p0798R6
Monadic operations for std::optional

Published Proposal,

This version:
wg21.tartanllama.xyz/monadic-optional
Author:
Audience:
LWG
Project:
ISO/IEC JTC1/SC22/WG21 14882: Programming Language — C++

Abstract

std::optional is a very important vocabulary type in C++17 and up. Some uses of it can be very verbose and would benefit from operations which allow functional composition. I propose adding map, and_then, and or_else member functions to std::optional to support this monadic style of programming.

1. Changes from r5

2. Changes from r4

3. Changes from r3

4. Changes from r2

5. Changes from r1

6. Changes from r0

7. Motivation

std::optional aims to be a "vocabulary type", i.e. the canonical type to represent some programming concept. As such, std::optional will become widely used to represent an object which may or may not contain a value. Unfortunately, chaining together many computations which may or may not produce a value can be verbose, as empty-checking code will be mixed in with the actual programming logic. As an example, the following code automatically extracts cats from images and makes them more cute:

image get_cute_cat (const image& img) {    return add_rainbow(             make_smaller(               make_eyes_sparkle(                 add_bow_tie(                   crop_to_cat(img))));}

But there’s a problem. What if there’s not a cat in the picture? What if there’s no good place to add a bow tie? What if it has its back turned and we can’t make its eyes sparkle? Some of these operations could fail.

One option would be to throw exceptions on failure. However, there are many code bases which do not use exceptions for a variety of reasons. There’s also the possibility that we’re going to get lots of pictures without cats in them, in which case we’d be using exceptions for control flow. This is commonly seen as bad practice, and has an item warning against it in the C++ Core Guidelines.

Another option would be to make those operations which could fail return a std::optional:

std::optional<image> get_cute_cat (const image& img) {    auto cropped = crop_to_cat(img);    if (!cropped) {      return std::nullopt;    }    auto with_tie = add_bow_tie(*cropped);    if (!with_tie) {      return std::nullopt;    }    auto with_sparkles = make_eyes_sparkle(*with_tie);    if (!with_sparkles) {      return std::nullopt;    }    return add_rainbow(make_smaller(*with_sparkles));}

Our code now has a lot of boilerplate to deal with the case where a step fails. Not only does this increase the noise and cognitive load of the function, but if we forget to put in a check, then suddenly we’re down the hole of undefined behaviour if we *empty_optional.

Another possibility would be to call .value() on the optionals and let the exception be thrown and caught like so:

std::optional<image> get_cute_cat (const image& img) {    try {        auto cropped = crop_to_cat(img);        auto with_tie = add_bow_tie(cropped.value());        auto with_sparkles = make_eyes_sparkle(with_tie.value());        return add_rainbow(make_smaller(with_sparkles.value()));    catch (std::bad_optional_access& e) {        return std::nullopt;    }}

Again, this is using exceptions for control flow. There must be a better way.

8. Proposed solution

This paper proposes adding additional member functions to std::optional in order to push the handling of empty states off to the side. The proposed additions are map, and_then and or_else. Using these new functions, the code above becomes this:

std::optional<image> get_cute_cat (const image& img) {    return crop_to_cat(img)           .and_then(add_bow_tie)           .and_then(make_eyes_sparkle)           .map(make_smaller)           .map(add_rainbow);}

We’ve successfully got rid of all the manual checking. We’ve even improved on the clarity of the non-optional example, which needed to either be read inside-out or split into multiple declarations.

This is common in other programming languages. Here is a list of programming languages which have a optional-like type with a monadic interface or some similar syntactic sugar:

Here is a list of programming languages which have a optional-like type without a monadic interface or syntactic sugar:

All that we need now is an understanding of what transform and and_then do and how to use them.

8.1. transform

transform is used to apply a function to change the value (and possibly the type) stored in an optional. It applies a function to the value stored in the optional and returns the result wrapped in an optional. If there is no stored value, then it returns an empty optional.

For example, if you have a std::optional<std::string> and you want to get a std::optional<std::size_t> giving the size of the string if one is available, you could write this:

auto s = opt_string.transform([](auto&& s) { return s.size(); });

which is somewhat equivalent to:

if (opt_string) {    std::size_t s = opt_string->size();}

transform has one overload (expositional):

template <class T>class optional {    template <class Return>    std::optional<Return> transform (function<Return(T)> func);};

It takes any invocable. If the optional does not have a value stored, then an empty optional is returned. Otherwise, the given function is called with the stored value as an argument, and the return value is returned inside an optional.

If you come from a functional programming or category theory background, you may recognise this as a functor map.

8.2. and_then

and_then is used to compose functions which return std::optional.

For example, say you have std::optional<std::string> and a function like std::stoi which returns a std::optional<int> instead of throwing on failure. Rather than manually checking the optional string before calling, you could do this:

std::optional<int> i = opt_string.and_then(stoi);

Which is roughly equivalent to:

if (opt_string) {   std::optional<int> i = stoi(*opt_string);}

and_then has one overload which looks like this (again, expositional):

template <class T>class optional {    template <class Return>    std::optional<Return> and_then (function<std::optional<Return>(T)> func);};

It takes any callable object which returns a std::optional. If the optional does not have a value stored, then an empty optional is returned. Otherwise, the given function is called with the stored value as an argument, and the return value is returned.

Again, those from an FP background will recognise this as a monadic bind.

8.3. or_else

or_else returns the optional if it has a value, otherwise it calls a given function. This allows you do things like logging or throwing exceptions in monadic contexts:

get_opt().or_else([]{std::cout << "get_opt failed";});get_opt().or_else([]{throw std::runtime_error("get_opt_failed")});

Users can easily abstract these patterns if they are common:

void opt_log(std::string_view msg) {     return [=] { std::cout << msg; };}void opt_throw(std::string_view msg) {     return [=] { throw std::runtime_error(msg); };}get_opt().or_else(opt_log("get_opt failed"));get_opt().or_else(opt_throw("get_opt failed"));

It has one overload (expositional):

template <class T>class optional {    template <class Return>    std::optional<T> or_else (function<Return()> func);};

func will be called if *this is empty. Return will either be convertible to std::optional<T>, or void. In the former case, the return of func will be returned from or_else; in the second case std::nullopt will be returned.

8.4. Chaining

With these two functions, doing a lot of chaining of functions which could fail becomes very clean:

std::optional<int> foo() {    return      a().and_then(b)         .and_then(c)         .and_then(d)         .and_then(e);}

Taking the example of stoi from earlier, we could carry out mathematical operations on the result by just adding map calls:

std::optional<int> i = opt_string                       .and_then(stoi)                       .transform([](auto i) { return i * 2; });

We can also intersperse our chain with error checking code:

std::optional<int> i = opt_string                       .and_then(stoi)                       .or_else(opt_throw("stoi failed"))                       .transform([](auto i) { return i * 2; });

9. How other languages handle this

std::optional is known as Maybe in Haskell and it provides much the same functionality. transform is in Functor and named fmap, and and_then is in Monad and named >>= (bind).

Rust has an Option class, and uses the same names as are proposed in this paper. It also provides many additional member functions like or, and, map_or_else.

10. Considerations

10.1. Disallowing function pointers

In San Diego, a straw poll on disallowing passing function pointers to the functions proposed was made with the following results:

|SF|F|N|A|SA||3 |6|1|0|1 | 

This poll was carried out with the understanding that some parts of Ranges (in particular ranges::transform_view) disallow function pointers. However, this is not the case. From p0896r2:

template<InputRange R, CopyConstructible F>requires View<R> && is_object_v<F&&> Invocable<F&,iter_reference_t<iterator_t<R>>>class transform_view;

I imagine the confusion comes from is_object_v<F&&>, but function pointers are object types. From n4460 (C++17):

An object type is a (possibly cv-qualified) type that is not a function type, not a reference type, and not cv void.

As far as I am aware, if we disallowed passing function pointers here then this would be the only place in the standard library which does so. Alongside the issue of consistency, ease-of-use is damaged. For example:

int this_will_never_be_overloaded(double);my_optional_double.transform(this_will_never_be_overloaded); //not allowed//have to write this insteadmy_optional_double.transform([](double d){ return this_will_never_be_overloaded(d); });//or use some sort of macromy_optional_double.transform(LIFT(this_will_never_be_overloaded));

For library extensions which are supposed to aid ergonomics and simplify code, this goes in the opposite direction.

The benefit of disallowing function pointers is avoidance of build breakages when a previously non-overloaded function is overloaded. This is not a new issue: it applies to practically every single higher order function in the C++ standard library, including functions in <algorithm>, <numeric>, and ranges. There are papers in flight to address this issue in other ways (such as p1170), but in the meantime it remains a problem. While I see the desire to avoid this issue, I think the cost of consistency and ease-of-use far outweighs the benefits. As such, this paper still allows function pointers to be passed.

10.2. Mapping functions returning void

There are three main options for handling void-returning functions for transform. The simplest is to disallow it (this is what boost::optional does). One is to return std::optional<std::monostate> (or some other unit type) instead of std::optional<void> (this is what tl::optional does). Another option is to add a std::optional<void> specialization. This functionality can be desirable since it allows chaining functions which are used purely for side effects.

get_optional()                // returns std::optional<T>  .transform(print_value)     // returns std::optional<std::monostate>  .transform(notify_success); // Is only called when get_optional returned a value

This proposal disallows mapping void-returning functions.

10.3. More functions

Rust’s Option class provides a lot more than map, and_then and or_else. If the idea to add these is received favourably, then we can think about what other additions we may want to make.

10.4. transform only

It would be possible to merge all of these into a single function which handles all use cases. However, I think this would make the function more difficult to teach and understand.

10.5. Operator overloading

We could provide operator overloads with the same semantics as the functions. For example, | could mean transform, >= and_then, and & or_else. Rewriting the original example gives this:

// originalcrop_to_cat(img)  .and_then(add_bow_tie)  .and_then(make_eyes_sparkle)  .transform(make_smaller)  .transform(add_rainbow);// rewrittencrop_to_cat(img)   >= add_bow_tie   >= make_eyes_sparkle    | make_smaller    | add_rainbow;

Another option would be >> for and_then.

10.6. Applicative Functors

transform could be overloaded to accept callables wrapped in std::optionals. This fits the applicative functor concept. It would look like this:

template <class Return>std::optional<Return> map (std::optional<function<Return(T)>> func);

This would give functional programmers the set of operations which they may expect from a monadic-style interface. However, I couldn’t think of many use-cases of this in C++. If some are found then we could add the extra overload.

10.7. SFINAE-friendliness

transform and and_then are specified to return auto. This makes them not SFINAE-friendly. This is required because of the issue described in p0826: if the callable which is passed in has an SFINAE-unfriendly call operator template, it could produce a hard error when instantiated in the const and non-const overloads of transform and and_then during overload resolution. For example, if transform was SFINAE-friendly, the following code would result in a hard error:

struct foo {  void non_const() {}};std::optional<foo> f = foo{};auto l = [](auto &&x) { x.non_const(); };//error: passing 'const foo' as 'this' argument discards qualifiersf.transform(l); 

If p0847 is accepted and this proposal is rebased on top of it, then this would no longer be an issue, and transform and and_then could be made SFINAE-friendly.

11. Pitfalls

Users may want to write code like this:

std::optional<int> foo(int i) {    return      a().and_then(b)         .and_then(get_func(i));}

The problem with this is get_func will be called regardless of whether b returns an empty std::optional or not. If it has side effects, then this may not be what the user wants.

One possible solution to this would be to add an additional function, bind_with which will take a callable which provides what you want to bind to:

std::optional<int> foo(int i) {    return      a().and_then(b)         .bind_with([i](){return get_func(i)});}

11.1. Other solutions

There is a proposal for adding a general monadic interface to C++. Unfortunately doing the kind of composition described above would be very verbose with the current proposal without some kind of Haskell-style do notation. The code for my first solution above would look like this:

std::optional<int> get_cute_cat(const image& img) {    return      functor::map(        functor::map(          monad::bind(            monad::bind(crop_to_cat(img),              add_bow_tie),            make_eyes_sparkle),         make_smaller),      add_rainbow);}

My proposal is not necessarily an alternative to this proposal; compatibility between the two could be ensured and the generic proposal could use my proposal as part of its implementation. This would allow users to use both the generic syntax for flexibility and extensibility, and the member-function syntax for brevity and clarity.

If do notation or unified call syntax is accepted, then my proposal may not be necessary, as use of the generic monadic functionality would allow the same or similarly concise syntax.

Another option would be to use a ranges-style interface for the general monadic interface:

std::optional<int> get_cute_cat(const image& img) {    return crop_to_cat(img)         | monad::bind(add_bow_tie)         | monad::bind(make_eyes_sparkle)         | functor::map(make_smaller)         | functor::map(add_rainbow);}

11.2. Interaction with other proposals

p0847 would ease implementation and solve the issue of SFINAE-friendliness for transform and and_then.

There is a proposal for std::expected which would benefit from many of these same ideas. If the idea to add monadic interfaces to standard library classes on a case-by-case basis is chosen rather than a unified non-member function interface, then compatibility between this proposal and the std::expected one should be maintained.

Mapping functions which return void can be supported, but is a pain to implement since void is not a regular type. If the Regular Void proposal was accepted, implementation would be simpler and the results of the operation would conform to users' expectations better.

Any proposals which make lambdas or overload sets easier to write and pass around will greatly improve this proposal. In particular, proposals for lift operators and abbreviated lambdas would ensure that the clean style is preserved in the face of many anonymous functions and overloads.

12. Implementation experience

This proposal has been implemented here.


13. Proposed Wording

13.1. Add feature test macro to Table 36 in [support.limits.general]

Macro name Value Header(s)
... ... ...
_­_­cpp_­lib_­memory_­resource 201603L <memory_resource>
__cpp_lib_monadic_optional 201907L <optional>
__cpp_lib_node_extract 201606L <map> <set> <unordered_map> <unordered_set>
... ... ...

13.2. Add declarations for the monadic operations to the synopsis of class template optional in [optional.optional]

//...template<class U> constexpr T value_or(U&&) const&;template<class U> constexpr T value_or(U&&) &&;// [optional.monadic], monadic operationstemplate <class F> constexpr auto and_then(F&& f) &;template <class F> constexpr auto and_then(F&& f) &&;template <class F> constexpr auto and_then(F&& f) const&;template <class F> constexpr auto and_then(F&& f) const&&;template <class F> constexpr auto transform(F&& f) &;template <class F> constexpr auto transform(F&& f) &&;template <class F> constexpr auto transform(F&& f) const&;template <class F> constexpr auto transform(F&& f) const&&;template <class F> constexpr optional or_else(F&& f) &&;template <class F> constexpr optional or_else(F&& f) const&;// [optional.mod], modifiersvoid reset() noexcept;//...

13.3. Add new subclause "Monadic operations [optional.monadic]" between [optional.observe] and [optional.mod]

template <class F> constexpr auto and_then(F&& f) &;template <class F> constexpr auto and_then(F&& f) const&;

Let U be invoke_result_t<F, decltype(value())>.

Constraints: F models invocable<decltype(value())>.

Mandates: remove_cvref_t<U> is a specialization of optional.

Effects: Equivalent to:

if (*this) { return invoke(std::forward<F>(f), value());}else { return remove_cvref_t<U>();}
template <class F> constexpr auto and_then(F&& f) &&;template <class F> constexpr auto and_then(F&& f) const&&;

Let U be invoke_result_t<F, decltype(std::move(value()))>.

Constraints: F models invocable<decltype(std::move(value()))>.

Mandates: remove_cvref_t<U> is a specialization of optional.

Effects: Equivalent to:

if (*this) { return invoke(std::forward<F>(f), std::move(value()));}else { return remove_cvref_t<U>();}
template <class F> constexpr auto transform(F&& f) &;template <class F> constexpr auto transform(F&& f) const&;

Let U be invoke_result_t<F, decltype(value())>.

Constraints: F models invocable<decltype(value())>.

Effects: Equivalent to:

if (*this) { return optional<U>(in_place, invoke(std::forward<F>(f), value()));}else { return optional<U>();}
template <class F> constexpr auto transform(F&& f) &&;template <class F> constexpr auto transform(F&& f) const&&;

Let U be invoke_result_t<F, decltype(std::move(value()))>.

Constraints: F models invocable<decltype(std::move(value()))>.

Effects: Equivalent to:

if (*this) { return optional<U>(in_place, invoke(std::forward<F>(f), std::move(value())));}else { return optional<U>();}
template <class F> constexpr optional or_else(F&& f) const&;

Constraints: F models invocable<>.

Expects: T meets the Cpp17CopyConstructible requirements (Table 27).

Effects: Equivalent to:

if (*this) { return *this;}else { return std::forward<F>(f)();}
template <class F> constexpr optional or_else(F&& f) &&;

Constraints: F models invocable<>.

Expects: T meets the Cpp17CopyConstructible requirements (Table 27).

Effects: Equivalent to:

if (*this) { return std::move(*this);}else { return std::forward<F>(f)();}

13.4. Acknowledgements

Thank you to Michael Wong and Chris Di Bella for representing this paper to the committee. Thanks to Kenneth Benzie, Vittorio Romeo, Jonathan Müller, Adi Shavit, Nicol Bolas, Vicente Escribá, Barry Revzin, Tim Song, and especially Casey Carter for review and suggestions.