Doc. no. N1908=05-0168
Date: 2005-10-23
Project: Programming Language C++
Reply to: Howard Hinnant <>

C++ Standard Library Active Issues List (Revision R39)

Reference ISO/IEC IS 14882:1998(E)

Also see:

The purpose of this document is to record the status of issues which have come before the Library Working Group (LWG) of the ANSI (J16) and ISO (WG21) C++ Standards Committee. Issues represent potential defects in the ISO/IEC IS 14882:1998(E) document. Issues are not to be used to request new features.

This document contains only library issues which are actively being considered by the Library Working Group. That is, issues which have a status of New, Open, Ready, and Review. See Library Defect Reports List for issues considered defects and Library Closed Issues List for issues considered closed.

The issues in these lists are not necessarily formal ISO Defect Reports (DR's). While some issues will eventually be elevated to official Defect Report status, other issues will be disposed of in other ways. See Issue Status.

This document is in an experimental format designed for both viewing via a world-wide web browser and hard-copy printing. It is available as an HTML file for browsing or PDF file for printing.

Prior to Revision 14, library issues lists existed in two slightly different versions; a Committee Version and a Public Version. Beginning with Revision 14 the two versions were combined into a single version.

This document includes [bracketed italicized notes] as a reminder to the LWG of current progress on issues. Such notes are strictly unofficial and should be read with caution as they may be incomplete or incorrect. Be aware that LWG support for a particular resolution can quickly change if new viewpoints or killer examples are presented in subsequent discussions.

For the most current official version of this document see Requests for further information about this document should include the document number above, reference ISO/IEC 14882:1998(E), and be submitted to Information Technology Industry Council (ITI), 1250 Eye Street NW, Washington, DC 20005.

Public information as to how to obtain a copy of the C++ Standard, join the standards committee, submit an issue, or comment on an issue can be found in the comp.std.c++ FAQ. Public discussion of C++ Standard related issues occurs on news:comp.std.c++.

For committee members, files available on the committee's private web site include the HTML version of the Standard itself. HTML hyperlinks from this issues list to those files will only work for committee members who have downloaded them into the same disk directory as the issues list files.

Revision History

Issue Status

New - The issue has not yet been reviewed by the LWG. Any Proposed Resolution is purely a suggestion from the issue submitter, and should not be construed as the view of LWG.

Open - The LWG has discussed the issue but is not yet ready to move the issue forward. There are several possible reasons for open status:

A Proposed Resolution for an open issue is still not be construed as the view of LWG. Comments on the current state of discussions are often given at the end of open issues in an italic font. Such comments are for information only and should not be given undue importance.

Dup - The LWG has reached consensus that the issue is a duplicate of another issue, and will not be further dealt with. A Rationale identifies the duplicated issue's issue number.

NAD - The LWG has reached consensus that the issue is not a defect in the Standard, and the issue is ready to forward to the full committee as a proposed record of response. A Rationale discusses the LWG's reasoning.

Review - Exact wording of a Proposed Resolution is now available for review on an issue for which the LWG previously reached informal consensus.

Ready - The LWG has reached consensus that the issue is a defect in the Standard, the Proposed Resolution is correct, and the issue is ready to forward to the full committee for further action as a Defect Report (DR).

DR - (Defect Report) - The full J16 committee has voted to forward the issue to the Project Editor to be processed as a Potential Defect Report. The Project Editor reviews the issue, and then forwards it to the WG21 Convenor, who returns it to the full committee for final disposition. This issues list accords the status of DR to all these Defect Reports regardless of where they are in that process.

TC - (Technical Corrigenda) - The full WG21 committee has voted to accept the Defect Report's Proposed Resolution as a Technical Corrigenda. Action on this issue is thus complete and no further action is possible under ISO rules.

WP - (Working Paper) - The proposed resolution has not been accepted as a Technical Corrigendum, but the full WG21 committee has voted to apply the Defect Report's Proposed Resolution to the working paper.

RR - (Record of Response) - The full WG21 committee has determined that this issue is not a defect in the Standard. Action on this issue is thus complete and no further action is possible under ISO rules.

Future - In addition to the regular status, the LWG believes that this issue should be revisited at the next revision of the standard. It is usually paired with NAD.

Issues are always given the status of New when they first appear on the issues list. They may progress to Open or Review while the LWG is actively working on them. When the LWG has reached consensus on the disposition of an issue, the status will then change to Dup, NAD, or Ready as appropriate. Once the full J16 committee votes to forward Ready issues to the Project Editor, they are given the status of Defect Report ( DR). These in turn may become the basis for Technical Corrigenda (TC), or are closed without action other than a Record of Response (RR ). The intent of this LWG process is that only issues which are truly defects in the Standard move to the formal ISO DR status.

Active Issues

23. Num_get overflow result

Section: [lib.facet.num.get.virtuals]  Status: Open  Submitter: Nathan Myers  Date: 6 Aug 1998

The current description of numeric input does not account for the possibility of overflow. This is an implicit result of changing the description to rely on the definition of scanf() (which fails to report overflow), and conflicts with the documented behavior of traditional and current implementations.

Users expect, when reading a character sequence that results in a value unrepresentable in the specified type, to have an error reported. The standard as written does not permit this.

Further comments from Dietmar:

I don't feel comfortable with the proposed resolution to issue 23: It kind of simplifies the issue to much. Here is what is going on:

Currently, the behavior of numeric overflow is rather counter intuitive and hard to trace, so I will describe it briefly:

Further discussion from Redmond:

The basic problem is that we've defined our behavior, including our error-reporting behavior, in terms of C90. However, C90's method of reporting overflow in scanf is not technically an "input error". The strto_* functions are more precise.

There was general consensus that failbit should be set upon overflow. We considered three options based on this:

  1. Set failbit upon conversion error (including overflow), and don't store any value.
  2. Set failbit upon conversion error, and also set errno to indicated the precise nature of the error.
  3. Set failbit upon conversion error. If the error was due to overflow, store +-numeric_limits<T>::max() as an overflow indication.

Straw poll: (1) 5; (2) 0; (3) 8.

Proposed resolution:

Discussed at Lillehammer. General outline of what we want the solution to look like: we want to say that overflow is an error, and provide a way to distinguish overflow from other kinds of errors. Choose candidate field the same way scanf does, but don't describe the rest of the process in terms of format. If a finite input field is too large (positive or negative) to be represented as a finite value, then set failbit and assign the nearest representable value. Bill will provide wording.

96. Vector<bool> is not a container

Section: 23.2.5 [lib.vector.bool]  Status: Open  Submitter: AFNOR  Date: 7 Oct 1998

vector<bool> is not a container as its reference and pointer types are not references and pointers.

Also it forces everyone to have a space optimization instead of a speed one.

See also: 99-0008 == N1185 Vector<bool> is Nonconforming, Forces Optimization Choice.

Proposed resolution:

[In Santa Cruz the LWG felt that this was Not A Defect.]

[In Dublin many present felt that failure to meet Container requirements was a defect. There was disagreement as to whether or not the optimization requirements constituted a defect.]

[The LWG looked at the following resolutions in some detail:
     * Not A Defect.
     * Add a note explaining that vector<bool> does not meet Container requirements.
     * Remove vector<bool>.
     * Add a new category of container requirements which vector<bool> would meet.
     * Rename vector<bool>.

No alternative had strong, wide-spread, support and every alternative had at least one "over my dead body" response.

There was also mention of a transition scheme something like (1) add vector_bool and deprecate vector<bool> in the next standard. (2) Remove vector<bool> in the following standard.]

[Modifying container requirements to permit returning proxies (thus allowing container requirements conforming vector<bool>) was also discussed.]

[It was also noted that there is a partial but ugly workaround in that vector<bool> may be further specialized with a customer allocator.]

[Kona: Herb Sutter presented his paper J16/99-0035==WG21/N1211, vector<bool>: More Problems, Better Solutions. Much discussion of a two step approach: a) deprecate, b) provide replacement under a new name. LWG straw vote on that: 1-favor, 11-could live with, 2-over my dead body. This resolution was mentioned in the LWG report to the full committee, where several additional committee members indicated over-my-dead-body positions.]

Discussed at Lillehammer. General agreement that we should deprecate vector<bool> and introduce this functionality under a different name, e.g. bit_vector. This might make it possible to remove the vector<bool> specialization in the standard that comes after C++0x. There was also a suggestion that in C++0x we could additional say that it's implementation defined whether vector<bool> refers to the specialization or to the primary template, but there wasn't general agreement that this was a good idea.

We need a paper for the new bit_vector class.

201. Numeric limits terminology wrong

Section: 18.2.1 [lib.limits]  Status: Open  Submitter: Stephen Cleary  Date: 21 Dec 1999

In some places in this section, the terms "fundamental types" and "scalar types" are used when the term "arithmetic types" is intended. The current usage is incorrect because void is a fundamental type and pointers are scalar types, neither of which should have specializations of numeric_limits.

Proposed resolution:

[Lillehammer: it remains true that numeric_limits is using imprecise language. However, none of the proposals for changed wording are clearer. A redesign of numeric_limits is needed, but this is more a task than an open issue.]

233. Insertion hints in associative containers

Section: 23.1.2 [lib.associative.reqmts]  Status: Open  Submitter: Andrew Koenig  Date: 30 Apr 2000

If mm is a multimap and p is an iterator into the multimap, then mm.insert(p, x) inserts x into mm with p as a hint as to where it should go. Table 69 claims that the execution time is amortized constant if the insert winds up taking place adjacent to p, but does not say when, if ever, this is guaranteed to happen. All it says it that p is a hint as to where to insert.

The question is whether there is any guarantee about the relationship between p and the insertion point, and, if so, what it is.

I believe the present state is that there is no guarantee: The user can supply p, and the implementation is allowed to disregard it entirely.

Additional comments from Nathan:
The vote [in Redmond] was on whether to elaborately specify the use of the hint, or to require behavior only if the value could be inserted adjacent to the hint. I would like to ensure that we have a chance to vote for a deterministic treatment: "before, if possible, otherwise after, otherwise anywhere appropriate", as an alternative to the proposed "before or after, if possible, otherwise [...]".

Proposed resolution:

In table 69 "Associative Container Requirements" in 23.1.2 [lib.associative.reqmts], in the row for a.insert(p, t), change

iterator p is a hint pointing to where the insert should start to search.


insertion adjacent to iterator p is preferred if more than one insertion point is valid.

and change

logarithmic in general, but amortized constant if t is inserted right after p.


logarithmic in general, but amortized constant if t is inserted adjacent to iterator p.

[Toronto: there was general agreement that this is a real defect: when inserting an element x into a multiset that already contains several copies of x, there is no way to know whether the hint will be used. The proposed resolution was that the new element should always be inserted as close to the hint as possible. So, for example, if there is a subsequence of equivalent values, then providing a.begin() as the hint means that the new element should be inserted before the subsequence even if a.begin() is far away. JC van Winkel supplied precise wording for this proposed resolution, and also for an alternative resolution in which hints are only used when they are adjacent to the insertion point.]

[Copenhagen: the LWG agreed to the original proposed resolution, in which an insertion hint would be used even when it is far from the insertion point. This was contingent on seeing a reference implementation showing that it is possible to implement this requirement without loss of efficiency. John Potter provided such a reference implementation.]

[Redmond: The LWG was reluctant to adopt the proposal that emerged from Copenhagen: it seemed excessively complicated, and went beyond fixing the defect that we identified in Toronto. PJP provided the new wording described in this issue. Nathan agrees that we shouldn't adopt the more detailed semantics, and notes: "we know that you can do it efficiently enough with a red-black tree, but there are other (perhaps better) balanced tree techniques that might differ enough to make the detailed semantics hard to satisfy."]

[Curaçao: Nathan should give us the alternative wording he suggests so the LWG can decide between the two options.]

[Lillehammer: The LWG previously rejected the more detailed semantics, because it seemed more loike a new feature than like defect fixing. We're now more sympathetic to it, but we (especially Bill) are still worried about performance. N1780 describes a naive algorithm, but it's not clear whether there is a non-naive implementation. Is it possible to implement this as efficently as the current version of insert?]

[Post Lillehammer: N1780 updated in post meeting mailing with feedback from Lillehammer with more information regarding performance. ]

247. vector, deque::insert complexity

Section: [lib.vector.modifiers]  Status: Ready  Submitter: Lisa Lippincott  Date: 06 June 2000

Paragraph 2 of [lib.vector.modifiers] describes the complexity of vector::insert:

Complexity: If first and last are forward iterators, bidirectional iterators, or random access iterators, the complexity is linear in the number of elements in the range [first, last) plus the distance to the end of the vector. If they are input iterators, the complexity is proportional to the number of elements in the range [first, last) times the distance to the end of the vector.

First, this fails to address the non-iterator forms of insert.

Second, the complexity for input iterators misses an edge case -- it requires that an arbitrary number of elements can be added at the end of a vector in constant time.

I looked to see if deque had a similar problem, and was surprised to find that deque places no requirement on the complexity of inserting multiple elements ( [lib.deque.modifiers], paragraph 3):

Complexity: In the worst case, inserting a single element into a deque takes time linear in the minimum of the distance from the insertion point to the beginning of the deque and the distance from the insertion point to the end of the deque. Inserting a single element either at the beginning or end of a deque always takes constant time and causes a single call to the copy constructor of T.

Proposed resolution:

Change Paragraph 2 of [lib.vector.modifiers] to

Complexity: The complexity is linear in the number of elements inserted plus the distance to the end of the vector.

[For input iterators, one may achieve this complexity by first inserting at the end of the vector, and then using rotate.]

Change [lib.deque.modifiers], paragraph 3, to:

Complexity: The complexity is linear in the number of elements inserted plus the shorter of the distances to the beginning and end of the deque. Inserting a single element at either the beginning or the end of a deque causes a single call to the copy constructor of T.


This is a real defect, and proposed resolution fixes it: some complexities aren't specified that should be. This proposed resolution does constrain deque implementations (it rules out the most naive possible implementations), but the LWG doesn't see a reason to permit that implementation.

254. Exception types in clause 19 are constructed from std::string

Section: 19.1 [lib.std.exceptions]  Status: Open  Submitter: Dave Abrahams  Date: 01 Aug 2000

Many of the standard exception types which implementations are required to throw are constructed with a const std::string& parameter. For example:

     19.1.5  Class out_of_range                          [lib.out.of.range]
     namespace std {
       class out_of_range : public logic_error {
         explicit out_of_range(const string& what_arg);

   1 The class out_of_range defines the type of objects  thrown  as  excep-
     tions to report an argument value not in its expected range.

     out_of_range(const string& what_arg);

       Constructs an object of class out_of_range.
       strcmp(what(), what_arg.c_str()) == 0.

There are at least two problems with this:

  1. A program which is low on memory may end up throwing std::bad_alloc instead of out_of_range because memory runs out while constructing the exception object.
  2. An obvious implementation which stores a std::string data member may end up invoking terminate() during exception unwinding because the exception object allocates memory (or rather fails to) as it is being copied.

There may be no cure for (1) other than changing the interface to out_of_range, though one could reasonably argue that (1) is not a defect. Personally I don't care that much if out-of-memory is reported when I only have 20 bytes left, in the case when out_of_range would have been reported. People who use exception-specifications might care a lot, though.

There is a cure for (2), but it isn't completely obvious. I think a note for implementors should be made in the standard. Avoiding possible termination in this case shouldn't be left up to chance. The cure is to use a reference-counted "string" implementation in the exception object. I am not necessarily referring to a std::string here; any simple reference-counting scheme for a NTBS would do.

Further discussion, in email:

...I'm not so concerned about (1). After all, a library implementation can add const char* constructors as an extension, and users don't need to avail themselves of the standard exceptions, though this is a lame position to be forced into. FWIW, std::exception and std::bad_alloc don't require a temporary basic_string.

...I don't think the fixed-size buffer is a solution to the problem, strictly speaking, because you can't satisfy the postcondition
  strcmp(what(), what_arg.c_str()) == 0
For all values of what_arg (i.e. very long values). That means that the only truly conforming solution requires a dynamic allocation.

Further discussion, from Redmond:

The most important progress we made at the Redmond meeting was realizing that there are two separable issues here: the const string& constructor, and the copy constructor. If a user writes something like throw std::out_of_range("foo"), the const string& constructor is invoked before anything gets thrown. The copy constructor is potentially invoked during stack unwinding.

The copy constructor is a more serious problem, becuase failure during stack unwinding invokes terminate. The copy constructor must be nothrow. Curaçao: Howard thinks this requirement may already be present.

The fundamental problem is that it's difficult to get the nothrow requirement to work well with the requirement that the exception objects store a string of unbounded size, particularly if you also try to make the const string& constructor nothrow. Options discussed include:

(Not all of these options are mutually exclusive.)

Proposed resolution:


Throwing a bad_alloc while trying to construct a message for another exception-derived class is not necessarily a bad thing. And the bad_alloc constructor already has a no throw spec on it (


All involved would like to see const char* constructors added, but this should probably be done for C++0X as opposed to a DR.

I believe the no throw specs currently decorating these functions could be improved by some kind of static no throw spec checking mechanism (in a future C++ language). As they stand, the copy constructors might fail via a call to unexpected. I think what is intended here is that the copy constructors can't fail.

[Pre-Sydney: reopened at the request of Howard Hinnant. Post-Redmond: James Kanze noticed that the copy constructors of exception-derived classes do not have nothrow clauses. Those classes have no copy constructors declared, meaning the compiler-generated implicit copy constructors are used, and those compiler-generated constructors might in principle throw anything.]

258. Missing allocator requirement

Section: 20.1.5 [lib.allocator.requirements]  Status: Open  Submitter: Matt Austern  Date: 22 Aug 2000

From lib-7752:

I've been assuming (and probably everyone else has been assuming) that allocator instances have a particular property, and I don't think that property can be deduced from anything in Table 32.

I think we have to assume that allocator type conversion is a homomorphism. That is, if x1 and x2 are of type X, where X::value_type is T, and if type Y is X::template rebind<U>::other, then Y(x1) == Y(x2) if and only if x1 == x2.

Further discussion: Howard Hinnant writes, in lib-7757:

I think I can prove that this is not provable by Table 32. And I agree it needs to be true except for the "and only if". If x1 != x2, I see no reason why it can't be true that Y(x1) == Y(x2). Admittedly I can't think of a practical instance where this would happen, or be valuable. But I also don't see a need to add that extra restriction. I think we only need:

if (x1 == x2) then Y(x1) == Y(x2)

If we decide that == on allocators is transitive, then I think I can prove the above. But I don't think == is necessarily transitive on allocators. That is:

Given x1 == x2 and x2 == x3, this does not mean x1 == x3.


x1 can deallocate pointers from: x1, x2, x3
x2 can deallocate pointers from: x1, x2, x4
x3 can deallocate pointers from: x1, x3
x4 can deallocate pointers from: x2, x4

x1 == x2, and x2 == x4, but x1 != x4

Proposed resolution:

[Toronto: LWG members offered multiple opinions. One opinion is that it should not be required that x1 == x2 implies Y(x1) == Y(x2), and that it should not even be required that X(x1) == x1. Another opinion is that the second line from the bottom in table 32 already implies the desired property. This issue should be considered in light of other issues related to allocator instances.]

290. Requirements to for_each and its function object

Section: 25.1.1 [lib.alg.foreach]  Status: Open  Submitter: Angelika Langer  Date: 03 Jan 2001

The specification of the for_each algorithm does not have a "Requires" section, which means that there are no restrictions imposed on the function object whatsoever. In essence it means that I can provide any function object with arbitrary side effects and I can still expect a predictable result. In particular I can expect that the function object is applied exactly last - first times, which is promised in the "Complexity" section.

I don't see how any implementation can give such a guarantee without imposing requirements on the function object.

Just as an example: consider a function object that removes elements from the input sequence. In that case, what does the complexity guarantee (applies f exactly last - first times) mean?

One can argue that this is obviously a nonsensical application and a theoretical case, which unfortunately it isn't. I have seen programmers shooting themselves in the foot this way, and they did not understand that there are restrictions even if the description of the algorithm does not say so.

Proposed resolution:

[Lillehammer: This is more general than for_each. We don't want the function object in transform invalidiating iterators either. There should be a note somewhere in clause 17 (17, not 25) saying that user code operating on a range may not invalidate iterators unless otherwise specified. Bill will provide wording.]

294. User defined macros and standard headers

Section: [lib.macro.names]  Status: Ready  Submitter: James Kanze  Date: 11 Jan 2001

Paragraph 2 of [lib.macro.names] reads: "A translation unit that includes a header shall not contain any macros that define names declared in that header." As I read this, it would mean that the following program is legal:

  #define npos 3.14
  #include <sstream>

since npos is not defined in <sstream>. It is, however, defined in <string>, and it is hard to imagine an implementation in which <sstream> didn't include <string>.

I think that this phrase was probably formulated before it was decided that a standard header may freely include other standard headers. The phrase would be perfectly appropriate for C, for example. In light of [lib.res.on.headers] paragraph 1, however, it isn't stringent enough.

Proposed resolution:

For [lib.macro.names], replace the current wording, which reads:

Each name defined as a macro in a header is reserved to the implementation for any use if the translation unit includes the header.168)

A translation unit that includes a header shall not contain any macros that define names declared or defined in that header. Nor shall such a translation unit define macros for names lexically identical to keywords.

168) It is not permissible to remove a library macro definition by using the #undef directive.

with the wording:

A translation unit that includes a standard library header shall not #define or #undef names declared in any standard library header.

A translation unit shall not #define or #undef names lexically identical to keywords.

[Lillehammer: Beman provided new wording]

299. Incorrect return types for iterator dereference

Section: 24.1.4 [lib.bidirectional.iterators], 24.1.5 [lib.random.access.iterators]  Status: Open  Submitter: John Potter  Date: 22 Jan 2001

In section 24.1.4 [lib.bidirectional.iterators], Table 75 gives the return type of *r-- as convertible to T. This is not consistent with Table 74 which gives the return type of *r++ as T&. *r++ = t is valid while *r-- = t is invalid.

In section 24.1.5 [lib.random.access.iterators], Table 76 gives the return type of a[n] as convertible to T. This is not consistent with the semantics of *(a + n) which returns T& by Table 74. *(a + n) = t is valid while a[n] = t is invalid.

Discussion from the Copenhagen meeting: the first part is uncontroversial. The second part, operator[] for Random Access Iterators, requires more thought. There are reasonable arguments on both sides. Return by value from operator[] enables some potentially useful iterators, e.g. a random access "iota iterator" (a.k.a "counting iterator" or "int iterator"). There isn't any obvious way to do this with return-by-reference, since the reference would be to a temporary. On the other hand, reverse_iterator takes an arbitrary Random Access Iterator as template argument, and its operator[] returns by reference. If we decided that the return type in Table 76 was correct, we would have to change reverse_iterator. This change would probably affect user code.

History: the contradiction between reverse_iterator and the Random Access Iterator requirements has been present from an early stage. In both the STL proposal adopted by the committee (N0527==94-0140) and the STL technical report (HPL-95-11 (R.1), by Stepanov and Lee), the Random Access Iterator requirements say that operator[]'s return value is "convertible to T". In N0527 reverse_iterator's operator[] returns by value, but in HPL-95-11 (R.1), and in the STL implementation that HP released to the public, reverse_iterator's operator[] returns by reference. In 1995, the standard was amended to reflect the contents of HPL-95-11 (R.1). The original intent for operator[] is unclear.

In the long term it may be desirable to add more fine-grained iterator requirements, so that access method and traversal strategy can be decoupled. (See "Improved Iterator Categories and Requirements", N1297 = 01-0011, by Jeremy Siek.) Any decisions about issue 299 should keep this possibility in mind.

Further discussion: I propose a compromise between John Potter's resolution, which requires T& as the return type of a[n], and the current wording, which requires convertible to T. The compromise is to keep the convertible to T for the return type of the expression a[n], but to also add a[n] = t as a valid expression. This compromise "saves" the common case uses of random access iterators, while at the same time allowing iterators such as counting iterator and caching file iterators to remain random access iterators (iterators where the lifetime of the object returned by operator*() is tied to the lifetime of the iterator).

Note that the compromise resolution necessitates a change to reverse_iterator. It would need to use a proxy to support a[n] = t.

Note also there is one kind of mutable random access iterator that will no longer meet the new requirements. Currently, iterators that return an r-value from operator[] meet the requirements for a mutable random access iterartor, even though the expression a[n] = t will only modify a temporary that goes away. With this proposed resolution, a[n] = t will be required to have the same operational semantics as *(a + n) = t.

Proposed resolution:

In section 24.1.4 [lib.bidirectdional.iterators], change the return type in table 75 from "convertible to T" to T&.

In section 24.1.5 [lib.random.access.iterators], change the operational semantics for a[n] to " the r-value of a[n] is equivalent to the r-value of *(a + n)". Add a new row in the table for the expression a[n] = t with a return type of convertible to T and operational semantics of *(a + n) = t.

[Lillehammer: Real problem, but should be addressed as part of iterator redesign]

342. seek and eofbit

Section: [lib.istream.unformatted]  Status: Ready  Submitter: Howard Hinnant  Date: 09 Oct 2001

I think we have a defect.

According to lwg issue 60 which is now a dr, the description of seekg in [lib.istream.unformatted] paragraph 38 now looks like:

Behaves as an unformatted input function (as described in, paragraph 1), except that it does not count the number of characters extracted and does not affect the value returned by subsequent calls to gcount(). After constructing a sentry object, if fail() != true, executes rdbuf()­>pubseekpos( pos).

And according to lwg issue 243 which is also now a dr,, paragraph 1 looks like:

Each unformatted input function begins execution by constructing an object of class sentry with the default argument noskipws (second) argument true. If the sentry object returns true, when converted to a value of type bool, the function endeavors to obtain the requested input. Otherwise, if the sentry constructor exits by throwing an exception or if the sentry object returns false, when converted to a value of type bool, the function returns without attempting to obtain any input. In either case the number of extracted characters is set to 0; unformatted input functions taking a character array of non-zero size as an argument shall also store a null character (using charT()) in the first location of the array. If an exception is thrown during input then ios::badbit is turned on in *this'ss error state. If (exception()&badbit)!= 0 then the exception is rethrown. It also counts the number of characters extracted. If no exception has been thrown it ends by storing the count in a member object and returning the value specified. In any event the sentry object is destroyed before leaving the unformatted input function.

And finally says this about sentry:

If, after any preparation is completed, is.good() is true, ok_ != false otherwise, ok_ == false.

So although the seekg paragraph says that the operation proceeds if !fail(), the behavior of unformatted functions says the operation proceeds only if good(). The two statements are contradictory when only eofbit is set. I don't think the current text is clear which condition should be respected.

Further discussion from Redmond:

PJP: It doesn't seem quite right to say that seekg is "unformatted". That makes specific claims about sentry that aren't quite appropriate for seeking, which has less fragile failure modes than actual input. If we do really mean that it's unformatted input, it should behave the same way as other unformatted input. On the other hand, "principle of least surprise" is that seeking from EOF ought to be OK.

Proposed resolution:

Change [lib.istream.unformatted] to:

Behaves as an unformatted input function (as described in, paragraph 1), except that it does not count the number of characters extracted, does not affect the value returned by subsequent calls to gcount(), and does not examine the value returned by the sentry object. After constructing a sentry object, if fail() != true, executes rdbuf()->pubseekpos(pos). In case of success, the function calls clear(). In case of failure, the function calls setstate(failbit) (which may throw ios_base::failure).

[Lillehammer: Matt provided wording.]


In C, fseek does clear EOF. This is probably what most users would expect. We agree that having eofbit set should not deter a seek, and that a successful seek should clear eofbit. Note that fail() is true only if failbit or badbit is set, so using !fail(), rather than good(), satisfies this goal.

362. bind1st/bind2nd type safety

Section: [lib.bind.1st]  Status: Ready  Submitter: Andrew Demkin  Date: 26 Apr 2002

The definition of bind1st() ( [lib.bind.1st]) can result in the construction of an unsafe binding between incompatible pointer types. For example, given a function whose first parameter type is 'pointer to T', it's possible without error to bind an argument of type 'pointer to U' when U does not derive from T:

   foo(T*, int);

   struct T {};
   struct U {};

   U u;

   int* p;
   int* q;

   for_each(p, q, bind1st(ptr_fun(foo), &u));    // unsafe binding

The definition of bind1st() includes a functional-style conversion to map its argument to the expected argument type of the bound function (see below):

  typename Operation::first_argument_type(x)

A functional-style conversion (5.2.3 [expr.type.conv]) is defined to be semantically equivalent to an explicit cast expression (5.4 [expr.cast]), which may (according to 5.4, paragraph 5) be interpreted as a reinterpret_cast, thus masking the error.

The problem and proposed change also apply to [lib.bind.2nd].

Proposed resolution:

Add this sentence to the end of 20.3.6 [lib.binders]/1: "Binders bind1st and bind2nd are deprecated in favor of std::tr1::bind."

(Notes to editor: (1) when and if tr1::bind is incorporated into the standard, "std::tr1::bind" should be changed to "std::bind". (2) 20.3.6 should probably be moved to Annex D.


There is no point in fixing bind1st and bind2nd. tr1::bind is a superior solution. It solves this problem and others.

369. io stream objects and static ctors

Section: 27.3 [lib.iostream.objects]  Status: Ready  Submitter: Ruslan Abdikeev  Date: 8 Jul 2002

Is it safe to use standard iostream objects from constructors of static objects? Are standard iostream objects constructed and are their associations established at that time?

Surpisingly enough, Standard does NOT require that.

27.3/2 [lib.iostream.objects] guarantees that standard iostream objects are constructed and their associations are established before the body of main() begins execution. It also refers to ios_base::Init class as the panacea for constructors of static objects.

However, there's nothing in 27.3 [lib.iostream.objects], in 27.4.2 [lib.ios.base], and in [lib.ios::Init], that would require implementations to allow access to standard iostream objects from constructors of static objects.


Core text refers to some magic object ios_base::Init, which will be discussed below:

"The [standard iostream] objects are constructed, and their associations are established at some time prior to or during first time an object of class basic_ios<charT,traits>::Init is constructed, and in any case before the body of main begins execution." (27.3/2 [lib.iostream.objects])

The first non-normative footnote encourages implementations to initialize standard iostream objects earlier than required.

However, the second non-normative footnote makes an explicit and unsupported claim:

"Constructors and destructors for static objects can access these [standard iostream] objects to read input from stdin or write output to stdout or stderr." (27.3/2 footnote 265 [lib.iostream.objects])

The only bit of magic is related to that ios_base::Init class. AFAIK, the rationale behind ios_base::Init was to bring an instance of this class to each translation unit which #included <iostream> or related header. Such an inclusion would support the claim of footnote quoted above, because in order to use some standard iostream object it is necessary to #include <iostream>.

However, while Standard explicitly describes ios_base::Init as an appropriate class for doing the trick, I failed to found a mention of an _instance_ of ios_base::Init in Standard.

Proposed resolution:

Add to 27.3 [lib.iostream.objects], p2, immediately before the last sentence of the paragraph, the following two sentences:

If a translation unit includes <iostream>, or explicitly constructs an ios_base::Init object, these stream objects shall be constructed before dynamic initialization of non-local objects defined later in that translation unit, and these stream objects shall be destroyed after the destruction of dynamically initialized non-local objects defined later in that translation unit.

[Lillehammer: Matt provided wording.]

[Mont Tremblant: Matt provided revised wording.]


The original proposed resolution unconditionally required implementations to define an ios_base::Init object of some implementation-defined name in the header <iostream>. That's an overspecification. First, defining the object may be unnecessary and even detrimental to performance if an implementation can guarantee that the 8 standard iostream objects will be initialized before any other user-defined object in a program. Second, there is no need to require implementations to document the name of the object.

The new proposed resolution gives users guidance on what they need to do to ensure that stream objects are constructed during startup.

371. Stability of multiset and multimap member functions

Section: 23.1 [lib.container.requirements]  Status: Ready  Submitter: Frank Compagner  Date: 20 Jul 2002

The requirements for multiset and multimap containers (23.1 [lib.containers.requirements], 23.1.2 [lib.associative.reqmnts], 23.3.2 [lib.multimap] and 23.3.4 [lib.multiset]) make no mention of the stability of the required (mutating) member functions. It appears the standard allows these functions to reorder equivalent elements of the container at will, yet the pervasive red-black tree implementation appears to provide stable behaviour.

This is of most concern when considering the behaviour of erase(). A stability requirement would guarantee the correct working of the following 'idiom' that removes elements based on a certain predicate function.

  multimap<int, int> m;
  multimap<int, int>::iterator i = m.begin();
  while (i != m.end()) {
      if (pred(i))
          m.erase (i++);

Although clause 23.1.2/8 guarantees that i remains a valid iterator througout this loop, absence of the stability requirement could potentially result in elements being skipped. This would make this code incorrect, and, furthermore, means that there is no way of erasing these elements without iterating first over the entire container, and second over the elements to be erased. This would be unfortunate, and have a negative impact on both performance and code simplicity.

If the stability requirement is intended, it should be made explicit (probably through an extra paragraph in clause 23.1.2).

If it turns out stability cannot be guaranteed, i'd argue that a remark or footnote is called for (also somewhere in clause 23.1.2) to warn against relying on stable behaviour (as demonstrated by the code above). If most implementations will display stable behaviour, any problems emerging on an implementation without stable behaviour will be hard to track down by users. This would also make the need for an erase_if() member function that much greater.

This issue is somewhat related to LWG issue 130.

Proposed resolution:

Add the following to the end of 23.1.2 [lib.associative.reqmts] paragraph 4: "For multiset and multimap, insertand erase are stable: they preserve the relative ordering of equivalent elements.

[Lillehammer: Matt provided wording]

[Joe Gottman points out that the provided wording does not address multimap and multiset. N1780 also addresses this issue and suggests wording.]

[Mont Tremblant: Changed set and map to multiset and multimap.]


The LWG agrees that this guarantee is necessary for common user idioms to work, and that all existing implementations provide this property. Note that this resolution guarantees stability for multimap and multiset, not for all associative containers in general.

376. basic_streambuf semantics

Section: [lib.stringbuf.virtuals]  Status: Ready  Submitter: Ray Lischner  Date: 14 Aug 2002

In Section [lib.stringbuf.virtuals], Table 90, the implication is that the four conditions should be mutually exclusive, but they are not. The first two cases, as written, are subcases of the third.

As written, it is unclear what should be the result if cases 1 and 2 are both true, but case 3 is false.

Proposed resolution:

Rewrite these conditions as:

(which & (ios_base::in|ios_base::out)) == ios_base::in

(which & (ios_base::in|ios_base::out)) == ios_base::out

(which & (ios_base::in|ios_base::out)) == (ios_base::in|ios_base::out) and way == either ios_base::beg or ios_base::end



It's clear what we wanted to say, we just failed to say it. This fixes it.

382. codecvt do_in/out result

Section: [lib.locale.codecvt]  Status: Open  Submitter: Martin Sebor  Date: 30 Aug 2002

It seems that the descriptions of codecvt do_in() and do_out() leave sufficient room for interpretation so that two implementations of codecvt may not work correctly with the same filebuf. Specifically, the following seems less than adequately specified:

  1. the conditions under which the functions terminate
  2. precisely when the functions return ok
  3. precisely when the functions return partial
  4. the full set of conditions when the functions return error
  1. [lib.locale.codecvt.virtuals], p2 says this about the effects of the function: ...Stops if it encounters a character it cannot convert... This assumes that there *is* a character to convert. What happens when there is a sequence that doesn't form a valid source character, such as an unassigned or invalid UNICODE character, or a sequence that cannot possibly form a character (e.g., the sequence "\xc0\xff" in UTF-8)?
  2. Table 53 says that the function returns codecvt_base::ok to indicate that the function(s) "completed the conversion." Suppose that the source sequence is "\xc0\x80" in UTF-8, with from pointing to '\xc0' and (from_end==from + 1). It is not clear whether the return value should be ok or partial (see below).
  3. Table 53 says that the function returns codecvt_base::partial if "not all source characters converted." With the from pointers set up the same way as above, it is not clear whether the return value should be partial or ok (see above).
  4. Table 53, in the row describing the meaning of error mistakenly refers to a "from_type" character, without the symbol from_type having been defined. Most likely, the word "source" character is intended, although that is not sufficient. The functions may also fail when they encounter an invalid source sequence that cannot possibly form a valid source character (e.g., as explained in bullet 1 above).

Finally, the conditions described at the end of [lib.locale.codecvt.virtuals], p4 don't seem to be possible:

"A return value of partial, if (from_next == from_end), indicates that either the destination sequence has not absorbed all the available destination elements, or that additional source elements are needed before another destination element can be produced."

If the value is partial, it's not clear to me that (from_next ==from_end) could ever hold if there isn't enough room in the destination buffer. In order for (from_next==from_end) to hold, all characters in that range must have been successfully converted (according to [lib.locale.codecvt.virtuals], p2) and since there are no further source characters to convert, no more room in the destination buffer can be needed.

It's also not clear to me that (from_next==from_end) could ever hold if additional source elements are needed to produce another destination character (not element as incorrectly stated in the text). partial is returned if "not all source characters have been converted" according to Table 53, which also implies that (from_next==from) does NOT hold.

Could it be that the intended qualifying condition was actually (from_next != from_end), i.e., that the sentence was supposed to read

"A return value of partial, if (from_next != from_end),..."

which would make perfect sense, since, as far as I understand it, partial can only occur if (from_next != from_end)?

Proposed resolution:

[Lillehammer: Defer for the moment, but this really needs to be fixed. Right now, the description of codecvt is too vague for it to be a useful contract between providers and clients of codecvt facets. (Note that both vendors and users can be both providers and clients of codecvt facets.) The major philosophical issue is whether the standard should only describe mappings that take a single wide character to multiple narrow characters (and vice versa), or whether it should describe fully general N-to-M conversions. When the original standard was written only the former was contemplated, but today, in light of the popularity of utf8 and utf16, that doesn't seem sufficient for C++0x. Bill supports general N-to-M conversions; we need to make sure Martin and Howard agree.]

384. equal_range has unimplementable runtime complexity

Section: [lib.equal.range]  Status: Ready  Submitter: Hans Bos  Date: 18 Oct 2002

Section [lib.equal.range] states that at most 2 * log(last - first) + 1 comparisons are allowed for equal_range.

It is not possible to implement equal_range with these constraints.

In a range of one element as in:

    int x = 1;
    equal_range(&x, &x + 1, 1)

it is easy to see that at least 2 comparison operations are needed.

For this case at most 2 * log(1) + 1 = 1 comparison is allowed.

I have checked a few libraries and they all use the same (nonconforming) algorithm for equal_range that has a complexity of

     2* log(distance(first, last)) + 2.

I guess this is the algorithm that the standard assumes for equal_range.

It is easy to see that 2 * log(distance) + 2 comparisons are enough since equal range can be implemented with lower_bound and upper_bound (both log(distance) + 1).

I think it is better to require something like 2log(distance) + O(1) (or even logarithmic as multiset::equal_range). Then an implementation has more room to optimize for certain cases (e.g. have log(distance) characteristics when at most match is found in the range but 2log(distance) + 4 for the worst case).

Proposed resolution:

In [lib.lower.bound]/4, change log(last - first) + 1 to log2(last - first) + O(1).

In [lib.upper.bound]/4, change log(last - first) + 1 to log2(last - first) + O(1).

In [lib.equal.range]/4, change 2*log(last - first) + 1 to 2*log2(last - first) + O(1).

[Matt provided wording]


The LWG considered just saying O(log n) for all three, but Ê decided that threw away too much valuable information.Ê The fact Ê that lower_bound is twice as fast as equal_range is important. Ê However, it's better to allow an arbitrary additive constant than to Ê specify an exact count.Ê An exact count would have to Ê involve floor or ceil.Ê It would be too easy to Ê get this wrong, and don't provide any substantial value for users.

385. Does call by value imply the CopyConstructible requirement?

Section: 17 [lib.library]  Status: Open  Submitter: Matt Austern  Date: 23 Oct 2002

Many function templates have parameters that are passed by value; a typical example is find_if's pred parameter in 25.1.2 [lib.alg.find]. Are the corresponding template parameters (Predicate in this case) implicitly required to be CopyConstructible, or does that need to be spelled out explicitly?

This isn't quite as silly a question as it might seem to be at first sight. If you call find_if in such a way that template argument deduction applies, then of course you'll get call by value and you need to provide a copy constructor. If you explicitly provide the template arguments, however, you can force call by reference by writing something like find_if<my_iterator, my_predicate&>. The question is whether implementation are required to accept this, or whether this is ill-formed because my_predicate& is not CopyConstructible.

The scope of this problem, if it is a problem, is unknown. Function object arguments to generic algorithms in clauses 25 [lib.algorithms] and 26 [lib.numerics] are obvious examples. A review of the whole library is necessary.

Proposed resolution:

[ This is really two issues. First, predicates are typically passed by value but we don't say they must be Copy Constructible. They should be. Second: is specialization allowed to transform value arguments into references? References aren't copy constructible, so this should not be allowed. ]

387. std::complex over-encapsulated

Section: 26.2 [lib.complex.numbers]  Status: Open  Submitter: Gabriel Dos Reis  Date: 8 Nov 2002

The absence of explicit description of std::complex<T> layout makes it imposible to reuse existing software developed in traditional languages like Fortran or C with unambigous and commonly accepted layout assumptions. There ought to be a way for practitioners to predict with confidence the layout of std::complex<T> whenever T is a numerical datatype. The absence of ways to access individual parts of a std::complex<T> object as lvalues unduly promotes severe pessimizations. For example, the only way to change, independently, the real and imaginary parts is to write something like

complex<T> z;
// ...
// set the real part to r
z = complex<T>(r, z.imag());
// ...
// set the imaginary part to i
z = complex<T>(z.real(), i);

At this point, it seems appropriate to recall that a complex number is, in effect, just a pair of numbers with no particular invariant to maintain. Existing practice in numerical computations has it that a complex number datatype is usually represented by Cartesian coordinates. Therefore the over-encapsulation put in the specification of std::complex<> is not justified.

Proposed resolution:

Add the following requirements to 26.2 [lib.complex.numbers] as 26.2/4:

If z is an lvalue expression of type cv std::complex<T> then

Moreover, if a is an expression of pointer type cv complex<T>* and the expression a[i] is well-defined for an integer expression i then:

In the header synopsis in 26.2.1 [lib.complex.synopsis], replace

  template<class T> T real(const complex<T>&);
  template<class T> T imag(const complex<T>&);


  template<class T> const T& real(const complex<T>&);
  template<class T>       T& real(      complex<T>&);
  template<class T> const T& imag(const complex<T>&);
  template<class T>       T& imag(      complex<T>&);

In 26.2.7 [lib.complex.value.ops] paragraph 1, change

  template<class T> T real(const complex<T>&);


  template<class T> const T& real(const complex<T>&);
  template<class T>       T& real(      complex<T>&);

and change the Returns clause to "Returns: The real part of x


In 26.2.7 [lib.complex.value.ops] paragraph 2, change

  template<class T> T imag(const complex<T>&);


  template<class T> const T& imag(const complex<T>&);
  template<class T>       T& imag(      complex<T>&);

and change the Returns clause to "Returns: The imaginary part of x


[Kona: The layout guarantee is absolutely necessary for C compatibility. However, there was disagreement about the other part of this proposal: retrieving elements of the complex number as lvalues. An alternative: continue to have real() and imag() return rvalues, but add set_real() and set_imag(). Straw poll: return lvalues - 2, add setter functions - 5. Related issue: do we want reinterpret_cast as the interface for converting a complex to an array of two reals, or do we want to provide a more explicit way of doing it? Howard will try to resolve this issue for the next meeting.]

[pre-Sydney: Howard summarized the options in n1589.]


The LWG believes that C99 compatibility would be enough justification for this change even without other considerations. All existing implementations already have the layout proposed here.

394. behavior of formatted output on failure

Section: [lib.ostream.formatted.reqmts]  Status: Open  Submitter: Martin Sebor  Date: 27 Dec 2002

There is a contradiction in Formatted output about what bit is supposed to be set if the formatting fails. On sentence says it's badbit and another that it's failbit., p1 says in the Common Requirements on Formatted output functions:

     ... If the generation fails, then the formatted output function
     does setstate(ios::failbit), which might throw an exception., p1 goes on to say this about Arithmetic Inserters:

... The formatting conversion occurs as if it performed the following code fragment:

     bool failed =
         > >
         (getloc()).put(*this, *this, fill(), val). failed();

     ... If failed is true then does setstate(badbit) ...

The original intent of the text, according to Jerry Schwarz (see c++std-lib-10500), is captured in the following paragraph:

In general "badbit" should mean that the stream is unusable because of some underlying failure, such as disk full or socket closure; "failbit" should mean that the requested formatting wasn't possible because of some inconsistency such as negative widths. So typically if you clear badbit and try to output something else you'll fail again, but if you clear failbit and try to output something else you'll succeed.

In the case of the arithmetic inserters, since num_put cannot report failure by any means other than exceptions (in response to which the stream must set badbit, which prevents the kind of recoverable error reporting mentioned above), the only other detectable failure is if the iterator returned from num_put returns true from failed().

Since that can only happen (at least with the required iostream specializations) under such conditions as the underlying failure referred to above (e.g., disk full), setting badbit would seem to be the appropriate response (indeed, it is required in, p1). It follows that failbit can never be directly set by the arithmetic (it can only be set by the sentry object under some unspecified conditions).

The situation is different for other formatted output functions which can fail as a result of the streambuf functions failing (they may do so by means other than exceptions), and which are then required to set failbit.

The contradiction, then, is that ostream::operator<<(int) will set badbit if the disk is full, while operator<<(ostream&, char) will set failbit under the same conditions. To make the behavior consistent, the Common requirements sections for the Formatted output functions should be changed as proposed below.

Proposed resolution:

[Kona: There's agreement that this is a real issue. What we decided at Kona: 1. An error from the buffer (which can be detected either directly from streambuf's member functions or by examining a streambuf_iterator) should always result in badbit getting set. 2. There should never be a circumstance where failbit gets set. That represents a formatting error, and there are no circumstances under which the output facets are specified as signaling a formatting error. (Even more so for string output that for numeric because there's nothing to format.) If we ever decide to make it possible for formatting errors to exist then the facets can signal the error directly, and that should go in clause 22, not clause 27. 3. The phrase "if generation fails" is unclear and should be eliminated. It's not clear whether it's intended to mean a buffer error (e.g. a full disk), a formatting error, or something else. Most people thought it was supposed to refer to buffer errors; if so, we should say so. Martin will provide wording.]


396. what are characters zero and one

Section: [lib.bitset.cons]  Status: Open  Submitter: Martin Sebor  Date: 5 Jan 2003, p6 [lib.bitset.cons] talks about a generic character having the value of 0 or 1 but there is no definition of what that means for charT other than char and wchar_t. And even for those two types, the values 0 and 1 are not actually what is intended -- the values '0' and '1' are. This, along with the converse problem in the description of to_string() in, p33, looks like a defect remotely related to DR 303.
  -6-  An element of the constructed string has value zero if the
       corresponding character in str, beginning at position pos,
       is 0. Otherwise, the element has the value one.
  -33-  Effects: Constructs a string object of the appropriate
        type and initializes it to a string of length N characters.
        Each character is determined by the value of its
        corresponding bit position in *this. Character position N
        ?- 1 corresponds to bit position zero. Subsequent decreasing
        character positions correspond to increasing bit positions.
        Bit value zero becomes the character 0, bit value one becomes
        the character 1.

Also note the typo in, p6: the object under construction is a bitset, not a string.

Proposed resolution:

Change the constructor's function declaration immediately before [lib.bitset.cons] p3 to:

    template <class charT, class traits, class Allocator>
    bitset(const basic_string<charT, traits, Allocator>& str,
           typename basic_string<charT, traits, Allocator>::size_type pos = 0,
           typename basic_string<charT, traits, Allocator>::size_type n =
             basic_string<charT, traits, Allocator>::npos,
           charT zero = charT('0'), charT one = charT('1'))

Change the first two sentences of [lib.bitset.cons] p6 to: "An element of the constructed string has value 0 if the corresponding character in str, beginning at position pos, is zero. Otherwise, the element has the value 1.

Change the text of the second sentence in, p5 to read: "The function then throws invalid_argument if any of the rlen characters in str beginning at position pos is other than zero or one. The function uses traits::eq() to compare the character values."

Change the declaration of the to_string member function immediately before [lib.bitset.members] p33 to:

    template <class charT, class traits, class Allocator>
    basic_string<charT, traits, Allocator> 
    to_string(charT zero = charT('0'), charT one = charT('1')) const;

Change the last sentence of [lib.bitset.members] p33 to: "Bit value 0 becomes the character zero, bit value 1 becomes the character one.

Change [lib.bitset.operators] p8 to:


  os << x.template to_string<charT,traits,allocator<charT> >(
      use_facet<ctype<charT> >(os.getloc()).widen('0'),
      use_facet<ctype<charT> >(os.getloc()).widen('1'));


There is a real problem here: we need the character values of '0' and '1', and we have no way to get them since strings don't have imbued locales. In principle the "right" solution would be to provide an extra object, either a ctype facet or a full locale, which would be used to widen '0' and '1'. However, there was some discomfort about using such a heavyweight mechanism. The proposed resolution allows those users who care about this issue to get it right.

We fix the inserter to use the new arguments. Note that we already fixed the analogous problem with the extractor in issue 303.

397. ostream::sentry dtor throws exceptions

Section: [lib.ostream::sentry]  Status: Open  Submitter: Martin Sebor  Date: 5 Jan 2003, p3 prohibits library dtors from throwing exceptions., p4 says this about the ostream::sentry dtor:

    -4- If ((os.flags() & ios_base::unitbuf) && !uncaught_exception())
        is true, calls os.flush()., p7 that describes ostream::flush() says:

    -7- If rdbuf() is not a null pointer, calls rdbuf()->pubsync().
        If that function returns ?-1 calls setstate(badbit) (which
        may throw ios_base::failure (

That seems like a defect, since both pubsync() and setstate() can throw an exception.

Proposed resolution:

[ The contradiction is real. Clause 17 says destructors may never throw exceptions, and clause 27 specifies a destructor that does throw. In principle we might change either one. We're leaning toward changing clause 17: putting in an "unless otherwise specified" clause, and then putting in a footnote saying the sentry destructor is the only one that can throw. PJP suggests specifying that sentry::~sentry() should internally catch any exceptions it might cause. ]

398. effects of end-of-file on unformatted input functions

Section: [lib.ostream::sentry]  Status: Open  Submitter: Martin Sebor  Date: 5 Jan 2003

While reviewing unformatted input member functions of istream for their behavior when they encounter end-of-file during input I found that the requirements vary, sometimes unexpectedly, and in more than one case even contradict established practice (GNU libstdc++ 3.2, IBM VAC++ 6.0, STLPort 4.5, SunPro 5.3, HP aCC 5.38, Rogue Wave libstd 3.1, and Classic Iostreams).

The following unformatted input member functions set eofbit if they encounter an end-of-file (this is the expected behavior, and also the behavior of all major implementations):

    basic_istream<charT, traits>&
    get (char_type*, streamsize, char_type);

Also sets failbit if it fails to extract any characters.

    basic_istream<charT, traits>&
    get (char_type*, streamsize);

Also sets failbit if it fails to extract any characters.

    basic_istream<charT, traits>&
    getline (char_type*, streamsize, char_type);

Also sets failbit if it fails to extract any characters.

    basic_istream<charT, traits>&
    getline (char_type*, streamsize);

Also sets failbit if it fails to extract any characters.

    basic_istream<charT, traits>&
    ignore (int, int_type);

    basic_istream<charT, traits>&
    read (char_type*, streamsize);

Also sets failbit if it encounters end-of-file.

    streamsize readsome (char_type*, streamsize);

The following unformated input member functions set failbit but not eofbit if they encounter an end-of-file (I find this odd since the functions make it impossible to distinguish a general failure from a failure due to end-of-file; the requirement is also in conflict with all major implementation which set both eofbit and failbit):

    int_type get();

    basic_istream<charT, traits>&
    get (char_type&);

These functions only set failbit of they extract no characters, otherwise they don't set any bits, even on failure (I find this inconsistency quite unexpected; the requirement is also in conflict with all major implementations which set eofbit whenever they encounter end-of-file):

    basic_istream<charT, traits>&
    get (basic_streambuf<charT, traits>&, char_type);

    basic_istream<charT, traits>&
    get (basic_streambuf<charT, traits>&);

This function sets no bits (all implementations except for STLport and Classic Iostreams set eofbit when they encounter end-of-file):

    int_type peek ();

Proposed resolution:

Informally, what we want is a global statement of intent saying that eofbit gets set if we trip across EOF, and then we can take away the specific wording for individual functions. A full review is necessary. The wording currently in the standard is a mishmash, and changing it on an individual basis wouldn't make things better. Dietmar will do this work.

401.  incorrect type casts in table 32 in lib.allocator.requirements

Section: 20.1.5 [lib.allocator.requirements]  Status: Open  Submitter: Markus Mauhart  Date: 27 Feb 2003

I think that in par2 of 20.1.5 [lib.allocator.requirements] the last two lines of table 32 contain two incorrect type casts. The lines are ...

  a.construct(p,t)   Effect: new((void*)p) T(t)
  a.destroy(p)       Effect: ((T*)p)?->~T()

.... with the prerequisits coming from the preceding two paragraphs, especially from table 31:

  alloc<T>             a     ;// an allocator for T
  alloc<T>::pointer    p     ;// random access iterator
                              // (may be different from T*)
  alloc<T>::reference  r = *p;// T&
  T const&             t     ;

For that two type casts ("(void*)p" and "(T*)p") to be well-formed this would require then conversions to T* and void* for all alloc<T>::pointer, so it would implicitely introduce extra requirements for alloc<T>::pointer, additionally to the only current requirement (being a random access iterator).

Proposed resolution:

"(void*)p" should be replaced with "(void*)&*p" and that "((T*)p)?->" should be replaced with "(*p)." or with "(&*p)->".

Note: Actually I would prefer to replace "((T*)p)?->dtor_name" with "p?->dtor_name", but AFAICS this is not possible cause of an omission in 13.5.6 [over.ref] (for which I have filed another DR on 29.11.2002).

[Kona: The LWG thinks this is somewhere on the border between Open and NAD. The intend is clear: construct constructs an object at the location p. It's reading too much into the description to think that literally calling new is required. Tweaking this description is low priority until we can do a thorough review of allocators, and, in particular, allocators with non-default pointer types.]

408. Is vector<reverse_iterator<char*> > forbidden?

Section: 24.1 [lib.iterator.requirements]  Status: Open  Submitter: Nathan Myers  Date: 3 June 2003

I've been discussing iterator semantics with Dave Abrahams, and a surprise has popped up. I don't think this has been discussed before.

24.1 [lib.iterator.requirements] says that the only operation that can be performed on "singular" iterator values is to assign a non-singular value to them. (It doesn't say they can be destroyed, and that's probably a defect.) Some implementations have taken this to imply that there is no need to initialize the data member of a reverse_iterator<> in the default constructor. As a result, code like

std::vector<std::reverse_iterator<char*> > v(7); v.reserve(1000);

invokes undefined behavior, because it must default-initialize the vector elements, and then copy them to other storage. Of course many other vector operations on these adapters are also left undefined, and which those are is not reliably deducible from the standard.

I don't think that 24.1 was meant to make standard-library iterator types unsafe. Rather, it was meant to restrict what operations may be performed by functions which take general user- and standard iterators as arguments, so that raw pointers would qualify as iterators. However, this is not clear in the text, others have come to the opposite conclusion.

One question is whether the standard iterator adaptors have defined copy semantics. Another is whether they have defined destructor semantics: is

{ std::vector<std::reverse_iterator<char*> > v(7); }

undefined too?

Note this is not a question of whether algorithms are allowed to rely on copy semantics for arbitrary iterators, just whether the types we actually supply support those operations. I believe the resolution must be expressed in terms of the semantics of the adapter's argument type. It should make clear that, e.g., the reverse_iterator<T> constructor is actually required to execute T(), and so copying is defined if the result of T() is copyable.

Issue 235, which defines reverse_iterator's default constructor more precisely, has some relevance to this issue. However, it is not the whole story.

The issue was whether

reverse_iterator() { }

is allowed, vs.

reverse_iterator() : current() { }

The difference is when T is char*, where the first leaves the member uninitialized, and possibly equal to an existing pointer value, or (on some targets) may result in a hardware trap when copied.

8.5 paragraph 5 seems to make clear that the second is required to satisfy DR 235, at least for non-class Iterator argument types.

But that only takes care of reverse_iterator, and doesn't establish a policy for all iterators. (The reverse iterator adapter was just an example.) In particular, does my function

template <typename Iterator> void f() { std::vector<Iterator> v(7); }

evoke undefined behavior for some conforming iterator definitions? I think it does, now, because vector<> will destroy those singular iterator values, and that's explicitly disallowed.

24.1 shouldn't give blanket permission to copy all singular iterators, because then pointers wouldn't qualify as iterators. However, it should allow copying of that subset of singular iterator values that are default-initialized, and it should explicitly allow destroying any iterator value, singular or not, default-initialized or not.

Related issue: 407

Proposed resolution:

[ We don't want to require all singular iterators to be copyable, because that is not the case for pointers. However, default construction may be a special case. Issue: is it really default construction we want to talk about, or is it something like value initialization? We need to check with core to see whether default constructed pointers are required to be copyable; if not, it would be wrong to impose so strict a requirement for iterators. ]

416. definitions of XXX_MIN and XXX_MAX macros in climits

Section: 18.2.2 [lib.c.limits]  Status: Open  Submitter: Martin Sebor  Date: 18 Sep 2003

Given two overloads of the function foo(), one taking an argument of type int and the other taking a long, which one will the call foo(LONG_MAX) resolve to? The expected answer should be foo(long), but whether that is true depends on the #defintion of the LONG_MAX macro, specifically its type. This issue is about the fact that the type of these macros is not actually required to be the same as the the type each respective limit.
Section 18.2.2 of the C++ Standard does not specify the exact types of the XXX_MIN and XXX_MAX macros #defined in the <climits> and <limits.h> headers such as INT_MAX and LONG_MAX and instead defers to the C standard.
Section, p1 of the C standard specifies that "The values [of these constants] shall be replaced by constant expressions suitable for use in #if preprocessing directives. Moreover, except for CHAR_BIT and MB_LEN_MAX, the following shall be replaced by expressions that have the same type as would an expression that is an object of the corresponding type converted according to the integer promotions."
The "corresponding type converted according to the integer promotions" for LONG_MAX is, according to, p5 of the C standard, the type of long converted to the first of the following set of types that can represent it: int, long int, long long int. So on an implementation where (sizeof(long) == sizeof(int)) this type is actually int, while on an implementation where (sizeof(long) > sizeof(int)) holds this type will be long.
This is not an issue in C since the type of the macro cannot be detected by any conforming C program, but it presents a portability problem in C++ where the actual type is easily detectable by overload resolution.

Proposed resolution:

[Kona: the LWG does not believe this is a defect. The C macro definitions are what they are; we've got a better mechanism, std::numeric_limits, that is specified more precisely than the C limit macros. At most we should add a nonnormative note recommending that users who care about the exact types of limit quantities should use <limits> instead of <climits>.]

417. what does ctype::do_widen() return on failure

Section: [lib.locale.ctype.virtuals]  Status: Open  Submitter: Martin Sebor  Date: 18 Sep 2003

The Effects and Returns clauses of the do_widen() member function of the ctype facet fail to specify the behavior of the function on failure. That the function may not be able to simply cast the narrow character argument to the type of the result since doing so may yield the wrong value for some wchar_t encodings. Popular implementations of ctype<wchar_t> that use mbtowc() and UTF-8 as the native encoding (e.g., GNU glibc) will fail when the argument's MSB is set. There is no way for the the rest of locale and iostream to reliably detect this failure.

Proposed resolution:

[Kona: This is a real problem. Widening can fail. It's unclear what the solution should be. Returning WEOF works for the wchar_t specialization, but not in general. One option might be to add a default, like narrow. But that's an incompatible change. Using traits::eof might seem like a good idea, but facets don't have access to traits (a recurring problem). We could have widen throw an exception, but that's a scary option; existing library components aren't written with the assumption that widen can throw.]

418. exceptions thrown during iostream cleanup

Section: [lib.ios::Init]  Status: Open  Submitter: Martin Sebor  Date: 18 Sep 2003

The dtor of the ios_base::Init object is supposed to call flush() on the 6 standard iostream objects cout, cerr, clog, wcout, wcerr, and wclog. This call may cause an exception to be thrown., p3 prohibits all library destructors from throwing exceptions.

The question is: What should this dtor do if one or more of these calls to flush() ends up throwing an exception? This can happen quite easily if one of the facets installed in the locale imbued in the iostream object throws.

Proposed resolution:

[Kona: We probably can't do much better than what we've got, so the LWG is leaning toward NAD. At the point where the standard stream objects are being cleaned up, the usual error reporting mechanism are all unavailable. And exception from flush at this point will definitely cause problems. A quality implementation might reasonably swallow the exception, or call abort, or do something even more drastic.]

419. istream extractors not setting failbit if eofbit is already set

Section: [lib.istream::sentry]  Status: Open  Submitter: Martin Sebor  Date: 18 Sep 2003, p2 says that istream::sentry ctor prepares for input if is.good() is true. p4 then goes on to say that the ctor sets the sentry::ok_ member to true if the stream state is good after any preparation., p1 then says that a formatted input function endeavors to obtain the requested input if the sentry's operator bool() returns true. Given these requirements, no formatted extractor should ever set failbit if the initial stream rdstate() == eofbit. That is contrary to the behavior of all implementations I tested. The program below prints out eof = 1, fail = 0 eof = 1, fail = 1 on all of them.

#include <sstream>
#include <cstdio>

int main()
    std::istringstream strm ("1");

    int i = 0;

    strm >> i;

    std::printf ("eof = %d, fail = %d\n",
                 !!strm.eof (), !! ());

    strm >> i;

    std::printf ("eof = %d, fail = %d\n",
                 !!strm.eof (), !! ());

Comments from Jerry Schwarz (c++std-lib-11373):
Jerry Schwarz wrote:
I don't know where (if anywhere) it says it in the standard, but the formatted extractors are supposed to set failbit if they don't extract any characters. If they didn't then simple loops like
while (cin >> x);
would loop forever.
Further comments from Martin Sebor:
The question is which part of the extraction should prevent this from happening by setting failbit when eofbit is already set. It could either be the sentry object or the extractor. It seems that most implementations have chosen to set failbit in the sentry [...] so that's the text that will need to be corrected.

Proposed resolution:

Kona: Possibly NAD. If eofbit is set then good() will return false. We then set ok to false. We believe that the sentry's constructor should always set failbit when ok is false, and we also think the standard already says that. Possibly it could be clearer.

421. is basic_streambuf copy-constructible?

Section: [lib.streambuf.cons]  Status: Open  Submitter: Martin Sebor  Date: 18 Sep 2003

The reflector thread starting with c++std-lib-11346 notes that the class template basic_streambuf, along with basic_stringbuf and basic_filebuf, is copy-constructible but that the semantics of the copy constructors are not defined anywhere. Further, different implementations behave differently in this respect: some prevent copy construction of objects of these types by declaring their copy ctors and assignment operators private, others exhibit undefined behavior, while others still give these operations well-defined semantics.

Note that this problem doesn't seem to be isolated to just the three types mentioned above. A number of other types in the library section of the standard provide a compiler-generated copy ctor and assignment operator yet fail to specify their semantics. It's believed that the only types for which this is actually a problem (i.e. types where the compiler-generated default may be inappropriate and may not have been intended) are locale facets. See issue 439.

Proposed resolution:

27.5.2 [lib.streambuf]: Add into the synopsis, public section, just above the destructor declaration:

basic_streambuf(const basic_streambuf& sb);
basic_streambuf& operator=(const basic_streambuf& sb);

Insert after, paragraph 2:

basic_streambuf(const basic_streambuf& sb);

Constructs a copy of sb.


                eback() == sb.eback()
                gptr()  == sb.gptr()
                egptr() == sb.egptr()
                pbase() == sb.pbase()
                pptr()  == sb.pptr()
                epptr() == sb.epptr()
                getloc() == sb.getloc()
basic_streambuf& operator=(const basic_streambuf& sb);

Assigns the data members of sb to this.


                eback() == sb.eback()
                gptr()  == sb.gptr()
                egptr() == sb.egptr()
                pbase() == sb.pbase()
                pptr()  == sb.pptr()
                epptr() == sb.epptr()
                getloc() == sb.getloc()

Returns: *this.

27.7.1 [lib.stringbuf]:

Option A:

Insert into the basic_stringbuf synopsis in the private section:

basic_stringbuf(const basic_stringbuf&);             // not defined
basic_stringbuf& operator=(const basic_stringbuf&);  // not defined
Option B:

Insert into the basic_stringbuf synopsis in the public section:

basic_stringbuf(const basic_stringbuf& sb);
basic_stringbuf& operator=(const basic_stringbuf& sb);, insert after paragraph 4:

basic_stringbuf(const basic_stringbuf& sb);

Constructs an independent copy of sb as if with sb.str(), and with the openmode that sb was constructed with.


               str() == sb.str()
               gptr()  - eback() == sb.gptr()  - sb.eback()
               egptr() - eback() == sb.egptr() - sb.eback()
               pptr()  - pbase() == sb.pptr()  - sb.pbase()
               getloc() == sb.getloc()

Note: The only requirement on epptr() is that it point beyond the initialized range if an output sequence exists. There is no requirement that epptr() - pbase() == sb.epptr() - sb.pbase().

basic_stringbuf& operator=(const basic_stringbuf& sb);

After assignment the basic_stringbuf has the same state as if it were initially copy constructed from sb, except that the basic_stringbuf is allowed to retain any excess capacity it might have, which may in turn effect the value of epptr(). [lib.filebuf]

Insert at the bottom of the basic_filebuf synopsis:

  basic_filebuf(const basic_filebuf&);             // not defined
  basic_filebuf& operator=(const basic_filebuf&);  // not defined

[Kona: this is an issue for basic_streambuf itself and for its derived classes. We are leaning toward allowing basic_streambuf to be copyable, and specifying its precise semantics. (Probably the obvious: copying the buffer pointers.) We are less sure whether the streambuf derived classes should be copyable. Howard will write up a proposal.]

[Sydney: Dietmar presented a new argument against basic_streambuf being copyable: it can lead to an encapsulation violation. Filebuf inherits from streambuf. Now suppose you inhert a my_hijacking_buf from streambuf. You can copy the streambuf portion of a filebuf to a my_hijacking_buf, giving you access to the pointers into the filebuf's internal buffer. Perhaps not a very strong argument, but it was strong enough to make people nervous. There was weak preference for having streambuf not be copyable. There was weak preference for having stringbuf not be copyable even if streambuf is. Move this issue to open for now. ]


27.5.2 [lib.streambuf]: The proposed basic_streambuf copy constructor and assignment operator are the same as currently implied by the lack of declarations: public and simply copies the data members. This resolution is not a change but a clarification of the current standard.

27.7.1 [lib.stringbuf]: There are two reasonable options: A) Make basic_stringbuf not copyable. This is likely the status-quo of current implementations. B) Reasonable copy semantics of basic_stringbuf can be defined and implemented. A copyable basic_streambuf is arguably more useful than a non-copyable one. This should be considered as new functionality and not the fixing of a defect. If option B is chosen, ramifications from issue 432 are taken into account. [lib.filebuf]: There are no reasonable copy semantics for basic_filebuf.

422. explicit specializations of member functions of class templates

Section: [lib.reserved.names]  Status: Open  Submitter: Martin Sebor  Date: 18 Sep 2003

It has been suggested that, p1 may or may not allow programs to explicitly specialize members of standard templates on user-defined types. The answer to the question might have an impact where library requirements are given using the "as if" rule. I.e., if programs are allowed to specialize member functions they will be able to detect an implementation's strict conformance to Effects clauses that describe the behavior of the function in terms of the other member function (the one explicitly specialized by the program) by relying on the "as if" rule.

Proposed resolution:

Add the following sentence immediately after the text of [lib.reserved.names], p1:

The behavior of a program that declares explicit specializations of any members of class templates or explicit specializations of any member templates of classes or class templates defined in this library is undefined.

[Kona: straw poll was 6-1 that user programs should not be allowed to specialize individual member functions of standard library class templates, and that doing so invokes undefined behavior. Post-Kona: Martin provided wording.]

[Sydney: The LWG agrees that the standard shouldn't permit users to specialize individual member functions unless they specialize the whole class, but we're not sure these words say what we want them to; they could be read as prohibiting the specialization of any standard library class templates. We need to consult with CWG to make sure we use the right wording.]

423. effects of negative streamsize in iostreams

Section: 27 [lib.input.output]  Status: Open  Submitter: Martin Sebor  Date: 18 Sep 2003

A third party test suite tries to exercise istream::ignore(N) with a negative value of N and expects that the implementation will treat N as if it were 0. Our implementation asserts that (N >= 0) holds and aborts the test.

I can't find anything in section 27 that prohibits such values but I don't see what the effects of such calls should be, either (this applies to a number of unformatted input functions as well as some member functions of the basic_streambuf template).

Proposed resolution:

I propose that we add to each function in clause 27 that takes an argument, say N, of type streamsize a Requires clause saying that "N >= 0." The intent is to allow negative streamsize values in calls to precision() and width() but disallow it in calls to streambuf::sgetn(), istream::ignore(), or ostream::write().

[Kona: The LWG agreed that this is probably what we want. However, we need a review to find all places where functions in clause 27 take arguments of type streamsize that shouldn't be allowed to go negative. Martin will do that review.]

424. normative notes

Section: [lib.structure.summary]  Status: Open  Submitter: Martin Sebor  Date: 18 Sep 2003

The text in, p1 says:
"Paragraphs labelled "Note(s):" or "Example(s):" are informative, other paragraphs are normative."
The library section makes heavy use of paragraphs labeled "Notes(s)," some of which are clearly intended to be normative (see list 1), while some others are not (see list 2). There are also those where the intent is not so clear (see list 3).
List 1 -- Examples of (presumably) normative Notes:, p3,, p10, 21.3.1, p11,, p11,, p2, 25.3.7, p3, 26.2.6, p14a,, p7.
List 2 -- Examples of (presumably) informative Notes:, p3,, p14,, p3, 25.1.1, p4, 26.2.5, p1,, p6.
List 3 -- Examples of Notes that are not clearly either normative or informative:, p8,, p6,, p4.
None of these lists is meant to be exhaustive.

Proposed resolution:

[Definitely a real problem. The big problem is there's material that doesn't quite fit any of the named paragraph categories (e.g. Effects). Either we need a new kind of named paragraph, or we need to put more material in unnamed paragraphs jsut after the signature. We need to talk to the Project Editor about how to do this. ]

427. stage 2 and rationale of DR 221

Section: [lib.facet.num.get.virtuals]  Status: Open  Submitter: Martin Sebor  Date: 18 Sep 2003

The requirements specified in Stage 2 and reiterated in the rationale of DR 221 (and echoed again in DR 303) specify that num_get<charT>:: do_get() compares characters on the stream against the widened elements of ""

An implementation is required to allow programs to instantiate the num_get template on any charT that satisfies the requirements on a user-defined character type. These requirements do not include the ability of the character type to be equality comparable (the char_traits template must be used to perform tests for equality). Hence, the num_get template cannot be implemented to support any arbitrary character type. The num_get template must either make the assumption that the character type is equality-comparable (as some popular implementations do), or it may use char_traits<charT> to do the comparisons (some other popular implementations do that). This diversity of approaches makes it difficult to write portable programs that attempt to instantiate the num_get template on user-defined types.

Proposed resolution:

[Kona: the heart of the problem is that we're theoretically supposed to use traits classes for all fundamental character operations like assignment and comparison, but facets don't have traits parameters. This is a fundamental design flaw and it appears all over the place, not just in this one place. It's not clear what the correct solution is, but a thorough review of facets and traits is in order. The LWG considered and rejected the possibility of changing numeric facets to use narrowing instead of widening. This may be a good idea for other reasons (see issue 459), but it doesn't solve the problem raised by this issue. Whether we use widen or narrow the num_get facet still has no idea which traits class the user wants to use for the comparison, because only streams, not facets, are passed traits classes. The standard does not require that two different traits classes with the same char_type must necessarily have the same behavior.]

Informally, one possibility: require that some of the basic character operations, such as eq, lt, and assign, must behave the same way for all traits classes with the same char_type. If we accept that limitation on traits classes, then the facet could reasonably be required to use char_traits<charT>


430. valarray subset operations

Section: [lib.valarray.sub]  Status: Open  Submitter: Martin Sebor  Date: 18 Sep 2003

The standard fails to specify the behavior of valarray::operator[](slice) and other valarray subset operations when they are passed an "invalid" slice object, i.e., either a slice that doesn't make sense at all (e.g., slice (0, 1, 0) or one that doesn't specify a valid subset of the valarray object (e.g., slice (2, 1, 1) for a valarray of size 1).

Proposed resolution:

[Kona: the LWG believes that invalid slices should invoke undefined behavior. Valarrays are supposed to be designed for high performance, so we don't want to require specific checking. We need wording to express this decision.]

431. Swapping containers with unequal allocators

Section: 20.1.5 [lib.allocator.requirements], 25 [lib.algorithms]  Status: Open  Submitter: Matt Austern  Date: 20 Sep 2003

Clause 20.1.5 [lib.allocator.requirements] paragraph 4 says that implementations are permitted to supply containers that are unable to cope with allocator instances and that container implementations may assume that all instances of an allocator type compare equal. We gave implementers this latitude as a temporary hack, and eventually we want to get rid of it. What happens when we're dealing with allocators that don't compare equal?

In particular: suppose that v1 and v2 are both objects of type vector<int, my_alloc> and that v1.get_allocator() != v2.get_allocator(). What happens if we write v1.swap(v2)? Informally, three possibilities:

1. This operation is illegal. Perhaps we could say that an implementation is required to check and to throw an exception, or perhaps we could say it's undefined behavior.

2. The operation performs a slow swap (i.e. using three invocations of operator=, leaving each allocator with its original container. This would be an O(N) operation.

3. The operation swaps both the vectors' contents and their allocators. This would be an O(1) operation. That is:

    my_alloc a1(...);
    my_alloc a2(...);
    assert(a1 != a2);

    vector<int, my_alloc> v1(a1);
    vector<int, my_alloc> v2(a2);
    assert(a1 == v1.get_allocator());
    assert(a2 == v2.get_allocator());

    assert(a1 == v2.get_allocator());
    assert(a2 == v1.get_allocator());

Proposed resolution:

[Kona: This is part of a general problem. We need a paper saying how to deal with unequal allocators in general.]

[pre-Sydney: Howard argues for option 3 in n1599.]

446. Iterator equality between different containers

Section: 24.1 [lib.iterator.requirements], 23.1 [lib.container.requirements]  Status: Open  Submitter: Andy Koenig  Date: 16 Dec 2003

What requirements does the standard place on equality comparisons between iterators that refer to elements of different containers. For example, if v1 and v2 are empty vectors, is v1.end() == v2.end() allowed to yield true? Is it allowed to throw an exception?

The standard appears to be silent on both questions.

Proposed resolution:

[Sydney: The intention is that comparing two iterators from different containers is undefined, but it's not clear if we say that, or even whether it's something we should be saying in clause 23 or in clause 24. Intuitively we might want to say that equality is defined only if one iterator is reachable from another, but figuring out how to say it in any sensible way is a bit tricky: reachability is defined in terms of equality, so we can't also define equality in terms of reachability. ]

454. basic_filebuf::open should accept wchar_t names

Section: [lib.filebuf.members]  Status: Open  Submitter: Bill Plauger  Date: 30 Jan 2004

    basic_filebuf *basic_filebuf::open(const char *, ios_base::open_mode);

should be supplemented with the overload:

    basic_filebuf *basic_filebuf::open(const wchar_t *, ios_base::open_mode);

Depending on the operating system, one of these forms is fundamental and the other requires an implementation-defined mapping to determine the actual filename.

[Sydney: Yes, we want to allow wchar_t filenames. Bill will provide wording.]

Proposed resolution:

Change from:

basic_filebuf<charT,traits>* open(
	const char* s,
	ios_base::openmode mode );

Effects: If is_open() != false, returns a null pointer. Otherwise, initializes the filebuf as required. It then opens a file, if possible, whose name is the NTBS s ("as if" by calling std::fopen(s,modstr)).


basic_filebuf<charT,traits>* open(
	const char* s,
	ios_base::openmode mode );

basic_filebuf<charT,traits>* open(
	const wchar_t* ws,
	ios_base::openmode mode );

Effects: If is_open() != false, returns a null pointer. Otherwise, initializes the filebuf as required. It then opens a file, if possible, whose name is the NTBS s ("as if" by calling std::fopen(s,modstr)). For the second signature, the NTBS s is determined from the WCBS ws in an implementation-defined manner.

(NOTE: For a system that "naturally" represents a filename as a WCBS, the NTBS s in the first signature may instead be mapped to a WCBS; if so, it follows the same mapping rules as the first argument to open.)


Slightly controversial, but by a 7-1 straw poll the LWG agreed to move this to Ready. The controversy was because the mapping between wide names and files in a filesystem is implementation defined. The counterargument, which most but not all LWG members accepted, is that the mapping between narrow files names and files is also implemenation defined.

[Lillehammer: Moved back to "open" status, at Beman's urging. (1) Why just basic_filebuf, instead of also basic_fstream (and possibly other things too). (2) Why not also constructors that take std::basic_string? (3) We might want to wait until we see Beman's filesystem library; we might decide that it obviates this.]

456. Traditional C header files are overspecified

Section: [lib.headers]  Status: Open  Submitter: Bill Plauger  Date: 30 Jan 2004

The C++ Standard effectively requires that the traditional C headers (of the form <xxx.h>) be defined in terms of the newer C++ headers (of the form <cxxx>). Clauses and D.5 combine to require that:

The rules were left in this form despited repeated and heated objections from several compiler vendors. The C headers are often beyond the direct control of C++ implementors. In some organizations, it's all they can do to get a few #ifdef __cplusplus tests added. Third-party library vendors can perhaps wrap the C headers. But neither of these approaches supports the drastic restructuring required by the C++ Standard. As a result, it is still widespread practice to ignore this conformance requirement, nearly seven years after the committee last debated this topic. Instead, what is often implemented is:

The practical benefit for implementors with the second approach is that they can use existing C library headers, as they are pretty much obliged to do. The practical cost for programmers facing a mix of implementations is that they have to assume weaker rules:

There also exists the possibility of subtle differences due to Koenig lookup, but there are so few non-builtin types defined in the C headers that I've yet to see an example of any real problems in this area.

It is worth observing that the rate at which programmers fall afoul of these differences has remained small, at least as measured by newsgroup postings and our own bug reports. (By an overwhelming margin, the commonest problem is still that programmers include <string> and can't understand why the typename string isn't defined -- this a decade after the committee invented namespace std, nominally for the benefit of all programmers.)

We should accept the fact that we made a serious mistake and rectify it, however belatedly, by explicitly allowing either of the two schemes for declaring C names in headers.

[Sydney: This issue has been debated many times, and will certainly have to be discussed in full committee before any action can be taken. However, the preliminary sentiment of the LWG was in favor of the change. (6 yes, 0 no, 2 abstain) Robert Klarer suggests that we might also want to undeprecate the C-style .h headers.]

Proposed resolution:

458. 24.1.5 contains unintented limitation for operator-

Section: 24.1.5 [lib.random.access.iterators]  Status: Open  Submitter: Daniel Frey  Date: 27 Feb 2004

In 24.1.5 [lib.random.access.iterators], table 76 the operational semantics for the expression "r -= n" are defined as "return r += -n". This means, that the expression -n must be valid, which is not the case for unsigned types.

[ Sydney: Possibly not a real problem, since difference type is required to be a signed integer type. However, the wording in the standard may be less clear than we would like. ]

Proposed resolution:

To remove this limitation, I suggest to change the operational semantics for this column to:

{ Distance m = n; if (m >= 0) while (m--) --r; else while (m++) ++r; return r; }

459. Requirement for widening in stage 2 is overspecification

Section: [lib.facet.num.get.virtuals]  Status: Open  Submitter: Martin Sebor  Date: 16 Mar 2004

When parsing strings of wide-character digits, the standard requires the library to widen narrow-character "atoms" and compare the widened atoms against the characters that are being parsed. Simply narrowing the wide characters would be far simpler, and probably more efficient. The two choices are equivalent except in convoluted test cases, and many implementations already ignore the standard and use narrow instead of widen.

First, I disagree that using narrow() instead of widen() would necessarily have unfortunate performance implications. A possible implementation of narrow() that allows num_get to be implemented in a much simpler and arguably comparably efficient way as calling widen() allows, i.e. without making a virtual call to do_narrow every time, is as follows:

  inline char ctype<wchar_t>::narrow (wchar_t wc, char dflt) const
      const unsigned wi = unsigned (wc);

      if (wi > UCHAR_MAX)
          return typeid (*this) == typeid (ctype<wchar_t>) ?
                 dflt : do_narrow (wc, dflt);

      if (narrow_ [wi] < 0) {
         const char nc = do_narrow (wc, dflt);
         if (nc == dflt)
             return dflt;
         narrow_ [wi] = nc;

      return char (narrow_ [wi]);

Second, I don't think the change proposed in the issue (i.e., to use narrow() instead of widen() during Stage 2) would be at all drastic. Existing implementations with the exception of libstdc++ currently already use narrow() so the impact of the change on programs would presumably be isolated to just a single implementation. Further, since narrow() is not required to translate alternate wide digit representations such as those mentioned in issue 303 to their narrow equivalents (i.e., the portable source characters '0' through '9'), the change does not necessarily imply that these alternate digits would be treated as ordinary digits and accepted as part of numbers during parsing. In fact, the requirement in [lib.locale.ctype.virtuals], p13 forbids narrow() to translate an alternate digit character, wc, to an ordinary digit in the basic source character set unless the expression (ctype<charT>::is(ctype_base::digit, wc) == true) holds. This in turn is prohibited by the C standard (,, and 5.2.1, respectively) for charT of either char or wchar_t.

[Sydney: To a large extent this is a nonproblem. As long as you're only trafficking in char and wchar_t we're only dealing with a stable character set, so you don't really need either 'widen' or 'narrow': can just use literals. Finally, it's not even clear whether widen-vs-narrow is the right question; arguably we should be using codecvt instead.]

Proposed resolution:

Change stage 2 so that implementations are permitted to use either technique to perform the comparison:

  1. call widen on the atoms and compare (either by using operator== or char_traits<charT>::eq) the input with the widened atoms, or
  2. call narrow on the input and compare the narrow input with the atoms
  3. do (1) or (2) only if charT is not char or wchar_t, respectively; i.e., avoid calling widen or narrow if it the source and destination types are the same

462. Destroying objects with static storage duration

Section: 3.6.3 [basic.start.term], 18.3 []  Status: Open  Submitter: Bill Plauger  Date: 23 Mar 2004

3.6.3 Termination spells out in detail the interleaving of static destructor calls and calls to functions registered with atexit. To match this behavior requires intimate cooperation between the code that calls destructors and the exit/atexit machinery. The former is tied tightly to the compiler; the latter is a primitive mechanism inherited from C that traditionally has nothing to do with static construction and destruction. The benefits of intermixing destructor calls with atexit handler calls is questionable at best, and very difficult to get right, particularly when mixing third-party C++ libraries with different third-party C++ compilers and C libraries supplied by still other parties.

I believe the right thing to do is defer all static destruction until after all atexit handlers are called. This is a change in behavior, but one that is likely visible only to perverse test suites. At the very least, we should permit deferred destruction even if we don't require it.

Proposed resolution:

[If this is to be changed, it should probably be changed by CWG. At this point, however, the LWG is leaning toward NAD. Implementing what the standard says is hard work, but it's not impossible and most vendors went through that pain years ago. Changing this behavior would be a user-visible change, and would break at least one real application.]

463. auto_ptr usability issues

Section: 20.4.5 []  Status: Open  Submitter: Rani Sharoni  Date: 7 Dec 2003

TC1 CWG DR #84 effectively made the template<class Y> operator auto_ptr<Y>() member of auto_ptr ( obsolete.

The sole purpose of this obsolete conversion member is to enable copy initialization base from r-value derived (or any convertible types like cv-types) case:

#include <memory>
using std::auto_ptr;

struct B {};
struct D : B {};

auto_ptr<D> source();
int sink(auto_ptr<B>);
int x1 = sink( source() ); // #1 EDG - no suitable copy constructor

The excellent analysis of conversion operations that was given in the final auto_ptr proposal ( explicitly specifies this case analysis (case 4). DR #84 makes the analysis wrong and actually comes to forbid the loophole that was exploited by the auto_ptr designers.

I didn't encounter any compliant compiler (e.g. EDG, GCC, BCC and VC) that ever allowed this case. This is probably because it requires 3 user defined conversions and in fact current compilers conform to DR #84.

I was surprised to discover that the obsolete conversion member actually has negative impact of the copy initialization base from l-value derived case:

auto_ptr<D> dp;
int x2 = sink(dp); // #2 EDG - more than one user-defined conversion applies

I'm sure that the original intention was allowing this initialization using the template<class Y> auto_ptr(auto_ptr<Y>& a) constructor ( but since in this copy initialization it's merely user defined conversion (UDC) and the obsolete conversion member is UDC with the same rank (for the early overloading stage) there is an ambiguity between them.

Removing the obsolete member will have impact on code that explicitly invokes it:

int y = sink(source().operator auto_ptr<B>());

IMHO no one ever wrote such awkward code and the reasonable workaround for #1 is:

int y = sink( auto_ptr<B>(source()) );

I was even more surprised to find out that after removing the obsolete conversion member the initialization was still ill-formed: int x3 = sink(dp); // #3 EDG - no suitable copy constructor

This copy initialization semantically requires copy constructor which means that both template conversion constructor and the auto_ptr_ref conversion member ( are required which is what was explicitly forbidden in DR #84. This is a bit amusing case in which removing ambiguity results with no candidates.

I also found exception safety issue with auto_ptr related to auto_ptr_ref:

int f(auto_ptr<B>, std::string);
auto_ptr<B> source2();

// string constructor throws while auto_ptr_ref
// "holds" the pointer
int x4 = f(source2(), "xyz"); // #4

The theoretic execution sequence that will cause a leak:

  1. call auto_ptr<B>::operator auto_ptr_ref<B>()
  2. call string::string(char const*) and throw

According to and 20.4.5/2 the auto_ptr_ref conversion member returns auto_ptr_ref<Y> that holds *this and this is another defect since the type of *this is auto_ptr<X> where X might be different from Y. Several library vendors (e.g. SGI) implement auto_ptr_ref<Y> with Y* as member which is much more reasonable. Other vendor implemented auto_ptr_ref as defectively required and it results with awkward and catastrophic code: int oops = sink(auto_ptr<B>(source())); // warning recursive on all control paths

Dave Abrahams noticed that there is no specification saying that auto_ptr_ref copy constructor can't throw.

My proposal comes to solve all the above issues and significantly simplify auto_ptr implementation. One of the fundamental requirements from auto_ptr is that it can be constructed in an intuitive manner (i.e. like ordinary pointers) but with strict ownership semantics which yield that source auto_ptr in initialization must be non-const. My idea is to add additional constructor template with sole propose to generate ill-formed, diagnostic required, instance for const auto_ptr arguments during instantiation of declaration. This special constructor will not be instantiated for other types which is achievable using 14.8.2/2 (SFINAE). Having this constructor in hand makes the constructor template<class Y> auto_ptr(auto_ptr<Y> const&) legitimate since the actual argument can't be const yet non const r-value are acceptable.

This implementation technique makes the "private auxiliary class" auto_ptr_ref obsolete and I found out that modern C++ compilers (e.g. EDG, GCC and VC) consume the new implementation as expected and allow all intuitive initialization and assignment cases while rejecting illegal cases that involve const auto_ptr arguments.

The proposed auto_ptr interface:

namespace std {
    template<class X> class auto_ptr {
        typedef X element_type;

        // construct/copy/destroy:
        explicit auto_ptr(X* p=0) throw();
        auto_ptr(auto_ptr&) throw();
        template<class Y> auto_ptr(auto_ptr<Y> const&) throw();
        auto_ptr& operator=(auto_ptr&) throw();
        template<class Y> auto_ptr& operator=(auto_ptr<Y>) throw();
        ~auto_ptr() throw();

        // members:
        X& operator*() const throw();
        X* operator->() const throw();
        X* get() const throw();
        X* release() throw();
        void reset(X* p=0) throw();

        template<class U>
        auto_ptr(U& rhs, typename
unspecified_error_on_const_auto_ptr<U>::type = 0);

One compliant technique to implement the unspecified_error_on_const_auto_ptr helper class is using additional private auto_ptr member class template like the following:

template<typename T> struct unspecified_error_on_const_auto_ptr;

template<typename T>
struct unspecified_error_on_const_auto_ptr<auto_ptr<T> const>
{ typedef typename auto_ptr<T>::const_auto_ptr_is_not_allowed type; };

There are other techniques to implement this helper class that might work better for different compliers (i.e. better diagnostics) and therefore I suggest defining its semantic behavior without mandating any specific implementation. IMO, and I didn't found any compiler that thinks otherwise, 14.7.1/5 doesn't theoretically defeat the suggested technique but I suggest verifying this with core language experts.

Further changes in standard text:

Remove section

Change 20.4.5/2 to read something like: Initializing auto_ptr<X> from const auto_ptr<Y> will result with unspecified ill-formed declaration that will require unspecified diagnostic.

Change,5,6 to read:

template<class Y> auto_ptr(auto_ptr<Y> const& a) throw();

4 Requires: Y* can be implicitly converted to X*.

5 Effects: Calls const_cast<auto_ptr<Y>&>(a).release().

6 Postconditions: *this holds the pointer returned from a.release().


template<class Y> auto_ptr& operator=(auto_ptr<Y> a) throw();

10 Requires: Y* can be implicitly converted to X*. The expression delete get() is well formed.

LWG TC DR #127 is obsolete.

Notice that the copy constructor and copy assignment operator should remain as before and accept non-const auto_ptr& since they have effect on the form of the implicitly declared copy constructor and copy assignment operator of class that contains auto_ptr as member per 12.8/5,10:

struct X {
    // implicit X(X&)
    // implicit X& operator=(X&)
    auto_ptr<D> aptr_;

In most cases this indicates about sloppy programming but preserves the current auto_ptr behavior.

Dave Abrahams encouraged me to suggest fallback implementation in case that my suggestion that involves removing of auto_ptr_ref will not be accepted. In this case removing the obsolete conversion member to auto_ptr<Y> and,5 is still required in order to eliminate ambiguity in legal cases. The two constructors that I suggested will co exist with the current members but will make auto_ptr_ref obsolete in initialization contexts. auto_ptr_ref will be effective in assignment contexts as suggested in DR #127 and I can't see any serious exception safety issues in those cases (although it's possible to synthesize such). auto_ptr_ref<X> semantics will have to be revised to say that it strictly holds pointer of type X and not reference to an auto_ptr for the favor of cases in which auto_ptr_ref<Y> is constructed from auto_ptr<X> in which X is different from Y (i.e. assignment from r-value derived to base).

Proposed resolution:

[Redmond: punt for the moment. We haven't decided yet whether we want to fix auto_ptr for C++-0x, or remove it and replace it with move_ptr and unique_ptr.]

466. basic_string ctor should prevent null pointer error

Section: 21.3.1 [lib.string.cons]  Status: Open  Submitter: Daniel Frey  Date: 10 Jun 2004

Today, my colleagues and me wasted a lot of time. After some time, I found the problem. It could be reduced to the following short example:

  #include <string>
  int main() { std::string( 0 ); }

The problem is that the tested compilers (GCC 2.95.2, GCC 3.3.1 and Comeau online) compile the above without errors or warnings! The programs (at least for the GCC) resulted in a SEGV.

I know that the standard explicitly states that the ctor of string requires a char* which is not zero. STLs could easily detect the above case with a private ctor for basic_string which takes a single 'int' argument. This would catch the above code at compile time and would not ambiguate any other legal ctors.

Proposed resolution:

[Redmond: No great enthusiasm for doing this. If we do, however, we want to do it for all places that take charT* pointers, not just the single-argument constructor. The other question is whether we want to catch this at compile time (in which case we catch the error of a literal 0, but not an expression whose value is a null pointer), at run time, or both.]

470. accessing containers from their elements' special functions

Section: 23 [lib.containers]  Status: Open  Submitter: Martin Sebor  Date: 28 Jun 2004

The standard doesn't prohibit the destructors (or any other special functions) of containers' elements invoked from a member function of the container from "recursively" calling the same (or any other) member function on the same container object, potentially while the container is in an intermediate state, or even changing the state of the container object while it is being modified. This may result in some surprising (i.e., undefined) behavior.

Read email thread starting with c++std-lib-13637 for more.

Proposed resolution:

Add to Container Requirements the following new paragraph:

    Unless otherwise specified, the behavior of a program that
    invokes a container member function f from a member function
    g of the container's value_type on a container object c that
    called g from its mutating member function h, is undefined.
    I.e., if v is an element of c, directly or indirectly calling
    c.h() from v.g() called from c.f(), is undefined.

[Redmond: This is a real issue, but it's probably a clause 17 issue, not clause 23. We get the same issue, for example, if we try to destroy a stream from one of the stream's callback functions.]

471. result of what() implementation-defined

Section: 18.6.1 [lib.exception]  Status: Open  Submitter: Martin Sebor  Date: 28 Jun 2004

[lib.exception] specifies the following:

    exception (const exception&) throw();
    exception& operator= (const exception&) throw();

    -4- Effects: Copies an exception object.
    -5- Notes: The effects of calling what() after assignment
        are implementation-defined.

First, does the Note only apply to the assignment operator? If so, what are the effects of calling what() on a copy of an object? Is the returned pointer supposed to point to an identical copy of the NTBS returned by what() called on the original object or not?

Second, is this Note intended to extend to all the derived classes in section 19? I.e., does the standard provide any guarantee for the effects of what() called on a copy of any of the derived class described in section 19?

Finally, if the answer to the first question is no, I believe it constitutes a defect since throwing an exception object typically implies invoking the copy ctor on the object. If the answer is yes, then I believe the standard ought to be clarified to spell out exactly what the effects are on the copy (i.e., after the copy ctor was called).

[Redmond: Yes, this is fuzzy. The issue of derived classes is fuzzy too.]

Proposed resolution:

473. underspecified ctype calls

Section: [lib.locale.ctype]  Status: Open  Submitter: Martin Sebor  Date: 1 Jul 2004

Most ctype member functions come in two forms: one that operates on a single character at a time and another form that operates on a range of characters. Both forms are typically described by a single Effects and/or Returns clause.

The Returns clause of each of the single-character non-virtual forms suggests that the function calls the corresponding single character virtual function, and that the array form calls the corresponding virtual array form. Neither of the two forms of each virtual member function is required to be implemented in terms of the other.

There are three problems:

1. One is that while the standard does suggest that each non-virtual member function calls the corresponding form of the virtual function, it doesn't actually explicitly require it.

Implementations that cache results from some of the virtual member functions for some or all values of their arguments might want to call the array form from the non-array form the first time to fill the cache and avoid any or most subsequent virtual calls. Programs that rely on each form of the virtual function being called from the corresponding non-virtual function will see unexpected behavior when using such implementations.

2. The second problem is that either form of each of the virtual functions can be overridden by a user-defined function in a derived class to return a value that is different from the one produced by the virtual function of the alternate form that has not been overriden.

Thus, it might be possible for, say, ctype::widen(c) to return one value, while for ctype::widen(&c, &c + 1, &wc) to set wc to another value. This is almost certainly not intended. Both forms of every function should be required to return the same result for the same character, otherwise the same program using an implementation that calls one form of the functions will behave differently than when using another implementation that calls the other form of the function "under the hood."

3. The last problem is that the standard text fails to specify whether one form of any of the virtual functions is permitted to be implemented in terms of the other form or not, and if so, whether it is required or permitted to call the overridden virtual function or not.

Thus, a program that overrides one of the virtual functions so that it calls the other form which then calls the base member might end up in an infinite loop if the called form of the base implementation of the function in turn calls the other form.

Proposed resolution:

Lillehammer: Part of this isn't a real problem. We already talk about caching. 22.1.1/6 But part is a real problem. ctype virtuals may call each other, so users don't know which ones to override to avoid avoid infinite loops.

This is a problem for all facet virtuals, not just ctype virtuals, so we probably want a blanket statement in clause 22 for all facets. The LWG is leaning toward a blanket prohibition, that a facet's virtuals may never call each other. We might want to do that in clause 27 too, for that matter. A review is necessary. Bill will provide wording.

475. May the function object passed to for_each modify the elements of the iterated sequence?

Section: 25.1.1 [lib.alg.foreach]  Status: Ready  Submitter: Stephan T. Lavavej, Jaakko Jarvi  Date: 9 Jul 2004

It is not clear whether the function object passed to for_each is allowed to modify the elements of the sequence being iterated over.

for_each is classified without explanation in [lib.alg.nonmodifying], "25.1 Non-modifying sequence operations". 'Non-modifying sequence operation' is never defined.

25(5) says: "If an algorithm's Effects section says that a value pointed to by any iterator passed as an argument is modified, then that algorithm has an additional type requirement: The type of that argument shall satisfy the requirements of a mutable iterator (24.1)."

for_each's Effects section does not mention whether arguments can be modified:

"Effects: Applies f to the result of dereferencing every iterator in the range [first, last), starting from first and proceeding to last - 1."

Every other algorithm in [lib.alg.nonmodifying] is "really" non-modifying in the sense that neither the algorithms themselves nor the function objects passed to the algorithms may modify the sequences or elements in any way. This DR affects only for_each.

We suspect that for_each's classification in "non-modifying sequence operations" means that the algorithm itself does not inherently modify the sequence or the elements in the sequence, but that the function object passed to it may modify the elements it operates on.

The original STL document by Stepanov and Lee explicitly prohibited the function object from modifying its argument. The "obvious" implementation of for_each found in several standard library implementations, however, does not impose this restriction. As a result, we suspect that the use of for_each with function objects that modify their arguments is wide-spread. If the restriction was reinstated, all such code would become non-conforming. Further, none of the other algorithms in the Standard could serve the purpose of for_each (transform does not guarantee the order in which its function object is called).

We suggest that the standard be clarified to explicitly allow the function object passed to for_each modify its argument.

Proposed resolution:

Add a nonnormative note to the Effects in 25.1.1 [lib.alg.foreach]: If the type of 'first' satisfies the requirements of a mutable iterator, 'f' may apply nonconstant functions through the dereferenced iterators passed to it.


The LWG believes that nothing in the standard prohibits function objects that modify the sequence elements. The problem is that for_each is in a secion entitled "nonmutating algorithms", and the title may be confusing. A nonnormative note should clarify that.

478. Should forward iterator requirements table have a line for r->m?

Section: 24.1.3 [lib.forward.iterators]  Status: Ready  Submitter: Dave Abrahams  Date: 11 Jul 2004

The Forward Iterator requirements table contains the following:

 expression  return type         operational  precondition
  ==========  ==================  ===========  ==========================
  a->m        U& if X is mutable, (*a).m       pre: (*a).m is well-defined.
              otherwise const U&

  r->m        U&                  (*r).m       pre: (*r).m is well-defined.

The second line may be unnecessary. Paragraph 11 of [lib.iterator.requirements] says:

In the following sections, a and b denote values of type const X, n denotes a value of the difference type Distance, u, tmp, and m denote identifiers, r denotes a value of X&, t denotes a value of value type T, o denotes a value of some type that is writable to the output iterator.

Because operators can be overloaded on an iterator's const-ness, the current requirements allow iterators to make many of the operations specified using the identifiers a and b invalid for non-const iterators.

Related issue: 477

Proposed resolution:

Remove the "r->m" line from the Forward Iterator requirements table. Change

"const X"


"X or const X"

in paragraph 11 of [lib.iterator.requirements].


This is a defect because it constrains an lvalue to returning a modifiable lvalue.

479. Container requirements and placement new

Section: 23.1 [lib.container.requirements]  Status: Open  Submitter: Herb Sutter  Date: 1 Aug 2004

Nothing in the standard appears to make this program ill-formed:

  struct C {
    void* operator new( size_t s ) { return ::operator new( s ); }
    // NOTE: this hides in-place and nothrow new

  int main() {
    vector<C> v;
    v.push_back( C() );

Is that intentional? We should clarify whether or not we intended to require containers to support types that define their own special versions of operator new.

[ Lillehammer: A container will definitely never use this overridden operator new, but whether it will fail to compile is unclear from the standard. Are containers supposed to use qualified or unqualified placement new? is somewhat relevant, but the standard doesn't make it completely clear whether containers have to use Allocator::construct(). If containers don't use it, the details of how containers use placement new are unspecified. That is the real bug, but it needs to be fixed as part of the allocator overhaul. Weak support that the eventual solution should make this code well formed. ]

Proposed resolution:

482. Swapping pairs

Section: 20.2.2 [lib.pairs], 25.2.2 [lib.alg.swap]  Status: Open  Submitter: Andrew Koenig  Date: 14 Sep 2004

(Based on recent comp.std.c++ discussion)

Pair (and tuple) should specialize std::swap to work in terms of std::swap on their components. For example, there's no obvious reason why swapping two objects of type pair<vector<int>, list<double> > should not take O(1).

Proposed resolution:

[Lillehammer: We agree it should be swappable. Howard will provide wording.]

484. Convertible to T

Section: 24.1.1 [lib.input.iterators]  Status: Open  Submitter: Chris  Date: 16 Sep 2004

From comp.std.c++:

I note that given an input iterator a for type T, then *a only has to be "convertable to T", not actually of type T.

Firstly, I can't seem to find an exact definition of "convertable to T". While I assume it is the obvious definition (an implicit conversion), I can't find an exact definition. Is there one?

Slightly more worryingly, there doesn't seem to be any restriction on the this type, other than it is "convertable to T". Consider two input iterators a and b. I would personally assume that most people would expect *a==*b would perform T(*a)==T(*b), however it doesn't seem that the standard requires that, and that whatever type *a is (call it U) could have == defined on it with totally different symantics and still be a valid inputer iterator.

Is this a correct reading? When using input iterators should I write T(*a) all over the place to be sure that the object i'm using is the class I expect?

This is especially a nuisance for operations that are defined to be "convertible to bool". (This is probably allowed so that implementations could return say an int and avoid an unnessary conversion. However all implementations I have seen simply return a bool anyway. Typical implemtations of STL algorithms just write things like while(a!=b && *a!=0). But strictly speaking, there are lots of types that are convertible to T but that also overload the appropriate operators so this doesn't behave as expected.

If we want to make code like this legal (which most people seem to expect), then we'll need to tighten up what we mean by "convertible to T".

Proposed resolution:

[Lillehammer: The first part is NAD, since "convertible" is well-defined in core. The second part is basically about pathological overloads. It's a minor problem but a real one. So leave open for now, hope we solve it as part of iterator redesign.]

485. output iterator insufficently constrained

Section: 24.1.2 [lib.output.iterators]  Status: Open  Submitter: Chris  Date: 13 Oct 2004

The note on 24.1.2 Output iterators insufficently limits what can be performed on output iterators. While it requires that each iterator is progressed through only once and that each iterator is written to only once, it does not require the following things:

Note: Here it is assumed that x is an output iterator of type X which has not yet been assigned to.

a) That each value of the output iterator is written to: The standard allows: ++x; ++x; ++x;

b) That assignments to the output iterator are made in order X a(x); ++a; *a=1; *x=2; is allowed

c) Chains of output iterators cannot be constructed: X a(x); ++a; X b(a); ++b; X c(b); ++c; is allowed, and under the current wording (I believe) x,a,b,c could be written to in any order.

I do not believe this was the intension of the standard?

Proposed resolution:

[Lillehammer: Real issue. There are lots of constraints we intended but didn't specify. Should be solved as part of iterator redesign.]

488. rotate throws away useful information

Section: 25.2.10 [lib.alg.rotate]  Status: Open  Submitter: Howard Hinnant  Date: 22 Nov 2004

rotate takes 3 iterators: first, middle and last which point into a sequence, and rearranges the sequence such that the subrange [middle, last) is now at the beginning of the sequence and the subrange [first, middle) follows. The return type is void.

In many use cases of rotate, the client needs to know where the subrange [first, middle) starts after the rotate is performed. This might look like:

  rotate(first, middle, last);
  Iterator i = advance(first, distance(middle, last));

Unless the iterators are random access, the computation to find the start of the subrange [first, middle) has linear complexity. However, it is not difficult for rotate to return this information with negligible additional computation expense. So the client could code:

  Iterator i = rotate(first, middle, last);

and the resulting program becomes significantly more efficient.

While the backwards compatibility hit with this change is not zero, it is very small (similar to that of lwg 130), and there is a significant benefit to the change.

Proposed resolution:

In 25p2, change:

  template<class ForwardIterator>
    void rotate(ForwardIterator first, ForwardIterator middle,
                ForwardIterator last);


  template<class ForwardIterator>
    ForwardIterator rotate(ForwardIterator first, ForwardIterator middle,
                           ForwardIterator last);

In 25.2.10, change:

  template<class ForwardIterator>
    void rotate(ForwardIterator first, ForwardIterator middle,
                ForwardIterator last);


  template<class ForwardIterator>
    ForwardIterator rotate(ForwardIterator first, ForwardIterator middle,
                           ForwardIterator last);

In 25.2.10 insert a new paragraph after p1:

Returns: first + (last - middle).

[ The LWG agrees with this idea, but has one quibble: we want to make sure not to give the impression that the function "advance" is actually called, just that the nth iterator is returned. (Calling advance is observable behavior, since users can specialize it for their own iterators.) Howard will provide wording. ]

[Howard provided wording for mid-meeting-mailing Jun. 2005.]

492. Invalid iterator arithmetic expressions

Section: 23 [lib.containers], 24 [lib.iterators], 25 [lib.algorithms]  Status: Open  Submitter: Thomas Mang  Date: 12 Dec 2004

Various clauses other than clause 25 make use of iterator arithmetic not supported by the iterator category in question. Algorithms in clause 25 are exceptional because of 25 [lib.algorithms], paragraph 9, but this paragraph does not provide semantics to the expression "iterator - n", where n denotes a value of a distance type between iterators.

1) Examples of current wording:

Current wording outside clause 25: [lib.list.ops], paragraphs 19-21: "first + 1", "(i - 1)", "(last - first)" [], paragraph 4: "last - first" [lib.multimap.cons], paragraph 4: "last - first" [lib.set.cons], paragraph 4: "last - first" [lib.multiset.cons], paragraph 4: "last - first" 24.4.1 [lib.reverse.iterators], paragraph 1: "(i - 1)"

[Important note: The list is not complete, just an illustration. The same issue might well apply to other paragraphs not listed here.]

None of these expressions is valid for the corresponding iterator category.

Current wording in clause 25:

25.1.1 [lib.alg.foreach], paragraph 1: "last - 1" 25.1.3 [lib.alg.find.end], paragraph 2: "[first1, last1 - (last2-first2))" 25.2.8 [lib.alg.unique], paragraph 1: "(i - 1)" 25.2.8 [lib.alg.unique], paragraph 5: "(i - 1)"

However, current wording of 25 [lib.algorithms], paragraph 9 covers neither of these four cases:

Current wording of 25 [lib.algorithms], paragraph 9:

"In the description of the algorithms operator + and - are used for some of the iterator categories for which they do not have to be defined. In these cases the semantics of a+n is the same as that of

{X tmp = a;
advance(tmp, n);
return tmp;

and that of b-a is the same as of return distance(a, b)"

This paragrpah does not take the expression "iterator - n" into account, where n denotes a value of a distance type between two iterators [Note: According to current wording, the expression "iterator - n" would be resolved as equivalent to "return distance(n, iterator)"]. Even if the expression "iterator - n" were to be reinterpreted as equivalent to "iterator + -n" [Note: This would imply that "a" and "b" were interpreted implicitly as values of iterator types, and "n" as value of a distance type], then 24.3.4/2 interfers because it says: "Requires: n may be negative only for random access and bidirectional iterators.", and none of the paragraphs quoted above requires the iterators on which the algorithms operate to be of random access or bidirectional category.

2) Description of intended behavior:

For the rest of this Defect Report, it is assumed that the expression "iterator1 + n" and "iterator1 - iterator2" has the semantics as described in current 25 [lib.algorithms], paragraph 9, but applying to all clauses. The expression "iterator1 - n" is equivalent to an result-iterator for which the expression "result-iterator + n" yields an iterator denoting the same position as iterator1 does. The terms "iterator1", "iterator2" and "result-iterator" shall denote the value of an iterator type, and the term "n" shall denote a value of a distance type between two iterators.

All implementations known to the author of this Defect Report comply with these assumptions. No impact on current code is expected.

3) Proposed fixes:

Change 25 [lib.algorithms], paragraph 9 to:

"In the description of the algorithms operator + and - are used for some of the iterator categories for which they do not have to be defined. In this paragraph, a and b denote values of an iterator type, and n denotes a value of a distance type between two iterators. In these cases the semantics of a+n is the same as that of

{X tmp = a;
advance(tmp, n);
return tmp;

,the semantics of a-n denotes the value of an iterator i for which the following condition holds: advance(i, n) == a, and that of b-a is the same as of return distance(a, b)".

Comments to the new wording:

a) The wording " In this paragraph, a and b denote values of an iterator type, and n denotes a value of a distance type between two iterators." was added so the expressions "b-a" and "a-n" are distinguished regarding the types of the values on which they operate. b) The wording ",the semantics of a-n denotes the value of an iterator i for which the following condition holds: advance(i, n) == a" was added to cover the expression 'iterator - n'. The wording "advance(i, n) == a" was used to avoid a dependency on the semantics of a+n, as the wording "i + n == a" would have implied. However, such a dependency might well be deserved. c) DR 225 is not considered in the new wording.

Proposed fixes regarding invalid iterator arithmetic expressions outside clause 25:

Either a) Move modified 25 [lib.algorithms], paragraph 9 (as proposed above) before any current invalid iterator arithmetic expression. In that case, the first sentence of 25 [lib.algorithms], paragraph 9, need also to be modified and could read: "For the rest of this International Standard, ...." / "In the description of the following clauses including this ...." / "In the description of the text below ..." etc. - anyways substituting the wording "algorithms", which is a straight reference to clause 25. In that case, 25 [lib.algorithms] paragraph 9 will certainly become obsolete. Alternatively, b) Add an appropiate paragraph similar to resolved 25 [lib.algorithms], paragraph 9, to the beginning of each clause containing invalid iterator arithmetic expressions. Alternatively, c) Fix each paragraph (both current wording and possible resolutions of DRs) containing invalid iterator arithmetic expressions separately.

5) References to other DRs:

See DR 225. See DR 237. The resolution could then also read "Linear in last - first".

Proposed resolution:

[Lillehammer: Minor issue, but real. We have a blanket statement about this in 25/11. But (a) it should be in 17, not 25; and (b) it's not quite broad enough, because there are some arithmetic expressions it doesn't cover. Bill will provide wording.]

495. Clause 22 template parameter requirements

Section: 22 [lib.localization]  Status: Ready  Submitter: Beman Dawes  Date: 10 Jan 2005

It appears that there are no requirements specified for many of the template parameters in clause 22. It looks like this issue has never come up, except perhaps for Facet.

Clause 22 isn't even listed in [lib.type.descriptions], either, which is the wording that allows requirements on template parameters to be identified by name.

So one issue is that [lib.type.descriptions] Should be changed to cover clause 22. A better change, which will cover us in the future, would be to say that it applies to all the library clauses. Then if a template gets added to any library clause we are covered.

charT, InputIterator, and other names with requirements defined elsewhere are fine, assuming the [lib.type.descriptions] fix. But there are a few template arguments names which I don't think have requirements given elsewhere:

Proposed resolution:

Change [lib.type.descriptions], paragraph 1, from:

The Requirements subclauses may describe names that are used to specify constraints on template arguments.153) These names are used in clauses 20, 23, 25, and 26 to describe the types that may be supplied as arguments by a C++ program when instantiating template components from the library.


The Requirements subclauses may describe names that are used to specify constraints on template arguments.153) These names are used in library clauses to describe the types that may be supplied as arguments by a C++ program when instantiating template components from the library.

In the front matter of class 22, locales, add:

Template parameter types internT and externT shall meet the requirements of charT (described in 21 [lib.strings]).


Again, a blanket clause isn't blanket enough. Also, we've got a couple of names that we don't have blanket requirement statements for. The only issue is what to do about stateT. This wording is thin, but probably adequate.

497. meaning of numeric_limits::traps for floating point types

Section: [lib.numeric.limits.members]  Status: Ready  Submitter: Martin Sebor  Date: 2 Mar 2005, p59 says this much about the traps member of numeric_limits:

static const bool traps;
-59- true if trapping is implemented for the type.204)
Footnote 204: Required by LIA-1.

It's not clear what is meant by "is implemented" here.

In the context of floating point numbers it seems reasonable to expect to be able to use traps to determine whether a program can "safely" use infinity(), quiet_NaN(), etc., in arithmetic expressions, that is without causing a trap (i.e., on UNIX without having to worry about getting a signal). When traps is true, I would expect any of the operations in section 7 of IEEE 754 to cause a trap (and my program to get a SIGFPE). So, for example, on Alpha, I would expect traps to be true by default (unless I compiled my program with the -ieee option), false by default on most other popular architectures, including IA64, MIPS, PA-RISC, PPC, SPARC, and x86 which require traps to be explicitly enabled by the program.

Another possible interpretation of p59 is that traps should be true on any implementation that supports traps regardless of whether they are enabled by default or not. I don't think such an interpretation makes the traps member very useful, even though that is how traps is implemented on several platforms. It is also the only way to implement traps on platforms that allow programs to enable and disable trapping at runtime.

Proposed resolution:

Change p59 to read:

True if, at program startup, there exists a value of the type that would cause an arithmetic operation using that value to trap.


Real issue, since trapping can be turned on and off. Unclear what a static query can say about a dynamic issue. The real advice we should give users is to use cfenv for these sorts of queries. But this new proposed resolution is at least consistent and slightly better than nothing.

498. Requirements for partition() and stable_partition() too strong

Section: 25.2.12 [lib.alg.partitions]  Status: Open  Submitter: Sean Parent, Joe Gottman  Date: 4 May 2005

Problem: The iterator requirements for partition() and stable_partition() [25.2.12] are listed as BidirectionalIterator, however, there are efficient algorithms for these functions that only require ForwardIterator that have been known since before the standard existed. The SGI implementation includes these (see and

Proposed resolution:

Change 25.2.12 from

template<class BidirectionalIterator, class Predicate> 
BidirectionalIterator partition(BidirectionalIterato r first, 
                                BidirectionalIterator last, 
                                Predicate pred); 


template<class ForwardIterator, class Predicate> 
ForwardIterator partition(ForwardIterator first, 
                          ForwardIterator last, 
                          Predicate pred); 

Change the complexity from

At most (last - first)/2 swaps are done. Exactly (last - first) applications of the predicate are done.


If ForwardIterator is a bidirectional_iterator, at most (last - first)/2 swaps are done; otherwise at most (last - first) swaps are done. Exactly (last - first) applications of the predicate are done.


Partition is a "foundation" algorithm useful in many contexts (like sorting as just one example) - my motivation for extending it to include forward iterators is slist - without this extension you can't partition an slist (without writing your own partition). Holes like this in the standard library weaken the argument for generic programming (ideally I'd be able to provide a library that would refine std::partition() to other concepts without fear of conflicting with other libraries doing the same - but that is a digression). I consider the fact that partition isn't defined to work for ForwardIterator a minor embarrassment.

[Mont Tremblant: Moved to Open, request motivation and use cases by next meeting. Sean provided further rationale by post-meeting mailing.]

499. Std. doesn't seem to require stable_sort() to be stable!

Section: [lib.stable.sort]  Status: New  Submitter: Prateek Karandikar  Date: 12 Apr 2005 Summary

1 The Summary provides a synopsis of the category, and introduces the first-level subclauses. Each subclause also provides a summary, listing the headers specified in the subclause and the library entities provided in each header.

2 Paragraphs labelled "Note(s):" or "Example(s):" are informative, other paragraphs are normative.

So this means that a "Notes" paragraph wouldn't be normative. stable_sort

template<class RandomAccessIterator> 
void stable_sort(RandomAccessIterat or first, RandomAccessIterator last); 

template<class RandomAccessIterator, class Compare> 
void stable_sort(RandomAccessIterat or first, RandomAccessIterator last, Compare comp);

1 Effects: Sorts the elements in the range [first, last).

2 Complexity: It does at most N(log N)^2 (where N == last - first) comparisons; if enough extra memory is available, it is N log N.

3 Notes: Stable: the relative order of the equivalent elements is preserved.

The Notes para is informative, and nowhere else is stability mentioned above.

Also, I just searched for the word "stable" in my copy of the Standard. and the phrase "Notes: Stable: the relative order of the elements..." is repeated several times in the Standard library clauses for describing various functions. How is it that stability is talked about in the informative paragraph? Or am I missing something obvious?

Proposed resolution:

501. Proposal: strengthen guarantees of lib.comparisons

Section: 20.3.3 [lib.comparisons]  Status: New  Submitter: Me <>  Date: 7 Jun 2005

"For templates greater, less, greater_equal, and less_equal, the specializations for any pointer type yield a total order, even if the built-in operators <, >, <=, >= do not."

The standard should do much better than guarantee that these provide a total order, it should guarantee that it can be used to test if memory overlaps, i.e. write a portable memmove. You can imagine a platform where the built-in operators use a uint32_t comparison (this tests for overlap on this platform) but the less<T*> functor is allowed to be defined to use a int32_t comparison. On this platform, if you use std::less with the intent of making a portable memmove, comparison on an array that straddles the 0x7FFFFFFF/0x8000000 boundary can give incorrect results.

Proposed resolution:

Add a footnote to 20.3.3/8 saying:

Given a p1 and p2 such that p1 points to N objects of type T and p2 points to M objects of type T. If [p1,p1+N) does not overlap [p2,p2+M), less returns the same value when comparing all pointers in [p1,p1+N) to all pointers in [p2,p2+M). Otherwise, there is a value Q and a value R such that less returns the same value when comparing all pointers in [p1,p1+Q) to all pointers in [p2,p2+R) and an opposite value when comparing all pointers in [p1+Q,p1+N) to all pointers in [p2+R,p2+M). For the sake of completeness, the null pointer value (4.10) for T is considered to be an array of 1 object that doesn't overlap with any non-null pointer to T. less_equal, greater, greater_equal, equal_to, and not_equal_to give the expected results based on the total ordering semantics of less. For T of void, treat it as having similar semantics as T of char i.e. less<cv T*>(a, b) gives the same results as less<cv void*>(a, b) which gives the same results as less<cv char*>((cv char*)(cv void*)a, (cv char*)(cv void*)b).

I'm also thinking there should be a footnote to 20.3.3/1 saying that if A and B are similar types (4.4/4), comp<A>(a,b) returns the same value as comp<B>(a,b) (where comp is less, less_equal, etc.). But this might be problematic if there is some really funky operator overloading going on that does different things based on cv (that should be undefined behavior if somebody does that though). This at least should be guaranteed for all POD types (especially pointers) that use the built-in comparison operators.

502. Proposition: Clarification of the interaction between a facet and an iterator

Section: [lib.locale.category]  Status: New  Submitter: Christopher Conrade Zseleghovski  Date: 7 Jun 2005


This requirement seems obvious to me, it is the essence of code modularity. I have complained to Mr. Plauger that the Dinkumware library does not observe this principle but he objected that this behaviour is not covered in the standard.

Proposed resolution:

Append the following point to

6. The implementation of a facet of Table 52 parametrized with an InputIterator/OutputIterator should use that iterator only as character source/sink respectively. For a *_get facet, it means that the value received depends only on the sequence of input characters and not on how they are accessed. For a *_put facet, it means that the sequence of characters output depends only on the value to be formatted and not of how the characters are stored.

503. more on locales

Section: 22.2 [lib.locale.categories]  Status: New  Submitter: P.J. Plauger  Date: 20 Jun 2005

a) In para. 2 we refer to "the instantiations required in Table 51" to refer to the facet *objects* associated with a locale. And we almost certainly mean just those associated with the default or "C" locale. Otherwise, you can't switch to a locale that enforces a different mapping between narrow and wide characters, or that defines additional uppercase characters.

b) para. 3 (codecvt) has the same issues.

c) (do_unshift) is even worse. It *forbids* the generation of a homing sequence for the basic character set, which might very well need one.

d) (do_length) likewise dictates that the default mapping between wide and narrow characters be taken as one-for-one.

e) 22.2.2 para. 2 (num_get/put) is both muddled and vacuous, as far as I can tell. The muddle is, as before, calling Table 51 a list of instantiations. But the constraint it applies seems to me to cover *all* defined uses of num_get/put, so why bother to say so?

f) para. 1(do_decimal_point) says "The required instantiations return '.' or L'.'.) Presumably this means "as appropriate for the character type. But given the vague definition of "required" earlier, this overrules *any* change of decimal point for non "C" locales. Surely we don't want to do that.

g) para. 2 (do_thousands_sep) says "The required instantiations return ',' or L','.) As above, this probably means "as appropriate for the character type. But this overrules the "C" locale, which requires *no* character ('\0') for the thousands separator. Even if we agree that we don't mean to block changes in decimal point or thousands separator, we should also eliminate this clear incompatibility with C.

h) para. 2 (do_grouping) says "The required instantiations return the empty string, indicating no grouping." Same considerations as for do_decimal_point.

i) para. 1 (collate) refers to "instantiations required in Table 51". Same bad jargon.

j) para. 1 (do_compare) refers to "instantiations required in Table 51". Same bad jargon.

k) 22.2.5 para. 1 (time_get/put) uses the same muddled and vacuous as num_get/put.

l) 22.2.6 para. 2 (money_get/put) uses the same muddled and vacuous as num_get/put.

m) (do_pos/neg_format) says "The instantiations required in Table 51 ... return an object of type pattern initialized to {symbol, sign, none, value}." This once again *overrides* the "C" locale, as well as any other locale."

3) We constrain the use_facet calls that can be made by num_get/put, so why don't we do the same for money_get/put? Or for any of the other facets, for that matter?

4) As an almost aside, we spell out when a facet needs to use the ctype facet, but several also need to use a codecvt facet and we don't say so.

Proposed resolution:

504. Integer types in pseudo-random number engine requirements

Section: TR1 5.1.1 [tr.rand.req]  Status: Open  Submitter: Walter Brown  Date: 3 Jul 2005

In [tr.rand.req], Paragraph 2 states that "... s is a value of integral type, g is an ... object returning values of unsigned integral type ..."

Proposed resolution:

In 5.1.1 [tr.rand.req], Paragraph 2 replace

... s is a value of integral type, g is an lvalue of a type other than X that defines a zero-argument function object returning values of unsigned integral type unsigned long int, ...

In 5.1.1 [tr.rand.seq], Table 16, replace in the line for X(s)

creates an engine with the initial internal state determined by static_cast<unsigned long>(s)

[ Mont Tremblant: Both s and g should be unsigned long. This should refer to the constructor signatures. Jens provided wording post Mont Tremblant. ]


Jens: Just requiring X(unsigned long) still makes it possible for an evil library writer to also supply a X(int) that does something unexpected. The wording above requires that X(s) always performs as if X(unsigned long) would have been called. I believe that is sufficient and implements our intentions from Mont Tremblant. I see no additional use in actually requiring a X(unsigned long) signature. u.seed(s) is covered by its reference to X(s), same arguments.

505. Result_type in random distribution requirements

Section: TR1 5.1.1 [tr.rand.req]  Status: Ready  Submitter: Walter Brown  Date: 3 Jul 2005

Table 17: Random distribution requirements

Row 1 requires that each random distribution provide a nested type "input_type"; this type denotes the type of the values that the distribution consumes.

Inspection of all distributions in [tr.rand.dist] reveals that each distribution provides a second typedef ("result_type") that denotes the type of the values the distribution produces when called.

Proposed resolution:

It seems to me that this is also a requirement for all distributions and should therefore be indicated as such via a new second row to this table 17:

X::result_type T --- compile-time

506. Requirements of Distribution parameter for variate_generator

Section: TR1 5.1.3 [tr.rand.var]  Status: Open  Submitter: Walter Brown  Date: 3 Jul 2005

Paragraph 3 requires that template argument U (which corresponds to template parameter Engine) satisfy all uniform random number generator requirements. However, there is no analogous requirement regarding the template argument that corresponds to template parameter Distribution. We believe there should be, and that it should require that this template argument satisfy all random distribution requirements.

Proposed resolution:

Consequence 1: Remove the precondition clauses [tr.rand.var]/16 and /18.

Consequence 2: Add max() and min() functions to those distributions that do not already have them.

[ Mont Tremblant: Jens reccommends NAD, min/max not needed everywhere. Marc supports having min and max to satisfy generic programming interface. ]

507. Missing requirement for variate_generator::operator()

Section: TR1 5.1.3 [tr.rand.var]  Status: Ready  Submitter: Walter Brown  Date: 3 Jul 2005

Paragraph 11 of [tr.rand.var] equires that the member template

template<class T> result_type operator() (T value);


distribution()(e, value)

However, not all distributions have an operator() with a corresponding signature.

Proposed resolution:

We therefore recommend that we insert the following precondition before paragraph 11:

Precondition: distribution().operator()(e,value) is well-formed.

508. Bad parameters for ranlux64_base_01

Section: TR1 5.1.5 [tr.rand.predef]  Status: Ready  Submitter: Walter Brown  Date: 3 Jul 2005

The fifth of these engines with predefined parameters, ranlux64_base_01, appears to have an unintentional error for which there is a simple correction. The two pre-defined subtract_with_carry_01 engines are given as:

typedef subtract_with_carry_01<float,  24, 10, 24> ranlux_base_01;
typedef subtract_with_carry_01<double, 48, 10, 24> ranlux64_base_01;

We demonstrate below that ranlux64_base_01 fails to meet the intent of the random number generation proposal, but that the simple correction to

typedef subtract_with_carry_01<double, 48,  5, 12> ranlux64_base_01;

does meet the intent of defining well-known good parameterizations.

The ranlux64_base_01 engine as presented fails to meet the intent for predefined engines, stated in proposal N1398 (section E):

In order to make good random numbers available to a large number of library users, this proposal not only defines generic random-number engines, but also provides a number of predefined well-known good parameterizations for those.

The predefined ranlux_base_01 engine has been proven [1,2,3] to have a very long period and so meets this criterion. This property makes it suitable for use in the excellent discard_block engines defined subsequently. The proof of long period relies on the fact (proven in [1]) that 2**(w*r) - 2**(w*s) + 1 is prime (w, r, and s are template parameters to subtract_with_carry_01, as defined in [tr.rand.eng.sub1]).

The ranlux64_base_01 engine as presented in [tr.rand.predef] uses w=48, r=24, s=10. For these numbers, the combination 2**(w*r)-2**(w*s)+1 is non-prime (though explicit factorization would be a challenge). In consequence, while it is certainly possible for some seeding states that this engine would have a very long period, it is not at all Òwell-knownÓ that this is the case. The intent in the N1398 proposal involved the base of the ranlux64 engine, which finds heavy use in the physics community. This is isomorphic to the predefined ranlux_base_01, but exploits the ability of double variables to hold (at least) 48 bits of mantissa, to deliver 48 random bits at a time rather than 24.

Proposed resolution:

To achieve this intended behavior, the correct template parameteriztion would be:

typedef subtract_with_carry_01<double, 48, 5, 12> ranlux64_base_01;

The sequence of mantissa bits delivered by this is isomorphic (treating each double as having the bits of two floats) to that delivered by ranlux_base_01.


  1. F. James, Comput. Phys. Commun. 60(1990) 329
  2. G. Marsaglia and A. Zaman, Ann. Appl. Prob 1(1991) 462
  3. M. Luscher, Comput. Phys. Commun. 79(1994) 100-110

509. Uniform_int template parameters

Section: TR1 [tr.rand.dist.iunif]  Status: Open  Submitter: Walter Brown  Date: 3 Jul 2005

In [tr.rand.dist.iunif] the uniform_int distribution currently has a single template parameter, IntType, used as the input_type and as the result_type of the distribution. We believe there is no reason to conflate these types in this way.

Proposed resolution:

We recommend that there be a second template parameter to reflect the distributionÕs input_type, and that the existing first template parameter continue to reflect (solely) the result_type:

template< class IntType = int, UIntType = unsigned int >
class uniform_int
  // types
  typedef  UIntType  input_type;
  typedef  IntType   result_type;

510. Input_type for bernoulli_distribution

Section: TR1 [tr.rand.dist.bern]  Status: Open  Submitter: Walter Brown  Date: 3 Jul 2005

In [tr.rand.dist.bern] the distribution currently requires;

typedef  int  input_type;

Proposed resolution:

We believe this is an unfortunate choice, and recommend instead:

typedef  unsigned int  input_type;

511. Input_type for binomial_distribution

Section: TR1 [tr.rand.dist.bin]  Status: Open  Submitter: Walter Brown  Date: 3 Jul 2005

Unlike all other distributions in TR1, this binomial_distribution has an implementation-defined input_type. We believe this is an unfortunate choice, because it hinders users from writing portable code. It also hinders the writing of compliance tests. We recommend instead:

typedef  RealType  input_type;

While this choice is somewhat arbitrary (as it was for some of the other distributions), we make this particular choice because (unlike all other distributions) otherwise this template would not publish its RealType argument and so users could not write generic code that accessed this second template parameter. In this respect, the choice is consistent with the other distributions in TR1.

We have two reasons for recommending that a real type be specified instead. One reason is based specifically on characteristics of binomial distribution implementations, while the other is based on mathematical characteristics of probability distribution functions in general.

Implementations of binomial distributions commonly use Stirling approximations for values in certain ranges. It is far more natural to use real values to represent these approximations than it would be to use integral values to do so. In other ranges, implementations reply on the Bernoulli distribution to obtain values. While TR1Õs bernoulli_distribution::input_type is specified as int, we believe this would be better specified as double.

This brings us to our main point: The notion of a random distribution rests on the notion of a cumulative distribution function, which in turn mathematically depends on a continuous dependent variable. Indeed, such a distribution function would be meaningless if it depended on discrete values such as integersÑand this remains true even if the distribution function were to take discrete steps.

Although this note is specifically about binomial_distribution::input_type, we intend to recommend that all of the random distributionsÕ input_types be specified as a real type (either a RealType template parameter, or double, as appropriate).

Of the nine distributions in TR1, four already have this characteristic (uniform_real, exponential_distribution, normal_distribution, and gamma_distribution). We have already argued the case for the binomial the remaining four distributions.

In the case of uniform_int, we believe that the calculations to produce an integer result in a specified range from an integer in a different specified range is best done using real arithmetic. This is because it involves a product, one of whose terms is the ratio of the extents of the two ranges. Without real arithmetic, the results become less uniform: some numbers become more (or less) probable that they should be. This is, of course, undesireable behavior in a uniform distribution.

Finally, we believe that in the case of the bernoulli_distribution (briefly mentioned earlier), as well as the cases of the geometric_distribution and the poisson_distribution, it would be far more natural to have a real input_type. This is because the most natural computation involves the random number delivered and the distributionÕs parameter p (in the case of bernoulli_distribution, for example, the computation is a comparison against p), and p is already specified in each case as having some real type.

Proposed resolution:

typedef  RealType  input_type;

512. Seeding subtract_with_carry_01 from a single unsigned long

Section: TR1 [tr.rand.eng.sub1]  Status: New  Submitter: Walter Brown  Date: 3 Jul 2005

Paragraph 8 specifies the algorithm by which a subtract_with_carry_01 engine is to be seeded given a single unsigned long. This algorithm is seriously flawed in the case where the engine parameter w (also known as word_size) exceeds 31 [bits]. The key part of the paragraph reads:

sets x(-r) ... x(-1) to (lcg(1)*2**(-w)) mod 1

and so forth.

Since the specified linear congruential engine, lcg, delivers numbers with a maximum of 2147483563 (just a shade under 31 bits), then when w is, for example, 48, each of the x(i) will be less than 2**-17. The consequence is that roughly the first 400 numbers delivered will be conspicuously close to either zero or one.

Unfortunately, this is not an innocuous flaw: One of the predefined engines in [tr.rand.predef], namely ranlux64_base_01, has w = 48 and would exhibit this poor behavior, while the original N1378 proposal states that these pre-defined engines are intended to be of "known good properties."

Proposed resolution:

In [tr.rand.eng.sub1], replace the "effects" clause for void seed(unsigned long value = 19780503) by

Effects: If value == 0, sets value to 19780503. In any case, with a linear congruential generator lcg(i) having parameters mlcg = 2147483563, alcg = 40014, clcg = 0, and lcg(0) = value, sets carry(-1) and x(-r) … x(-1) as if executing

linear_congruential<unsigned long, 40014, 0, 2147483563> lcg(value);
to (lcg(1) · 2-w) mod 1 … (lcg(r) · 2-w) mod 1, respectively. If x(-1) == 0, sets carry(-1) = 2-w, else sets carry(-1) = 0.

[ Jens provided revised wording post Mont Tremblant. ]


Jens: I'm using an explicit type here, because fixing the prose would probably not qualify for the (with issue 504 even stricter) requirements we have for seed(Gen&).

513. Size of state for subtract_with_carry_01

Section: TR1 [tr.rand.eng.sub1]  Status: Open  Submitter: Walter Brown  Date: 3 Jul 2005

Paragraph 3 begins:

The size of the state is r.

However, this is not quite consistent with the remainder of the paragraph which specifies a total of nr+1 items in the textual representation of the state. We recommend the sentence be corrected to match:

The size of the state is nr+1.

To give meaning to the coefficient n, it may be also desirable to move nÕs definition from later in the paragraph. Either of the following seem reasonable formulations:

With n=..., the size of the state is nr+1.
The size of the state is nr+1, where n=... .

Proposed resolution:

[ Jens: I plead for "NAD" on the grounds that "size of state" is only used as an argument for big-O complexity notation, thus constant factors and additions don't count. ]

514. Size of state for subtract_with_carry

Section: TR1 [tr.rand.eng.sub]  Status: Open  Submitter: Walter Brown  Date: 3 Jul 2005

Paragraph 2 begins:

The size of the state is r.

However, the next sentence specifies a total of r+1 items in the textual representation of the state, r specific xÕs as well as a specific carry. This makes a total of r+1 items that constitute the size of the state, rather than r.

Proposed resolution:

We recommend the sentence be corrected to match:

The size of the state is r+1.

[ Jens: I plead for "NAD" on the grounds that "size of state" is only used as an argument for big-O complexity notation, thus constant factors and additions don't count. ]

515. Random number engine traits

Section: TR1 5.1.2 [tr.rand.synopsis]  Status: New  Submitter: Walter Brown  Date: 3 Jul 2005

To accompany the concept of a pseudo-random number engine as defined in Table 17, we propose and recommend an adjunct template, engine_traits, to be declared in [tr.rand.synopsis] as:

template< class PSRE >
class engine_traits;

This templateÕs primary purpose would be as an aid to generic programming involving pseudo-random number engines. Given only the facilities described in tr1, it would be very difficult to produce any algorithms involving the notion of a generic engine. The intent of this proposal is to provide, via engine_traits<>, sufficient descriptive information to allow an algorithm to employ a pseudo-random number engine without regard to its exact type, i.e., as a template parameter.

For example, today it is not possible to write an efficient generic function that requires any specific number of random bits. More specifically, consider a cryptographic application that internally needs 256 bits of randomness per call:

template< class Eng, class InIter, class OutIter >
void crypto( Eng& e, InIter in, OutIter out );

Without knowning the number of bits of randomness produced per call to a provided engine, the algorithm has no means of determining how many times to call the engine.

In a new section [tr.rand.eng.traits], we proposed to define the engine_traits template as:

template< class PSRE >
class engine_traits
  static  std::size_t  bits_of_randomness = 0u;
  static  std::string  name()  { return "unknown_engine"; }
  // TODO: other traits here

Further, each engine described in [tr.rand.engine] would be accompanied by a complete specialization of this new engine_traits template.

Proposed resolution:

516. Seeding subtract_with_carry_01 using a generator

Section: TR1 [tr.rand.eng.sub1]  Status: New  Submitter: Walter Brown  Date: 3 Jul 2005

Paragraph 6 says:

... obtained by successive invocations of g, ...

We recommend instead:

... obtained by taking successive invocations of g mod 2**32, ...

as the context seems to require only 32-bit quantities be used here.

Proposed resolution:

517. Should include name in external representation

Section: TR1 5.1.1 [tr.rand.req]  Status: New  Submitter: Walter Brown  Date: 3 Jul 2005

The last two rows of Table 16 deal with the i/o requirements of an engine, specifying that the textual representation of an engineÕs state, appropriately formatted, constitute the engineÕs external representation.

This seems adequate when an engineÕs type is known. However, it seems inadequate in the context of generic code, where it becomes useful and perhaps even necessary to determine an engineÕs type via input.

Proposed resolution:

We therefore recommend that, in each of these two rows of Table 16, the text "textual representation" be expanded so as to read "engine name followed by the textual representation."

518. Are insert and erase stable for unordered_multiset and unordered_multimap?

Section: TR1 6.3 [tr.hash]  Status: Review  Submitter: Matt Austern  Date: 3 Jul 2005

Issue 371 deals with stability of multiset/multimap under insert and erase (i.e. do they preserve the relative order in ranges of equal elements). The same issue applies to unordered_multiset and unordered_multimap.

Proposed resolution:

519. Data() undocumented

Section: TR1 6.2.2 [tr.array.array]  Status: Ready  Submitter: Pete Becker  Date: 3 Jul 2005

array<>::data() is present in the class synopsis, but not documented.

Proposed resolution:

Add a new section, after

T*       data()
const T* data() const;

Returns: elems.

Change to:

In the case where N == 0, begin() == end(). The return value of data() is unspecified.

520. Result_of and pointers to data members

Section: TR1 3.6 [tr.func.bind]  Status: New  Submitter: Pete Becker  Date: 3 Jul 2005

In the original proposal for binders, the return type of bind() when called with a pointer to member data as it's callable object was defined to be mem_fn(ptr); when Peter Dimov and I unified the descriptions of the TR1 function objects we hoisted the descriptions of return types into the INVOKE pseudo-function and into result_of. Unfortunately, we left pointer to member data out of result_of, so bind doesn't have any specified behavior when called with a pointer to member data.

Proposed resolution:

[ Pete and Peter will provide wording. ]

521. Garbled requirements for argument_type in reference_wrapper

Section: TR1 2.1.2 [tr.util.refwrp.refwrp]  Status: New  Submitter: Pete Becker  Date: 3 Jul 2005

2.1.2/3, second bullet item currently says that reference_wrapper<T> is derived from unary_function<T, R> if T is:

a pointer to member function type with cv-qualifier cv and no arguments; the type T1 is cv T* and R is the return type of the pointer to member function;

The type of T1 can't be cv T*, 'cause that's a pointer to a pointer to member function. It should be a pointer to the class that T is a pointer to member of. Like this:

a pointer to a member function R T0::f() cv (where cv represents the member function's cv-qualifiers); the type T1 is cv T0*

Similarly, bullet item 2 in 2.1.2/4 should be:

a pointer to a member function R T0::f(T2) cv (where cv represents the member function's cv-qualifiers); the type T1 is cv T0*

Proposed resolution:

522. Tuple doesn't define swap

Section: TR1 6.1 [tr.tuple]  Status: New  Submitter: Andy Koenig  Date: 3 Jul 2005

Tuple doesn't define swap(). It should.

Proposed resolution:

523. regex case-insensitive character ranges are unimplementable as specified

Section: TR1 7 []  Status: New  Submitter: Eric Niebler  Date: 1 Jul 2005

A problem with TR1 regex is currently being discussed on the Boost developers list. It involves the handling of case-insensitive matching of character ranges such as [Z-a]. The proper behavior (according to the ECMAScript standard) is unimplementable given the current specification of the TR1 regex_traits<> class template. John Maddock, the author of the TR1 regex proposal, agrees there is a problem. The full discussion can be found at (first message copied below). We don't have any recommendations as yet.

-- Begin original message --

The situation of interest is described in the ECMAScript specification (ECMA-262), section

"Even if the pattern ignores case, the case of the two ends of a range is significant in determining which characters belong to the range. Thus, for example, the pattern /[E-F]/i matches only the letters E, F, e, and f, while the pattern /[E-f]/i matches all upper and lower-case ASCII letters as well as the symbols [, \, ], ^, _, and `."

A more interesting case is what should happen when doing a case-insentitive match on a range such as [Z-a]. It should match z, Z, a, A and the symbols [, \, ], ^, _, and `. This is not what happens with Boost.Regex (it throws an exception from the regex constructor).

The tough pill to swallow is that, given the specification in TR1, I don't think there is any effective way to handle this situation. According to the spec, case-insensitivity is handled with regex_traits<>::translate_nocase(CharT) -- two characters are equivalent if they compare equal after both are sent through the translate_nocase function. But I don't see any way of using this translation function to make character ranges case-insensitive. Consider the difficulty of detecting whether "z" is in the range [Z-a]. Applying the transformation to "z" has no effect (it is essentially std::tolower). And we're not allowed to apply the transformation to the ends of the range, because as ECMA-262 says, "the case of the two ends of a range is significant."

So AFAICT, TR1 regex is just broken, as is Boost.Regex. One possible fix is to redefine translate_nocase to return a string_type containing all the characters that should compare equal to the specified character. But this function is hard to implement for Unicode, and it doesn't play nice with the existing ctype facet. What a mess!

-- End original message --

[ John Maddock adds: ]

One small correction, I have since found that ICU's regex package does implement this correctly, using a similar mechanism to the current TR1.Regex.

Given an expression [c1-c2] that is compiled as case insensitive it:

Enumerates every character in the range c1 to c2 and converts it to it's case folded equivalent. That case folded character is then used a key to a table of equivalence classes, and each member of the class is added to the list of possible matches supported by the character-class. This second step isn't possible with our current traits class design, but isn't necessary if the input text is also converted to a case-folded equivalent on the fly.

ICU applies similar brute force mechanisms to character classes such as [[:lower:]] and [[:word:]], however these are at least cached, so the impact is less noticeable in this case.

Quick and dirty performance comparisons show that expressions such as "[X-\\x{fff0}]+" are indeed very slow to compile with ICU (about 200 times slower than a "normal" expression). For an application that uses a lot of regexes this could have a noticeable performance impact. ICU also has an advantage in that it knows the range of valid characters codes: code points outside that range are assumed not to require enumeration, as they can not be part of any equivalence class. I presume that if we want the TR1.Regex to work with arbitrarily large character sets enumeration really does become impractical.

Finally note that Unicode has:

Three cases (upper, lower and title). One to many, and many to one case transformations. Character that have context sensitive case translations - for example an uppercase sigma has two different lowercase forms - the form chosen depends on context(is it end of a word or not), a caseless match for an upper case sigma should match either of the lower case forms, which is why case folding is often approximated by tolower(toupper(c)).

Probably we need some way to enumerate character equivalence classes, including digraphs (either as a result or an input), and some way to tell whether the next character pair is a valid digraph in the current locale.

Hoping this doesn't make this even more complex that it was already,

Proposed resolution:

524. regex named character classes and case-insensitivity don't mix

Section: TR1 7 []  Status: New  Submitter: Eric Niebler  Date: 1 Jul 2005

This defect is also being discussed on the Boost developers list. The full discussion can be found here:

-- Begin original message --

Also, I may have found another issue, closely related to the one under discussion. It regards case-insensitive matching of named character classes. The regex_traits<> provides two functions for working with named char classes: lookup_classname and isctype. To match a char class such as [[:alpha:]], you pass "alpha" to lookup_classname and get a bitmask. Later, you pass a char and the bitmask to isctype and get a bool yes/no answer.

But how does case-insensitivity work in this scenario? Suppose we're doing a case-insensitive match on [[:lower:]]. It should behave as if it were [[:lower:][:upper:]], right? But there doesn't seem to be enough smarts in the regex_traits interface to do this.

Imagine I write a traits class which recognizes [[:fubar:]], and the "fubar" char class happens to be case-sensitive. How is the regex engine to know that? And how should it do a case-insensitive match of a character against the [[:fubar:]] char class? John, can you confirm this is a legitimate problem?

I see two options:

1) Add a bool icase parameter to lookup_classname. Then, lookup_classname( "upper", true ) will know to return lower|upper instead of just upper.

2) Add a isctype_nocase function

I prefer (1) because the extra computation happens at the time the pattern is compiled rather than when it is executed.

-- End original message --

For what it's worth, John has also expressed his preference for option (1) above.

Proposed resolution:

525. type traits definitions not clear

Section: TR1 4.5 [tr.meta.unary]  Status: New  Submitter: Robert Klarer  Date: 11 Jul 2005

It is not completely clear how the primary type traits deal with cv-qualified types. And several of the secondary type traits seem to be lacking a definition.

Proposed resolution:

526. Is it undefined if a function in the standard changes in parameters?

Section: 23.1.1 [lib.sequence.reqmts]  Status: New  Submitter: Chris Jefferson  Date: 14 Sep 2005

Problem: There are a number of places in the C++ standard library where it is possible to write what appear to be sensible ways of calling functions, but which can cause problems in some (or all) implementations, as they cause the values given to the function to be changed in a way not specified in standard (and therefore not coded to correctly work). These fall into two similar categories.

1) Parameters taken by const reference can be changed during execution of the function


Given std::vector<int> v:

v.insert(v.begin(), v[2]);

v[2] can be changed by moving elements of vector

Given std::list<int> l:


Will delete the first element, and then continue trying to access it. This is particularily vicious, as it will appear to work in almost all cases.

2) A range is given which changes during the execution of the function: Similarly,

v.insert(v.begin(), v.begin()+4, v.begin()+6);

This kind of problem has been partly covered in some cases. For example std::copy(first, last, result) states that result cannot be in the range [first, last). However, does this cover the case where result is a reverse_iterator built from some iterator in the range [first, last)? Also, std::copy would still break if result was reverse_iterator(last + 1), yet this is not forbidden by the standard


One option would be to try to more carefully limit the requirements of each function. There are many functions which would have to be checked. However as has been shown in the std::copy case, this may be difficult. A simpler, more global option would be to somewhere insert text similar to:

If the execution of any function would change either any values passed by reference or any value in any range passed to a function in a way not defined in the definition of that function, the result is undefined.

Such code would have to at least cover chapters 23 and 25 (the sections I read through carefully). I can see no harm on applying it to much of the rest of the standard.

Some existing parts of the standard could be improved to fit with this, for example the requires for 25.2.1 (Copy) could be adjusted to:

Requires: For each non-negative integer n < (last - first), assigning to *(result + n) must not alter any value in the range [first + n, last).

However, this may add excessive complication.

One other benefit of clearly introducing this text is that it would allow a number of small optimisations, such as caching values passed by const reference.

Proposed resolution:

527. tr1::bind has lost its Throws clause

Section: TR1 3.6.3 [tr.func.bind.bind]  Status: New  Submitter: Peter Dimov  Date: 01 Oct 2005

The original bind proposal gives the guarantee that tr1::bind(f, t1, ..., tN) does not throw when the copy constructors of f, t1, ..., tN don't.

This guarantee is not present in the final version of TR1.

I'm pretty certain that we never removed it on purpose. Editorial omission? :-)

Proposed resolution:

528. TR1: issue 6.19 vs (and

Section: TR1 6.3.4 [tr.unord.unord]  Status: New  Submitter: Paolo Carlini  Date: 12 Oct 2005

while implementing the resolution of issue 6.19 I'm noticing the following: according to (and, for unordered_set and unordered_multiset:

"The iterator and const_iterator types are both const types. It is unspecified whether they are the same type"

Now, according to the resolution of 6.19, we have overloads of insert with hint and erase (single and range) both for iterator and const_iterator, which, AFAICS, can be meaningful at the same time *only* if iterator and const_iterator *are* in fact different types.

Then, iterator and const_iterator are *required* to be different types? Or that is an unintended consequence? Maybe the overloads for plain iterators should be added only to unordered_map and unordered_multimap? Or, of course, I'm missing something?

Proposed resolution:

Add to (and

2 ... The iterator and const_iterator types are both const constant iterator types. It is unspecified whether they are the same type. If they are the same type, those signatures that become otherwise indistinguishable collapse into a single signature.

----- End of document -----