Document number:P0542R2
Date: 2017-11-26
Audience: Core Evolution Working Group

Reply to: J. Daniel Garcia (

Support for contract based programming in C++

G. Dos Reis, J. D. Garcia, J. Lakos, A. Meredith, N. Myers, B. Stroustrup

1. Introduction

This paper is based on P0380 (P0380R1 [1]). All changes are relative to latest working draft (N4700 [2]).

2. Summary of wording

2.1. A new attributes syntax

To simplify the way that contracts are specified, and in line with our previous design paper, we propose a new syntax that may be used for attributes.

We propose this new syntax to be usable by attributes taking a single argument, which is a valid conditional expression.

[[contract-attribute: conditional-expression]]
where a contract-attribute is one of the following: expects, ensures, assert.

To avoid confusion, only the colon syntax for attributes is permitted in contract specifications

We also needed to support the idea of assertion levels needed by contracts. For this reason, we have introduced the concept of an attribute modifier that may appear after the attribute token itself.

[[contract-attribute modifier: conditional-expression]]
In this way we may specify contracts with assertion levels easily. We require that each attribute using the new proposed attribute syntax explicitly lists its accepted modifiers (if any).

In the case of contract attributes valid modifiers are: always, axiom, default, and audit

Finally, we needed to introduce the ability to define the return value to be used in postconditions. We allow, that an expects attribute lists an identifier which is associated with the return value of a function.

[[expects modifier identifier: conditional-expression]

With all this changes we can easily specify a contract:

int f(int x)
  [[expects audit: x>0]]
  [[ensures axiom res: res>1]];

void g() {
  int x = f(5);
  int y = f(12);
  [[assert: x+y>0]]

Note that while assert(expression) would expand as a function-like macro with the appropriate header, assert: is not a function-like invocation, so does not expand.

2.2. Functions versus function types

The current standard establishes a distinction between an attribute applied to a function and to the function type (the normative text uses the form "appertain to function type"). With that approach there would be a difference between the following cases:

[[attribute]] void f(); // Attribute applied to function
void f [[attribute]] (); // Attribute applied to function
void f() [[attribute]]; // Attribute applied to function type
Only the third option is interesting for contract attributes as the preconditions and postconditions need make use of function's parameters.

void f(int x, int y)
  [[expects: x>0]]
  [[expects: y!=0]]
  [[ensures result: result > x+y]];
Consequently contracts attributes (as any other attribute in that syntactical location) appertain to the function type. However, they are not part of the function type.

Note that this does not solve the issue of being able to use attributes on lambda expressions (see Core issue 2097). In fact, until that issue is not solved it will not be possible to specify preconditions and postconditions for lambda expressions.

void f() {
  // Not currently supported
  auto increment = [](int x) [[expects: x>0]] { return x+1; };
  // ...

2.3 Contracts repetition

We require that any redeclaration of a function either has the contract or completely omits it.

int f(int x) 
  [[expects: x>0]]
  [[ensures r: r>0]];

int f(int x); // OK. No contract.

int f(int x)
  [[expects: x>=0]]; // Error missing ensures and different expects condition

int f(int x)
  [[expects: x>0]]
  [[ensures r: r>0]]; //OK. Same contract.

Different argument names in redeclaration would be usually considered irrelevant.

int f(int x) 
  [[expects: x>0]]
  [[ensures r: r>0]];

int f(int y)
  [[expects: y>0]]    // Should be OK
  [[ensures z: z>0]]; // Should be OK

Consequently, we require that contracts are the same in redeclarations. That means that:

2.4 Structured bindings and postconditions

One might imagine using structured bindings in postconditions:

std::tuple f() 
  [[ensures [x,y]: x>0 && y.size()>0]];

However, we decided that this is something that might be considered for a future version. The same effect can be achieved currently as follows:

std::tuple f() 
  [[ensures r: get<0>(r)>0 && get<1>(r).size()>0]];

2.5 Information of contract_violation

The information in contract_violation could be partially represented by a source_location object, from the Library Fundamentals V2 Technical Specification.

However, we defer this decision for a future version of this proposal.

2.6 Name lookup of contracts

Name lookup resolution in contracts may interact with the use of different build modes.

There are two answers here. The first one would be to make resolution dependent on the current build mode, requiring that only the contracts that would be evaluated in the current build mode need to parse correctly and pass the name lookup.

A second solution would be to make name lookup independent of build mode. In that case, all contracts would be required to pass name lookup independently of their assertion level. We have selected this second solution.

2.7 Identical contracts

We are also requiring in the wording that a redeclaration of a function that contains a contract needs to use the same contract (in the sense of ODR) that was present in the first declaration of the function.

The exact meaning would be to require contracts to be lexically the same token by token. This is a simpler definition, but would require that a redeclaration uses also the same names for functions parameters (if/when they are used in the contract).

A second solution would be to require the contracts to be logically equivalent which seems to introduce a number of additional implementation challenges.

A third option is to say that the functions must be textually equivalent except for a change of (parameter) variable names, but otherwise having the same structure. We have selected this option.

We have taken the route of requiring contract expressions to be odr-identical, except for the change of function parameter names.

2.8 Throwing violation handler

If a violation handler throws an exception, it is necessary to clarify what is the effect when the continuation mode is off.

One option could be that the exception propagates as the handler did not return. However, that design option would open the opportunity for continuation when the continuation has been set to off.

Another design alternative would be to unconditionally invoke terminate().

2.9 Additional information in contract violation

Besides original information in contract_violation, a new member has been added to store the assertion_level. This value contains a string with the assertion-level of the contract that has been violated.

2.10 Invoking the handler

The proposal does not support the direct invocation of the violation handler. Allowing so, would imply access to handler supplied by the user, and could result into a security issue. Instead, we have added an additional assertion-level named always. Such assertion cannot be disbled and the check is performed even when the program is built with build-level set to off.

void f() {
 int x=get_value();
 [[assert always: x>0]]; // Invoke handler if x non-positive
 // ...
 if (x!=0) [[assert always: false]]; // Invoke handler if x!=0
 // ...
 [[assert always:false]]; // Unconditionally invoke handler
 // ...

This assertion level is available only for [[assert]]. A future extension migh consider the usefulness of always for preconditions and postconditions.

Background of always level
The addition of the always assertion level was introduced during the Kona meeting. We reproduce here the relevant results from straw polls in the Evolution Working Group.

Question SF F N A SA
Accept and proceed to LEWG 13 6 5 4 4
Accept and proceed to LEWG without always 5 13 9 5 2

Also, an up-down vote was taken:

Proposal as is Proposal wihtout always
14 9

2.11 Initialization of contract_violation objects

When a contract is broken, a contract_violation needs to be created with the corresponding information. There are several options on how such object should be populated with information.

Among the available options, one could be to leave this details as something to be defined by implementations. Otherwise, the exact population approach would need to be standardized.

This proposal establishes some constraints on the values that a contract violation object should hold.

3. Questions about contracts programming

What is the effect of violating a contract while evaluating the check for another expression

Nothing special needs to be considered. When the first contract is violated the corresponding action is taken.

bool positive(const int * p) [[expects: p!=nullptr]] {
  return *p > 0;

bool g(int * p) [[expects: positive(p)]];

void test() {
  g(nullptr); // Contract violation when calling positive(nullptr)

Contract attribute as identifier

What happens if you try to use an identifier named as a contract attribute (e.g. requires, audit, ...)? Example:

X f(X & audit) [[ensures audit: audit.valid()]];

This is valid code. The first audit is interpreted as a contract-level. Then, the conditional-expression identifies the second audit correctly as the function argument.

4. Proposed Wording

In 6.2/6 [basic.def.odr], add a new bullet after bullet 6.5:

In 10.6.1/1 [dcl.attr.grammar], modify the production for attribute as follows:

[[attribute-using-prefixopt  attribute-list]]

Add a new section 10.6.11 Contracts attributes [dcl.attr.contracts]

1. Contract attributes are used to specify to preconditions, postconditions, and assertions for functions.

[[ expects contract-levelopt  : conditional-expression ]]
[[ ensures contract-levelopt  identifieropt : conditional-expression ]]
[[ assert contract-levelopt  : conditional-expression ]]

2. A contract-attribute-specifier using expects is a precondition. It expresses a function's expectation on its arguments and/or the state of other objects using a predicate that should hold upon entry into the function.

3. A contract-attribute-specifier using ensures is a postcondition. It expresses a condition that a function should ensure for the return value and/or the state of objects using a predicate that should hold upon exit from the function.

4. A contract-attribute-specifier using assert is an assertion. It expresses a condition that should be satisfied where it appears in a function body.

5. A precondition or postcondition may be applied to the function type of a function declaration. The first declaration of a function shall specify all preconditions and postconditions (if any) of the function. Subsequent declarations shall either specify no preconditions and postconditions or the same list of preconditions and postconditions. Two lists of preconditions and postconditions are the same if they consist of the same preconditions and postconditions in the same order. Two preconditions or postconditions are the same if their contract levels are the same and their conditional-expressions are the same. Two conditional-expressions contained in contract-attribute-specifiers are the same if they would satisfy the one-definition rule (6.2 [basic.def.odr]) if they appeared in function definitions, except for renaming of parameters and return value identifiers (if any).

6. An assertion may be applied to a null statement (9.2 [stmt.expr]). The conditional-expression of an assertion may odr-use any object that can be accessed from the statement it is applied to.

7. Preconditions, postconditions, and assertions are collectively called contracts. A contract shall have no observable effect in a a program where all contracts would be satisfied if they were evaluated.

8. The conditional-expression of a contract-attribute-specifier is a potentially-evaluated expression (6.2 [basic.def.odr]). If evaluating the conditional-expression would modify a non-local object, the behavior is undefined. If the conditional-expression of a contract-attribute-specifier appearing in a constexpr function odr-uses a non-local object that is not constexpr, the program is ill-formed. [Example

void push(int x, queue & q)
  [[expects: !q.full()]]
  [[ensures: !q.empty()]]
  [[assert: q.is_valid()]];

int min=-42;
constexpr int max=42;

constexpr int g(int x)
  [[expects: min<=x]] // error
  [[expects: x<max]] // OK
  [[assert: 2*x < max]];
  [[assert: ++min > 0]]; // undefined
end example]

9. If the contract-level of a contract-attribute-specifier is absent, it is assumed to be default. [Note: An always contract-level is expected to be used for those contracts where the cost of run-time checking is assumed to be very small compared to the cost of executing the function and that should be checked regardless of the build mode. A default contract-level is expected to be used for those contracts where the cost of run-time checking is assumed to be small (or at least not expensive) compared to the cost of executing the function. An audit contract-level is expected to be used for those contracts where the cost of run-time checking is assumed to be large (or at least significant) compared to the cost of executing the function. An axiom contract-level is expected to be used for those contracts that are formal comments and are not evaluated at run-time. — end note]

10. A translation may be performed with one of the following build levels: off, default, or audit. A translation with build level set to off performs checking for always contracts. A translation with build level set to default performs checking for always and default contracts. A translation with build level set to audit performs checking for always, default, and audit contracts. [Note: The mechanism for selecting the build level is implementation-defined. If no build level is selected, the build level is default. — end note] There shall be no programmatic way of setting, modifying or querying the build level of a translation unit.

11. If a function has multiple preconditions or postconditions that would be checked, their evaluation will be performed in the order they appear lexically.

void f(int * p)
  [[expects: p!=nullptr]]
  [[expects: *p == 0]] // Evaluated after p!=nullptr
  *p = 1;

12. A violation handler function is a function that is invoked when a contract violation is detected and that has the following signature:

void(const std::contract_violation &);
There shall not be any programmatic way of setting or modifying which violation handler is called in the event of a contract violation. It shall be implementation defined how the violation handler is established for a program and how the std::contract_violation argument value is set. If a precondition is violated, the source location of the violation shall be the source location of the invocation to fhe function. If a postcondition is violated, the source location of the violation shall be the source location of the function definition. If an assertion is violated, the source location of the violation shall be the source location of statement to which the assertion is applied to.

13. If a user-provided violation handler exits by throwing an exception and a contract is violated in a call to a function with a non-throwing exception specification, then the behavior is as if the exception was thrown within the function body. [Note: The function std::terminate() will be invoked. No stack unwinding will be performed. — end note] [Example:

void f(int x) noexcept [[expects: x>0]];

void g() {
  f(0); // std::terminate() if violation handler throws
end example]

14. A translation may be performed with a violation continuation mode, which can be: off or on. A translation with a violation continuation mode set to off shall terminate execution by invoking std::terminate() after completing the execution of the violation handler. A translation with a violation continuation mode set to on shall continue execution after completing the execution of the violation handler. [Note: If no continuation mode is selected, the default continuation mode is off. — end note] [Note: A continuation mode set to on provides the opportunity to install a logging handler to instrument a pre-existing code base and fix errors before enforcing checks. — end note] [Example:

void f(int x) [[expects: x > 0]];

void g() {
  f(0); // std::terminate() after handler if continuation mode is off
        // Proceeds after handler if continuation mode is on
end example]

Add a new section Interface contracts [dcl.attr.contracts.interface]

1. The contract-attribute-specifiers expects and ensures may be only applied to function types. They may appear multiple times applied to a function type with the same or different contract-levels. [Example:

int z;

bool is_prime(int k);

void f(int x)
  [[expects: x>0]]
  [[expects audit: is_prime(k)]]
  [[ensures: z>10]]
end example]

2. A postcondition may introduce an identifier to represent the return value of the function. [Example:

int f(char * c)
  [[ensures res: res>0 && c!=nulpptr]];

int g(double * p)
  [[ensures audit res: res!=0 && p!=nullptr && *p<=0.0]];
end example]

3. If a postcondition odr-uses in its conditional-expression a parameter value and the function body modifies that value the program is ill-formed. [Example:

int f(int x)
  [[ensures r: r==x]] 
  return ++x; // Ill-formed: x modified

int g(int * p)
  [[ensures r: p!=nullptr]] 
  *p = 42; // OK. p is not modified
end example]

4. The conditional-expression of a precondition or a postcondtion of a function may odr-use the function's arguments. If the function is a function template or a member function of a class template, the conditional-expression may odr-use the template arguments.

5. The conditional-expression of a member function shall not use members that cannot be accessed by a caller to that member function. [Example:

class X {
  int v() const;
  void f() [[expects: x>0]]; // Ill-formed
  void g() [[expects: v()>0]]; // OK
  int w();
  void h() [[expects: x>0]]; // Ill-formed
  void i() [[ensures: y>0]]; // OK
  void j() [[ensures: w()>0]]; // OK
  int y;
  void k() [[expects: x>0]]; // OK
  int x;

class Y : public X {
  void a() [[expects: v()>0]]; // OK
  void b() [[ensures: w()>0]]; // Ill-formed
  void c() [[expects: x>0]]; // Ill formed
  void d() [[expects: w()>0]]; // OK
  void e() [[ensures: x>0]]; // Ill-formed
end example]

6. A function pointer shall not include preconditions or postconditions. A call through a function pointer to functions with preconditions or postconditions shall perform contract assertions checking once. [Example:

typedef int (*fpt)() [[ensures r: r!=0]]; // Ill-formed

int g(int x) 
  [[expects: x>=0]] 
  [[ensures r: r>x]]
  return x+1;

int (*pf)(int) = g; // OK
end example]

Add at the end of clause 13.3 [class.virtual]:

18. An overriding function shall have the same list of preconditions and postconditions as the overridden function. The list of preconditions and postconditions in the overriding function may be omitted, in which case it is implicitly assumed to be the list of the overridden function; if there is more than one overridden function all such lists shall be the same.

Modify clause [compliance]:

2. A freestanding implementation has an implementation-defined set of headers. This set shall include at least the headers shown in Table 19.

Table 19 — C++ headers for freestanding implementations
Subclause Header(s)
21.2 Types <cstddef>
21.3 Implementation properties <cfloat> <limits> <climits>
21.4 Integer types <cstdint>
21.5 Start and termination <cstdlib>
21.6 Dynamic memory management <new>
21.7 Type identification <typeinfo>
21.8 Contract violation handling <contract>
21.89 Exception handling <exception>
21.910 Initializer lists <initializer_list>
21.1011 Other runtime support <cstdalign> <cstdarg> <cstdbool>
23.15 Type traits <type_traits>
Clause 32 Atomics <atomic>
D.4.2, D.4.3 Deprecated headers <cstdalign> <cstdbool>
Modify clause 21.1/2 [support.general]:

2. The following subclauses describe common type definitions used throughout the library, characteristics of the predefined types, functions supporting start and termination of a C++ program, support for dynamic memory management, support for dynamic type identification, support for contract violation handling, support for exception processing, support for initializer lists, and other runtime support, as summarized in Table 32.

Table 32 — Language support library summary
Subclause Header(s)
21.2 Common definitions <cstddef>
21.3 Implementation properties <limits>
21.4 Integer types <cstdint>
21.5 Start and termination <cstdlib>
21.6 Dynamic memory management <new>
21.7 Type identification <typeinfo>
21.8 Contract violation handling <contract>
21.89 Exception handling <exception>
21.910 Initializer lists <initializer_list>
21.1011 Other runtime support <csignal>
Add a new section 21.9 [support.contract], after 21.8 [support.exception]

21.9 Contract violation handling

1. The header <contract> defines a type for reporting information about contract violations generated by the implementation.

21.9.1 Header <contract> synopsys

namespace std {
  class contract_violation;

21.9.2 Class contract_violation

namespace std {
  class contract_violation {
    int line_number() const noexcept;
    string_view file_name() const noexcept;
    string_view function_name() const noexcept;
    string_view comment() const noexcept;
    string_view assertion_level() const noexcept;

1. The class contract_violation describes information about a contract violation generated by the implementation.

int line_number() const noexcept;

2. Returns: The source code line number where the contract violation happened (10.6.11/12 [dcl.attr.contracts]).

3. Remarks: An implementation may return -1 if the location is unknown.

string_view file_name() const noexcept;

4. Returns: The source file name where the contract violation happened (10.6.11/12 [dcl.attr.contracts]).

5. Remarks: An implementation may return nullptr if the location is unknown.

string_view function_name() const noexcept;

6. Returns: The name of the function where the contract violation happened (10.6.11/12 [dcl.attr.contracts]).

7. Remarks: An implementation may return nullptr if the function is unknown.

string_view comment() const noexcept;

8. Returns: The text of the contract that was violated.

9. Remarks: The text will include a textual representation from the conditional-expression that was not satisfied.

string_view assertion_level() const noexcept;

10. Returns: The text with the assertion-level of the contract that was violated.


Thanks to Jens Maurer for his great help in the detailed wording.

Alexander Beels, Andrzej Krzemienski and Melissa Mears reviewed previous versions of this document.


[1] G. Dos Reis, J. D. Garcia, J. Lakos, A. Meredith, N. Myers, B. Stroustrup. A contract design. P0380R1. July, 2016.
[2] Richard Smith. Working Draft, Standard for Programming Language C++. N4700 October, 2017.