) range [first, last) for which the corresponding condition hold will be eliminated. Since there is no formal definition of the term "eliminate" provided, the meaning of "eliminate" in everyday language implies that as postcondition, no element in the range denoted by [first, last) will hold the corresponding condition on reiteration over the range [first, last).

However, this is neither the intent [Note: See definition of intended behavior below] nor a general possible approach. It can be easily proven that if all elements of the original range[first, last) will hold the condition, it is not possible to substitute them by an element for which the condition will not hold.

25.2.7 [lib.alg.remove], paragraph 3:

Current wording says: "Returns: The end of the resulting range."

The resulting range is not specified. In combination with 25.2.7 [lib.alg.remove], paragraph 2, the only reasonable interpretation of this so-called resulting range is the range [first,last) - thus returning always the ForwardIterator 'last' parameter.

25.2.7 [lib.alg.remove], paragraph 4:

Current wording says: "Notes: Stable: the relative order of the elements that are not removed is the same as their relative order in the original range"

This sentences makes use of the term "removed", which is neither specified, nor used in a previous paragraph (which uses the term "eliminate"), nor unamgiuously separated from the name of the algorithm.

2) Description of intended behavior:

For the rest of this Defect Report, it is assumed that the intended behavior was that all elements of the range [first, last) which do not hold the condition *i == value (std::remove) or pred(*i) != false (std::remove_if)], call them s-elements [Note: s...stay], will be placed into a contiguous subrange of [first, last), denoted by the iterators [first, return value). The number of elements in the resulting range [first, return value) shall be equal to the number of s-elements in the original range [first, last). The relative order of the elements in the resulting subrange[first, return value) shall be the same as the relative order of the corresponding elements in the original range. It is undefined whether any elements in the resulting subrange [return value, last) will hold the corresponding condition, or not.

All implementations known to the author of this Defect Report comply with this intent. Since the intent of the behavior (contrary to the current wording) is also described in various utility references serving the C++ community [1], it is not expected that fixing the paragraphs will influence current code - unless the code relies on the behavior as it is described by current wording and the implementation indeed reflects the current wording, and not the intent.

3) Proposed fixes:

Change 25.2.7 [lib.alg.remove], paragraph 2 to:

"Effect: Places all the elements referred to by iterator i in the range [first, last) for which the following corresponding conditions hold : !(*i == value), pred(*i) == false into the subrange [first, k) of the original range, where k shall denote a value of type ForwardIterator. It is undefined whether any elements in the resulting subrange [k, last) will hold the corresponding condition, or not."

Comments to the new wording:

a) "Places" has no special meaning, and the everyday language meaning should fit. b) The corresponding conditions were negated compared to the current wording, becaue the new wording requires it. c) The wording "of the original range" might be redundant, since any subrange starting at 'first' and containing no more elements than the original range is implicitly a subrange of the original range [first, last). d) The iterator k was introduced instead of "return value" in order to avoid a cyclic dependency on 25.2.7/3. The wording ", where k shall denote a value of type ForwardIterator" might be redundant, because it follows implicitly by 25.2.7/3. e) "Places" does, in the author's opinion, explicitly forbid duplicating any element holding the corresponding condition in the original range [first, last) within the resulting range [first, k). If there is doubt this term might be not unambiguous regarding this, it is suggested that k is specified more closely by the following wording: "k shall denote a value of type ForwardIterator [Note: see d)] so that k - first is equal to the number of elements in the original range [first, last) for which the corresponding condition did hold". This could also be expressed as a separate paragraph "Postcondition:" f) The senctence "It is undefined whether any elements in the resulting subrange [k, last) will hold the corresponding condition, or not." was added consciously so the term "Places" does not imply if the original range [first, last) contains n elements holding the corresponding condition, the identical range[first, last) will also contain exactly n elements holding the corresponding condition after application of the algorithm.

Change 25.2.7 [lib.alg.remove], paragraph 3 to: "Returns: The iterator k."

Change 25.2.7 [lib.alg.remove], paragraph 4 to: "Notes: Stable: the relative order of the elements that are placed into the subrange [first, return value) shall be the same as their relative order was in the original range [first, last) prior to application of the algorithm."

Comments to the new wording:

a) the wording "was ... prior to application of the algorithm" is used to explicitly distinguish the original range not only by means of iterators, but also by a 'chronological' factor from the resulting range [first, return value). It might be redundant.

[1]: The wording of these references is not always unambiguous, and provided examples partially contradict verbal description of the algorithms, because the verbal description resembles the problematic wording of ISO/IEC 14882:2003.

Proposed resolution:

Rationale:

The LWG believes that the standard is sufficiently clear, and that there is no evidence of any real-world confusion about this point.


490. std::unique wrongly specified

Section: 25.2.9 [alg.unique] Status: NAD Submitter: Thomas Mang Date: 2004-12-12

View all other issues in [alg.unique].

View all issues with NAD status.

Discussion:

In Section 25.2.8 [lib.alg.unique], paragraphs 1 to 3 describe the behavior of the mutating sequence operation std::unique. However, the wording does not reflect the intended behavior [Note: See definition of intended behavior below] of these algorithms, as it is known to the C++ community [1].

1) Analysis of current wording:

25.2.8 [lib.alg.unique], paragraph 1:

Current wording says: "Effects: Eliminates all but the first element from every consecutive group of equal elements referred to by the iterator i in the range [first, last) for which the following corresponding conditions hold: *i == *(i - 1) or pred(*i, *(i -1)) != false"

This sentences expresses specifically that all elements denoted by the (original) range [first, last) which are not but the first element from a consecutive group of equal elements (where equality is defined as *i == *(i - 1) or pred(*i, *(i - 1)) ! = false) [Note: See DR 202], call them r-elements [Note: r...remove], will be eliminated. Since there is no formal definition of the term "eliminate" provided, it is undefined how this "elimination" takes place. But the meaning of "eliminate" in everyday language seems to disallow explicitly that after application of the algorithm, any r-element will remain at any position of the range [first, last) [2].

Another defect in the current wording concerns the iterators used to compare two elements for equality: The current wording contains the expression "(i - 1)", which is not covered by 25/9 [Note: See DR submitted by Thomas Mang regarding invalid iterator arithmetic expressions].

25.2.8 [lib.alg.unique], paragraph 2:

Current wording says: "Returns: The end of the resulting range."

The resulting range is not specified. In combination with 25.2.8 [lib.alg.unique], paragraph 1, one reasonable interpretation (in the author's opinion even the only possible interpretation) of this so-called resulting range is the range [first, last) - thus returning always the ForwardIterator 'last' parameter.

2) Description of intended behavior:

For the rest of this Defect Report, it is assumed that the intended behavior was that all elements denoted by the original range [first, last) which are the first element from a consecutive group of elements for which the corresponding conditions: *(i-1) == *i (for the version of unique without a predicate argument) or pred(*(i-1), *i) ! = false (for the version of unique with a predicate argument) [Note: If such a group of elements consists of only a single element, this is also considered the first element] [Note: See resolutions of DR 202], call them s-elements [Note: s...stay], will be placed into a contiguous subrange of [first, last), denoted by the iterators [first, return value). The number of elements in the resulting range [first, return value) shall be equal to the number of s-elements in the original range [first, last). Invalid iterator arithmetic expressions are expected to be resolved as proposed in DR submitted by Thomas Mang regarding invalid iterator arithmetic expressions. It is also assumed by the author that the relative order of the elements in the resulting subrange [first, return value) shall be the same as the relative order of the corresponding elements (the s-elements) in the original range [Note: If this was not intended behavior, the additional proposed paragraph about stable order will certainly become obsolete]. Furthermore, the resolutions of DR 202 are partially considered.

All implementations known to the author of this Defect Report comply with this intent [Note: Except possible effects of DR 202]. Since this intent of the behavior (contrary to the current wording) is also described in various utility references serving the C++ community [1], it is not expected that fixing the paragraphs will influence current code [Note: Except possible effects of DR 202] - unless the code relies on the behavior as it is described by current wording and the implementation indeed reflects the current wording, and not the intent.

3) Proposed fixes:

Change 25.2.8 [lib.alg.unique], paragraph 1 to:

"Effect: Places the first element from every consecutive group of elements, referred to by the iterator i in the range [first, last), for which the following conditions hold: *(i-1) == *i (for the version of unique without a predicate argument) or pred(*(i -1), *i) != false (for the version of unique with a predicate argument), into the subrange [first, k) of the original range, where k shall denote a value of type ForwardIterator."

Comments to the new wording:

a) The new wording was influenced by the resolutions of DR 202. If DR 202 is resolved in another way, the proposed wording need also additional review. b) "Places" has no special meaning, and the everyday language meaning should fit. c) The expression "(i - 1)" was left, but is expected that DR submitted by Thomas Mang regarding invalid iterator arithmetic expressions will take this into account. d) The wording "(for the version of unique without a predicate argument)" and "(for the version of unique with a predicate argument)" was added consciously for clarity and is in resemblence with current 23.2.2.4 [lib.list.ops], paragraph 19. It might be considered redundant. e) The wording "of the original range" might be redundant, since any subrange starting at first and containing no more elements than the original range is implicitly a subrange of the original range [first, last). f) The iterator k was introduced instead of "return value" in order to avoid a cyclic dependency on 25.2.8 [lib.alg.unique], paragraph 2. The wording ", where k shall denote a value of type ForwardIterator" might be redundant, because it follows implicitly by 25.2.8 [lib.alg.unique], paragraph 2. g) "Places" does, in the author's opinion, explicitly forbid duplicating any s-element in the original range [first, last) within the resulting range [first, k). If there is doubt this term might be not unambiguous regarding this, it is suggested that k is specified more closely by the following wording: "k shall denote a value of type ForwardIterator [Note: See f)] so that k - first is equal to the number of elements in the original range [first, last) being the first element from every consecutive group of elements for which the corresponding condition did hold". This could also be expressed as a separate paragraph "Postcondition:". h) If it is considered that the wording is unclear whether it declares the element of a group which consists of only a single element implicitly to be the first element of this group [Note: Such an interpretation could eventually arise especially in case last - first == 1] , the following additional sentence is proposed: "If such a group of elements consists of only a single element, this element is also considered the first element."

Change 25.2.8 [lib.alg.unique], paragraph 2 to: "Returns: The iterator k."

Add a separate paragraph "Notes:" as 25.2.8 [lib.alg.unique], paragraph 2a or 3a, or a separate paragraph "Postcondition:" before 25.2.8 [lib.alg.unique], paragraph 2 (wording inside {} shall be eliminated if the preceding expressions are used, or the preceding expressions shall be eliminated if wording inside {} is used):

"Notes:{Postcondition:} Stable: the relative order of the elements that are placed into the subrange [first, return value {k}) shall be the same as their relative order was in the original range [first, last) prior to application of the algorithm."

Comments to the new wording:

a) It is assumed by the author that the algorithm was intended to be stable. In case this was not the intent, this paragraph becomes certainly obsolete. b) The wording "was ... prior to application of the algorithm" is used to explicitly distinguish the original range not only by means of iterators, but also by a 'chronological' factor from the resulting range [first, return value). It might be redundant.

25.2.8 [lib.alg.unique], paragraph 3:

See DR 239.

4) References to other DRs:

See DR 202, but which does not address any of the problems described in this Defect Report [Note: This DR is supposed to complement DR 202]. See DR 239. See DR submitted by Thomas Mang regarding invalid iterator arithmetic expressions.

[1]: The wording of these references is not always unambiguous, and provided examples partially contradict verbal description of the algorithms, because the verbal description resembles the problematic wording of ISO/IEC 14882:2003.

[2]: Illustration of conforming implementations according to current wording:

One way the author of this DR considers how this "elimination" could be achieved by a conforming implementation according to current wording is by substituting each r-element by _any_ s-element [Note: s...stay; any non-r-element], since all r-elements are "eliminated".

In case of a sequence consisting of elements being all 'equal' [Note: See DR 202], substituting each r-element by the single s-element is the only possible solution according to current wording.

Proposed resolution:

Rationale:

The LWG believes the standard is sufficiently clear. No implementers get it wrong, and changing it wouldn't cause any code to change, so there is no real-world harm here.


491. std::list<>::unique incorrectly specified

Section: 23.2.3.4 [list.ops] Status: NAD Submitter: Thomas Mang Date: 2004-12-12

View all other issues in [list.ops].

View all issues with NAD status.

Discussion:

In Section 23.2.3.4 [list.ops], paragraphs 19 to 21 describe the behavior of the std::list<T, Allocator>::unique operation. However, the current wording is defective for various reasons.

1) Analysis of current wording:

23.2.3.4 [list.ops], paragraph 19:

Current wording says: "Effects: Eliminates all but the first element from every consecutive group of equal elements referred to by the iterator i in the range [first + 1, last) for which *i == *(i - 1) (for the version of unique with no argument) or pred(*i, *(i -1)) (for the version of unique with a predicate argument) holds."

This sentences makes use of the undefined term "Eliminates". Although it is, to a certain degree, reasonable to consider the term "eliminate" synonymous with "erase", using "Erase" in the first place, as the wording of 23.2.3.4 [list.ops], paragraph 15 does, would be clearer.

The range of the elements referred to by iterator i is "[first + 1, last)". However, neither "first" nor "last" is defined.

The sentence makes three times use of iterator arithmetic expressions ( "first + 1", "*i == *(i - 1)", "pred(*i, *(i -1))" ) which is not defined for bidirectional iterator [see DR submitted by Thomas Mang regarding invalid iterator arithmetic expressions].

The same problems as pointed out in DR 202 (equivalence relation / order of arguments for pred()) apply to this paragraph.

23.2.3.4 [list.ops], paragraph 20:

Current wording says: "Throws: Nothing unless an exception in thrown by *i == *(i-1) or pred(*i, *(i - 1))"

The sentence makes two times use of invalid iterator arithmetic expressions ( "*i == *(i - 1)", "pred(*i, *(i -1))" ).

[Note: Minor typos: "in" / missing dot at end of sentence.]

23.2.3.4 [list.ops], paragraph 21:

Current wording says: "Complexity: If the range (last - first) is not empty, exactly (last - first) - 1 applications of the corresponding predicate, otherwise no application of the predicate.

See DR 315 regarding "(last - first)" not yielding a range.

Invalid iterator arithmetic expression "(last - first) - 1" left .

2) Description of intended behavior:

For the rest of this Defect Report, it is assumed that "eliminate" is supposed to be synonymous to "erase", that "first" is equivalent to an iterator obtained by a call to begin(), "last" is equivalent to an iterator obtained by a call to end(), and that all invalid iterator arithmetic expressions are resolved as described in DR submitted by Thomas Mang regarding invalid iterator arithmetic expressions.

Furthermore, the resolutions of DR 202 are considered regarding equivalence relation and order of arguments for a call to pred.

All implementations known to the author of this Defect Report comply with these assumptions, apart from the impact of the alternative resolution of DR 202. Except for the changes implied by the resolutions of DR 202, no impact on current code is expected.

3) Proposed fixes:

Change 23.2.3.4 [list.ops], paragraph 19 to:

"Effect: Erases all but the first element from every consecutive group of elements, referred to by the iterator i in the range [begin(), end()), for which the following conditions hold: *(i-1) == *i (for the version of unique with no argument) or pred(*(i-1), *i) != false (for the version of unique with a predicate argument)."

Comments to the new wording:

a) The new wording was influenced by DR 202 and the resolutions presented there. If DR 202 is resolved in another way, the proposed wording need also additional review. b) "Erases" refers in the author's opinion unambiguously to the member function "erase". In case there is doubt this might not be unamgibuous, a direct reference to the member function "erase" is suggested [Note: This would also imply a change of 23.2.3.4 [list.ops], paragraph 15.]. c) The expression "(i - 1)" was left, but is expected that DR submitted by Thomas Mang regarding invalid iterator arithmetic expressions will take this into account. d) The wording "(for the version of unique with no argument)" and "(for the version of unique with a predicate argument)" was kept consciously for clarity. e) "begin()" substitutes "first", and "end()" substitutes "last". The range need adjustment from "[first + 1, last)" to "[begin(), end())" to ensure a valid range in case of an empty list. f) If it is considered that the wording is unclear whether it declares the element of a group which consists of only a single element implicitly to be the first element of this group [Note: Such an interpretation could eventually arise especially in case size() == 1] , the following additional sentence is proposed: "If such a group of elements consists of only a single element, this element is also considered the first element."

Change 23.2.3.4 [list.ops], paragraph 20 to:

"Throws: Nothing unless an exception is thrown by *(i-1) == *i or pred(*(i-1), *i)."

Comments to the new wording:

a) The wording regarding the conditions is identical to proposed 23.2.3.4 [list.ops], paragraph 19. If 23.2.3.4 [list.ops], paragraph 19 is resolved in another way, the proposed wording need also additional review. b) The expression "(i - 1)" was left, but is expected that DR submitted by Thomas Mang regarding invalid iterator arithmetic expressions will take this into account. c) Typos fixed.

Change 23.2.3.4 [list.ops], paragraph 21 to:

"Complexity: If empty() == false, exactly size() - 1 applications of the corresponding predicate, otherwise no applications of the corresponding predicate."

Comments to the new wording:

a) The new wording is supposed to also replace the proposed resolution of DR 315, which suffers from the problem of undefined "first" / "last".

5) References to other DRs:

See DR 202. See DR 239. See DR 315. See DR submitted by Thomas Mang regarding invalid iterator arithmetic expressions.

Proposed resolution:

Rationale:

"All implementations known to the author of this Defect Report comply with these assumption", and "no impact on current code is expected", i.e. there is no evidence of real-world confusion or harm.


493. Undefined Expression in Input Iterator Note Title

Section: 24.1.1 [input.iterators] Status: NAD Submitter: Chris Jefferson Date: 2004-12-13

View all other issues in [input.iterators].

View all issues with NAD status.

Discussion:

1) In 24.1.1/3, the following text is currently present.

"Note: For input iterators, a==b does not imply ++a=++b (Equality does not guarantee the substitution property or referential transparency)."

However, when in Table 72, part of the definition of ++r is given as:

"pre: r is dereferenceable. post: any copies of the previous value of r are no longer required either to be dereferenceable ..."

While a==b does not imply that b is a copy of a, this statement should perhaps still be made more clear.

2) There are no changes to intended behaviour

3) This Note should be altered to say "Note: For input iterators a==b, when its behaviour is defined ++a==++b may still be false (Equality does not guarantee the substitution property or referential transparency).

Proposed resolution:

Rationale:

This is descriptive text, not normative, and the meaning is clear.


494. Wrong runtime complexity for associative container's insert and delete

Section: 23.1.2 [associative.reqmts] Status: NAD Submitter: Hans B os Date: 2004-12-19

View all other issues in [associative.reqmts].

View all issues with NAD status.

Discussion:

According to [lib.associative.reqmts] table 69, the runtime comlexity of insert(p, t) and erase(q) can be done in amortized constant time.

It was my understanding that an associative container could be implemented as a balanced binary tree.

For inser(p, t), you 'll have to iterate to p's next node to see if t can be placed next to p. Furthermore, the insertion usually takes place at leaf nodes. An insert next to the root node will be done at the left of the root next node

So when p is the root node you 'll have to iterate from the root to its next node, which takes O(log(size)) time in a balanced tree.

If you insert all values with insert(root, t) (where root is the root of the tree before insertion) then each insert takes O(log(size)) time. The amortized complexity per insertion will be O(log(size)) also.

For erase(q), the normal algorithm for deleting a node that has no empty left or right subtree, is to iterate to the next (or previous), which is a leaf node. Then exchange the node with the next and delete the leaf node. Furthermore according to DR 130, erase should return the next node of the node erased. Thus erasing the root node, requires iterating to the next node.

Now if you empty a map by deleting the root node until the map is empty, each operation will take O(log(size)), and the amortized complexity is still O(log(size)).

The operations can be done in amortized constant time if iterating to the next node can be done in (non amortized) constant time. This can be done by putting all nodes in a double linked list. This requires two extra links per node. To me this is a bit overkill since you can already efficiently insert or erase ranges with erase(first, last) and insert(first, last).

Proposed resolution:

Rationale:

Only "amortized constant" in special circumstances, and we believe that's implementable. That is: doing this N times will be O(N), not O(log N).


499. Std. doesn't seem to require stable_sort() to be stable!

Section: 25.3.1.2 [stable.sort] Status: NAD Editorial Submitter: Prateek Karandikar Date: 2005-04-12

View all issues with NAD Editorial status.

Discussion:

17.3.1.1 Summary

1 The Summary provides a synopsis of the category, and introduces the first-level subclauses. Each subclause also provides a summary, listing the headers specified in the subclause and the library entities provided in each header.

2 Paragraphs labelled "Note(s):" or "Example(s):" are informative, other paragraphs are normative.

So this means that a "Notes" paragraph wouldn't be normative.

25.3.1.2 stable_sort

template<class RandomAccessIterator> 
void stable_sort(RandomAccessIterat or first, RandomAccessIterator last); 

template<class RandomAccessIterator, class Compare> 
void stable_sort(RandomAccessIterat or first, RandomAccessIterator last, Compare comp);

1 Effects: Sorts the elements in the range [first, last).

2 Complexity: It does at most N(log N)^2 (where N == last - first) comparisons; if enough extra memory is available, it is N log N.

3 Notes: Stable: the relative order of the equivalent elements is preserved.

The Notes para is informative, and nowhere else is stability mentioned above.

Also, I just searched for the word "stable" in my copy of the Standard. and the phrase "Notes: Stable: the relative order of the elements..." is repeated several times in the Standard library clauses for describing various functions. How is it that stability is talked about in the informative paragraph? Or am I missing something obvious?

Proposed resolution:

Rationale:

This change has already been made.


500. do_length cannot be implemented correctly

Section: 22.2.1.5 [locale.codecvt.byname] Status: NAD Submitter: Krzysztof Żelechowski Date: 2005-05-24

View all other issues in [locale.codecvt.byname].

View all issues with NAD status.

Discussion:

  1. codecvt::do_length is of type int;
  2. it is assumed to be sort-of returning from_next - from of type ptrdiff_t;
  3. ptrdiff_t cannot be cast to an int without data loss.

Contradiction.

Proposed resolution:


501. Proposal: strengthen guarantees of lib.comparisons

Section: 20.5.3 [base] Status: NAD Submitter: Me <anti_spam_email2003@yahoo.com> Date: 2005-06-07

View all other issues in [base].

View all issues with NAD status.

Discussion:

"For templates greater, less, greater_equal, and less_equal, the specializations for any pointer type yield a total order, even if the built-in operators <, >, <=, >= do not."

The standard should do much better than guarantee that these provide a total order, it should guarantee that it can be used to test if memory overlaps, i.e. write a portable memmove. You can imagine a platform where the built-in operators use a uint32_t comparison (this tests for overlap on this platform) but the less<T*> functor is allowed to be defined to use a int32_t comparison. On this platform, if you use std::less with the intent of making a portable memmove, comparison on an array that straddles the 0x7FFFFFFF/0x8000000 boundary can give incorrect results.

Proposed resolution:

Add a footnote to 20.5.3/8 saying:

Given a p1 and p2 such that p1 points to N objects of type T and p2 points to M objects of type T. If [p1,p1+N) does not overlap [p2,p2+M), less returns the same value when comparing all pointers in [p1,p1+N) to all pointers in [p2,p2+M). Otherwise, there is a value Q and a value R such that less returns the same value when comparing all pointers in [p1,p1+Q) to all pointers in [p2,p2+R) and an opposite value when comparing all pointers in [p1+Q,p1+N) to all pointers in [p2+R,p2+M). For the sake of completeness, the null pointer value (4.10) for T is considered to be an array of 1 object that doesn't overlap with any non-null pointer to T. less_equal, greater, greater_equal, equal_to, and not_equal_to give the expected results based on the total ordering semantics of less. For T of void, treat it as having similar semantics as T of char i.e. less<cv T*>(a, b) gives the same results as less<cv void*>(a, b) which gives the same results as less<cv char*>((cv char*)(cv void*)a, (cv char*)(cv void*)b).

I'm also thinking there should be a footnote to 20.5.3/1 saying that if A and B are similar types (4.4/4), comp<A>(a,b) returns the same value as comp<B>(a,b) (where comp is less, less_equal, etc.). But this might be problematic if there is some really funky operator overloading going on that does different things based on cv (that should be undefined behavior if somebody does that though). This at least should be guaranteed for all POD types (especially pointers) that use the built-in comparison operators.

Rationale:

less is already required to provide a strict weak ordering which is good enough to detect overlapping memory situations.


504. Integer types in pseudo-random number engine requirements

Section: 26.4.1 [rand.req], TR1 5.1.1 [tr.rand.req] Status: NAD Editorial Submitter: Walter Brown Date: 2005-07-03

View all other issues in [rand.req].

View all issues with NAD Editorial status.

Discussion:

In [tr.rand.req], Paragraph 2 states that "... s is a value of integral type, g is an ... object returning values of unsigned integral type ..."

Proposed resolution:

In 5.1.1 [tr.rand.req], Paragraph 2 replace

... s is a value of integral type, g is an lvalue of a type other than X that defines a zero-argument function object returning values of unsigned integral type unsigned long int, ...

In 5.1.1 [tr.rand.seq], Table 16, replace in the line for X(s)

creates an engine with the initial internal state determined by static_cast<unsigned long>(s)

[ Mont Tremblant: Both s and g should be unsigned long. This should refer to the constructor signatures. Jens provided wording post Mont Tremblant. ]

[ Berlin: N1932 adopts the proposed resolution: see 26.3.1.3/1e and Table 3 row 2. Moved to Ready. ]

Rationale:

Jens: Just requiring X(unsigned long) still makes it possible for an evil library writer to also supply a X(int) that does something unexpected. The wording above requires that X(s) always performs as if X(unsigned long) would have been called. I believe that is sufficient and implements our intentions from Mont Tremblant. I see no additional use in actually requiring a X(unsigned long) signature. u.seed(s) is covered by its reference to X(s), same arguments.

[ Portland: Subsumed by N2111. ]


506. Requirements of Distribution parameter for variate_generator

Section: 26.4 [rand], TR1 5.1.3 [tr.rand.var] Status: NAD Submitter: Walter Brown Date: 2005-07-03

View all other issues in [rand].

View all issues with NAD status.

Discussion:

Paragraph 3 requires that template argument U (which corresponds to template parameter Engine) satisfy all uniform random number generator requirements. However, there is no analogous requirement regarding the template argument that corresponds to template parameter Distribution. We believe there should be, and that it should require that this template argument satisfy all random distribution requirements.

Proposed resolution:

Consequence 1: Remove the precondition clauses [tr.rand.var]/16 and /18.

Consequence 2: Add max() and min() functions to those distributions that do not already have them.

[ Mont Tremblant: Jens reccommends NAD, min/max not needed everywhere. Marc supports having min and max to satisfy generic programming interface. ]

Rationale:

Berlin: N1932 makes this moot: variate_generator has been eliminated.


509. Uniform_int template parameters

Section: 26.4.8.1 [rand.dist.uni], TR1 5.1.7.1 [tr.rand.dist.iunif] Status: NAD Submitter: Walter Brown Date: 2005-07-03

View all issues with NAD status.

Discussion:

In [tr.rand.dist.iunif] the uniform_int distribution currently has a single template parameter, IntType, used as the input_type and as the result_type of the distribution. We believe there is no reason to conflate these types in this way.

Proposed resolution:

We recommend that there be a second template parameter to reflect the distribution's input_type, and that the existing first template parameter continue to reflect (solely) the result_type:

template< class IntType = int, UIntType = unsigned int >
class uniform_int
{
public:
  // types
  typedef  UIntType  input_type;
  typedef  IntType   result_type;

[ Berlin: Moved to NAD. N1932 makes this moot: the input_type template parameter has been eliminated. ]


510. Input_type for bernoulli_distribution

Section: 26.4.8.2 [rand.dist.bern], TR1 5.1.7.2 [tr.rand.dist.bern] Status: NAD Submitter: Walter Brown Date: 2005-07-03

View all issues with NAD status.

Discussion:

In [tr.rand.dist.bern] the distribution currently requires;

typedef  int  input_type;

Proposed resolution:

We believe this is an unfortunate choice, and recommend instead:

typedef  unsigned int  input_type;

[ Berlin: Moved to NAD. N1932 makes this moot: the input_type template parameter has been eliminated. ]


511. Input_type for binomial_distribution

Section: 26.4.8 [rand.dist], TR1 5.1.7.5 [tr.rand.dist.bin] Status: NAD Submitter: Walter Brown Date: 2005-07-03

View all other issues in [rand.dist].

View all issues with NAD status.

Discussion:

Unlike all other distributions in TR1, this binomial_distribution has an implementation-defined input_type. We believe this is an unfortunate choice, because it hinders users from writing portable code. It also hinders the writing of compliance tests. We recommend instead:

typedef  RealType  input_type;

While this choice is somewhat arbitrary (as it was for some of the other distributions), we make this particular choice because (unlike all other distributions) otherwise this template would not publish its RealType argument and so users could not write generic code that accessed this second template parameter. In this respect, the choice is consistent with the other distributions in TR1.

We have two reasons for recommending that a real type be specified instead. One reason is based specifically on characteristics of binomial distribution implementations, while the other is based on mathematical characteristics of probability distribution functions in general.

Implementations of binomial distributions commonly use Stirling approximations for values in certain ranges. It is far more natural to use real values to represent these approximations than it would be to use integral values to do so. In other ranges, implementations reply on the Bernoulli distribution to obtain values. While TR1's bernoulli_distribution::input_type is specified as int, we believe this would be better specified as double.

This brings us to our main point: The notion of a random distribution rests on the notion of a cumulative distribution function, which in turn mathematically depends on a continuous dependent variable. Indeed, such a distribution function would be meaningless if it depended on discrete values such as integers - and this remains true even if the distribution function were to take discrete steps.

Although this note is specifically about binomial_distribution::input_type, we intend to recommend that all of the random distributions input_types be specified as a real type (either a RealType template parameter, or double, as appropriate).

Of the nine distributions in TR1, four already have this characteristic (uniform_real, exponential_distribution, normal_distribution, and gamma_distribution). We have already argued the case for the binomial the remaining four distributions.

In the case of uniform_int, we believe that the calculations to produce an integer result in a specified range from an integer in a different specified range is best done using real arithmetic. This is because it involves a product, one of whose terms is the ratio of the extents of the two ranges. Without real arithmetic, the results become less uniform: some numbers become more (or less) probable that they should be. This is, of course, undesireable behavior in a uniform distribution.

Finally, we believe that in the case of the bernoulli_distribution (briefly mentioned earlier), as well as the cases of the geometric_distribution and the poisson_distribution, it would be far more natural to have a real input_type. This is because the most natural computation involves the random number delivered and the distribution's parameter p (in the case of bernoulli_distribution, for example, the computation is a comparison against p), and p is already specified in each case as having some real type.

Proposed resolution:

typedef  RealType  input_type;

[ Berlin: Moved to NAD. N1932 makes this moot: the input_type template parameter has been eliminated. ]


512. Seeding subtract_with_carry_01 from a single unsigned long

Section: 26.4.3 [rand.eng], TR1 5.1.4.4 [tr.rand.eng.sub1] Status: NAD Editorial Submitter: Walter Brown Date: 2005-07-03

View all other issues in [rand.eng].

View all issues with NAD Editorial status.

Discussion:

Paragraph 8 specifies the algorithm by which a subtract_with_carry_01 engine is to be seeded given a single unsigned long. This algorithm is seriously flawed in the case where the engine parameter w (also known as word_size) exceeds 31 [bits]. The key part of the paragraph reads:

sets x(-r) ... x(-1) to (lcg(1)*2**(-w)) mod 1

and so forth.

Since the specified linear congruential engine, lcg, delivers numbers with a maximum of 2147483563 (just a shade under 31 bits), then when w is, for example, 48, each of the x(i) will be less than 2**-17. The consequence is that roughly the first 400 numbers delivered will be conspicuously close to either zero or one.

Unfortunately, this is not an innocuous flaw: One of the predefined engines in [tr.rand.predef], namely ranlux64_base_01, has w = 48 and would exhibit this poor behavior, while the original N1378 proposal states that these pre-defined engines are intended to be of "known good properties."

Proposed resolution:

In 5.1.4.4 [tr.rand.eng.sub1], replace the "effects" clause for void seed(unsigned long value = 19780503) by

Effects: If value == 0, sets value to 19780503. In any case, with a linear congruential generator lcg(i) having parameters mlcg = 2147483563, alcg = 40014, clcg = 0, and lcg(0) = value, sets carry(-1) and x(-r) … x(-1) as if executing


linear_congruential<unsigned long, 40014, 0, 2147483563> lcg(value);
seed(lcg);

to (lcg(1) · 2-w) mod 1 … (lcg(r) · 2-w) mod 1, respectively. If x(-1) == 0, sets carry(-1) = 2-w, else sets carry(-1) = 0.

[ Jens provided revised wording post Mont Tremblant. ]

[ Berlin: N1932 adopts the originally-proposed resolution of the issue. Jens's supplied wording is a clearer description of what is intended. Moved to Ready. ]

Rationale:

Jens: I'm using an explicit type here, because fixing the prose would probably not qualify for the (with issue 504 even stricter) requirements we have for seed(Gen&).

[ Portland: Subsumed by N2111. ]


513. Size of state for subtract_with_carry_01

Section: 26.4.3 [rand.eng], TR1 5.1.4.4 [tr.rand.eng.sub1] Status: NAD Editorial Submitter: Walter Brown Date: 2005-07-03

View all other issues in [rand.eng].

View all issues with NAD Editorial status.

Discussion:

Paragraph 3 begins:

The size of the state is r.

However, this is not quite consistent with the remainder of the paragraph which specifies a total of nr+1 items in the textual representation of the state. We recommend the sentence be corrected to match:

The size of the state is nr+1.

To give meaning to the coefficient n, it may be also desirable to move n's definition from later in the paragraph. Either of the following seem reasonable formulations:

With n=..., the size of the state is nr+1.

The size of the state is nr+1, where n=... .

Proposed resolution:

[ Jens: I plead for "NAD" on the grounds that "size of state" is only used as an argument for big-O complexity notation, thus constant factors and additions don't count. ]

[ Berlin: N1932 adopts the proposed NAD. ]


514. Size of state for subtract_with_carry

Section: 26.4.3.3 [rand.eng.sub], TR1 5.1.4.3 [tr.rand.eng.sub] Status: NAD Editorial Submitter: Walter Brown Date: 2005-07-03

View all issues with NAD Editorial status.

Discussion:

Paragraph 2 begins:

The size of the state is r.

However, the next sentence specifies a total of r+1 items in the textual representation of the state, r specific x's as well as a specific carry. This makes a total of r+1 items that constitute the size of the state, rather than r.

Proposed resolution:

We recommend the sentence be corrected to match:

The size of the state is r+1.

[ Jens: I plead for "NAD" on the grounds that "size of state" is only used as an argument for big-O complexity notation, thus constant factors and additions don't count. ]

[ Berlin: N1932 adopts the proposed NAD. ]


515. Random number engine traits

Section: 26.4.2 [rand.synopsis], TR1 5.1.2 [tr.rand.synopsis] Status: NAD Submitter: Walter Brown Date: 2005-07-03

View all other issues in [rand.synopsis].

View all issues with NAD status.

Discussion:

To accompany the concept of a pseudo-random number engine as defined in Table 17, we propose and recommend an adjunct template, engine_traits, to be declared in [tr.rand.synopsis] as:

template< class PSRE >
class engine_traits;

This template's primary purpose would be as an aid to generic programming involving pseudo-random number engines. Given only the facilities described in tr1, it would be very difficult to produce any algorithms involving the notion of a generic engine. The intent of this proposal is to provide, via engine_traits<>, sufficient descriptive information to allow an algorithm to employ a pseudo-random number engine without regard to its exact type, i.e., as a template parameter.

For example, today it is not possible to write an efficient generic function that requires any specific number of random bits. More specifically, consider a cryptographic application that internally needs 256 bits of randomness per call:

template< class Eng, class InIter, class OutIter >
void crypto( Eng& e, InIter in, OutIter out );

Without knowning the number of bits of randomness produced per call to a provided engine, the algorithm has no means of determining how many times to call the engine.

In a new section [tr.rand.eng.traits], we proposed to define the engine_traits template as:

template< class PSRE >
class engine_traits
{
  static  std::size_t  bits_of_randomness = 0u;
  static  std::string  name()  { return "unknown_engine"; }
  // TODO: other traits here
};

Further, each engine described in [tr.rand.engine] would be accompanied by a complete specialization of this new engine_traits template.

Proposed resolution:

[ Berlin: Walter: While useful for implementation per TR1, N1932 has no need for this feature. Recommend close as NAD. ]

Rationale:

Recommend NAD, N1932, N2111 covers this. Already in WP.


516. Seeding subtract_with_carry_01 using a generator

Section: 26.4.3 [rand.eng], TR1 5.1.4.4 [tr.rand.eng.sub1] Status: NAD Editorial Submitter: Walter Brown Date: 2005-07-03

View all other issues in [rand.eng].

View all issues with NAD Editorial status.

Discussion:

Paragraph 6 says:

... obtained by successive invocations of g, ...

We recommend instead:

... obtained by taking successive invocations of g mod 2**32, ...

as the context seems to require only 32-bit quantities be used here.

Proposed resolution:

Berlin: N1932 adopts the proposed resultion: see 26.3.3.4/7. Moved to Ready.

[ Portland: Subsumed by N2111. ]


517. Should include name in external representation

Section: 26.4.1 [rand.req], TR1 5.1.1 [tr.rand.req] Status: NAD Submitter: Walter Brown Date: 2005-07-03

View all other issues in [rand.req].

View all issues with NAD status.

Discussion:

The last two rows of Table 16 deal with the i/o requirements of an engine, specifying that the textual representation of an engine's state, appropriately formatted, constitute the engine's external representation.

This seems adequate when an engine's type is known. However, it seems inadequate in the context of generic code, where it becomes useful and perhaps even necessary to determine an engine's type via input.

Proposed resolution:

We therefore recommend that, in each of these two rows of Table 16, the text "textual representation" be expanded so as to read "engine name followed by the textual representation."

[ Berlin: N1932 considers this NAD. This is a QOI issue. ]


525. type traits definitions not clear

Section: 20.4.4 [meta.unary], TR1 4.5 [tr.meta.unary] Status: NAD Editorial Submitter: Robert Klarer Date: 2005-07-11

View all issues with NAD Editorial status.

Discussion:

It is not completely clear how the primary type traits deal with cv-qualified types. And several of the secondary type traits seem to be lacking a definition.

[ Berlin: Howard to provide wording. ]

Proposed resolution:

Wording provided in N2028. A revision (N2157) provides more detail for motivation.

Rationale:

Solved by revision (N2157) in the WP.

526. Is it undefined if a function in the standard changes in parameters?

Section: 23.1.1 [sequence.reqmts] Status: NAD Submitter: Chris Jefferson Date: 2005-09-14

View all other issues in [sequence.reqmts].

View all issues with NAD status.

Discussion:

Problem: There are a number of places in the C++ standard library where it is possible to write what appear to be sensible ways of calling functions, but which can cause problems in some (or all) implementations, as they cause the values given to the function to be changed in a way not specified in standard (and therefore not coded to correctly work). These fall into two similar categories.

1) Parameters taken by const reference can be changed during execution of the function

Examples:

Given std::vector<int> v:

v.insert(v.begin(), v[2]);

v[2] can be changed by moving elements of vector

Given std::list<int> l:

l.remove(*l.begin());

Will delete the first element, and then continue trying to access it. This is particularily vicious, as it will appear to work in almost all cases.

2) A range is given which changes during the execution of the function: Similarly,

v.insert(v.begin(), v.begin()+4, v.begin()+6);

This kind of problem has been partly covered in some cases. For example std::copy(first, last, result) states that result cannot be in the range [first, last). However, does this cover the case where result is a reverse_iterator built from some iterator in the range [first, last)? Also, std::copy would still break if result was reverse_iterator(last + 1), yet this is not forbidden by the standard

Solution:

One option would be to try to more carefully limit the requirements of each function. There are many functions which would have to be checked. However as has been shown in the std::copy case, this may be difficult. A simpler, more global option would be to somewhere insert text similar to:

If the execution of any function would change either any values passed by reference or any value in any range passed to a function in a way not defined in the definition of that function, the result is undefined.

Such code would have to at least cover chapters 23 and 25 (the sections I read through carefully). I can see no harm on applying it to much of the rest of the standard.

Some existing parts of the standard could be improved to fit with this, for example the requires for 25.2.1 (Copy) could be adjusted to:

Requires: For each non-negative integer n < (last - first), assigning to *(result + n) must not alter any value in the range [first + n, last).

However, this may add excessive complication.

One other benefit of clearly introducing this text is that it would allow a number of small optimisations, such as caching values passed by const reference.

Matt Austern adds that this issue also exists for the insert and erase members of the ordered and unordered associative containers.

[ Berlin: Lots of controversey over how this should be solved. Lots of confusion as to whether we're talking about self referencing iterators or references. Needs a good survey as to the cases where this matters, for which implementations, and how expensive it is to fix each case. ]

Proposed resolution:

Rationale:

Recommend NAD.


528. const_iterator iterator issue when they are the same type

Section: 23.4 [unord], TR1 6.3.4 [tr.unord.unord] Status: NAD Submitter: Paolo Carlini Date: 2005-10-12

View other active issues in [unord].

View all other issues in [unord].

View all issues with NAD status.

Discussion:

while implementing the resolution of issue 6.19 I'm noticing the following: according to 6.3.4.3/2 (and 6.3.4.5/2), for unordered_set and unordered_multiset:

"The iterator and const_iterator types are both const types. It is unspecified whether they are the same type"

Now, according to the resolution of 6.19, we have overloads of insert with hint and erase (single and range) both for iterator and const_iterator, which, AFAICS, can be meaningful at the same time *only* if iterator and const_iterator *are* in fact different types.

Then, iterator and const_iterator are *required* to be different types? Or that is an unintended consequence? Maybe the overloads for plain iterators should be added only to unordered_map and unordered_multimap? Or, of course, I'm missing something?

Proposed resolution:

Add to 6.3.4.3p2 (and 6.3.4.5p2):

2 ... The iterator and const_iterator types are both const constant iterator types. It is unspecified whether they are the same type.

Add a new subsection to 17.4.4 [lib.conforming]:

An implementation shall not supply an overloaded function signature specified in any library clause if such a signature would be inherently ambiguous during overload resolution due to two library types referring to the same type.

[Note: For example, this occurs when a container's iterator and const_iterator types are the same. -- end note]

[ Post-Berlin: Beman supplied wording. ]

Rationale:

Toronto: The first issue has been fixed by N2350 (the insert and erase members are collapsed into one signature). Alisdair to open a separate issue on the chapter 17 wording.

532. Tuple comparison

Section: 20.3.1.5 [tuple.rel], TR1 6.1.3.5 [tr.tuple.rel] Status: Pending NAD Editorial Submitter: David Abrahams Date: 2005-11-29

View all issues with Pending NAD Editorial status.

Discussion:

Where possible, tuple comparison operators <,<=,=>, and > ought to be defined in terms of std::less rather than operator<, in order to support comparison of tuples of pointers.

Proposed resolution:

change 6.1.3.5/5 from:

Returns: The result of a lexicographical comparison between t and u. The result is defined as: (bool)(get<0>(t) < get<0>(u)) || (!(bool)(get<0>(u) < get<0>(t)) && ttail < utail), where rtail for some tuple r is a tuple containing all but the first element of r. For any two zero-length tuples e and f, e < f returns false.

to:

Returns: The result of a lexicographical comparison between t and u. For any two zero-length tuples e and f, e < f returns false. Otherwise, the result is defined as: cmp( get<0>(t), get<0>(u)) || (!cmp(get<0>(u), get<0>(t)) && ttail < utail), where rtail for some tuple r is a tuple containing all but the first element of r, and cmp(x,y) is an unspecified function template defined as follows.

Where T is the type of x and U is the type of y:

if T and U are pointer types and T is convertible to U, returns less<U>()(x,y)

otherwise, if T and U are pointer types, returns less<T>()(x,y)

otherwise, returns (bool)(x < y)

[ Berlin: This issue is much bigger than just tuple (pair, containers, algorithms). Dietmar will survey and work up proposed wording. ]

Rationale:

Recommend NAD. This will be fixed with the next revision of concepts.


536. Container iterator constructor and explicit convertibility

Section: 23.1 [container.requirements] Status: Dup Submitter: Joaquín M López Muñoz Date: 2005-12-17

View other active issues in [container.requirements].

View all other issues in [container.requirements].

View all issues with Dup status.

Duplicate of: 589

Discussion:

The iterator constructor X(i,j) for containers as defined in 23.1.1 and 23.2.2 does only require that i and j be input iterators but nothing is said about their associated value_type. There are three sensible options:

  1. iterator's value_type is exactly X::value_type (modulo cv).
  2. iterator's value_type is *implicitly* convertible to X::value_type.
  3. iterator's value_type is *explicitly* convertible to X::value_type.

The issue has practical implications, and stdlib vendors have taken divergent approaches to it: Dinkumware follows 2, libstdc++ follows 3.

The same problem applies to the definition of insert(p,i,j) for sequences and insert(i,j) for associative contianers, as well as assign.

[ The following added by Howard and the example code was originally written by Dietmar. ]

Valid code below?

#include <vector> 
#include <iterator> 
#include <iostream> 

struct foo 
{ 
    explicit foo(int) {} 
}; 

int main() 
{ 
    std::vector<int> v_int; 
    std::vector<foo> v_foo1(v_int.begin(), v_int.end()); 
    std::vector<foo> v_foo2((std::istream_iterator<int>(std::cin)), 
                             std::istream_iterator<int>()); 
} 

[ Berlin: Some support, not universal, for respecting the explicit qualifier. ]

Proposed resolution:


544. minor NULL problems in C.2

Section: C.2 [diff.library] Status: NAD Editorial Submitter: Martin Sebor Date: 2005-11-25

View all issues with NAD Editorial status.

Discussion:

According to C.2.2.3, p1, "the macro NULL, defined in any of <clocale>, <cstddef>, <cstdio>, <cstdlib>, <cstring>, <ctime>, or <cwchar>." This is consistent with the C standard.

However, Table 95 in C.2 fails to mention <clocale> and <cstdlib>.

In addition, C.2, p2 claims that "The C++ Standard library provides 54 standard macros from the C library, as shown in Table 95." While table 95 does have 54 entries, since a couple of them (including the NULL macro) are listed more than once, the actual number of macros defined by the C++ Standard Library may not be 54.

Proposed resolution:

I propose we add <clocale> and <cstdlib> to Table 96 and remove the number of macros from C.2, p2 and reword the sentence as follows:

The C++ Standard library provides 54 standard macros from defines a number macros corresponding to those defined by the C Standard library, as shown in Table 96.

[ Portland: Resolution is considered editorial. It will be incorporated into the WD. ]


547. division should be floating-point, not integer

Section: 26.4 [rand], TR1 5.1 [tr.rand] Status: NAD Submitter: Matt Austern Date: 2006-01-10

View all other issues in [rand].

View all issues with NAD status.

Discussion:

Paragraph 10 describes how a variate generator uses numbers produced by an engine to pass to a generator. The sentence that concerns me is: "Otherwise, if the value for engine_value_type::result_type is true and the value for Distribution::input_type is false [i.e. if the engine produces integers and the engine wants floating-point values], then the numbers in s_eng are divided by engine().max() - engine().min() + 1 to obtain the numbers in s_e." Since the engine is producing integers, both the numerator and the denominator are integers and we'll be doing integer division, which I don't think is what we want. Shouldn't we be performing a conversion to a floating-point type first?

Proposed resolution:

Rationale:

Recommend NAD as the affected section is now gone and so the issue is moot. N2111.


548. May random_device block?

Section: 26.4.6 [rand.device], TR1 5.1.6 [tr.rand.device] Status: NAD Submitter: Matt Austern Date: 2006-01-10

View all issues with NAD status.

Discussion:

Class random_device "produces non-deterministic random numbers", using some external source of entropy. In most real-world systems, the amount of available entropy is limited. Suppose that entropy has been exhausted. What is an implementation permitted to do? In particular, is it permitted to block indefinitely until more random bits are available, or is the implementation required to detect failure immediately? This is not an academic question. On Linux a straightforward implementation would read from /dev/random, and "When the entropy pool is empty, reads to /dev/random will block until additional environmental noise is gathered." Programmers need to know whether random_device is permitted to (or possibly even required to?) behave the same way.

[ Berlin: Walter: N1932 considers this NAD. Does the standard specify whether std::cin may block? ]

See N2391 and N2423 for some further discussion.

Proposed resolution:

Adopt the proposed resolution in N2423 (NAD).


549. Undefined variable in binomial_distribution

Section: 26.4.8 [rand.dist], TR1 5.1.7.5 [tr.rand.dist.bin] Status: NAD Editorial Submitter: Matt Austern Date: 2006-01-10

View all other issues in [rand.dist].

View all issues with NAD Editorial status.

Discussion:

Paragraph 1 says that "A binomial distributon random distribution produces integer values i>0 with p(i) = (n choose i) * p*i * (1-p)^(t-i), where t and p are the parameters of the distribution. OK, that tells us what t, p, and i are. What's n?

Proposed resolution:

Berlin: Typo: "n" replaced by "t" in N1932: see 26.3.7.2.2/1.

[ Portland: Subsumed by N2111. ]


553. very minor editorial change intptr_t / uintptr_t

Section: 18.3.1 [cstdint.syn], TR1 8.22.1 [tr.c99.cstdint.syn] Status: NAD Editorial Submitter: Paolo Carlini Date: 2006-01-30

View all issues with NAD Editorial status.

Discussion:

In the synopsis, some types are identified as optional: int8_t, int16_t, and so on, consistently with C99, indeed.

On the other hand, intptr_t and uintptr_t, are not marked as such and probably should, consistently with C99, 7.18.1.4.

Proposed resolution:

Change 18.3.1 [cstdint.syn]:

...
typedef signed integer type intptr_t;    // optional
...
typedef unsigned integer type uintptr_t;    // optional
...

Rationale:

Recommend NAD and fix as editorial with the proposed resolution.

554. Problem with lwg DR 184 numeric_limits<bool>

Section: 18.2.1.5 [numeric.special] Status: NAD Submitter: Howard Hinnant Date: 2006-01-29

View all other issues in [numeric.special].

View all issues with NAD status.

Discussion:

I believe we have a bug in the resolution of: lwg 184 (WP status).

The resolution spells out each member of numeric_limits<bool>. The part I'm having a little trouble with is:

static const bool traps = false;

Should this not be implementation defined? Given:

int main()
{
     bool b1 = true;
     bool b2 = false;
     bool b3 = b1/b2;
}

If this causes a trap, shouldn't numeric_limits<bool>::traps be true?

Proposed resolution:

Change 18.2.1.5p3:

-3- The specialization for bool shall be provided as follows:

namespace std { 
   template <> class numeric_limits<bool> {
      ...
      static const bool traps = false implementation-defined;
      ...
   };
}

[ Redmond: NAD because traps refers to values, not operations. There is no bool value that will trap. ]


555. TR1, 8.21/1: typo

Section: TR1 8.21 [tr.c99.boolh] Status: NAD Editorial Submitter: Paolo Carlini Date: 2006-02-02

View all issues with NAD Editorial status.

Discussion:

This one, if nobody noticed it yet, seems really editorial: s/cstbool/cstdbool/

Proposed resolution:

Change 8.21p1:

-1- The header behaves as if it defines the additional macro defined in <cstdbool> by including the header <cstdbool>.

[ Redmond: Editorial. ]


558. lib.input.iterators Defect

Section: 24.1.1 [input.iterators] Status: NAD Editorial Submitter: David Abrahams Date: 2006-02-09

View all other issues in [input.iterators].

View all issues with NAD Editorial status.

Discussion:

24.1.1 Input iterators [lib.input.iterators]

1 A class or a built-in type X satisfies the requirements of an input iterator for the value type T if the following expressions are valid, where U is the type of any specified member of type T, as shown in Table 73.

There is no capital U used in table 73. There is a lowercase u, but that is clearly not meant to denote a member of type T. Also, there's no description in 24.1.1 of what lowercase a means. IMO the above should have been...Hah, a and b are already covered in 24.1/11, so maybe it should have just been:

Proposed resolution:

Change 24.1.1p1:

-1- A class or a built-in type X satisfies the requirements of an input iterator for the value type T if the following expressions are valid, where U is the type of any specified member of type T, as shown in Table 73.

[ Portland: Editorial. ]


560. User-defined allocators without default constructor

Section: 20.1.2 [allocator.requirements] Status: NAD Submitter: Sergey P. Derevyago Date: 2006-02-17

View other active issues in [allocator.requirements].

View all other issues in [allocator.requirements].

View all issues with NAD status.

Discussion:

1. The essence of the problem.

User-defined allocators without default constructor are not explicitly supported by the standard but they can be supported just like std::vector supports elements without default constructor.

As a result, there exist implementations that work well with such allocators and implementations that don't.

2. The cause of the problem.

1) The standard doesn't explicitly state this intent but it should. In particular, 20.1.5p5 explicitly state the intent w.r.t. the allocator instances that compare non-equal. So it can similarly state the intent w.r.t. the user-defined allocators without default constructor.

2) Some container operations are obviously underspecified. In particular, 21.3.7.1p2 tells:

template<class charT, class traits, class Allocator>
  basic_string<charT,traits,Allocator> operator+(
    const charT* lhs,
    const basic_string<charT,traits,Allocator>& rhs
  );

Returns: basic_string<charT,traits,Allocator>(lhs) + rhs.

That leads to the basic_string<charT,traits,Allocator>(lhs, Allocator()) call. Obviously, the right requirement is:

Returns: basic_string<charT,traits,Allocator>(lhs, rhs.get_allocator()) + rhs.

It seems like a lot of DRs can be submitted on this "Absent call to get_allocator()" topic.

3. Proposed actions.

1) Explicitly state the intent to allow for user-defined allocators without default constructor in 20.1.5 Allocator requirements.

2) Correct all the places, where a correct allocator object is available through the get_allocator() call but default Allocator() gets passed instead.

4. Code sample.

Let's suppose that the following memory pool is available:

class mem_pool {
      // ...
      void* allocate(size_t size);
      void deallocate(void* ptr, size_t size);
};

So the following allocator can be implemented via this pool:

class stl_allocator {
      mem_pool& pool;

 public:
      explicit stl_allocator(mem_pool& mp) : pool(mp) {}
      stl_allocator(const stl_allocator& sa) : pool(sa.pool) {}
      template <class U>
      stl_allocator(const stl_allocator<U>& sa)  : pool(sa.get_pool()) {}
      ~stl_allocator() {}

      pointer allocate(size_type n, std::allocator<void>::const_pointer = 0)
      {
       return (n!=0) ? static_cast<pointer>(pool.allocate(n*sizeof(T))) : 0;
      }

      void deallocate(pointer p, size_type n)
      {
       if (n!=0) pool.deallocate(p, n*sizeof(T));
      }

      // ...
};

Then the following code works well on some implementations and doesn't work on another:

typedef basic_string<char, char_traits<char>, stl_allocator<char> > 
  tl_string;
mem_pool mp;
tl_string s1("abc", stl_allocator<int>(mp));
printf("(%s)\n", ("def"+s1).c_str());

In particular, on some implementations the code can't be compiled without default stl_allocator() constructor.

The obvious way to solve the compile-time problems is to intentionally define a NULL pointer dereferencing default constructor

stl_allocator() : pool(*static_cast<mem_pool*>(0)) {}

in a hope that it will not be called. The problem is that it really gets called by operator+(const char*, const string&) under the current 21.3.7.1p2 wording.

Proposed resolution:

Rationale:

Recommend NAD. operator+() with string already requires the desired semantics of copying the allocator from one of the strings (lhs when there is a choice).


569. Postcondition for basic_ios::clear(iostate) incorrectly stated

Section: 27.4.4.3 [iostate.flags] Status: Dup Submitter: Seungbeom Kim Date: 2006-03-10

View all other issues in [iostate.flags].

View all issues with Dup status.

Duplicate of: 272

Discussion:

Section: 27.4.4.3 [lib.iostate.flags]

Paragraph 4 says:

void clear(iostate state = goodbit);

Postcondition: If rdbuf()!=0 then state == rdstate(); otherwise rdstate()==state|ios_base::badbit.

The postcondition "rdstate()==state|ios_base::badbit" is parsed as "(rdstate()==state)|ios_base::badbit", which is probably what the committee meant.

Rationale:


571. Update C90 references to C99?

Section: 1.2 [intro.refs] Status: NAD Editorial Submitter: Beman Dawes Date: 2006-04-08

View all other issues in [intro.refs].

View all issues with NAD Editorial status.

Discussion:

1.2 Normative references [intro.refs] of the WP currently refers to ISO/IEC 9899:1990, Programming languages - C. Should that be changed to ISO/IEC 9899:1999?

What impact does this have on the library?

Proposed resolution:

In 1.2/1 [intro.refs] of the WP, change:

Rationale:

Recommend NAD, fixed editorially.

572. Oops, we gave 507 WP status

Section: 26.4 [rand], TR1 5.1 [tr.rand] Status: NAD Submitter: Howard Hinnant Date: 2006-04-11

View all other issues in [rand].

View all issues with NAD status.

Discussion:

In Berlin, as a working group, we voted in favor of N1932 which makes issue 507 moot: variate_generator has been eliminated. Then in full committee we voted to give this issue WP status (mistakenly).

Proposed resolution:

Strike the proposed resolution of issue 507.

[ post-Portland: Walter and Howard recommend NAD. The proposed resolution of 507 no longer exists in the current WD. ]

Rationale:

NAD. Will be moot once N2135 is adopted.


583. div() for unsigned integral types

Section: 26.7 [c.math] Status: NAD Submitter: Beman Dawes Date: 2006-06-15

View other active issues in [c.math].

View all other issues in [c.math].

View all issues with NAD status.

Discussion:

There is no div() function for unsigned integer types.

There are several possible resolutions. The simplest one is noted below. Other possibilities include a templated solution.

Proposed resolution:

Add to 26.7 [lib.c.math] paragraph 8:

struct udiv_t div(unsigned, unsigned);
struct uldiv_t div(unsigned long, unsigned long);
struct ulldiv_t div(unsigned long long, unsigned long long);

Rationale:

Toronto: C99 does not have these unsigned versions because the signed version exist just to define the implementation-defined behavior of signed integer division. Unsigned integer division has no implementation-defined behavior and thus does not need this treatment.

584. missing int pow(int,int) functionality

Section: 26.7 [c.math] Status: NAD Submitter: Beman Dawes Date: 2006-06-15

View other active issues in [c.math].

View all other issues in [c.math].

View all issues with NAD status.

Discussion:

There is no pow() function for any integral type.

Proposed resolution:

Add something like:

template< typename T>
T power( T x, int n );
// requires: n >=0

Rationale:

Toronto: We already have double pow(integral, integral) from 26.7 [c.math] p11.

587. iststream ctor missing description

Section: D.7.2.1 [depr.istrstream.cons] Status: NAD Editorial Submitter: Martin Sebor Date: 2006-06-22

View all issues with NAD Editorial status.

Discussion:

The iststream(char*, streamsize) ctor is in the class synopsis in D.7.2 but its signature is missing in the description below (in D.7.2.1).

Proposed resolution:

This seems like a simple editorial issue and the missing signature can be added to the one for const char* in paragraph 2.

[ post Oxford: Noted that it is already fixed in N2284 ]


590. Type traits implementation latitude should be removed for C++0x

Section: 20.4 [meta], TR1 4.9 [tr.meta.req] Status: NAD Editorial Submitter: Beman Dawes Date: 2006-08-10

View all other issues in [meta].

View all issues with NAD Editorial status.

Discussion:

20.4.9 [lib.meta.req], Implementation requirements, provides latitude for type traits implementers that is not needed in C++0x. It includes the wording:

[Note: the latitude granted to implementers in this clause is temporary, and is expected to be removed in future revisions of this document. -- end note]

Note: N2157: Minor Modifications to the type traits Wording also has the intent of removing this wording from the WP.

Proposed resolution:

Remove 20.4.9 [lib.meta.req] in its entirety from the WP.

[ post-Oxford: Recommend NAD Editorial. This resolution is now in the current working draft. ]


591. Misleading "built-in

Section: 18.2.1.2 [numeric.limits.members] Status: NAD Editorial Submitter: whyglinux Date: 2006-08-08

View all other issues in [numeric.limits.members].

View all issues with NAD Editorial status.

Discussion:

18.2.1.2 numeric_limits members [lib.numeric.limits.members] Paragraph 7:

"For built-in integer types, the number of non-sign bits in the representation."

26.1 Numeric type requirements [lib.numeric.requirements] Footnote:

"In other words, value types. These include built-in arithmetic types, pointers, the library class complex, and instantiations of valarray for value types."

Integer types (which are bool, char, wchar_t, and the signed and unsigned integer types) and arithmetic types (which are integer and floating types) are all built-in types and thus there are no non-built-in (that is, user-defined) integer or arithmetic types. Since the redundant "built-in" in the above 2 sentences can mislead that there may be built-in or user-defined integer and arithmetic types (which is not correct), the "built-in" should be removed.

Proposed resolution:

18.2.1.2 numeric_limits members [lib.numeric.limits.members] Paragraph 7:

"For built-in integer types, the number of non-sign bits in the representation."

26.1 Numeric type requirements [lib.numeric.requirements] Footnote:

"In other words, value types. These include built-in arithmetic types, pointers, the library class complex, and instantiations of valarray for value types."

Rationale:

Recommend NAD / Editorial. The proposed resolution is accepted as editorial.


592. Incorrect treatment of rdbuf()->close() return type

Section: 27.8.1.9 [ifstream.members] Status: Pending NAD Editorial Submitter: Christopher Kohlhoff Date: 2006-08-17

View all other issues in [ifstream.members].

View all issues with Pending NAD Editorial status.

Discussion:

I just spotted a minor problem in 27.8.1.7 [lib.ifstream.members] para 4 and also 27.8.1.13 [lib.fstream.members] para 4. In both places it says:

void close();

Effects: Calls rdbuf()->close() and, if that function returns false, ...

However, basic_filebuf::close() (27.8.1.2) returns a pointer to the filebuf on success, null on failure, so I think it is meant to say "if that function returns a null pointer". Oddly, it is correct for basic_ofstream.

Proposed resolution:

Change 27.8.1.9 [ifstream.members], p5:

Effects: Calls rdbuf()->close() and, if that function fails (returns false a null pointer), calls setstate(failbit) (which may throw ios_base::failure (27.4.4.3)).

Change 27.8.1.17 [fstream.members], p5:

Effects: Calls rdbuf()->close() and, if that function fails (returns false a null pointer), calls setstate(failbit) (which may throw ios_base::failure (27.4.4.3)).

[ Kona (2007): Proposed Disposition: NAD, Editorial ]


594. Disadvantages of defining Swappable in terms of CopyConstructible and Assignable

Section: 20.1.1 [utility.arg.requirements] Status: Pending NAD Editorial Submitter: Niels Dekker Date: 2006-11-02

View other active issues in [utility.arg.requirements].

View all other issues in [utility.arg.requirements].

View all issues with Pending NAD Editorial status.

Discussion:

It seems undesirable to define the Swappable requirement in terms of CopyConstructible and Assignable requirements. And likewise, once the MoveConstructible and MoveAssignable requirements (N1860) have made it into the Working Draft, it seems undesirable to define the Swappable requirement in terms of those requirements. Instead, it appears preferable to have the Swappable requirement defined exclusively in terms of the existence of an appropriate swap function.

Section 20.1.4 [lib.swappable] of the current Working Draft (N2009) says:

The Swappable requirement is met by satisfying one or more of the following conditions:

I can think of three disadvantages of this definition:
  1. If a client's type T satisfies the first condition (T is both CopyConstructible and Assignable), the client cannot stop T from satisfying the Swappable requirement without stopping T from satisfying the first condition.

    A client might want to stop T from satisfying the Swappable requirement, because swapping by means of copy construction and assignment might throw an exception, and she might find a throwing swap unacceptable for her type. On the other hand, she might not feel the need to fully implement her own swap function for this type. In this case she would want to be able to simply prevent algorithms that would swap objects of type T from being used, e.g., by declaring a swap function for T, and leaving this function purposely undefined. This would trigger a link error, if an attempt would be made to use such an algorithm for this type. For most standard library implementations, this practice would indeed have the effect of stopping T from satisfying the Swappable requirement.

  2. A client's type T that does not satisfy the first condition can not be made Swappable by providing a specialization of std::swap for T.

    While I'm aware about the fact that people have mixed feelings about providing a specialization of std::swap, it is well-defined to do so. It sounds rather counter-intuitive to say that T is not Swappable, if it has a valid and semantically correct specialization of std::swap. Also in practice, providing such a specialization will have the same effect as satisfying the Swappable requirement.

  3. For a client's type T that satisfies both conditions of the Swappable requirement, it is not specified which of the two conditions prevails. After reading section 20.1.4 [lib.swappable], one might wonder whether objects of T will be swapped by doing copy construction and assignments, or by calling the swap function of T.

    I'm aware that the intention of the Draft is to prefer calling the swap function of T over doing copy construction and assignments. Still in my opinion, it would be better to make this clear in the wording of the definition of Swappable.

I would like to have the Swappable requirement defined in such a way that the following code fragment will correctly swap two objects of a type T, if and only if T is Swappable:

   using std::swap;
   swap(t, u);  // t and u are of type T.

This is also the way Scott Meyers recommends calling a swap function, in Effective C++, Third Edition, item 25.

Most aspects of this issue have been dealt with in a discussion on comp.std.c++ about the Swappable requirement, from 13 September to 4 October 2006, including valuable input by David Abrahams, Pete Becker, Greg Herlihy, Howard Hinnant and others.

Proposed resolution:

Change section 20.1.4 [lib.swappable] as follows:

The Swappable requirement is met by satisfying one or more of the following conditions: the following condition:

Rationale:

Recommend NAD. Concepts, specifically N2082 and N2084, will essentially rewrite this section and provide the desired semantics.


615. Inconsistencies in Section 21.4

Section: 21.5 [c.strings] Status: NAD Editorial Submitter: Bo Persson Date: 2006-12-11

View all other issues in [c.strings].

View all issues with NAD Editorial status.

Discussion:

In the current draft N2134, 21.4/1 says

"Tables 59,228) 60, 61, 62,and 63 229) 230) describe headers <cctype>, <cwctype>, <cstring>, <cwchar>, and <cstdlib> (character conversions), respectively."

Here footnote 229 applies to table 62, not table 63.

Also, footnote 230 lists the new functions in table 63, "atoll, strtoll, strtoull, strtof, and strtold added by TR1". However, strtof is not present in table 63.

Proposed resolution:

Rationale:

Recommend NAD, editorial. Send to Pete.


633. Return clause mentions undefined "type()"

Section: 20.5.15.2.5 [func.wrap.func.targ] Status: NAD Editorial Submitter: Daniel Krügler Date: 2007-02-03

View all issues with NAD Editorial status.

Discussion:

20.5.15.2.5 [func.wrap.func.targ], p4 says:

Returns: If type() == typeid(T), a pointer to the stored function target; otherwise a null pointer.

  1. There exists neither a type, a typedef type, nor member function type() in class template function nor in the global or std namespace.
  2. Assuming that type should have been target_type(), this description would lead to false results, if T = cv void due to returns clause 20.5.15.2.5 [func.wrap.func.targ], p1.

Proposed resolution:

Change 20.5.15.2.5 [func.wrap.func.targ], p4:

Returns: If type() target_type() == typeid(T) && typeid(T) != typeid(void), a pointer to the stored function target; otherwise a null pointer.

[ Pete: Agreed. It's editorial, so I'll fix it. ]


636. 26.5.2.3 valarray::operator[]

Section: 26.5.2.3 [valarray.access] Status: NAD Editorial Submitter: Bo Persson Date: 2007-02-11

View all other issues in [valarray.access].

View all issues with NAD Editorial status.

Discussion:

The signature of the const operator[] has been changed to return a const reference.

The description in paragraph 1 still says that the operator returns by value.

[ Pete recommends editorial fix. ]

Proposed resolution:


637. [c.math]/10 inconsistent return values

Section: 26.7 [c.math] Status: NAD Editorial Submitter: Bo Persson Date: 2007-02-13

View other active issues in [c.math].

View all other issues in [c.math].

View all issues with NAD Editorial status.

Discussion:

26.7 [c.math], paragraph 10 has long lists of added signatures for float and long double functions. All the signatures have float/long double return values, which is inconsistent with some of the double functions they are supposed to overload.

Proposed resolution:

Change 26.7 [c.math], paragraph 10,

float int ilogb(float);
float long lrint(float);
float long lround(float);
float long long llrint(float);
float long long llround(float);

long double int ilogb(long double);
long double long lrint(long double);
long double long lround(long double);
long double long long llrint(long double);
long double long long llround(long double);

639. Still problems with exceptions during streambuf IO

Section: 27.6.1.2.3 [istream::extractors], 27.6.2.6.3 [ostream.inserters] Status: NAD Submitter: Daniel Krügler Date: 2007-02-17

View all other issues in [istream::extractors].

View all issues with NAD status.

Discussion:

There already exist two active DR's for the wording of 27.6.1.2.3 [istream::extractors]/13 from 14882:2003(E), namely 64 and 413.

Even with these proposed corrections, already maintained in N2134, I have the feeling, that the current wording does still not properly handle the "exceptional" situation. The combination of para 14

"[..] Characters are extracted and inserted until any of the following occurs:

[..]

- an exception occurs (in which case the exception is caught)."

and 15

"If the function inserts no characters, it calls setstate(failbit), which may throw ios_base::failure (27.4.4.3). If it inserted no characters because it caught an exception thrown while extracting characters from *this and failbit is on in exceptions() (27.4.4.3), then the caught exception is rethrown."

both in N2134 seems to imply that any exception, which occurs *after* at least one character has been inserted is caught and lost for ever. It seems that even if failbit is on in exceptions() rethrow is not allowed due to the wording "If it inserted no characters because it caught an exception thrown while extracting".

Is this behaviour by design?

I would like to add that its output counterpart in 27.6.2.6.3 [ostream.inserters]/7-9 (also N2134) does not demonstrate such an exception-loss-behaviour. On the other side, I wonder concerning several subtle differences compared to input::

1) Paragraph 8 says at its end:

"- an exception occurs while getting a character from sb."

Note that there is nothing mentioned which would imply that such an exception will be caught compared to 27.6.1.2.3 [istream::extractors]/14.

2) Paragraph 9 says:

"If the function inserts no characters, it calls setstate(failbit) (which may throw ios_base::failure (27.4.4.3)). If an exception was thrown while extracting a character, the function sets failbit in error state, and if failbit is on in exceptions() the caught exception is rethrown."

The sentence starting with "If an exception was thrown" seems to imply that such an exception *should* be caught before.

Proposed resolution:

(a) In 27.6.1.2.3 [istream::extractors]/15 (N2134) change the sentence

If the function inserts no characters, it calls setstate(failbit), which may throw ios_base::failure (27.4.4.3). If it inserted no characters because it caught an exception thrown while extracting characters from *this an exception was thrown while extracting a character from *this, the function sets failbit in error state, and failbit is on in exceptions() (27.4.4.3), then the caught exception is rethrown.

(b) In 27.6.2.6.3 [ostream.inserters]/8 (N2134) change the sentence:

Gets characters from sb and inserts them in *this. Characters are read from sb and inserted until any of the following occurs:

Rationale:

This extractor is described as a formatted input function so the exception behavior is already specified. There is additional behavior described in this section that applies to the case in which failbit is set. This doesn't contradict the usual exception behavior for formatted input functions because that applies to the case in which badbit is set.

641. Editorial fix for 27.6.4 (N2134)

Section: 27.6.4 [ext.manip] Status: NAD Editorial Submitter: Daniel Krügler Date: 2007-02-18

View all other issues in [ext.manip].

View all issues with NAD Editorial status.

Discussion:

The function f in para 4 (27.6.4 [ext.manip]) references an unknown strm in the following line:

mg.get(Iter(str.rdbuf()), Iter(), intl, strm, err, mon);

Proposed resolution:

Change 27.6.4 [ext.manip], p4:

mg.get(Iter(str.rdbuf()), Iter(), intl, strm, err, mon);

[ Oxford: Editorial. ]


642. Invalidated fstream footnotes in N2134

Section: 27.8.1.9 [ifstream.members], 27.8.1.13 [ofstream.members] Status: NAD Editorial Submitter: Daniel Krügler Date: 2007-02-20

View all other issues in [ifstream.members].

View all issues with NAD Editorial status.

Discussion:

The standard wording of N2134 has extended the 14882:2003(E) wording for the ifstream/ofstream/fstream open function to fix a long standing problem, see 409.

Now it's properly written as

"If that function does not return a null pointer calls clear(), otherwise calls setstate(failbit)[..]"

instead of the previous

"If that function returns a null pointer, calls setstate(failbit)[..]

While the old footnotes saying

"A successful open does not change the error state."

where correct and important, they are invalid now for ifstream and ofstream (because clear *does* indeed modify the error state) and should be removed (Interestingly fstream itself never had these, although they where needed for that time).

Proposed resolution:

In 27.8.1.9 [ifstream.members], remove footnote:

334) A successful open does not change the error state.

In 27.8.1.13 [ofstream.members], remove footnote:

335) A successful open does not change the error state.


647. Inconsistent regex_search params

Section: 28.11.3 [re.alg.search] Status: NAD Editorial Submitter: Daniel Krügler Date: 2007-02-26

View all issues with NAD Editorial status.

Discussion:

28.11.3 [re.alg.search]/5 declares

template <class iterator, class charT, class traits>
bool regex_search(iterator first, iterator last,
                  const basic_regex<charT, traits>& e,
                  regex_constants::match_flag_type flags =
                      regex_constants::match_default);

where it's not explained, which iterator category the parameter iterator belongs to. This is inconsistent to the preceding declaration in the synopsis section 28.4 [re.syn], which says:

template <class BidirectionalIterator, class charT, class traits>
bool regex_search(BidirectionalIterator first, BidirectionalIterator last,
                  const basic_regex<charT, traits>& e,
                  regex_constants::match_flag_type flags =
                      regex_constants::match_default);

Proposed resolution:

In 28.11.3 [re.alg.search]/5 replace all three occurences of param "iterator" with "BidirectionalIterator"

template <class iterator BidirectionalIterator, class charT, class traits>
  bool regex_search(iterator BidirectionalIterator first, iterator BidirectionalIterator last, 
                    const basic_regex<charT, traits>& e, 
                    regex_constants::match_flag_type flags = 
                      regex_constants::match_default);

-6- Effects: Behaves "as if" by constructing an object what of type match_results<iterator BidirectionalIterator> and then returning the result of regex_search(first, last, what, e, flags).

Rationale:

Applied to working paper while issue was still in New status.

648. regex_iterator c'tor needs clarification/editorial fix

Section: 28.12.1.1 [re.regiter.cnstr] Status: NAD Editorial Submitter: Daniel Krügler Date: 2007-03-03

View all issues with NAD Editorial status.

Discussion:

In 28.12.1.1 [re.regiter.cnstr]/2 the effects paragraph starts with:

Effects: Initializes begin and end to point to the beginning and the end of the target sequence, sets pregex to &re, sets flags to f,[..]

There are two issues with this description:

  1. The meaning of very first part of this quote is unclear, because there is no target sequence provided, instead there are given two parameters a and b, both of type BidirectionalIterator. The mentioned part does not explain what a and b represent.
  2. There does not exist any parameter f, but instead a parameter m in the constructor declaration, so this is actually an editorial fix.

Proposed resolution:

In 28.12.1.1 [re.regiter.cnstr]/2 change the above quoted part by

Effects: Initializes begin and end to point to the beginning and the end of the target sequence designated by the iterator range [a, b), sets pregex to &re, sets flags to f m, then calls regex_search(begin, end, match, *pregex, flags). If this call returns false the constructor sets *this to the end-of-sequence iterator.


649. Several typos in regex_token_iterator constructors

Section: 28.12.2.1 [re.tokiter.cnstr] Status: NAD Editorial Submitter: Daniel Krügler Date: 2007-03-03

View all other issues in [re.tokiter.cnstr].

View all issues with NAD Editorial status.

Discussion:

In 28.12.2.1 [re.tokiter.cnstr]/1+2 both the constructor declaration and the following text shows some obvious typos:

1) The third constructor form is written as

template <std::size_t N>
  regex_token_iterator(BidirectionalIterator a, BidirectionalIterator b, 
                       const regex_type& re, 
                       const int (&submatches)[R], 
                       regex_constants::match_flag_type m = 
                         regex_constants::match_default);

where the dimensions of submatches are specified by an unknown value R, which should be N.

2) Paragraph 2 of the same section says in its last sentence:

The third constructor initializes the member subs to hold a copy of the sequence of integer values pointed to by the iterator range [&submatches, &submatches + R).

where again R must be replaced by N.

3) Paragraph 3 of the same section says in its first sentence:

Each constructor then sets N to 0, and position to position_iterator(a, b, re, f).

where a non-existing parameter "f" is mentioned, which must be replaced by the parameter "m".

Proposed resolution:

Change 28.12.2.1 [re.tokiter.cnstr]/1:

template <std::size_t N>
  regex_token_iterator(BidirectionalIterator a, BidirectionalIterator b, 
                       const regex_type& re, 
                       const int (&submatches)[R N], 
                       regex_constants::match_flag_type m = 
                         regex_constants::match_default);

Change 28.12.2.1 [re.tokiter.cnstr]/2:

Effects: The first constructor initializes the member subs to hold the single value submatch. The second constructor initializes the member subs to hold a copy of the argument submatches. The third constructor initializes the member subs to hold a copy of the sequence of integer values pointed to by the iterator range [&submatches, &submatches + R N).

Change 28.12.2.1 [re.tokiter.cnstr]/3:

Each constructor then sets N to 0, and position to position_iterator(a, b, re, f m). If position is not an end-of-sequence iterator the constructor sets result to the address of the current match. Otherwise if any of the values stored in subs is equal to -1 the constructor sets *this to a suffix iterator that points to the range [a, b), otherwise the constructor sets *this to an end-of-sequence iterator.


656. Typo in subtract_with_carry_engine declaration

Section: 26.4.2 [rand.synopsis] Status: NAD Editorial Submitter: Daniel Krügler Date: 2007-03-08

View all other issues in [rand.synopsis].

View all issues with NAD Editorial status.

Discussion:

26.4.2 [rand.synopsis] the header <random> synopsis contains an unreasonable closing curly brace inside the subtract_with_carry_engine declaration.

Proposed resolution:

Change the current declaration in 26.4.2 [rand.synopsis]

template <class UIntType, size_t w}, size_t s, size_t r>
class subtract_with_carry_engine;

[ Pete: Recommends editorial. ]


657. unclear requirement about header inclusion

Section: 17.4.2.1 [using.headers] Status: NAD Submitter: Gennaro Prota Date: 2007-03-14

View all issues with NAD status.

Discussion:

17.4.2.1 [using.headers] states:

A translation unit shall include a header only outside of any external declaration or definition, [...]

I see three problems with this requirement:

  1. The C++ standard doesn't define what an "external declaration" or an "external definition" are (incidentally the C99 standard does, and has a sentence very similar to the above regarding header inclusion).

    I think the intent is that the #include directive shall lexically appear outside *any* declaration; instead, when the issue was pointed out on comp.std.c++ at least one poster interpreted "external declaration" as "declaration of an identifier with external linkage". If this were the correct interpretation, then the two inclusions below would be legal:

      // at global scope
      static void f()
      {
    # include <cstddef>
      }
    
      static void g()
      {
    # include <stddef.h>
      }
    

    (note that while the first example is unlikely to compile correctly, the second one may well do)

  2. as the sentence stands, violations will require a diagnostic; is this the intent? It was pointed out on comp.std.c++ (by several posters) that at least one way to ensure a diagnostic exists:

    [If there is an actual file for each header,] one simple way to implement this would be to insert a reserved identifier such as __begin_header at the start of each standard header. This reserved identifier would be ignored for all other purposes, except that, at the appropriate point in phase 7, if it is found inside an external definition, a diagnostic is generated. There's many other similar ways to achieve the same effect.

    --James Kuyper, on comp.std.c++

  3. is the term "header" meant to be limited to standard headers? Clause 17 is all about the library, but still the general question is interesting and affects one of the points in the explicit namespaces proposal (n1691):

    Those seeking to conveniently enable argument-dependent lookups for all operators within an explicit namespace could easily create a header file that does so:

        namespace mymath::
        {
            #include "using_ops.hpp"
        }
    

Proposed resolution:

Rationale:

We believe that the existing language does not cause any real confusion and any new formulation of the rules that we could come up with are unlikely to be better than what's already in the standard.

658. Two unspecified function comparators in [function.objects]

Section: 20.5 [function.objects] Status: NAD Editorial Submitter: Daniel Krügler Date: 2007-03-19

View all other issues in [function.objects].

View all issues with NAD Editorial status.

Discussion:

The header <functional> synopsis in 20.5 [function.objects] contains the following two free comparison operator templates for the function class template

template<class Function1, class Function2>
void operator==(const function<Function1>&, const function<Function2>&);
template<class Function1, class Function2>
void operator!=(const function<Function1>&, const function<Function2>&);

which are nowhere described. I assume that they are relicts before the corresponding two private and undefined member templates in the function template (see 20.5.15.2 [func.wrap.func] and X [func.wrap.func.undef]) have been introduced. The original free function templates should be removed, because using an undefined entity would lead to an ODR violation of the user.

Proposed resolution:

Remove the above mentioned two function templates from the header <functional> synopsis (20.5 [function.objects])

template<class Function1, class Function2>
void operator==(const function<Function1>&, const function<Function2>&);
template<class Function1, class Function2>
void operator!=(const function<Function1>&, const function<Function2>&);

Rationale:

Fixed by N2292 Standard Library Applications for Deleted Functions.

662. Inconsistent handling of incorrectly-placed thousands separators

Section: 22.2.2.1.2 [facet.num.get.virtuals] Status: NAD Submitter: Cosmin Truta Date: 2007-04-05

View other active issues in [facet.num.get.virtuals].

View all other issues in [facet.num.get.virtuals].

View all issues with NAD status.

Discussion:

From Section 22.2.2.1.2 [facet.num.get.virtuals], paragraphs 11 and 12, it is implied that the value read from a stream must be stored even if the placement of thousands separators does not conform to the grouping() specification from the numpunct facet. Since incorrectly-placed thousands separators are flagged as an extraction failure (by the means of failbit), we believe it is better not to store the value. A consistent strategy, in which any kind of extraction failure leaves the input item intact, is conceptually cleaner, is able to avoid corner-case traps, and is also more understandable from the programmer's point of view.

Here is a quote from "The C++ Programming Language (Special Edition)" by B. Stroustrup (Section D.4.2.3, pg. 897):

"If a value of the desired type could not be read, failbit is set in r. [...] An input operator will use r to determine how to set the state of its stream. If no error was encountered, the value read is assigned through v; otherwise, v is left unchanged."

This statement implies that rdstate() alone is sufficient to determine whether an extracted value is to be assigned to the input item val passed to do_get. However, this is in disagreement with the current C++ Standard. The above-mentioned assumption is true in all cases, except when there are mismatches in digit grouping. In the latter case, the parsed value is assigned to val, and, at the same time, err is assigned to ios_base::failbit (essentially "lying" about the success of the operation). Is this intentional? The current behavior raises both consistency and usability concerns.

Although digit grouping is outside the scope of scanf (on which the virtual methods of num_get are based), handling of grouping should be consistent with the overall behavior of scanf. The specification of scanf makes a distinction between input failures and matching failures, and yet both kinds of failures have no effect on the input items passed to scanf. A mismatch in digit grouping logically falls in the category of matching failures, and it would be more consistent, and less surprising to the user, to leave the input item intact whenever a failure is being signaled.

The extraction of bool is another example outside the scope of scanf, and yet consistent, even in the event of a successful extraction of a long but a failed conversion from long to bool.

Inconsistency is further aggravated by the fact that, when failbit is set, subsequent extraction operations are no-ops until failbit is explicitly cleared. Assuming that there is no explicit handling of rdstate() (as in cin>>i>>j) it is counter-intuitive to be able to extract an integer with mismatched digit grouping, but to be unable to extract another, properly-formatted integer that immediately follows.

Moreover, setting failbit, and selectively assigning a value to the input item, raises usability problems. Either the strategy of scanf (when there is no extracted value in case of failure), or the strategy of the strtol family (when there is always an extracted value, and there are well-defined defaults in case of a failure) are easy to understand and easy to use. On the other hand, if failbit alone cannot consistently make a difference between a failed extraction, and a successful but not-quite-correct extraction whose output happens to be the same as the previous value, the programmer must resort to implementation tricks. Consider the following example:

    int i = old_i;
    cin >> i;
    if (cin.fail())
        // can the value of i be trusted?
        // what does it mean if i == old_i?
        // ...

Last but not least, the current behvaior is not only confusing to the casual reader, but it has also been confusing to some book authors. Besides Stroustrup's book, other books (e.g. "Standard C++ IOStreams and Locales" by Langer and Kreft) are describing the same mistaken assumption. Although books are not to be used instead of the standard reference, the readers of these books, as well as the people who are generally familiar to scanf, are even more likely to misinterpret the standard, and expect the input items to remain intact when a failure occurs.

Proposed resolution:

Change 22.2.2.1.2 [facet.num.get.virtuals]:

Stage 3: The result of stage 2 processing can be one of

In the first case, Ddigit grouping is checked. That is, the positions of discarded separators is examined for consistency with use_facet<numpunct<charT> >(loc).grouping(). If they are not consistent then ios_base::failbit is assigned to err. Otherwise, the value that was converted in stage 2 is stored in val and ios_base::goodbit is stored in err.

Rationale:

post-Toronto: Changed from New to NAD at the request of the author. The preferred solution of N2327 makes this resolution obsolete.

663. Complexity Requirements

Section: 17.3.1.3 [structure.specifications] Status: NAD Submitter: Thomas Plum Date: 2007-04-16

View all other issues in [structure.specifications].

View all issues with NAD status.

Discussion:

17.3.1.3 [structure.specifications] para 5 says

-5- Complexity requirements specified in the library  clauses are upper bounds, and implementations that provide better complexity guarantees satisfy the requirements.

The following objection has been raised:

The library clauses suggest general guidelines regarding complexity, but we have been unable to discover any absolute hard-and-fast formulae for these requirements.  Unless or until the Library group standardizes specific hard-and-fast formulae, we regard all the complexity requirements as subject to a  "fudge factor" without any intrinsic upper bound.

[Plum ref  _23213Y31 etc]

Proposed resolution:

Rationale:

Kona (2007): No specific instances of underspecification have been identified, and big-O notation always involves constant factors.

683. regex_token_iterator summary error

Section: 28.12.2 [re.tokiter] Status: Pending NAD Editorial Submitter: Eric Niebler Date: 2007-06-02

View all other issues in [re.tokiter].

View all issues with Pending NAD Editorial status.

Discussion:

28.12.2 [re.tokiter], p3 says:

After it is constructed, the iterator finds and stores a value match_results<BidirectionalIterator> position and sets the internal count N to zero.

Should read:

After it is constructed, the iterator finds and stores a value match_resultsregex_iterator<BidirectionalIterator, charT, traits> position and sets the internal count N to zero.

[ John adds: ]

Yep, looks like a typo/administrative fix to me.

Proposed resolution:


690. abs(long long) should return long long

Section: 26.7 [c.math] Status: NAD Editorial Submitter: Niels Dekker Date: 2007-06-10

View other active issues in [c.math].

View all other issues in [c.math].

View all issues with NAD Editorial status.

Discussion:

Quoting the latest draft (n2135), 26.7 [c.math]:

The added signatures are:

long abs(long); // labs()
long abs(long long); // llabs()

Shouldn't abs(long long) have long long as return type?

Proposed resolution:

Change 26.7 [c.math]:

long long abs(long long); // llabs()

Rationale:

Had already been fixed in the WP by the time the LWG reviewed this.